Bismuth-Catalyzed Synthesis of 2-Substituted Quinazolinones

Polyoxometalate-Based Metal-Organic Frameworks with Both Proton Acid and Multioxidative Active Sites: Highly Efficient Catalytic Synthesis of Quinazolinones

Quinazolinone derivatives are an important class of pharmaceutical and pesticide intermediates, which are generally synthesized starting with the condensation reaction between aldehydes and 2-aminobenzamide to obtain corresponding intermediates and then oxidized to obtain the products. Although some catalysts have been developed currently for the synthesis of quinazolinone derivatives, their catalytic efficiency is relatively low because only the oxidative catalytic sites of the catalyst have been focused on. Herein, we synthesized three new polyoxometalate-based metal-organic frameworks, [CuI4(4,4'-bipy)7(Hn-1PMo12-nVnO40)]·2H2O (n = 1-3), which were formed by coordinating a Cu(I)-bipy complex with different Keggin-type phosphomolybdic acids. An important feature of these compounds is that they possess proton and multioxidative active sites [Cu(I) center and V(V) center]; thus, we applied them to the catalytic synthesis of quinazolinone derivatives. The results indicate that compound 3 has an excellent catalytic activity. Based on density functional theory calculations, it is speculated that protons participate in the aldehyde amine condensation reaction, which changes the reaction pathway and reduces the activation energy from 55.1 to 31.4 kcal/mol, thereby increasing the reaction rate significantly. Interestingly, Raman spectra and electron paramagnetic resonance measurements indicate the presence of CuIIOO• and •O2- during the oxidative dehydrogenation process, which facilitates the rapid consumption of 2-phenyl-2,3-dihydroquinazolin-4(1H)-one intermediates, thereby promoting the chemical reaction to move toward the positive direction. Thanks to the synergistic effect of multicatalytic sites, compound 3 achieved highly efficient catalytic synthesis of quinazolinones with 99% yield in 1 h.

Visible light-mediated synthesis of quinazolinones from benzyl bromides and 2-aminobenzamides without using any photocatalyst or additive

This paper reports a novel method for the visible-light-mediated synthesis of quinazolinones from the reaction of benzyl bromides with 2-aminobenzamides. The reaction proceeded efficiently at room temperature upon irradiation with an 18 W blue light-emitting diode in air without photocatalysts or additives. By varying the solvent type, substrate molar ratio, and reaction time, the optimal reaction conditions, including the use of methanol solvent, room temperature, and reaction time of 28 h, were identified. Under these conditions, various quinazolinones were obtained using 18 substrates, with the highest yield of 93%. To determine the industrial value of the proposed method, a scale-up reaction was performed and 80% product yield was achieved. Mechanistic studies revealed that the reaction likely proceeded via a radical pathway and that the hydrogen bromide by-product generated during the first step of the reaction of benzyl bromide with 2-aminobenzamide promoted the subsequent step.

Designing a new method for growing metal-organic framework (MOF) on MOF: synthesis, characterization and catalytic applications

Metal-organic frameworks as a unique class of high-surface-area materials have gained considerable attention due to their characteristic properties. In this perspective, herein, we report an eco-friendly and inexpensive route for the synthesis of 4(3H)-quinazolinones using magnetically separable core-shell-like bimetallic Fe₃O₄-MAA@Co-MOF@Cu-MOF NPs as environmentally-friendly heterogeneous catalysts. To the best of our knowledge, this is the first example of the integration of two different types of MOFs, which contain two different metal ions (Co²⁺ in the core and Cu²⁺ in the shell) using an external ligand. Our study not only introduces a novel nanostructured catalyst for the organic reaction but also presents a new strategy for the combination of two MOFs in one particle at the nanometer level. To survey the structural and compositional features of the synthesized nanocatalyst, a variety of spectroscopic and microscopic techniques including FT-IR, XRD, BET, TEM, HR-TEM, FE-SEM, EDX, EDX-mapping, TGA, VSM, and ICP-OES were employed. The combination of magnetic Co-MOF with Cu-MOF leads to achieving unique structural and compositional properties for Fe₃O₄-MAA@Co-MOF@Cu-MOF NPs with a particle size of 20-70 nm, mesostructure, and relatively large specific surface area (236.16 m² g^-1). The as-prepared nanostructured catalyst can be an excellent environment catalyst for the synthesis of a wide library of 4(3H)-quinazolinones derivatives, including electron-donating and electron-withdrawing aromatic, heteroaromatic, and aliphatic compounds under solvent-free conditions much better than the parent precursors. Moreover, by investigating the longevity of the nanocatalyst, the conclusion could be derived that the aforesaid nanocatalyst is stable under reaction conditions and could be recycled for at least seven recycle runs without a discernible decrease in its catalytic activity.

