Facile preparation of Cu-doped carbon dots for naked-eye discrimination of phenylenediamine isomers and highly sensitive ratiometric fluorescent detection of H2O2

Platinum-based fluorescent nanozyme-driven "loong frolic pearls" multifunctional nanoplatform for tri-mode ultrasensitive detection and synergistic sterilization of Burkholderia gladioli

Rapid and accurate detection of Burkholderia gladioli (B. gladioli) and effective sterilization are crucial for ensuring food safety. Hence, a novel "loong frolic pearls" platform based on platinum-based fluorescent nanozymes (Pt-OCDs) and strand exchange amplification (SEA) was reported. Magnetic nanoparticles were modified on primer SEAF, while Pt-OCDs were covalently coupled with primer SEA-R. The highly efficient amplification capability of SEA permitted the accumulation of a large number of double-labeled amplicons. After magnetic adsorption, the supernatant was detected in reverse direction to collect colorimetric-fluorescence-photothermal signal values, enabling ultra-precise detection within 1 h. Furthermore, the Pt-based multifunctional nanoplatform generated abundant •OH and 1O2, which synergistically attacked B. gladioli and its biofilm, resulting in significant bactericidal efficacy within 30 min. This "triple-detection and double-sterilization" platform has been successfully applied in the field of food analysis with good recovery rates and immediate control over B. gladioli, thus demonstrating promising prospects for broad applications.

A low iridium content greatly improves the peroxidase-like activity of noble metal nanozymes for sensitive colorimetric detection

The enzyme-like activity of noble metal nanomaterials has been widely demonstrated. However, as an important noble metal, iridium (Ir) and its alloy nanomaterials have been less studied, particularly regarding the effect of Ir content on enzyme-like activity. Here, we demonstrated for the first time that a low Ir content can greatly improve the peroxidase-like activity of Pt-based nanozymes. When the weight percentage of Ir was 3.45% in trimetallic PtAuIr hollow nanorods (HNRs) and 2.86% in bimetallic PtIr HNRs, their specific activity increased by approximately 70% compared to their PtAu and Pt counterparts, respectively. However, a slightly higher percentage of Ir significantly diminished the enhancement effect on their specific activity. Density functional theory (DFT) calculations show that the rate-determining step (RDS) energy barrier of the nanozyme with low Ir content is lower than that of the nanozyme with slightly higher Ir content. Furthermore, we studied the kinetic properties of the PtAuIr nanozyme using TMB as the substrate. Its Michaelis-Menten constant (Km) and Vmax were 1.756 mM and 2.152 × 10-6 M s-1, respectively. Additionally, a colorimetric detection platform based on the PtAuIr nanozyme was established and applied to detect o-phenylenediamine (OPD), with a detection limit as low as 0.076 μM. This study highlights the important role of the Ir content in Pt-based nanozymes and demonstrates that PtAuIr nanozymes have potential applications in environmental detection.

Fluorescent sensor based on bismuth metal-organic frameworks (Bi-MOFs) mimic enzyme for H2O2 detection in real samples and distinction of phenylenediamine isomers

Although peroxidase-like nano-enzymes have been widely utilized in biosensors, nano-enzyme based biosensors are seldom used for both quantitative analysis of H2O2 and differentiation of isomers of organic compounds simultaneously. In this study, a dual-functional mimetic enzyme-based fluorescent sensor was constructed using metal-organic frameworks (Bi-MOFs) with exceptional oxidase activity and fluorescence properties. This mimetic enzyme sensor facilitated quantitative analysis of H2O2 and accurate discrimination of phenylenediamine isomers. The sensor exhibited a wide linear range (0.5-400 μM) and low detection limit (0.16 μM) for the detection of H2O2. Moreover, the sensor can also be used for the discrimination of phenylenediamine isomers, in which the presence of o-phenylenediamine (OPD) leads to the appearance of a new fluorescence emission peak at 555 nm, while the presence of p-phenylenediamine (PPD) significantly quenched its fluorescence due to the internal filtration effect. The proposed strategy exhibited a commendable capability in distinguishing phenylenediamine isomers, thereby paving the way for novel applications of MOFs in the field of environmental science.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

