Catalyst-free alcoholysis of phosphane-boranes: a smooth, cheap, and efficient deprotection procedure

Mono- and Bis-Phosphine Promoted Incorporation of Boron, Nitrogen, and Phosphorus into Heterocycles via Staudinger Reactions of Borafluorene Azides

We report the synthesis and characterization of a series of BNP-incorporated borafluorenate heterocycles formed via thermolysis reactions of pyridylphosphine and bis(phosphine)-coordinated borafluorene azides. The use of diphenyl-2-pyridylphosphine (PyPh2P), trans-1,2-bis(diphenylphosphino)ethylene (Ph2P(H)C═C(H)PPh2), and bis(diphenylphosphino)methane (Ph2PC(H2)PPh2) as stabilizing ligands resulted in Staudinger reactions to form complex heterocycles with four- (BN2P, BNPC, P2N2) and five-membered (BNP2C and BN2PC) rings, which were successfully isolated and fully characterized by multinuclear NMR and X-ray crystallography. However, when bis(diphenylphosphino)benzene (Ph2P-Ph-PPh2) was used as the ligand in a reaction with 9-bromo-9-borafluorene (BF-Br), due to the close proximity of the donor P atoms, the diphosphine-stabilized borafluoronium ion with an unusual borafluorene dibromide anion was formed. Reaction of the borafluoronium ion with trimethylsilyl azide left the cation intact, and the dibromide anion was substituted by a diazide. Density functional theory calculations were used to provide mechanistic insight into the formation of these new boracyclic compounds. This work highlights a new method in which donor phosphine ligands may be used to promote dimerization, cyclization, and ring contraction reactions to produce boracycles via Staudinger reactions.

Optically Pure Calixarenyl Phosphine via Stereospecific Alkylation on Evans' Oxazolidinone Moiety

A convenient protocol for the synthesis of 25,26,27-tribenzoyl-28-[((S)-1-diphenylphos- phanyl-propan-2-yl)oxy]-calix[4]arene via stereospecific methylation on Evans' oxazolidinone moiety was reported. According to the 13C NMR analysis of this phosphine, the calix[4]arene skeleton adopted a 1,3-alternate conformation. The latter conformation of the macrocycle and the (S)-chirality of the carbon atom bearing the methyl substituent were confirmed by a single-crystal X-ray diffraction study. After coordination of the phosphinated ligand to the dimeric [RuCl2(p-cymene)]2 organometallic precursor, the resulting arene-ruthenium complex was tested in the asymmetric reduction of acetophenone and alcohol was obtained with modest enantiomeric excess.

A Triphenylphosphine-Based Microporous Polymer for a Wittig Reaction Cycle in the Solid State

The Wittig reaction is a key step in industrial processes to synthesise large quantities of vitamin A and various other important chemicals that are used in daily life. This article presents a pathway to achieve the Wittig reaction in a solid network. A highly porous triphenylphosphine-based polymer was applied as a solid Wittig reagent that undergoes, in a multi-step cycle, in total six post-synthetic modifications. This allowed for regeneration of the solid Wittig reagent and reuse for the same reaction cycle. Of particular industrial relevance is that the newly developed material also enables a simple way of separating the product by filtration. Therefore, additional costly and difficult separation and purification steps are no longer needed.

Fast phosphine-activated control of protein function using unnatural lysine analogues

Effective, general methods for conditionally activating proteins in their native biological environments are highly useful for biological studies. Since phosphines and azides are not found in pro- and eukaryotic cells, the Staudinger reduction can function as an excellent small molecule-controlled switch for protein activation. This methodology involves site-specifically incorporating azidobenyl-lysine analogues into proteins in live cells. When placed at a crucial position, these unnatural side chains block protein function until a phosphine trigger is added. We discuss methods for expressing caged proteins in bacterial and mammalian cells in high yields, and activating the proteins with an optimized phosphine trigger. We also discuss important considerations for safe and effective synthesis of these molecules. This methodology was used to translocate proteins to the nucleus and to turn-on a protein post-translational modification (SUMOylation) in living cells.

