Simple and efficient method for the synthesis of highly substituted imidazoles using zeolite-supported reagents

Copper borate (CuB4O7)-promoted multi-component green synthesis of 2,4,5-triarylimidazole derivatives and evidence of in situ conversion of copper borate (CuB4O7) into Cu(OAc)2 in the presence of NH4OAc

A green, efficient, and straightforward methodology for the three-component synthesis of 2,4,5-triarylimidazole has been developed under solvent-free conditions using unconventional CuB₄O₇ as a promoter. This green approach encouragingly provides access to a library of 2,4,5-tri-arylimidazole. Also, we have been able to isolate the compound (5) and (6) in situ, which provides an insight into the direct conversion of CuB₄O₇ into copper acetate in the presence of NH₄OAc under solvent-free condition. The main advantage of this protocol includes an easy reaction procedure, short reaction time, and easy work up of the product without using any tedious separation method.

Magnetic polyborate nanoparticles as a green and efficient catalyst for one-pot four-component synthesis of highly substituted imidazole derivatives

In this study, magnetic polyborate nanoparticles (MPBNPs) were prepared via a simple procedure from boric acid by using ball-milling and then characterized by various spectroscopic, microscopic and analytical methods including FT-IR, EDX, XRD, FESEM, VSM and TGA analysis. The obtained MPBNPs were further explored, as a green and highly efficient catalyst, in the multi-component synthesis of a wide range of tetra-substituted imidazoles from cascade cyclocondensation as well as in situ air oxidation of benzil or benzoin, aromatic aldehydes, primary amine and ammonium acetate in EtOH, as a green solvent, under reflux conditions. Additionally, environmentally friendly conditions for the preparation of the catalyst by the use of non-toxic reactants, facile procedure and high to excellent yields of the desired products as well as the use of a green solvent are some advantages of this new protocol.

An efficient green protocol for the synthesis of 1,2,4,5-tetrasubstituted imidazoles in the presence of ZSM-11 zeolite as a reusable catalyst

In this study, we have synthesized a series of ZSM-11 zeolite catalysts using tetrapropyl ammonium hydroxide as a structure-directing agent through a highly efficient hydrothermal method. The series of catalysts were studied by different techniques such as FT-IR spectroscopy, XRD, FE-SEM, HR-TEM, EDS, pyridine-FT-IR spectroscopy, and BET analysis. We focused on varying reaction time intervals from 18 to 48 hours to investigate the effect on catalytic activities of the synthesized series of catalysts. The percentages of aluminum increased in the framework of zeolites with increasing crystallinity, surface area, external surface area, and acidity in the series of ZSM-11 zeolites by increasing the time from 18 to 48 h. Then, we studied the catalytic activity of a series of ZSM-11 zeolites and found that the ZSM-11 zeolite (48 h) possesses higher catalytic activity towards the synthesis of 1,2,4,5-tetrasubstituted imidazoles under solvent-free conditions. The present protocol scored well with excellent yield, short reaction time, clean reaction profiles, low catalyst loading, and no tedious workup. The catalyst (ZSM-11 zeolite 48 h) was recycled and reused in five runs without any considerable loss of activity and product yield.

Imidazolium-Catalyzed Synthesis of an Imidazolium Catalyst

The chemistry of imidazolium-catalyzed imidazolium synthesis was studied as part of an effort to develop a plausible prebiotic synthesis of a small catalytic molecule capable of catalyzing its own synthesis. Specifically, we investigated the one-pot 1-ethyl-3-methylimidazolium acetate (EMIM-Ac) catalyzed synthesis of 1,3-dibutyl-4,5-difuryl-imidazolium acetate (DBDFIM-Ac) from furfural, n-butylamine, formaldehyde, and acetic acid at 80 °C. Liu et al. (2012) had previously demonstrated the first reaction of the synthetic process, the EMIM-Ac catalyzed benzoin condensation of furfural that yields furoin. Our early studies established the second reaction of the synthetic process, the multicomponent reaction of furoin, n-butylamine, formaldehyde, and acetic acid that yields the imidazolium salt, DBDFIM-Ac. Studies of the complete two-reaction process that uses furfural for the synthesis of DBDFIM-Ac showed that the highest yield of DBDFIM-Ac was obtained when the mole ratio of n-butylamine, formaldehyde, and acetic acid relative to furfural was respectively (0.5:0.25:0.25:1.0-furfural), or one-half of the stoichiometric ratio (1.0:0.5:0.5:1.0-furfural). A time course study of the process showed transient formation of furoin, the obligatory reaction intermediate. DBDFIM-Ac and the imidazolium side product, 1,3-dibutyl-4,5-trifuryl-imidazolium acetate (DBTFIM-Ac), were stable under the reaction conditions. Imidazolium products (DBDFIM and DBTFIM) and the furoin intermediate were not formed in control reactions (80 °C, 24 h) in which EMIM catalyst was either absent or replaced with an equal volume of acetonitrile or DMF. The imidazolium product, DBDFIM-Ac, was shown to catalyze the synthesis of structurally similar 1,3-dipentyl-4,5-difuryl-imidazolium acetate (DPDFIM-Ac) from furfural, n-pentylamine, formaldehyde, and acetic acid at 80 °C.

