Pd/C–Et3N-mediated catalytic hydrodechlorination of aromatic chlorides under mild conditions

Enantioselective Total Syntheses of Preussomerins: Control of Spiroacetal Stereogenicity by Photochemical Reaction of a Naphthoquinone through 1,6-Hydrogen Atom Transfer

We report the enantioselective total syntheses of preussomerins EG₁ , EG₂ , and EG₃ . The key transformation is a stereospecific photochemical reaction involving 1,6-hydrogen atom transfer to achieve retentive replacement of a C-H with a C-O bond, enabling otherwise-difficult control of the spiroacetal stereogenic center.

Application of Raney Al-Ni Alloy for Simple Hydrodehalogenation of Diclofenac and Other Halogenated Biocidal Contaminants in Alkaline Aqueous Solution under Ambient Conditions

Raney Al-Ni contains 62% of Ni₂Al₃ and 38% NiAl₃ crystalline phases. Its applicability has been studied within an effective hydrodehalogenation of hardly biodegradable anti-inflammatory drug diclofenac in model aqueous concentrates and, subsequently, even in real hospital wastewater with the aim of transforming them into easily biodegradable products. In model aqueous solution, complete hydrodechlorination of 2 mM aqueous diclofenac solution (0.59 g L⁻¹) yielding the 2-anilinophenylacetate was achieved in less than 50 min at room temperature and ambient pressure using only 9.7 g L⁻¹ of KOH and 1.65 g L⁻¹ of Raney Al-Ni alloy. The dissolving of Al during the hydrodehalogenation process is accompanied by complete consumption of NiAl₃ crystalline phase and partial depletion of Ni₂Al₃. A comparison of the hydrodehalogenation ability of a mixture of diclofenac and other widely used halogenated aromatic or heterocyclic biocides in model aqueous solution using Al-Ni was performed to verify the high hydrodehalogenation activity for each of the used halogenated contaminants. Remarkably, the robustness of Al-Ni-based hydrodehalogenation was demonstrated even for the removal of non-biodegradable diclofenac in real hospital wastewater with high chloride and nitrate content. After removal of the insoluble part of the Al-Ni for subsequent hydrometallurgical recycling, the low quantity of residual Ni was removed together with insoluble Al(OH)₃ obtained after neutralization of aqueous filtrate by filtration.

Experimental Identification of the Roles of Fe, Ni and Attapulgite in Nitroreduction and Dechlorination of p-Chloronitrobenzene by Attapulgite-Supported Fe/Ni Nanoparticles

The porous-material loading and noble-metal doping of nanoscale zero-valent iron (nFe) have been widely used as countermeasures to overcome its limitations. However, few studies focused on the experimental identification of the roles of Fe, the carrier and the doped metal in the application of nFe. In this study, the nitroreduction and dechlorination of p-chloronitrobenzene (p-CNB) by attapulgite-supported Fe/Ni nanoparticles (ATP-nFe/Ni) were investigated and the roles of Fe, Ni and attapulgite were examined. The contributions of Ni are alleviating the oxidization of Fe, acting as a catalyst to trigger the conversion of H₂ to H*(active hydrogen atom) and promoting electron transfer of Fe. The action mechanisms of Fe in reduction of -NO₂ to -NH₂ were confirmed to be electron transfer and to produce H₂ via corrosion. When H₂ is catalyzed to H* by Ni, the production H* leads to the nitroreduction. In additon, H* is also responsible for the dechlorination of p-CNB and its nitro-reduced product, p-chloroaniline. Another corrosion product of Fe, Fe²⁺, is incapable of acting in the nitroreduction and dechlorination of p-CNB. The roles of attapulgite includes providing an anoxic environment for nFe, decreasing nFe agglomeration and increasing reaction sites. The results indicate that the roles of Fe, Ni and attapulgite in nitroreduction and dechlorination of p-CNB by ATP-nFe/Ni are crucial to the application of iron-based technology.