Synthesis and characterisation of Pd(ii) and Au(i) complexes with mesoionic carbene ligands bearing phosphinoferrocene substituents and isomeric carbene moieites

While numerous functional ligands combining phosphine and imidazole-2-ylidene (or imidazolin-2-ylidene) donor moieties have already been reported, the chemistry of the corresponding functional mesoionic carbenes (MIC) derived from 1,2,3-triazoles remains nearly untapped. This contribution describes the synthesis of two isomeric series of triazolium salts bearing 1'-(diphenylphosphino)ferrocenyl substituents by [3 + 2] cycloaddition of a P-protected phosphinoferrocene alkyne with azides, or alternatively of a P-protected phosphinoferrocene azide with terminal alkynes, and by subsequent methylation. These salts were used to synthesize structurally unique Pd(ii) complexes featuring a P,C-chelating triazolylidene carbene ligands and Au(i)-MIC complexes with free phosphine groups. The latter were further utilised to prepare Pd(ii)Au(i) heterometallic complexes containing bridging ferrocene phosphino-carbenes as structurally flexible, donor-unsymmetric metalloligands. In addition, the reactivity of the newly prepared, P-protected phosphinoferrocene alkyne Ph₂PfcC[triple bond, length as m-dash]CH·BH₃ (fc = ferrocene-1,1'-diyl) was investigated, and representatives from all reported compound classes were structurally characterised.

Synthesis and rhodium complexes of macrocyclic PNP and PONOP pincer ligands

The synthesis of macrocyclic variants of commonly employed phosphine-based pincer ligands derived from lutidine (PNP-14) and 2,6-dihydroxypyridine (PONOP-14) is described, where the P-donors are trans-substituted with a tetradecamethylene linker. This was accomplished using an eight-step procedure involving borane protection, ring-closing olefin metathesis, chromatographic separation from the cis-substituted diastereomers, and borane deprotection. The rhodium coordination chemistry of these ligands has been explored, aided by the facile synthesis of 2,2'-biphenyl (biph) adducts [Rh(PNP-14)(biph)][BAr^F₄] and [Rh(PONOP-14)(biph)][BAr^F₄] (Ar^F = 3,5-(CF₃)₂C₆H₃). Subsequent hydrogenolysis enabled generation of dihydrogen, ethylene and carbonyl derivatives; notably the ν(CO) bands of the carbonyl complexes provide a means to compare the donor properties of the new pincer ligands with established acyclic congeners.

Rational Design and Facile Synthesis of Boranophosphate Ionic Liquids as Hypergolic Rocket Fuels

The design and synthesis of new hypergolic ionic liquids (HILs) as replacements for toxic hydrazine derivatives have been the focus of current academic research in the field of liquid bipropellant fuels. In most cases, however, the requirements of excellent ignition performances, good hydrolytic stabilities, and low synthetic costs are often contradictory, which makes the development of high-performance HILs an enormous challenge. Here, we show how a fuel-rich boranophosphate ion was rationally designed and used to synthesize a series of high-performance HILs with excellent comprehensive properties. In the design strategy, we introduced the {BH₃ } moiety into the boranophosphate ion for improving the self-ignition property, whereas the complexation of boron and phosphite was used to improve the hydrolytic activity of the borohydride species. As a result, these boranophosphate HILs exhibited wide liquid operating ranges (>220 °C), high densities (1.00-1.10 g cm^-3 ), good hydrolytic stabilities, and short ignition delay times (2.3-9.7 milliseconds) with white fuming nitric acid (WFNA) as the oxidizer. More importantly, these boranophosphate HILs could be readily prepared in high yields from commercial phosphite esters, avoiding complex and time-consuming synthetic routes. This work offers an effective strategy of designing boranophosphate HILs towards safer and greener hypergolic fuels for liquid bipropellant applications.

Superphenylphosphines: Nanographene-Based Ligands That Control Coordination Geometry and Drive Supramolecular Assembly

Tertiary phosphines remain widely utilized in synthesis, most notably as supporting ligands in metal complexes. A series of triarylphosphines bearing one to three hexa-peri-hexabenzocoronene (HBC) substituents has been prepared by an efficient divergent route. These "superphenylphosphines", P{HBC(t-Bu)₅}_nPh_3-n (n = 1-3), form the palladium complexes PdCl₂L₂ and Pd₂Cl₄L₂ where the isomer distribution in solution is dependent on the number of HBC substituents. The crystalline structures of five complexes all show intramolecular π-stacking between HBC-phosphines to form a supramolecular bidentate-like ligand that distorts the metal coordination geometry. When n = 2 or 3, the additional HBC substituents engage in intermolecular π-stacking to assemble the complexes into continuous ribbons or sheets. The phosphines adopt HBC's characteristics including strong optical absorption, green emission, and redox activity.

