Headspace solid-phase microextraction based on the metal-organic framework CIM-80(Al) coating to determine volatile methylsiloxanes and musk fragrances in water samples using gas chromatography and mass spectrometry

Overview of Liquid Sample Preparation Techniques for Analysis, Using Metal-Organic Frameworks as Sorbents

The preparation of samples for instrumental analysis is the most essential and time-consuming stage of the entire analytical process; it also has the greatest impact on the analysis results. Concentrating the sample, changing its matrix, and removing interferents are often necessary. Techniques for preparing samples for analysis are constantly being developed and modified to meet new challenges, facilitate work, and enable the determination of analytes in the most comprehensive concentration range possible. This paper focuses on using metal-organic frameworks (MOFs) as sorbents in the most popular techniques for preparing liquid samples for analysis, based on liquid-solid extraction. An increase in interest in MOFs-type materials has been observed for about 20 years, mainly due to their sorption properties, resulting, among others, from the high specific surface area, tunable pore size, and the theoretically wide possibility of their modification. This paper presents certain advantages and disadvantages of the most popular sample preparation techniques based on liquid-solid extraction, the newest trends in the application of MOFs as sorbents in those techniques, and, most importantly, presents the reader with a summary, which a specific technique and MOF for the desired application. To make a tailor-made and well-informed choice as to the extraction technique.

Supramolecular Materials as Solid-Phase Microextraction Coatings in Environmental Analysis

Solid-phase microextraction (SPME) has been widely proposed for the extraction, clean-up, and preconcentration of analytes of environmental concern. Enrichment capabilities, preconcentration efficiency, sample throughput, and selectivity in extracting target compounds greatly depend on the materials used as SPME coatings. Supramolecular materials have emerged as promising porous coatings to be used for the extraction of target compounds due to their unique selectivity, three-dimensional framework, flexible design, and possibility to promote the interaction between the analytes and the coating by means of multiple oriented functional groups. The present review will cover the state of the art of the last 5 years related to SPME coatings based on metal organic frameworks (MOFs), covalent organic frameworks (COFs), and supramolecular macrocycles used for environmental applications.

Synthetic musks in the natural environment: Sources, occurrence, concentration, and fate-A review of recent developments (2010-2023)

Synthetic musks (SMs) have served as cost-effective substitutes for natural musk compounds in personal care and daily chemical products for decades. Their widespread use has led to their detection in various environmental matrices, raising concerns about potential risks. Despite numerous studies on SM levels in different natural environments, a systematic review of their contemporary presence is lacking. This review aims to address this gap by summarising recent research developments on SMs in diverse natural environments, including river water, lake water, seawater, estuarine water, groundwater, snow, meltwater, sediments, aquatic suspended matter, soils, sands, outdoor air, and atmospheric particulate matter. Covering the period from 2010 to 2023, the review focuses on four SM categories: nitro, polycyclic, macrocyclic, and alicyclic. It systematically examines their sources, occurrences, concentrations, spatial and temporal variations, and fate. The literature reveals widespread detection of SMs in the natural environment (freshwater and sediments in particular), with polycyclic musks being the most studied group. Both direct (e.g., wastewater discharges) and indirect (e.g., human recreational activities) sources contribute to SM presence. Levels of SMs vary greatly among studies with higher levels observed in certain regions, such as sediments in Southeast Asia. Spatial and temporal variations are also evident. The fate of SMs in the environment depends on their physicochemical properties and environmental processes, including bioaccumulation, biodegradation, photodegradation, adsorption, phase exchange, hydro-dilution effects. Biodegradation and photodegradation can decrease SM levels, but may produce more persistent and eco-toxic products. Modelling approaches have been employed to analyse SM fate, especially for indirect processes like photodegradation or long-distance atmospheric transport. Future studies should further investigate the complex fate if SMs and their environmental influence. This review enhances understanding of SM status in the natural environment and supports efforts to control environmental contamination.

A critical review of distribution, toxicological effects, current analytical methods and future prospects of synthetic musks in aquatic environments

Synthetic musks (SMs) have gained widespread utilization in daily consumer products, leading to their widespread dissemination in aquatic environments through various pathways. Over the past few decades, the production of SMs has consistently risen, prompting significant concern over their potential adverse impacts on ecosystems and human health. Although several studies have focused on the development of analytical techniques for detecting SMs in biological samples and cosmetic products, a comprehensive evaluation of their global distribution in diverse aquatic media and biological matrices remains lacking. This review aims to provide an up-to-date overview of the occurrence of SMs in both aquatic and various biological matrices, investigating their worldwide distribution trends, assessing their ecological toxicity, and comparing different methodologies for processing and analysis of SMs. The findings underscore the prevalence of polycyclic musks as predominant SMs, with consumption of various products in different countries leading to contrasting distribution of contaminants. Furthermore, the migration of SMs from sediments to the water phase is investigated, indicating the role of solid-phase reservoirs. Incomplete degradation of SMs in the environment could contribute to their accumulation in aquatic systems, impacting the growth and oxidative stress of aquatic organisms, and having a possibility of genotoxicity to them. Human exposure data highlight substantial risks for vulnerable populations such as pregnant women and infants. Moreover, contemporary methods for SMs analysis are presented in this review, particularly focusing on advancements made in the last five years. Finally, research enhancement and critical questions regarding the analysis of SMs are provided, offering suggestions for future research endeavors.

