Recent advances in nanomaterials-based optical and electrochemical aptasensors for detection of cyanotoxins

A sandwich-type photoelectrochemical biosensor based on Ru(bpy)32+ sensitized In2S3 for aflatoxin B1 detection

Aflatoxin B1 (AFB1), classified as a class I carcinogen, is a widespread mycotoxin that poses a serious threat to public health and economic development, and the food safety problems caused by AFB1 have aroused worldwide concern. The development of accurate and sensitive methods for the detection of AFB1 is significant for food safety monitoring. In this work, a sandwich-type photoelectrochemical (PEC) biosensor for AFB1 detection was constructed on the basis of an aptamer-antibody structure. A good photocurrent response was obtained due to the sensitization of In2S3 by Ru(bpy)32+. In addition, this sandwich-type sensor constructed by modification with the antibody, target detector, and aptamer layer by layer attenuated the migration hindering effect of photogenerated carriers caused by the double antibody structure. The aptamer and antibody synergistically recognized and captured the target analyte, resulting in more reliable PEC response signals. CdSe@CdS QDs-Apt were modified as a signal-off probe onto the sensor platform to quantitatively detect AFB1 with a "signal-off" response, which enhanced the sensitivity of the sensor. The PEC biosensor showed a linear response range from 10-12 to 10-6 g mL-1 with a detection limit of 0.023 pg mL-1, providing a feasible approach for the quantitative detection of AFB1 in food samples.

CeO2 nanocages with tetra-enzyme mimetic activities for dual-channel ratiometric colorimetric detection of microcystins-LR

BACKGROUND

Microcystin-leucine-arginine (MC-LR) produced by various cyanobacteria during harmful algal bloom poses serious threats to drinking water safety and human health. Conventional chromatography-based detection methods require expensive instruments and complicated sample pretreatment, limiting their application for on-site detection. Colorimetric aptasensors are simple and rapid, and are amenable to fast detection. However, they provide only one output signal, resulting in poor sensitivity and accuracy. Dual-channel ratiometric colorimetric method based on the peroxidase-like activity of nanozyme can achieve self-calibration by recording two reverse signals, providing significantly enhanced sensitivity and accuracy.

RESULTS

CeO2 nanocages (CeO2 NCs) with tetra-enzyme mimetic activities (oxidase-, peroxidase-, catalase- and superoxide dismutase-like activities) were facilely synthesized using zeolitic imidazolate framework-67 (ZIF-67) as sacrificial template. The peroxidase-like activity of CeO2 NCs can be regulated by DNA, and it showed opposite response to two chromogenic substrates (2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) and 3,3',5,5'-tetramethylbenzidine (TMB)), which was mainly attributed to the changed affinity. On the basis of MC-LR aptamer-tunable peroxidase-like activity of CeO2 NCs in TMB and ABTS channel, a dual-channel ratiometric colorimetric aptasensor was constructed for detection of MC-LR. Compared with conventional single-signal colorimetric assays, the proposed method showed lower limit of detection (0.66 pg mL-1) and significantly enhanced sensitivity. Moreover, the practicability of the ratiometric colorimetric assay was demonstrated by detecting MC-LR in real water samples, and satisfactory recoveries (94.9-101.9 %) and low relative standard deviations (1.6-6.3 %) were obtained.

SIGNIFICANCE

This work presents a nanozyme-based ratiometric colorimetric aptasensor for MC-LR detection by recording the reverse responses of two chromogenic reactions. Benefiting from the self-calibration function, the method can achieve higher sensitivity and accuracy. The short detection time and practical application in real water samples show great potential for environmental monitoring.

Recent advances in photoelectrochemical platforms based on porous materials for environmental pollutant detection

Human health and ecology are seriously threatened by harmful environmental contaminants. It is essential to develop efficient and simple methods for their detection. Environmental pollutants can be detected using photoelectrochemical (PEC) detection technologies. The key ingredient in the PEC sensing system is the photoactive material. Due to the unique characteristics, such as a large surface area, enhanced exposure of active sites, and effective mass capture and diffusion, porous materials have been regarded as ideal sensing materials for the construction of PEC sensors. Extensive efforts have been devoted to the development and modification of PEC sensors based on porous materials. However, a review of the relationship between detection performance and the structure of porous materials is still lacking. In this work, we present an overview of PEC sensors based on porous materials. A number of typical porous materials are introduced separately, and their applications in PEC detection of different types of environmental pollutants are also discussed. More importantly, special attention has been paid to how the porous material's structure affects aspects like sensitivity, selectivity, and detection limits of the associated PEC sensor. In addition, future research perspectives in the area of PEC sensors based on porous materials are presented.