EFFECT OF LEWIS ACID/BASE ADDUCTS AS A SILANIZATION CATALYST IN RUBBER COMPOSITIONS CONTAINING SILICA

Silica-filled rubber compositions with good physical properties after curing, like those containing mercaptosilane, often have problems with processability. So, balancing the curing properties and processability of the compositions to a high level is very important. Controlling the silanization process is considered to be one of the key factors in solving this problem. Therefore, this study has focused on the effective silanization by using Lewis acid/base adduct containing boron atoms as the silanization catalyst. Blending the catalyst, triphenylphosphine–triphenylborane complex (PB-complex) or pyridine–triphenylborane complex (NB-complex) into the rubber compositions has been found to improve the tan δ balance at high and low temperatures without impeding processability. This result indicates that effective silanization using catalysts is important to balance the properties before and after curing; and the PB- and NB-complex can act as an effective silanization catalyst even in the mixing process. The acceleration of silanization by using the catalysts has been confirmed by the results of model reactions between silica and silane coupling agents in the presence or absence of the PB-complex in organic solvent.

Applications and stereoselective syntheses of P-chirogenic phosphorus compounds

This review reports the best stereoselective or asymmetric syntheses, the most efficient P*-building blocks and functionalisation of P-chirogenic compounds, in the light of chiral phosphorus compound applications.

Mechanism of phosphine borane deprotection with amines: the effects of phosphine, solvent and amine on rate and efficiency

The kinetics of borane transfer from simple tertiary phosphine borane adducts to a wide range of amines have been determined. All data obtained, including second-order kinetics, lack of cross-over, and negative entropies of activation for reaction of triphenylphosphine borane with quinuclidine and triethylamine, are consistent with a direct (SN 2-like) transfer process, rather than a dissociative (SN 1-like) process. The identities of the amine, phosphine, and solvent all impact substantially on the rate (k) and equilibrium (K) of the transfer, which in some cases vary by many orders of magnitude. P-to-N transfer is more efficient with cyclic amines in apolar solvents due to reduced entropic costs and ground-state destabilisation. Taken as a whole, the data allow informed optimisation of the deprotection step from the stand-point of rate, or synthetic convenience. In all cases, both reactants should be present at high initial concentration to gain kinetic benefit from the bimolecularity of the process. Ultimately, the choice of amine is dictated by the identity of the phosphine borane complex. Aryl-rich phosphine boranes are sufficiently reactive to allow use of diethylamine or pyrrolidine as a volatile low polarity solvent and reactant, whereas more alkyl-rich phosphines benefit from the use of more reactive amines, such as 1,4-diaza[2.2.2]bicyclooctane (DABCO), in apolar solvents at higher temperatures.

Chemoselective reduction of the phosphoryl bond of O-alkyl phosphinates and related compounds: an apparently impossible transformation

A method is reported for the phosphoryl bond cleavage of O-alkyl phosphinates, phosphinothioates and certain phosphonamidates to furnish the corresponding P(iii) borane adducts.

Titanocene(iii) complexes with 2-phosphinoaryloxide ligands for the catalytic dehydrogenation of dimethylamine borane

A study of the dehydrogenation of dimethylamine borane using different titanocene(iii) complexes with 2-phosphinoaryloxide ligands is presented.