Discovery of fluorinated 2‑Styryl 4(3H)-quinazolinone as potential therapeutic hit for oral cancer

Oral squamous cell carcinoma (OSCC) is the most common malignant epithelial neoplasm, affects the mouth and throat, and accounts for 90 % of oral cancers. Considering the associated morbidity with neck dissections and the limitation of existing therapeutic agents, the discovery and development of new anticancer drugs/drug candidates for oral cancer treatment are of the utmost need. In this context, reported here is the identification of fluorinated 2‑styryl 4(3H)-quinazolinone as a promising hit for oral cancer. Preliminary studies indicate that the compound blocks the transition of G1 to S phase, thereby leading to arrest in the G1/S phase. Subsequent RNA-seq analysis revealed that the compound induces the activation of molecular pathways involved in apoptosis (such as TNF signalling through NF-κB, p53 pathways) and cell differentiation and suppresses the pathways of cellular growth and development (such as KRAS signaling) in CAL-27 cancer cells. It is noted that identified hit complies with a favorable range of ADME properties as per the computational analysis.

Fast quinazolinone synthesis by combining enzymatic catalysis and photocatalysis

A fast and highly efficient method for the synthesis of functionalized quinazolinones by combining enzymatic catalysis and photocatalysis is reported. The α-Chymotrypsin catalyzed the cyclization of aldehyde and 2-aminobenzamide, which was subsequently followed by White LED-induced oxidation of 2-phenyl-2, 3-dihydroquinazolin-4(1H)-one to obtain quinazolinone. The reaction process was highly efficient with a reaction yield of 99% in just 2 h, and a wide range of quinazolinones could be synthesized. Furthermore, the plausible mechanism was investigated by control experiments and DFT calculations. This protocol provides an alternative synthetic route for the preparation of quinazolinone derivatives.

Synthesis, antitumor activity, 3D-QSAR and molecular docking studies of new iodinated 4-(3H)-quinazolinones 3N-substituted

A novel series of 6-iodo-2-methylquinazolin-4-(3H)-one derivatives, 3a–n, were synthesized and evaluated for their in vitro cytotoxic activity. Compounds 3a, 3b, 3d, 3e, and 3h showed remarkable cytotoxic activity on specific human cancer cell lines when compared to the anti-cancer drug, paclitaxel. Compound 3a was found to be particularly effective on promyelocytic leukaemia HL60 and non-Hodgkin lymphoma U937, with IC₅₀ values of 21 and 30 μM, respectively. Compound 3d showed significant activity against cervical cancer HeLa (IC₅₀ = 10 μM). The compounds 3e and 3h were strongly active against glioblastoma multiform tumour T98G, with IC₅₀ values of 12 and 22 μM, respectively. These five compounds showed an interesting cytotoxic activity on four human cancer cell types of high incidence. The molecular docking results reveal a good correlation between experimental activity and calculated binding affinity on dihydrofolate reductase (DHFR). Docking studies proved 3d as the most potent compound. In addition, the three-dimensional quantitative structure–activity relationship (3D-QSAR) analysis exhibited activities that may indicate the existence of electron-withdrawing and lipophilic groups at the para-position of the phenyl ring and hydrophobic interactions of the quinazolinic ring in the DHFR active site.

New iodinated 4-(3H)-quinazolinones 3N-substituted with antitumor activity and 3D-QSAR and molecular docking studies as dihydrofolate reductase (DHFR) inhibitors.