Lable-free aptamer portable colorimetric smartphone for gliadin detection in food

For individuals with celiac disease (CD), the current clinical therapy option available is a lifelong gluten-free diet. Therefore, it is essential to swiftly and efficiently detect gluten in foods. A colorimetric sensor has been developed, which operates by regulating the aggregation and dispersion state of AuNPs induced by high concentration NaCl through the specific binding of gliadin and aptamer, thereby achieving rapid detection of gliadin in flour. It is found that the sensor exhibits good linearity in the concentration range of 0.67-10 μM and the LOD (3σ/S) is 12 nM. And it can accurately distinguish various types of free-gliadin samples, with a spiked recovery rate of 85%-122.3%. To make the detection process more convenient, the colorimetric results of the biosensor were translated into RGB color-gamut parameters by a smartphone color-picking program for further analysis. Gliadin can still be accurately quantified with the established smartphone platform, and a correlation coefficient of 0.988 was found. The proposed portable smartphone aptamer colorimetric sensing device has achieved satisfactory results in the rapid detection of gliadin in food.

Cyanotoxins availability and detection methods in wastewater treatment plants: A review

Research interest in ecological significance, toxicity, and potential applications of cyanobacterial metabolites has grown as a result of the current extensive cyanobacterial blooms in water bodies. Under favourable conditions, specific cyanobacterial species release cyanotoxins, hepatotoxins, dermatoxins, neurotoxins, and cytotoxins, creating a heightened threat to aquatic ecosystems and human health. Wastewater treatment plants (WWTPs) offer one of the best culture media for cyanobacterial development and synthesis of cyanotoxins by providing optimum environmental conditions, including temperature, light intensity, lengthy water residence time, and nutrient-rich habitat. To discover the intricate relationships between cyanobacterial populations and other living organisms, it is important to comprehend the cyanobacterial communities in the ecology of WWTPs. Monitoring strategies of these cyanotoxins typically involved combined assessments of biological, biochemical, and physicochemical methodologies. Microscopic observations and physicochemical factors analysis cannot be carried out for toxicity potential analysis of blooms. Due to their high sensitivity, molecular-based approaches allow for the early detection of toxic cyanobacteria, while biological analysis is carried out by using water bloom material and cell extracts to screen cyanotoxins build up in organisms. As each approach has benefits and drawbacks, the development of an integrated multi-method laboratory system is essential to obtain trustworthy results and accurate detection of cyanotoxin levels in WWTPs allowing us to take necessary proactive and preventative approaches for effective wastewater treatment.

Toward the Ultimate Limit of Analyte Detection, in Graphene-Based Field-Effect Transistors

The ultimate sensitivity of field-effect-transistor (FET)-based devices for ionic species detection is of great interest, given that such devices are capable of monitoring single-electron-level modulations. It is shown here, from both theoretical and experimental perspectives, that for such ultimate limits to be approached the thermodynamic as well as kinetic characteristics of the (FET surface)-(linker)-(ion-receptor) ensemble must be considered. The sensitivity was probed in terms of optimal packing of the ensemble, through a minimal charge state/capacitance point of view and atomic force microscopy. Through the fine-tuning of the linker and receptor interaction with the sensing surface, a record limit of detection as well as specificity in the femtomolar range, orders of magnitude better than previously obtained and in excellent accord with prediction, was observed.

Magnetic separation-assisted cluster-amplified versatile fluorescent aptasensors for the sensitive detection of target biomolecules

A sensitive and versatile platform for detecting diverse target biomolecules was developed by combining a magnetic separation module and a fluorescence amplification module in a plug-and-play manner. The magnetic separation module was constructed using magnetic beads (MBs), whose surfaces were modified with aptamer-blocked captor DNAs. The fluorescence amplification module was constructed by loading the fluorescent dye rhodamine 6G (Rh6G) into the pores of mesoporous silica nanoparticles (MSNs). The MSN surfaces were modified with prey DNAs, of which the MSN-near ends hybridized with complementary DNAs (sealing DNAs) to form duplexes to seal the pores, and the free ends were designed to be single-stranded that were complementary to the captor DNAs. Upon binding of targets to their aptamers, the captor DNAs were unblocked and thus were able to hybridize with the prey DNAs, to capture Rh6G-laden MSNs, forming MB-MSN clusters. The clusters were isolated by magnetic separation and heated to dissociate the DNA duplexes, to unseal the MSN pores and release the inner Rh6G; thus a target was converted into a cluster of Rh6G dyes. By simply changing the target aptamers and related DNA connectors, this strategy detected ATP, thrombin, and platelet-derived growth factor BB with detection limits of 2.1 nM, 4.1 pM, and 2.4 pM, respectively. A wide range of targets, high amplification efficiency and universal functional modules endow the aptasensors with good potential as versatile platforms for detecting target molecules in vitro and in medical research.