Effect of the phosphine steric and electronic profile on the Rh-promoted dehydrocoupling of phosphine-boranes

The electronic and steric effects in the stoichiometric dehydrocoupling of secondary and primary phosphine–boranes H₃B·PR₂H [R = 3,5-(CF₃)₂C₆H₃; p-(CF₃)C₆H₄; p-(OMe)C₆H₄; adamantyl, Ad] and H₃B·PCyH₂ to form the metal-bound linear diboraphosphines H₃B·PR₂BH₂·PR₂H and H₃B·PRHBH₂·PRH₂, respectively, are reported. Reaction of [Rh(L)(η⁶-FC₆H₅)][BAr^F₄] [L = Ph₂P(CH₂)₃PPh₂, Ar^F = 3,5-(CF₃)₂C₆H₃] with 2 equiv of H₃B·PR₂H affords [Rh(L)(H)(σ,η-PR₂BH₃)(η¹-H₃B·PR₂H)][BAr^F₄]. These complexes undergo dehydrocoupling to give the diboraphosphine complexes [Rh(L)(H)(σ,η²-PR₂·BH₂PR₂·BH₃)][BAr^F₄]. With electron-withdrawing groups on the phosphine–borane there is the parallel formation of the products of B–P cleavage, [Rh(L)(PR₂H)₂][BAr^F₄], while with electron-donating groups no parallel product is formed. For the bulky, electron rich, H₃B·P(Ad)₂H no dehydrocoupling is observed, but an intermediate Rh(I) σ phosphine–borane complex is formed, [Rh(L){η²-H₃B·P(Ad)₂H}][BAr^F₄], that undergoes B–P bond cleavage to give [Rh(L){η¹-H₃B·P(Ad)₂H}{P(Ad)₂H}][BAr^F₄]. The relative rates of dehydrocoupling of H₃B·PR₂H (R = aryl) show that increasingly electron-withdrawing substituents result in faster dehydrocoupling, but also suffer from the formation of the parallel product resulting from P–B bond cleavage. H₃B·PCyH₂ undergoes a similar dehydrocoupling process, and gives a mixture of stereoisomers of the resulting metal-bound diboraphosphine that arise from activation of the prochiral P–H bonds, with one stereoisomer favored. This diastereomeric mixture may also be biased by use of a chiral phosphine ligand. The selectivity and efficiencies of resulting catalytic dehydrocoupling processes are also briefly discussed.

The effect of changing the steric and electronic profile of the phosphine of primary and secondary phosphine−boranes H₃B·PR₂H (R = H, aryl, adamantyl) on the Rh-catalyzed dehydrocoupling to form metal-bound linear diboraphosphines is reported.

Conversion of azides into diazo compounds in water

Diazo compounds are in widespread use in synthetic organic chemistry but have untapped potential in chemical biology. We report on the design and optimization of a phosphinoester that mediates the efficient conversion of azides into diazo compounds in phosphate buffer at neutral pH and room temperature. High yields are maintained in the presence of common nucleophilic or electrophilic functional groups, and reaction progress can be monitored by colorimetry. As azido groups are easy to install and maintain in biopolymers or their ligands, this new mode of azide reactivity could have substantial utility in chemical biology.

Extremely Electron-Rich, Boron-Functionalized, Icosahedral Carborane-Based Phosphinoboranes

We have prepared the first examples of B9-connected trivalent aryl and alkyl phosphinoborane species via Pd-catalyzed phosphination of 9-iodo-meta-carborane. Our studies highlight the unique electronic features of the B9-connected meta-carboranyl moiety as compared to its C1-based analogue. This work suggests that the B9-functionalized meta-carboranyl substituent in these ligands exhibits more electron-releasing character than any other known carbon-based substituent, ultimately laying the foundation for a new class of phosphine ligands with extremely electron-rich character.

γ-Selective cross-coupling of allylic silanolate salts with aromatic bromides using trialkylphosphonium tetrafluoroborate salts prepared directly from phosphine•borane adducts

The γ-selective, palladium-catalyzed cross-coupling of sodium (Z)-2-butenyldiethylsilanolate with a variety of aromatic bromides is reported. The protocol provides high yields (73-94%) and site selectivity (γ/α, 25:1 → > 99:1) in the coupling of electron-rich, electron-poor, sterically hindered, and heteroaromatic bromides. The use of a configurationally homogeneous (Z)-silanolate, nontransferable ethyl groups, and a sterically bulky trialkylphosphonium tetrafluoroborate salt (t-BuCy(2)PH(+)BF(4)(-)) prepared directly from the corresponding air-stable phosphine•borane adduct are critical to the success of the method.