A catalyzed method to remove polychlorinated biphenyls from contaminated transformer oil

The disposal of polychlorinated biphenyls (PCBs) as persistent organic pollutants from the environment has been normally performed by isolation from soil or water because of their biological activity and toxic potential. In the present investigation, catalytic hydrodehalogenation was used to detoxify PCBs-contaminated transformer oil. All reactions were directed on an oil containing 11.09 wt% of PCBs utilizing palladium supported on multi-walled carbon nanotubes (Pd/MWCNTs). The amount of hexa-chlorine homologues reduced considerably from 5.07% to less than 800 ppm utilizing HDC at the atmosphere of argon. Moreover, the amounts of long half-lives and bioaccumulative congener of PCB 153 decreased considerably from 3.2% to less than 200 ppm. Besides, the quantity of some environmental pollutants like PCB 105 as a mono-ortho-substituted congener decreased considerably. The significant effects of reaction time, reaction temperature, and catalyst concentration on the efficiency were confirmed and modeled through Box-Behnken design. The optimal reaction condition with an efficiency of 96.67% was 70°C, with catalyst loading of 8 wt% and reaction time of 3.23 h. Furthermore, the quantity of turnover frequency of Pd/MWCNTs showed that it has more activity than palladium-carbon active supported in the ambient pressure without utilizing hydrogen gas in transformer oil complex. The study of the kinetic model revealed that the required activation energy (of 12.99 kJ/mol) to remove PCBs from transformer oil utilizing the present catalyst was lower than other catalyzed hydrodechlorination methods.

Facile and practical hydrodehalogenations of organic halides enabled by calcium hydride and palladium chloride

For the first time, calcium hydride and palladium chloride were used to reduce a wide range of organic halides including aromatic bromides, aromatic chlorides, aromatic triflates, aliphatic bromides, aliphatic chlorides and trihalomethyl compounds.

Screening of zero valent mono/bimetallic catalysts and recommendation of Raney Ni (without reducing agent) for dechlorination of 4-chlorophenol

Chlorophenol (CP) is considered as environmentally hazardous material due to its acute toxicity, persistent nature and strong bioaccumulation. The dechlorination of 4-CP was investigated by using various catalysts such as bimetallic (Fe⁰/Cu⁰, Al⁰/Fe⁰), Pd/C, Raney Ni and Fe⁰ at room temperature. Among the catalysts studied, Raney Ni proved to be very economical and efficient catalyst that worked without the use of an external reducing agent. The dechlorination of 4-CP by Raney Ni was therefore further explored. Complete dechlorination of 4-CP (30 mg L^-1) was achieved in 6 h at an optimum Raney Ni catalyst loading of 3 g L^-1. The effect of triethylamine (TEA) and tripropylamine (TPA) was also investigated and it was observed that 100% dechlorination is possible in presence of 45 mg L^-1 of TEA. The kinetics of dechlorination of 4-CP was investigated and found to be first order with a rate constant of 0.017 min^-1 at 50 ^οC, and it enhances to 0.109 min^-1 with addition of TEA. In the absence of a reducing agent, acidic to neutral pH favors dechlorination of 4-CP. The final product of dechlorination was estimated to be phenol by performing HPLC, LCMS and NMR analysis. Based on the results, a probable dechlorination mechanism of 4-CP is also proposed. It can be concluded that the catalytic hydrodechlorination is an effective and economical technique for dechlorination of 4-CP and it has a potential for the dechlorination of other toxic derivatives of chlorinated aromatics.

Facile Hydrogenative Deprotection of N-Benzyl Groups Using a Mixed Catalyst of Palladium and Niobic Acid-on-Carbon

The palladium-on-carbon (Pd/C)-catalyzed hydrogenative deprotection of the N-benzyl-protecting group was effectively facilitated by the combined use of niobic acid-on-carbon (Nb₂O₅/C). Nb₂O₅/C is an acidic heterogeneous catalyst prepared from NbCl₅ and activated carbon. The catalysts were easily removed from the reaction mixture and reusable. Deprotected amines were obtained in excellent yields without an additional neutralization process. The facilitating effect of Nb₂O₅/C was also observed during the Pd/C-catalyzed hydrogenative deprotection of the N-benzyloxycarbonyl (Cbz) and O-benzyl groups.

Pd catalysts supported on dual-pore monolithic silica beads for chemoselective hydrogenation under batch and flow reaction conditions

Two different types of palladium catalysts supported on dual-pore monolithic silica beads [5% Pd/SM and 0.25% Pd/SM(sc)] for chemoselective hydrogenation were developed.

A simple and effective approach for catalytic reductive dechlorination of aromatic compounds

An efficient process for the preparation of 2(3),9(10),16(17),23(24)-octa(n-hexyl)cobalt(II)phthalocyanine, ((n-hexyl)8CoPc) (2) was described. The novel cobalt(II)phthalocyanine was characterized by spectroscopic methods. It was employed as a catalyst for the room temperature reductive dechlorination of chlorinated aromatic compounds (CACs). The results were showed that the CACs were completely dechlorinated within 110–120 min.

