Simple-to-use and portable device for free chlorine determination based on microwave-assisted synthesized carbon dots and smartphone images

Ionic liquid-based yellow-emitting carbon dots for fluorescence-smartphone dual-mode detection of vitamin B6 in milk

The determination of vitamin B6 (VB6) in food is of great significance due to its vital role in maintaining health and its necessity for ingestion through dietary sources. Therefore, based on ionic liquid-based yellow-emitting carbon dots (Y-CDs), a novel fluorescence-smartphone dual-mode method was first developed. The present method was applied to the detection of VB6 in milk. In the fluorescence method, the formation of complexes between VB6 and Y-CDs results in a significant decrease of the fluorescence intensity of Y-CDs. VB6 in milk samples was successfully determined according to this method, which exhibited a low detection limit (5 × 10-5 mg/mL) and excellent recoveries (98.80%-103.80%), demonstrating its feasibility in real sample analysis. In addition, the smartphone-based analysis method was established by researching the correlation between different VB6 concentrations and the (R + B) values of Y-CDs. When this method was applied, the detection process of VB6 was simplified. By combining the two methods, the possibility of incorrect analysis results can be effectively reduced, and the reliability of detection results can be improved through cross-validation of the two methods. Compared with traditional chromatography and electrochemical methods, the dual-mode method was more rapid, convenient, accurate, and suitable for the detection of VB6.

Development of a Portable Residual Chlorine Detection Device with a Combination of Microfluidic Chips and LS-BP Algorithm to Achieve Accurate Detection of Residual Chlorine in Water

Chlorine is widely used for sterilization and disinfection of water, but the presence of excess residual chlorine in water poses a substantial threat to human health. At present, there is no portable device which can achieve accurate, rapid, low-cost, and convenient detection of residual chlorine in water. Therefore, it is necessary to develop a device that can perform accurate, rapid, low-cost, and convenient detection of residual chlorine in water. In this study, a portable residual chlorine detection device was developed. A microfluidic chip was studied to achieve efficient mixing of two-phase flow. This microfluidic chip was used for rapid mixing of reagents in the portable residual chlorine detection device, reducing the consumption of reagents, detection time, and device volume. A deep learning algorithm was proposed for predicting residual chlorine concentration in water, achieving precise detection. Firstly, the microfluidic chip structure for detecting mixed reagents was optimized, and the microfluidic chip was fabricated by a 3D-printing method. Secondly, a deep learning (LS-BP) algorithm was constructed and proposed for predicting residual chlorine concentration in water, which can realize dual-channel signal reading. Thirdly, the corresponding portable residual chlorine detection device was developed, and the detection device was compared with residual chlorine detection devices and methods in other studies. The comparison results indicate that the portable residual chlorine detection device has high detection accuracy, fast detection speed, low cost, and good convenience. The excellent performance of the portable residual chlorine detection device makes it suitable for detecting residual chlorine in drinking water, swimming pool water, aquaculture and other fields.

Carbon dots@noble metal nanoparticle composites: research progress report

Carbon dots@noble metal nanoparticle composites are formed by combining carbon dots and metal nanoparticles using various strategies. Carbon dots exhibit a reducing ability and function as stabilisers; consequently, metal-ion solutions can be directly reduced by them to synthesise gold, silver, and gold-silver alloy particles. Carbon dots@gold/silver/gold-silver particle composites have demonstrated the potential for several practical applications owing to their superior properties and simple preparation process. Until now, several review articles have been published to summarise fluorescent carbon dots or noble metal nanomaterials. Compared with metal-free carbon dots, carbon dots@noble metal nanoparticles have a unique morphology and structure, resulting in new physicochemical properties, which allow for sensing, bioimaging, and bacteriostasis applications. Therefore, to promote the effective development of carbon dots@noble metal nanoparticle composites, this paper primarily reviews carbon dots@gold/silver/gold-silver alloy nanoparticle composites for the first time in terms of the following aspects. (1) The synthesis strategies of carbon dots@noble metal nanoparticle composites are outlined. The principle and function of carbon dots in the synthesis strategies are examined. The advantages and disadvantages of these methods and composites are analysed. (2) The characteristics and properties of such composites are described. (3) The applications of these composite materials are summarised. Finally, the potentials and limitations of carbon dots@noble metal nanoparticle composites are discussed, thus laying the foundation for their further development.

Application of three-dimensional printing technology in environmental analysis: A review

The development of environmental analysis devices with high performance is essential to assess the potential risks of environmental pollutants. However, it is still challenging to develop environmental analysis equipment with miniaturization, portability, and high sensitivity based on traditional processing techniques. In recent years, the popularity of 3D printing technology (3DP) with high precision, low cost, and unlimited design freedom has provided opportunities to solve the existing challenges of environmental analysis. 3D printing has brought solutions to promote the high performance and versatility of environmental analysis equipment by optimizing printing materials, enhancing equipment structure, and integrating multidisciplinary technology. In this paper, we comprehensively review the latest progress in 3D printing in various aspects of environmental analysis procedures, including but not limited to sample collection, pretreatment, separation, and detection. We highlight their advantages and challenges in determining various environmental contaminants through passive sampling, solid-phase extraction, chromatographic separation, and mass spectrometry detection. The manufacturing of 3D-printed environmental analysis devices is also discussed. Finally, we look forward to their development prospects and challenges.