Direct synthesis of 2,4,5-trisubstituted imidazoles from primary alcohols by diruthenium(ii) catalysts under aerobic conditions

A straightforward synthetic approach to 2,4,5-trisubstituted imidazoles from readily available primary alcohols using arene diruthenium(ii) catalysts has been described.

Molecular Modeling Studies of Halogenated Imidazoles against 14α- Demethylase from Candida Albicans for Treating Fungal Infections

BACKGROUND

Imidazole is one of the most explored and marketed azole utilized for the treatment of fungal infections. Lanosterol 14α-demethylase (Cytochrome P450DM) is the active target site for azole antifungals.

AIM AND OBJECTIVE

This study emphasized on evaluation of a series of halogenated imidazole analogues using molecular docking studies for anti-Candidal activity. Furthermore, the model was refined by molecular dynamic simulation.

METHODS

Halogenated imidazole analogues (PS1-PS30) were obtained from literature for the study. The imidazole analogues were prepared using Chem sketch and molecular docking was performed using Molergo Virtual Docker program and ADMET study was carried out by using Accelry's Accord for Excel programme.

RESULTS

The docking study indicated that all the imidazole analogues (PS1-PS30) and standard drugs i.e., Ketoconazole, Miconazole and Clotrimazole possessed interaction with protein residue, heme cofactor and water molecule positioned above Heme cofactor of 14α-demethylase. Further, the ADMET study indicated that most of the halogenated imidazoles possessed good absorption, human intestinal absorption, aqueous solubility and blood brain penetration.

CONCLUSION

Halogenated imidazole analogues may be used as potential lead molecules as 14α- demethylase inhibitors.

An eco-compatible pathway to the synthesis of mono and bis-multisubstituted imidazoles over novel reusable ionic liquids: an efficient and green sonochemical process

Novel and environmentally benign ionic liquids are synthesized and used as robust catalysts for a sonochemical one pot multi-component synthetic route to functionalized annulated imidazoles in water with excellent yields.

An efficient green protocol for the synthesis of tetra-substituted imidazoles catalyzed by zeolite BEA: effect of surface acidity and polarity of zeolite

Zeolite BEA catalyzed synthesis of highly substituted imidazoles via a green approach.

A facile and efficient method for the synthesis of 1,2,4-trisubstituted imidazoles with enamides and benzylamines

A novel and practical method for the construction of 1,2,4-trisubstituted imidazoles with enamides and benzylamines catalysed by CuBr and I₂ has been developed.

Synthesis of 2,4,5-trisubstituted imidazoles, quinoxalines and 1,5-benzodiazepines over an eco-friendly and highly efficient ZrO2–Al2O3 catalyst

Where, R is alkyl, aryl, alkoxy, N,N-diethyl or halo group.

Multicomponent green synthesis, spectroscopic and structural investigation of multi-substituted imidazoles. Part 1

Ten 1,2,4,5-tetra-substituted imidazole derivatives have been synthesized with a 2-hydroxyethy substituent at the 1-nitrogen atom and potentially electron releasing hydroxy-, methoxy-, dimethylamino- or nitro substituents in various positions on the benzene ring located on the 2-carbon atom. The prototypical derivative with an unsubstituted phenyl ring at the 2-position is also reported. The compounds are obtained in excellent yields (average 86%) via a four-component cyclocondensation reaction of benzil, ethanolamine, and the appropriate aromatic carbaldehyde together with ammonium acetate. The reaction uses a novel ionic liquid catalyst, DEAHS (diethyl ammonium hydrogen sulfate), under solvent-free conditions and a green synthetic protocol. The key advantages of this process are high yield, shorter reaction times and ease of work-up. Furthermore, the products can be purified by a non-chromatographic method and the catalyst is re-usable. All of these newly synthesized compounds have been characterized from spectral data; the X-ray structures of three representative molecules are also detailed.