Nickel-catalyzed C–N bond reduction of aromatic and benzylic quaternary ammonium triflates

A nickel-catalyzed, efficient C–N bond reduction of aromatic and benzylic ammonium triflates has been developed using sodium isopropoxide as a reducing agent.

Practical remediation of the PCB-contaminated soils

A practical method for the elimination of PCBs from PCB-contaminated soil has been developed by the combination of Soxhlet extraction using a newly-developed modified Soxhlet extractor possessing an outlet valve on the extraction chamber with the chemical degradation. Various types of PCBs contaminated in soils could be completely extracted in refluxing hexane, and the subsequent hydrodechlorination could also be completed within 1 h in a hexane-MeOH (1 : 5) solution in the presence of Pd/C and Et3N under ordinary hydrogen pressure and temperature without the transfer of the extracted PCBs to other reaction container (a complete one-pot procedure). The present system is quite useful as a simple, safe, mild and reliable remediation method of PCB-contaminated soil.

Synthesis and in vitro evaluation of novel 8-aminoquinoline-pyrazolopyrimidine hybrids as potent antimalarial agents

In the search of novel chemotherapeutic agents for emerging drug resistant parasites, the hybridization approaches have successfully emerged as an efficient tool in malarial chemotherapy. Herein, a rational design and synthesis of novel 8-aminoquinoline and pyrazolopyrimidine hybrids and their antimalarial activity against wild type Plasmodium falciparum (Pf_NF54) and resistant strain (Pf_K1) is reported. The medicinal chemistry approach to expand the scope of this series resulted in an identification of potent compounds with nanomolar potency (best IC50 5-10nM). Systematic structure activity relationship (SAR) studies revealed that pyrazolopyrimidine and 8-aminoquinoline ring are essential for achieving good P. falciparum potency. The docking study revealed that the compound 6 can retain some of the critical interactions within pfDHODH drug target.

Digitally enhanced thin layer chromatography: further development and some applications in isotopic chemistry

Improvements to thin layer chromatography (TLC) analysis can be made easily and cheaply by the application of digital colour photography and image analysis. The combined technique, digitally enhanced TLC (DE-TLC), is applicable to the accurate quantification of analytes in mixtures, to reaction monitoring and to other typical uses of TLC. Examples are given of the application of digitally enhanced TLC to: the deuteromethylations of theophylline to [methyl-(2)H3]caffeine and of umbelliferone to [(2)H3]7-methoxycoumarin; the selection of tertiary amine bases in deuterodechlorination reactions; stoichiometry optimisation in the borodeuteride reduction of quinizarin (1,4-dihydroxyanthraquinone) and to the assessment of xanthophyll yields in Lepidium sativum seedlings grown in deuterated media.

Practical method for PCB degradation using Pd/C-H2-Mg system

Polychlorinated biphenyls (PCBs) were mainly used as lubricants and coolants in electrical equipment. However, their chemical stabilities as well as hydrophobic properties caused persistent environmental pollution and damage to human health based on their bioaccumulative property. PCBs are currently targeted for worldwide elimination and should be disposed by 2028 based on the Stockholm Convention on Persistent Organic Pollutants. The conventional PCB degradation methods require high-heat, high-pressure or/and strongly basic conditions. The development of a safer and more practical method, therefore, is desired. We have reported a catalytic degradation method of PCBs based on a palladium on carbon (Pd/C)-catalyzed dechlorination in the presence of Et(3)N under ambient hydrogen pressure and temperature. In this study, we demonstrate a more practical system using magnesium metal instead of Et(3)N for the dechlorination of a variety of aromatic chlorides. The method was applicable for the complete degradation of a variety of PCB mixtures, such as Aroclor 1242, 1248, 1254 and PCBs removed from a capacitor to produce only biphenyl and magnesium chloride as the maritime component, both of which are less toxic and easily separable. Moreover, the Pd/C could be recovered and reused at least five times without any loss of catalytic activity. The present Pd/C-Mg-H(2) system is a simple, safe, inexpensive, and environmentally-benign degradation method of PCBs.