The Fabrication and Mechanism of a Crystalline Organic Fluorescent Probe Based on Photoinduced Electron Transfer

The response performances of the crystalline organic fluorescence probe are highly dependent on the long-range ordered arrangement of crystalline structure. Herein, a novel organic crystalline fluorescent probe with a high quantum yield was established through the rapid self-assembly of 1,2,4,5-Tetrakis (4-carboxyphenyl) benzene (H4TCPB) and DMF molecules. Each H4TCPB, which connects to four DMF molecules through hydrogen bonds, acts as the structural unit. The building units are packed by π-π, lone pair···π, and lone pair···lone pair interactions to form solid-state crystalline materials. H4TCPB·4DMF exhibits distinct blue fluorescent under UV light, while the quantum yield is as high as 89.02% and the fluorescence lifetime is 1.95 ns. The H4TCPB·4DMF nanocrystal exhibits a specific fluorescence quench sensibility to tetracycline (TC), compared with the common chemicals and ions in environmental water. Moreover, the test results can be obtained quickly and are easily visible to the naked eye. The limit of detection for TC is as low as 12 nM in an aqueous solution. Spectral analysis and density functional theory (DFT) theoretical calculations were used to explain the fluorescence quenching mechanism of H4TCPB·4DMF toward TC, which could be attributed to the photoinduced electron transfer occurring from H4TCPB·4DMF to TC. Our work enriches the database of crystalline luminescent materials and provides theoretical support for the design and mechanical studies of organic fluorescent probes.

Chlorination in the pandemic times: The current state of the art for monitoring chlorine residual in water and chlorine exposure in air

During the COVID-19 pandemic, the use of chlorine-based disinfectants has surged due to their excellent performance and cost-effectiveness in intercepting the spread of the virus and bacteria in water and air. Many authorities have demanded strict chlorine dosage for disinfection to ensure sufficient chlorine residual for inactivating viruses and bacteria while not posing harmful effects to humans as well as the environment. Reliable chlorine sensing techniques have therefore become the keys to ensure a balance between chlorine disinfection efficiency and disinfection safety. Up to now, there is still a lack of comprehensive review that collates and appraises the recently available techniques from a practical point of view. In this work, we intend to present a detailed overview of the recent advances in monitoring chlorine in both dissolved and gaseous forms aiming to present valuable information in terms of method accuracy, sensitivity, stability, reliability, and applicability, which in turn guides future sensor development. Data on the analytical performance of different techniques and environmental impacts associated with the dominated chemical-based techniques are thus discussed. Finally, this study concludes with highlights of gaps in knowledge and trends for future chlorine sensing development. Due to the increasing use of chlorine in disinfection and chemical synthesis, we believe the information present in this review is a relevant and timely resource for the water treatment industry, healthcare sector, and environmental organizations.

A Continuously Tunable Full-Color Emission Nitrogen-Doped Carbon Dots and for Ultrasensitive and Highly Selective Detection of Ascorbic Acid

Nitrogen-doped carbon dots exhibiting excitation-dependent full-color emissions (F-NCDs) were prepared via the one-step hydrothermal method with citric acid and phenylenediamine. Specifically, the emission wavelength of the F-NCDs tuned from 452 nm to 602 nm due to the introduction of new energy levels by C=O and C=N functional groups. We exploited its stability in illumination, ionic strength, and pH, as well as its specificity, sensitivity, especially in ascorbic acid (AA) detection. F-NCDs could measure the AA concentration in the linear ranges of 0~0.1 and 0.1~1 mmol/L with the detection limit (LOD, S/N = 3) as low as 2.6 nmol/L. Additionally, we successfully detected AA in bovine serum with our F-NCDs and obtained the result within 1 min. Because of full-color emission features, we believe our F-NCDs have a great potential in fluorescent sensor detection.

Detection of free chlorine in water using graphene-like carbon based chemiresistive sensors

Free chlorine is the most commonly used water disinfectant. Measuring its concentration during and after water treatment is crucial to ensure its effectiveness. However, many of the existing methods do not allow for continuous on-line monitoring. Here we demonstrate a solid state chemiresistive sensor using graphene-like carbon (GLC) that overcomes that issue. GLC films that were either bare or non-covalently functionalized with the redox-active phenyl-capped aniline tetramer (PCAT) were successfully employed to quantify aqueous free chlorine, although functionalized devices showed better performance. The response of the sensors to increasing concentrations of free chlorine followed a Langmuir adsorption isotherm in the two tested ranges: 0.01–0.2 ppm and 0.2–1.4 ppm. The limit of detection was estimated to be 1 ppb, permitting the detection of breaches in chlorine filters. The devices respond to decreasing levels of free chlorine without the need for a reset, allowing for the continuous monitoring of fluctuations in the concentration. The maximum sensor response and saturation concentration were found to depend on the thickness of the GLC film. Hence, the sensitivity and dynamic range of the sensors can be tailored to different applications by adjusting the thickness of the films. Tap water samples from a residential area were tested using these sensors, which showed good agreement with standard colorimetric measurement methods. The devices did not suffer from interferences in the presence of ions commonly found in drinking water. Overall, these sensors are a cost-effective option for the continuous automated monitoring of free chlorine in drinking water.

Chemiresistive sensors based on graphene-like carbon films are very stable and sensitive. They can be used for continuous online monitoring of free chlorine.