Regioselective alkane oxygenation with H2O2 catalyzed by titanosilicalite TS-1

Selective Oxidation of Methane to Oxygenates using Oxygen via Tandem Catalysis

Selective oxidation of methane to oxygenates using low-cost and environment-friendly molecular oxygen (O₂ ) under mild reaction conditions is a promising strategy but still remains grand challenge. It is of great importance to accelerate the activation of O₂ to generate highly active oxygen species, such as hydroxyl peroxide and hydroxyl species to improve catalytic performance for selective oxidation of methane. Selective oxidation of methane using O₂ by coupling with in situ generation of hydrogen peroxide via tandem catalysis ensures the easy formation of active oxygen species for methane activation, leading to high oxygenates productivity under mild conditions. In this concept, we summarized the recent progresses for selective oxidation of methane to oxygenates using O₂ based on tandem catalysis by coupling with in situ generation of hydrogen peroxide. The remaining challenges and future perspectives for selective oxidation of methane to oxygenates via tandem catalysis were also proposed.

Selective Oxidation of Ethane to Acetic Acid Catalyzed by a C-Scorpionate Iron(II) Complex: A Homogeneous vs. Heterogeneous Comparison

The direct, one-pot oxidation of ethane to acetic acid was, for the first time, performed using a C-scorpionate complex anchored onto a magnetic core-shell support, the Fe₃O₄/TiO₂/[FeCl₂{κ³-HC(pz)₃}] composite. This catalytic system, where the magnetic catalyst is easily recovered and reused, is highly selective to the acetic acid synthesis. The performed green metrics calculations highlight the “greeness” of the new ethane oxidation procedure.

Solvent-free synthesis of MFI-type zeolites and their degradation properties of gas-phase styrene

In this study, a series of MFI-type zeolites with various compositions were synthesized by a solvent-free synthesis method at a comparatively mild condition. The results of investigations showed that the as-synthesized samples displayed a good crystallinity grade and regular morphology of layered structure. The crystallization process of TS-1 was systematic investigated. It was revealed that the transition stage of crystallization process was the formation of nucleation intermediates (Na₂SiF₆), which was the key factor for dropping Ti atoms into MFI framework. Meanwhile, it showed a high apparent nucleation activation energy (64.8 kJ mol^-1), and low growth activation energy (25.3 kJ mol^-1) in a spontaneous nucleation system, and the nucleation activation energy could be reduced to 17.2 kJ mol^-1 in non-spontaneous nucleation system. The as-synthesized zeolites were evaluated for their catalytic activity for the degradation of gas-phase styrene. The titanium silicalite-1 sample doped with iron exhibited excellent catalytic activity with 100% degradation of styrene. The method employed in this work not only decreases the production cost and energy-consumption of MFI-type zeolites, but also significantly enhances their production yield. Moreover, it is an efficient pathway to solve the pollution of volatile organic compounds using solid waste.

Low Temperature Oxidation of Ethane to Oxygenates by Oxygen over Iridium-Cluster Catalysts

Direct selective oxidation of light alkanes, such as ethane, into value-added chemical products under mild reaction conditions remains a challenge in both industry and academia. Herein, the iridium cluster and atomically dispersed iridium catalysts have been successfully fabricated using nanodiamond as support. The obtained iridium cluster catalyst shows remarkable performance for selective oxidation of ethane under oxygen at 100 °C, with an initial activity as high as 7.5 mol/mol/h and a selectivity to acetic acid higher than 70% after five in situ recycles. The presence of CO in the reaction feed is pivotal for the excellent reaction performance. On the basis of X-ray photoelectron spectroscopy (XPS) analysis, the critical role of CO was revealed, which is to maintain the metallic state of reactive Ir species during the oxidation cycles.

Oxidative functionalization of C–H compounds induced by the extremely efficient osmium catalysts (a review)

In recent years, osmium complexes have found applications not only in thecis-hydroxylation of olefins but also very efficient in the oxygenation of C–H compounds (saturated and aromatic hydrocarbons and alcohols) by hydrogen peroxide as well as organic peroxides.

The partial oxidation of propane under mild aqueous conditions with H2O2 and ZSM-5 catalysts

We report the oxidation of propane under mild aqueous conditions using H₂O₂ as the oxidant.

Low temperature selective oxidation of methane to methanol using titania supported gold palladium copper catalysts

Selective oxidation of methane using AuPdCu/TiO₂ catalysts.

Alkane oxidation with peroxides catalyzed by cage-like copper(ii) silsesquioxanes

Copper(ii) silsesquioxanes [(PhSiO_1.5)₁₂(CuO)₄(NaO_0.5)₄] or [(PhSiO_1.5)₁₀(CuO)₂(NaO_0.5)₂] are catalysts for alkane oxidation with H₂O₂ort-BuOOH.

Light alkane oxidation using catalysts prepared by chemical vapour impregnation: tuning alcohol selectivity through catalyst pre-treatment

Heat treating Fe/ZSM-5 under hydrogen leads to high dispersion of Fe species and higher alcohol selectivity in the oxidation of alkanes, as compared to oxygen treated catalysts.

Partial oxidation of ethane to oxygenates using Fe- and Cu-containing ZSM-5

Iron and copper containing ZSM-5 catalysts are effective for the partial oxidation of ethane with hydrogen peroxide giving combined oxygenate selectivities and productivities of up to 95.2% and 65 mol kgcat(-1) h(-1), respectively. High conversion of ethane (ca. 56%) to acetic acid (ca. 70% selectivity) can be observed. Detailed studies of this catalytic system reveal a complex reaction network in which the oxidation of ethane gives a range of C2 oxygenates, with sequential C-C bond cleavage generating C1 products. We demonstrate that ethene is also formed and can be subsequently oxidized. Ethanol can be directly produced from ethane, and does not originate from the decomposition of its corresponding alkylperoxy species, ethyl hydroperoxide. In contrast to our previously proposed mechanism for methane oxidation over similar zeolite catalysts, the mechanism of ethane oxidation involves carbon-based radicals, which lead to the high conversions we observe.

Catalytic and mechanistic insights of the low-temperature selective oxidation of methane over Cu-promoted Fe-ZSM-5

The partial oxidation of methane to methanol presents one of the most challenging targets in catalysis. Although this is the focus of much research, until recently, approaches had proceeded at low catalytic rates (<10 h(-1)), not resulted in a closed catalytic cycle, or were unable to produce methanol with a reasonable selectivity. Recent research has demonstrated, however, that a system composed of an iron- and copper-containing zeolite is able to catalytically convert methane to methanol with turnover frequencies (TOFs) of over 14,000 h(-1) by using H(2)O(2) as terminal oxidant. However, the precise roles of the catalyst and the full mechanistic cycle remain unclear. We hereby report a systematic study of the kinetic parameters and mechanistic features of the process, and present a reaction network consisting of the activation of methane, the formation of an activated hydroperoxy species, and the by-production of hydroxyl radicals. The catalytic system in question results in a low-energy methane activation route, and allows selective C(1)-oxidation to proceed under intrinsically mild reaction conditions.

Oxidative methane upgrading

The economically viable oxidative upgrading of methane presents one of the most difficult but rewarding challenges within catalysis research. Its potential to revolutionalise the chemical value chain, coupled with the associated supremely challenging scientific aspects, has ensured this topic's high popularity over the preceeding decades. Herein, we report a non-exhaustive account of the current developments within the field of oxidative methane upgrading and summarise the pertaining challenges that have yet to be solved.