Design of Photosensitive Cobalt Complex Intermediates and Their Application in the Green Syntheses of Molecules Containing the Quinazolin-4(3H)-imine Scaffold

Cobalt/photoredox cooperative catalysis is a well-explored technology for visible-light photoredox catalysis. Recently, the photosensitivity of Co(II) complexes in homogeneous catalysis has aroused the interest of scientists. In this study, photosensitive Co(II) complex intermediates were designed to develop new synthetic methods. These intermediates, consisting of Co(II) and two substrate molecules, bind to O₂ and absorb visible light over a wide spectral range, triggering in situ oxidative decarboxylation to produce molecules containing the quinazolin-4(3H)-imine scaffold. These reactions employed glyoxylic acid and ketoacids as new building blocks, and good to excellent yields of the corresponding products were obtained under mild reaction conditions using green and inexpensive reagents and solvents. These results are of importance since the design of Co-based photosensitive intermediates will aid in establishing novel methods for harnessing visible light and hence lead to innovation in organic syntheses.

Synthesis of quinazoline by decarboxylation of 2-aminobenzylamine and α-keto acid under visible light catalysis

Quinazoline compounds demonstrate a variety of physiological and pharmacological activities. However, the most common syntheses require large quantities of oxidants, high temperature, and other extreme conditions. In this study, quinazoline compounds were synthesized from the condensation of α-keto acid and 2-aminobenzylamine and then decarboxylation under blue LED irradiation at room temperature without transition metal catalysts or additives. Therefore, we demonstrated that by using α-keto acid as the acyl source, decarboxylation can be realized under blue LED without oxidants, in a simple, mild, and environmentally friendly process.

Electro-oxidative cyclization: access to quinazolinones via K2S2O8 without transition metal catalyst and base

A K₂S₂O₈-promoted oxidative tandem cyclization of primary alcohols with 2-aminobenzamides to synthesize quinazolinones was successfully achieved under undivided electrolytic conditions without a transition metal and base. The key feature of this protocol is the utilization of K₂S₂O₈ as an inexpensive and easy-to-handle radical surrogate that can effectively promote the reaction via a simple procedure, leading to the formation of nitrogen heterocycles via direct oxidative cyclization at room temperature in a one-pot procedure under constant current. Owing to the use of continuous-flow electrochemical setups, this green, mild and practical electrosynthesis features high efficiency and excellent functional group tolerance and is easy to scale up.

A K₂S₂O₈-promoted oxidative tandem cyclization of primary alcohols with 2-aminobenzamides to synthesize quinazolinones was successfully achieved under undivided electrolytic conditions without a transition metal and base.

Electrochemically induced synthesis of quinazolinones via cathode hydration of o-aminobenzonitriles in aqueous solutions

An efficient and practical electrochemically catalyzed transition metal-free process for the synthesis of substituted quinazolinones from simple and readily available o-aminobenzonitriles and aldehydes in water has been accomplished. I₂/base and water play an unprecedented and vital role in the reaction. By electrochemically catalysed hydrolysis of o-aminobenzonitriles, the synthesis of quinazolinones with benzaldehyde was first proposed. The synthetic utility of this method was demonstrated by gram-scale operation, as well as the preparation of bioactive N-(2,5-dichlorophenyl)-6-(2,2,2-trifluoroethoxy) pteridin-4-amine, which enables straightforward, practical and environmentally benign quinazolinone formation.

Well-Defined Pre-Catalysts in Amide and Ester Bond Activation

Over the past few decades, transition metal catalysis has witnessed a rapid and extensive development. The discovery and development of cross-coupling reactions is considered to be one of the most important advancements in the field of organic synthesis. The design and synthesis of well-defined and bench-stable transition metal pre-catalysts provide a significant improvement over the current catalytic systems in cross-coupling reactions, avoiding excess use of expensive ligands and harsh conditions for the synthesis of pharmaceuticals, agrochemicals and materials. Among various well-defined pre-catalysts, the use of Pd(II)-NHC, particularly, provided new avenues to expand the scope of cross-coupling reactions incorporating unreactive electrophiles, such as amides and esters. The strong σ-donation and tunable steric bulk of NHC ligands in Pd-NHC complexes facilitate oxidative addition and reductive elimination steps enabling the cross-coupling of broad range of amides and esters using facile conditions contrary to the arduous conditions employed under traditional catalytic conditions. Owing to the favorable catalytic activity of Pd-NHC catalysts, a tremendous progress was made in their utilization for cross-coupling reactions via selective acyl C⁻X (X=N, O) bond cleavage. This review highlights the recent advances made in the utilization of well-defined pre-catalysts for C⁻C and C⁻N bond forming reactions via selective amide and ester bond cleavage.