Harmful and beneficial properties of cyanotoxins: Two sides of the same coin

Cyanotoxins are by definition "harmful agents" produced by cyanobacteria. Their toxicity has been extensively studied and reviewed over the years. Cyanotoxins have been commonly classified, based on their poisonous effects on mammals, into three main classes, neurotoxins, hepatotoxins and dermatotoxins, and, considering their chemical features, mainly identified as peptides, alkaloids and lipopolysaccharides. Here we propose a broader subdivision of cyanotoxins into eight distinct classes, taking into account their molecular structures, biosynthesis and modes of action: alkaloids, non-ribosomal peptides, polyketides, non-protein amino acids, indole alkaloids, organophosphates, lipopeptides and lipoglycans. For each class, the structures and primary mechanisms of toxicity of the main representative cyanotoxins are reported. Despite their powerful biological activities, only recently scientists have considered the biotechnological potential of cyanotoxins, and their applications both in medical and in industrial settings, even if only a few of these have reached the biotech market. In this perspective, we discuss the potential uses of cyanotoxins as anticancer, antimicrobial, and biocidal agents, as common applications for cytotoxic compounds. Furthermore, taking into account their mechanisms of action, we describe peculiar potential bioactivities for several cyanotoxin classes, such as local anaesthetics, antithrombotics, neuroplasticity promoters, immunomodulating and antifouling agents. In this review, we aim to stimulate research on the potential beneficial roles of cyanotoxins, which require interdisciplinary cooperation to facilitate the discovery of innovative biotechnologies.

An electrochemical impedimetric platform formed by a CNT@UiO-66 nanocomposite for quantitative analysis of oxytetracycline

Functional materials are considered one of the most critical factors in constructing high-performance electrochemical aptasensors in the sensing field. In this work, the microporous Zr-MOF UiO-66 (UiO = Universitetet i Oslo) is selected for assembly with carbon nanotubes (CNTs) to prepare a CNT@UiO-66 composite. The as-synthesized CNT@UiO-66 composite has a high surface area, excellent stability, good electrical conductivity, and abundant Zr(IV) sites, conferring it great potential for application in fabricating high-performance electrochemical aptasensors. It is gratifying that this electrochemical impedimetric aptasensor can detect trace oxytetracycline (OTC) from 0.01 to 0.7 pg mL-1 with a low limit of detection (LOD) of 1.48 fg mL-1. Meanwhile, this fabricated sensor based on CNT@UiO-66 has fine stability, excellent selectivity, and available reproducibility. In particular, the CNT@UiO-66-based aptasensor can quantitatively detect the OTC concentration in real samples.

Electrochemical Detection of Flutamide by the Composite of Complex Based on Thiacalix[4]arene Derivatives and Reduced Graphene Oxide

In this paper, a thiacalix[4]arene complex [Zn2(TIT4A)L2]·4DMF·2CH3OH (H2L = 4,4'-oxybisbenzoic acid) (Zn-TIT4A-L) was synthesized by a solvothermal method. The composites were prepared by combining Zn-TIT4A-L with reduced graphene oxide (RGO), mesoporous carbon (MC), and multi-walled carbon nanotubes (MWCNTs), respectively. Three representative composites are Zn-TIT4A-L@RGO(1:1), Zn-TIT4A-L@MC(1:2), and Zn-TIT4A-L@MWCNT(1:2). X-ray diffraction and scanning electron microscopy characterized their structures and morphologies. The results showed that three composites were successfully prepared, and the crystals of the complex remained in the composites. The electrochemical properties of the composites were characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The results indicated that they had good electrocatalytic activity and conductivity. Among them, Zn-TIT4A-L@RGO(1:1) had the best performance and was used for the quantitative detection of flutamide (FTA). The linear range of detection is 0.1-200 μM, and the limit of detection is 0.015 μM. At the same time, the sensor also had good reproducibility, anti-interference, and stability. The sensor was also used for the detection of FTA in lake water, human urine, and serum with a satisfactory recovery rate. The possible mechanism of electrochemical detection of FTA was also discussed.