Highly ordered mesoporous TiO2-Fe2O3 mixed oxide synthesized by sol-gel pathway: an efficient and reusable heterogeneous catalyst for dehalogenation reaction

Highly ordered two-dimensional (2D) hexagonal TiO(2)-Fe(2)O(3) mixed-oxide material MFT-1, which is composed of very tiny nanoparticles, is synthesized using sodium dodecylsulfate (SDS) as a structure-directing agent. Interestingly, synthesis of an ordered mesophase was not possible using SDS as a template for mesoporous pure Fe(2)O(3) or TiO(2) phases. This mesoporous iron-titanium mixed-oxide material has been characterized by powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), N(2) sorption, ultraviolet-visible light diffuse reflectance spectroscopy (UV-vis DRS) studies. N(2) sorption analysis revealed high surface areas (126-385 m(2) g(-1)) and narrow pore size distributions (3.1-3.4 nm) for different samples. UV-vis DRS spectra and wide-angle powder XRD patterns indicate that the material is composed of α-Fe(2)O(3) and anatase TiO(2) phases. This TiO(2)-Fe(2)O(3) mixed-oxide material can act as a very efficient and reusable catalyst in the dehalogenation of aromatic chloride-, bromide-, and iodide-tolerating -F, -CN, -CH(3), -OCH(3) and -NO(2) functional groups in the aromatic ring using 2-propanol as the dispersion medium.

Pd/C-catalyzed dechlorination of polychlorinated biphenyls under hydrogen gas-free conditions

The simultaneous use of catalytic amount of palladium on carbon (Pd/C) and Mg metal (1.5-2.0 equiv vs. Cl numbers of the substrates) in MeOH achieved the complete dechlorination of a variety of aryl chlorides at room temperature under a nitrogen atmosphere in the absence of hydrogen gas. The present method could be successfully used for the detoxification of PCBs based on the dechlorination reaction. Both virgin PCBs, such as Aroclors 1242, 1248 and 1254, and used PCBs as a high-tension capacitor oil, were smoothly dechlorinated into harmless biphenyl without any byproducts within 2h at rt. The distinctive features of this method are convenience and safety due to no needs for the pretreatment of catalyst and Mg and complete degradation of PCBs under mild conditions without hydrogen gas.

Reductive dechlorination for remediation of polychlorinated biphenyls

Technologies such as thermal, oxidative, reductive, and microbial methods for the remediation of polychlorinated biphenyls (PCBs) have previously been reviewed. Based on energy consumption, formation of PCDD/F, and remediation efficiency, reductive methods have emerged as being advantageous for remediation of PCBs. However, many new developments in this field have not been systematically reviewed. Therefore, reductive technologies published in the last decade related to remediation of PCBs will be reviewed here. Three categories, including catalytic hydrodechlorination with H(2), Fe-based reductive dechlorination, and other reductive dechlorination methods (e.g., hydrogen-transfer dechlorination, base-catalyzed dechlorination, and sodium dispersion) are specifically reviewed. In addition, the advantages of each remediation technology are discussed. In this review, 108 articles are referenced.

Liquid phase hydrodechlorination of chlorophenols at lower temperature on a novel Pd catalyst

Pd catalyst supported on mesoporous silica-carbon nano-composite (Pd/MSCN) was prepared by the method of wet impregnation, and its activity for hydrodechlorination (HDC) of 2-chlorophenol, 4-chlorophenol and 2,4-dichlorophenol was evaluated at 258-313 K under ordinary hydrogen pressure by using triethylamine (Et(3)N) as a base additive. XRD analysis indicates that Pd/MSCN catalyst possesses the ordered mesostructure. Meanwhile, the results from TEM and H(2) chemisorption analysis indicate the high dispersion of Pd on MSCN with Pd nanoparticles whose average size is 3.2 nm. For the first time, the high activity of nano-size Pd on MSCN for HDC of chlorophenols was observed at 258 K. In addition, it was found that the inhibition effect of Et(3)N on HDC existed obviously, and can be efficiently reduced by stepwise addition of Et(3)N. The correlations of the dielectric constants of base and the polarity of solvent to the activity of Pd/MSCN for HDC of chlorophenols were obtained.

Modulating reactivity and diverting selectivity in palladium-catalyzed heteroaromatic direct arylation through the use of a chloride activating/blocking group

Through the introduction of an aryl chloride substituent, the selectivity of palladium-catalyzed direct arylation may be diverted to provide alternative regioisomeric products in high yields. In cases where low reactivity is typically observed, the presence of the carbon-chlorine bond can serve to enhance reactivity and provide superior outcomes. From a strategic perspective, the C-Cl bond is easily introduced and can be employed in a variety of subsequent transformations to provide a wealth of highly functionalized heterocycles with minimal substrate preactivation. The impact of the C-Cl functional group on direct arylation reactivity has also been evaluated mechanistically, and the observed reactivity profiles correlate very well with that predicted by a concerted metalation-deprotonation pathway.