Three-dimensional rose-like zinc oxide fiber coating for simultaneous extraction of polychlorinated biphenyls and polycyclic aromatic hydrocarbons by headspace solid phase microextraction

The three-dimensional (3D) rose-like zinc oxide (ZnO) material was prepared by a simple one-step CTAB-assisted hydrothermal strategy and used as a headspace solid-phase microextraction (HS-SPME) coating. Polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) were analyzed by gas chromatography with flame ionization detector (GC-FID), and conclusively applied to ultrasensitive detection in lake and river water. Compared with one-dimensional (1D) pencil-like ZnO, the layer-by-layer petal-like structure could fully expose mass adsorption sites on the surface, which could significantly improve the adsorption. The enrichment factors with 7535-8595 for PCBs and 3855-7320 for PAHs were achieved. The established method provided a satisfactory linear range (0.005-30 ng·mL-1), coefficient (R2 > 0.9978), ultra-low limit detection (1-3 pg·mL-1), and long service life (≥ 150 times). The recoveries of 83.42-120.86 % were obtained in the real detection application of lake and river water. This work demonstrated that 3D rose-like ZnO with low cost, simple synthesis, fast extraction ability and high enrichment performance was an ideal coating material, which was hoped to enrich other compounds with similar structures with PCBs and PAHs.

Volatile Methylsiloxanes in Complex Samples: Recent Updates on Pretreatment and Analysis Methods

Volatile methylsiloxanes (VMSs) are massively produced chemicals having applications in industry and home because of their physical and chemical characteristics. They are used in personal care products such as cosmetics, household coatings, cleaners, skin care products, and others. Resultantly, large number of VMSs are discharged into air where they can be subjected to atmospheric migrations over long distances causing toxic and estrogenic effects, persistence, and bioaccumulations. Many institutions have taken measures to control VMSs. They require accurate, rapid, and sensitive pretreatment and analysis methods for diverse samples. Herein, the pretreatment and determination methods of VMSs as reported in recent years are reviewed and summarized. Pretreatments include commonly methods such as membrane-assisted solvent extraction, liquid-liquid extraction, and others, while novel methods are solid phase extraction, solid phase microextraction, diverse liquid phase microextraction and others. Analyses are made through gas chromatography-based methods. In addition, the advantages, and disadvantages of techniques are compared, and the prospects of pretreatment and analysis methods are discussed.

Detection of Counterfeit Perfumes by Using GC-MS Technique and Electronic Nose System Combined with Chemometric Tools

The Scientific Committee on Cosmetic and Non-Food Products has identified 26 compounds that may cause contact allergy in consumers when present in concentrations above certain legal thresholds in a product. Twenty-four of these compounds are volatiles and can be analyzed by gas chromatography-mass spectrometry (GC-MS) or electronic nose (e-nose) technologies. This manuscript first describes the use of the GC-MS approach to identify the main volatile compounds present in the original perfumes and their counterfeit samples. The second part of this work focusses on the ability of an e-nose system to discriminate between the original fragrances and their counterfeits. The analyses were carried out using the headspace of the aqueous solutions. GC-MS analysis revealed the identification of 10 allergens in the perfume samples, some of which were only found in the imitated fragrances. The e-nose system achieved a fair discrimination between most of the fragrances analyzed, with the counterfeit fragrances being clearly separated from the original perfumes. It is shown that associating the e-nose system to the appropriate classifier successfully solved the classification task. With Principal Component Analysis (PCA), the three first principal components represented 98.09% of the information in the database.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Zeolitic imidazolate framework-8 modified magnetic halloysite nanotube-based solid phase extraction for the analysis of carbamate pesticides by ultra-high performance liquid chromatography tandem mass spectrometry