PEG-functionalized black phosphorus quantum dots as stable and biocompatible electrochemiluminescence luminophores for sensitive detection of tumor biomarker

Despite black phosphorous (BP) QDs possess the merits of size-tunable band-gap, high electron mobility, and intrinsic defects, the spontaneous agglomeration and rapid oxidation of BP QDs in aqueous solution caused low electrochemiluminescence (ECL) efficiency and unstable ECL signal, which confined its further application of biological analysis. Herein, polyethylene glycol-functionalized BP QDs (PEG@BP QDs) were prepared showing an efficient and stable ECL response, which is attributed to the fact that PEG as protectant not only effectively prevented the spontaneous agglomeration, but also restrained the rapid oxidation of BP QDs in aqueous solution. As proof-of-concept, PEG@BP QDs were used as an efficient ECL emitter to combine with palindrome amplification-induced DNA walker to construct a sensitive ECL aptasensing platform for detecting cancer marker mucin 1 (MUC1). Interestingly, with the aid of positively charged thiolated PEG, the reaction rate of DNA walker on the electrode interface was clearly increased for the recovery of the ECL signal. The ECL aptasensor provides sensitive determination with the detection limit of 16.5 fg/mL. The proposed strategy paves a path for the development of efficient and stable ECL nanomaterials to construct biosensors for biosensing and clinical diagnosis.

DNA controllable peroxidase-like activity of Ti3C2 nanosheets for colorimetric detection of microcystin-LR

The peroxidase-like activity of Ti₃C₂ nanosheets (Ti₃C₂ NSs) was evaluated by catalytic oxidation of colorless o-phenylenediamine (OPD) into orange-yellow 2,3-diaminophenazine (DAP) with the aid of H₂O₂. The catalytic behavior followed the typical Michaelis-Menten kinetics. Systematic studies about the catalytic activity of Ti₃C₂ NSs including cytochrome C (Cyt C) electron transfer experiments, radical capture experiments, and fluorescence analysis were conducted, revealing that the catalytic mechanism of Ti₃C₂ NSs was attributed to nanozyme-accelerated electron transfer between substrates and nanozyme-promoted generation of active species (superoxide anion free radical (·O₂^-) and holes (h⁺)). Single-stranded DNA (ssDNA) inhibited the peroxidase-like activity of Ti₃C₂ NSs, and the reduced catalytic activity was ascribed to DNA-hindered substrate accessibility to nanozyme surface. Based on the DNA controllable peroxidase-mimicking activity of Ti₃C₂ NSs, taking microcystin-LR (MC-LR) aptamer as an example, a label-free colorimetric aptasensor was proposed for the sensitive detection of MC-LR. The colorimetric aptasensor showed a wide linear range (0.01-60 ng mL^-1), low limit of detection (6.5 pg mL^-1), and high selectivity. The practicality of the colorimetric aptasensor was demonstrated by detecting different levels of MC-LR in spiked real water samples; satisfactory recoveries (97.2-102.1%) and low relative standard deviations (1.16-3.72%) were obtained.

In-Situ Fabrication of Electroactive Cu2+-Trithiocyanate Complex and Its Application for Label-Free Electrochemical Aptasensing of Thrombin

The preparation of an electroactive matrix for the immobilization of the bioprobe shows great promise to construct the label-free biosensors. Herein, the electroactive metal-organic coordination polymer has been in-situ prepared by pre-assembly of a layer of trithiocynate (TCY) on a gold electrode (AuE) through Au-S bond, followed by repetitive soaking in Cu(NO₃)₂ solution and TCY solutions. Then the gold nanoparticles (AuNPs) and the thiolated thrombin aptamers were successively assembled on the electrode surface, and thus the electrochemical electroactive aptasensing layer for thrombin was achieved. The preparation process of the biosensor was characterized by an atomic force microscope (AFM), attenuated total reflection-Fourier transform infrared (ATR-FTIR), and electrochemical methods. Electrochemical sensing assays showed that the formation of the aptamer-thrombin complex changed the microenvironment and the electro-conductivity of the electrode interface, causing the electrochemical signal suppression of the TCY-Cu²⁺ polymer. Additionally, the target thrombin can be label-free analyzed. Under optimal conditions, the aptasensor can detect thrombin in the concentration range from 1.0 fM to 1.0 μM, with a detection limit of 0.26 fM. The spiked recovery assay showed that the recovery of the thrombin in human serum samples was 97.2-103%, showing that the biosensor is feasible for biomolecule analysis in a complex sample.

Recent Advances in Electrochemical Aptasensors for Detection of Biomarkers

The early diagnosis of diseases is of great importance for the effective treatment of patients. Biomarkers are one of the most promising medical approaches in the diagnosis of diseases and their progress and facilitate reaching this goal. Among the many methods developed in the detection of biomarkers, aptamer-based biosensors (aptasensors) have shown great promise. Aptamers are promising diagnostic molecules with high sensitivity and selectivity, low-cost synthesis, easy modification, low toxicity, and high stability. Electrochemical aptasensors with high sensitivity and accuracy have attracted considerable attention in the field of biomarker detection. In this review, we will summarize recent advances in biomarker detection using electrochemical aptasensors. The principles of detection, sensitivity, selectivity, and other important factors in aptasensor performance are investigated. Finally, advantages and challenges of the developed aptasensors are discussed.