Current advances in the synthesis and biological potencies of tri- and tetra-substituted 1H-imidazoles

In this report, we review the current chemistry progress and in particular the synthesis approaches of tri- and tetra-substituted imidazoles.

Synthesis of 1,2,4,5-tetrasubstituted imidazoles using 2,6-dimethylpyridinium trinitromethanide {[2,6-DMPyH]C(NO2)3} as a novel nanostructured molten salt and green catalyst

2,6-Dimethylpyridinium trinitromethanide {[2,6-DMPyH]C(NO₂)₃} as a novel nanostructured molten salt catalyst (MS) was synthesized, characterized and used for the synthesis of 1,2,4,5-tetrasubstituted imidazoles under solvent-free conditions.

Optical and theoretical studies on Fe3O4–imidazole nanocomposite and clusters

The larger surface curvature of nanocrystals reduces steric hindrance between surface binding molecules and provides a larger number of unsaturated dangling bonds on the nanocrystal surface.

Synthesis and optical properties of phenanthromidazole derivatives for organic electroluminescent devices

The external quantum efficiency roll-off may be due to triplet–triplet annihilation (TTA) and triplet–polaron annihilation (TPA).

ZrO2-β-cyclodextrin catalyzed synthesis of 2,4,5-trisubstituted imidazoles and 1,2-disubstituted benzimidazoles under solvent free conditions and evaluation of their antibacterial study

A series of 2,4,5-trisubstituted imidazoles and 1,2-disubstituted benzimidazoles catalyzed by ZrO₂-supported-β-cyclodextrin (ZrO₂-β-CD) under solvent free conditions have been synthesized and characterized by spectral methods.

Silica coated magnetic NiFe2O4 nanoparticle supported phosphomolybdic acid; synthesis, preparation and its application as a heterogeneous and recyclable catalyst for the one-pot synthesis of tri- and tetra-substituted imidazoles under solvent free conditions

A novel heteropolyacid supported on silica coated nickel ferrite nanoparticles (NFS–PMA) was synthesized and used as a green catalyst for one-pot syntheses of tri/tetra-substituted imidazoles. The catalyst could be recycled and reused through application of a magnetic field.

Shape-dependent catalytic activity of Fe3O4 nanostructures under the influence of an external magnetic field for multicomponent reactions in aqueous media

Fe₃O₄ nanostructures were synthesized under external magnetic field, shown shape-dependent catalytic activity for the synthesis of imidazole derivatives in water.

Multi-component synthesis of highly substituted imidazoles catalyzed by nanorod vanadatesulfuric acid

Nanorod vanadatesulfuric acid (VSA NRs), as a recyclable and eco-benign catalyst, was used for one-pot synthesis of 2,4,5-trisubstituted imidazoles and 1,2,4,5-tetrasubstituted imidazoles using aldehydes, benzil, benzoin or 9,10-phenanthrenequinone and ammonium acetate or aniline under solvent-free conditions providing high to excellent yields. VSA is easily prepared by a simple reaction of chlorosulfonic acid and sodium metavanadate in high purity. As compared with the conventional procedures, the present protocol offers several advantages such as simplicity of procedure, short reaction time, high yields, easy workup, recoverability and reusability of the catalyst and simple purification of the products.

Synthesis of 2-aryl-1,1-Bis(Silyl)Alkenes-Containing Tetrasubstituted Imidazoles Catalysed by M–Cu/ZSM-5 (M: Cr, Mn, Co, Ni, V, Zn and Fe) Zeolites-Supported Bimetallic Nanostructures

The one-pot synthesis of tetrasubstituted imidazoles by using a series of M-Cu/ZSM-5 (M: Cr, Mn, Co, Ni, V, Zn and Fe) zeolites-supported bimetallic catalysts was studied. Fe-Cu/ZSM-5 bimetallic oxide catalyst had the highest activity in improving the efficiency of the heterogeneous cyclo-condensation reaction. Some imidazole derivatives terminated by vinylbis(silanes) have been synthesised using (Me3Si)3CLi through the Peterson olefination reaction.

A concise synthesis of highly substituted imidazoles via copper-mediated oxidative C-H functionalization

We herein report a simple and concise route for the synthesis of highly substituted imidazole derivatives via copper-mediated oxidative C-H functionalization in good to high yields. The advantage of the reaction lies in its mild reaction conditions and readily available starting materials.