Zeolitic imidazolate framework-8 modified magnetic halloysite nanotube (MHNTs@ZIF-8) composites were synthesized and evaluated for the first time as an efficient sorbent for the magnetic solid-phase extraction (mSPE) of carbamate pesticides (CPs) from water samples. MHNTs were prepared by coprecipitation, and MHNTs@ZIF-8 composites were assembled in situ at room temperature. After characterization, MHNTs@ZIF-8 was used to extract pirimicarb, propoxur, carbaryl, isoprocarb and fenobucarb via π-π stacking interaction and hydrophobic interaction between the imidazole skeleton of ZIF-8 and benzene rings or benzene-like rings in CPs, as well as the hydrogen bond formed between O in CPs and H in ZIF-8. The effects of the amount of sorbent, ionic strength, type and volume of desorption solvent and adsorption/desorption time were investigated. Under optimum conditions, good linearity was obtained for the analysis of CPs by ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) with R² ≥ 0.9992. The limits of quantification range from 3 to 40 ng L^-1 in water. Relative standard deviations (RSDs) were <7%, n = 5, within a batch and <9% among batches. The spiked recoveries were between 81 and 104%. The proposed method has been successfully applied to the determination of CPs in various water samples.

Recent applications of organic molecule-based framework porous materials in solid-phase microextraction for pharmaceutical analysis

Sample preparation is an indispensable part of detection of complex samples in pharmaceutical analysis. Solid-phase microextraction (SPME) has obtained a lot of attention due to its advantages of time saving, less solvent and easily automation. A variety of functional materials are used as sorbents in SPME to carry out selective and high extraction. This review centers around the recent applications of organic molecule-based framework porous materials, such as metal organic frameworks (MOFs) and covalent organic frameworks (COFs), as SPME coating materials mainly focus on pharmaceutical analysis in food, environment, and biological samples. Four representative extraction devices are introduced, including on-fiber SPME, in-tube SPME, thin film SPME, stir bar SPME. The application prospect of other organic porous materials as sorbents for pharmaceutical analysis are also discussed, such as hyper crosslinked polymers (HCPs) and conjugated microporous polymers (CMPs). The progresses and discusses are provided to offer references for further research focusing on application and development of organic molecule-based framework porous materials in the field of SPME.

Covalent organic framework as adsorbent for ultrasound-assisted dispersive (micro)solid phase extraction of polycyclic synthetic fragrances from seawater followed by fluorescent determination

In this work, a new analytical approach based on ultrasound-assisted dispersive (micro)solid phase extraction (US-D-μSPE) using TpBD-Me₂ covalent organic framework (COF) as adsorbent for simple, rapid and selective fluorescent determination of two polycyclic synthetic fragrances in seawater, i.e., 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethyl-cyclopenta-(γ)-2-benzopyran (HHCB), branded galaxolide®, and 7-acetyl-1,1,3,4,4,6-hexamethyltetralin (AHTN), branded tonalide®, is proposed. Different parameters involved in both adsorption and desorption steps were optimized in order to obtain the best results. High adsorption efficiencies in the range of 91.2-97.8% were achieved for both analytes. Desorption efficiencies of ∼98% for AHTN and HHCB were obtained using methanol as solvent, rendering the material recyclable with merely minor losses in adsorption efficiency after five consecutive cycles of adsorption/desorption. Limits of detection (LODs) were 0.082 μg L^-1 and 0.070 μg L^-1 for AHTN and HHCB, respectively. The proposed method was successfully applied for the analysis of seawater without the need for a previous sample treatment, e.g., pH adjustment. Recoveries in the range of 90.4-101.2% with a relative standard deviation of 5.8% were obtained for both fragrances. The results proved the great capacity of TpBD-Me₂ COF for the selective sorption of polycyclic fragrances in combination with fluorescent detection, being highly promising for application to environmental monitoring of other emerging organic pollutants.

Adsorptive removal of dyes from wastewater using a metal-organic framework: A review

Water pollution from synthetic dyes is a growing environmental concern because many dyes have carcinogenic effects on humans and aquatic life. Adsorption is a widely used technology for the separation and removal of dyes from wastewater. However, the dye removal process using conventional adsorbents is not sufficiently efficient for industrial wastewater. Metal-organic frameworks (MOFs) addresses these drawbacks. MOF showed excellent dye removal and degradation capacity owing to its multifunctionality, water-stability, large surface area, tunable pore size and recyclability. Magnetic MOFs retained excellent performance up to several consecutive cycles. Modified MOFs performed as Fenton-like catalysis process which generated abundant reactive radicals that degraded complex organic dyes into simple and less toxic forms which were further adsorbed onto the MOF. This review systematically compiles in-depth studies on the adsorptive removal of dyes from wastewater, MOF adsorption mechanisms, major influencing factors, to adsorption efficiency of MOFs. While all MOFs adsorb dyes through electrostatic attraction, the type of MOF, presence of functional groups, ligands, and pH significantly control the adsorption mechanism. Before developing an MOF, optimization and upgradation of factors and interaction between available adsorption site and adsorbate is needed. Finally, the prospects and new frontiers of MOFs in sustainable water treatment is discussed.