Iodide-Mediated Etching of Gold Nanostar for the Multicolor Visual Detection of Hydrogen Peroxide

A multicolor visual method for the detection of hydrogen peroxide (H₂O₂) was reported based on the iodide-mediated surface etching of gold nanostar (AuNS). First, AuNS was prepared by a seed-mediated method in a HEPES buffer. AuNS shows two different LSPR absorbance bands at 736 nm and 550 nm, respectively. Multicolor was generated by iodide-mediated surface etching of AuNS in the presence of H₂O₂. Under the optimized conditions, the absorption peak Δλ had a good linear relationship with the concentration of H₂O₂ with a linear range from 0.67~66.67 μmol L^-1, and the detection limit is 0.44 μmol L^-1. It can be used to detect residual H₂O₂ in tap water samples. This method offered a promising visual method for point-of-care testing of H₂O₂-related biomarkers.

Nitrogen-doped carbon dots: Recent developments in its fluorescent sensor applications

Doped carbon dots have attracted great attention from researchers across disciplines because of their unique characteristics, such as their low toxicity, physiochemical stability, photostability, and outstanding biocompatibility. Nitrogen is one of the most commonly used elements for doping because of its sizeable atomic radius, strong electronegativity, abundance, and availability of electrons. This distinguishes them from other atoms and allows them to perform distinctive roles in various applications. Here, we have reviewed the most current breakthroughs in nitrogen-doped CDs (N-CDs) for fluorescent sensor applications in the last five years. The first section of the article addresses several synthetic and sustainable ways of making N-CDs. Next, we briefly reviewed the fluorescent features of N-CDs and their sensing mechanism. Furthermore, we have thoroughly reviewed their fluorescent sensor applications as sensors for cations, anions, small molecules, enzymes, antibiotics, pathogens, explosives, and pesticides. Finally, we have discussed the N-CDs' potential future as primary research and how that may be used. We hope that this study will contribute to a better understanding of the principles of N-CDs and the sensory applications that they can serve.

Emerging metal doped carbon dots for promising theranostic applications

As a bridge between organic fluorophores and inorganic quantum dots, carbon dots (CDs) have been recognized as emerging nanotheranostics for biomedical applications owing to their distinctive merits such as superior optical properties, flexible modification, adjustable functionalities, and remarkable photoactive therapeutic outcome, etc. Compared to metal free CDs, the introduction of metal ion in CDs endowed metal-doped CDs (MCDs) with tunable optical properties and new intrinsic properties, thereby illustrating its different capabilities from metal-free CDs for bioimaging and therapy. This review aims to summarize the recent progress of photonic MCDs as emerging nanoagent for theranostic application such as disease-related diagnostic (involving biosensing and bioimaging) and cancer therapy. The challenges and potential development of MCDs in nanotheranostic fields are also discussed.

Immobilized glucose oxidase on hierarchically porous COFs and integrated nanozymes: a cascade reaction strategy for ratiometric fluorescence sensors

Covalent organic frameworks (COFs) with uniform porosity, good stability, and desired biocompatibility can function as carriers of immobilized enzymes. However, the obstructed pores or partially obstructed pores have hindered their applicability after loading enzymes. In this study, the hierarchical COFs were prepared as an ideal support to immobilize glucose oxidase (GOD) and obtain GOD@COF. The hierarchical porosity and porous structures of COFs provided sufficient sites to immobilize GOD and increased the rate of diffusion of substrate and product. Moreover, N,Fe-doped carbon dots (N,Fe-CDs) with peroxidase-like activity were introduced to combine with GOD@COF to construct an enzyme-mediated cascade reaction, which is the basis of the sensor GOD@COF/N,Fe-CDs. The sensor has been successfully built and applied to detect glucose. The limit of detection was 0.59 μM for determining glucose with the proposed fluorescence sensor. The practicability was illustrated by detecting glucose in human serum and saliva samples with satisfactory recoveries. The proposed sensor provided a novel strategy that introduced COF-immobilized enzymes for cascade reactions in biosensing and clinical diagnosis.

Synthesis of two tetra-azolium salts and the recognition performance for guests

Two tetra-azolium salts 1 and 2 were synthesized and characterized, and their selective recognition of guests (o-phenylenediamine and F−) was investigated.