Quantitative analysis of clot density, fibrin fiber radius, and protofibril packing in acute phase myocardial infarction

Fungi Fibrinolytic Compound 1 Plays a Core Role in Modulating Fibrinolysis, Altering Plasma Clot Structure, and Promoting Susceptibility to Lysis

Fibrin clot structure and function are major determinants of venous and arterial thromboembolic diseases, as well as the key determinants of the efficiency of clot lysis. Studies have revealed that fungi fibrinolytic compound 1 (FGFC1) is a novel marine pyranisoindolone natural product with fibrinolytic activity. Here, we explore the impacts of FGFC1 on clot structure, lysis, and plasminogen activation in vitro using turbidimetric, enzyme-linked immunosorbent assay, confocal and electron microscopy, urokinase, or plasmin chromogenic substrate. Clots formed in the presence of FGFC1 expressed reduced fibrin polymerization rate and maximum turbidity; however, they did not influence the lag phase of fibrin polymerization. In the absence of scu-PA (single-chain urokinase plasminogen activator), microscopy revealed that FGFC1 increased the number of protofibrils within fibrin fiber and the pore diameter between protofibrils, inducing clots to form a region of thinner and looser networks separated by large pores. The effects of FGFC1 on scu-PA-mediated plasma clot structure were similar to those in the absence of scu-PA. In addition, FGFC1 promoted the lysis of clots and increased the D-dimer concentration in lysate. FGFC1 increased the generation rate of p-nitroaniline in plasma. These results show that FGFC1 has fibrinolytic activity in plasma, leading to interference with the release of fibrinopeptide B to affect lateral aggregation of protofibrils and increase clot susceptibility to fibrinolysis by altering its structure.

DNA and histones impair the mechanical stability and lytic susceptibility of fibrin formed by staphylocoagulase

Background

Staphylocoagulase (SCG) is a virulence factor of Staphylococcus aureus, one of the most lethal pathogens of our times. The complex of SCG with prothrombin (SCG/ProT) can clot fibrinogen, and SCG/ProT-induced fibrin and plasma clots have been described to show decreased mechanical and lytic resistance, which may contribute to septic emboli from infected cardiac vegetations. At infection sites, neutrophils can release DNA and histones, as parts of neutrophil extracellular traps (NETs), which in turn favor thrombosis, inhibit fibrinolysis and strengthen clot structure.

Objectives

To characterize the combined effects of major NET-components (DNA, histone H1 and H3) on SCG/ProT-induced clot structure, mechanical and lytic stability.

Methods

Recombinant SCG was used to clot purified fibrinogen and plasma. The kinetics of formation and lysis of fibrin and plasma clots containing H1 or core histones+/-DNA were followed by turbidimetry. Fibrin structure and mechanical stability were characterized with scanning electron microscopy, pressure-driven permeation, and oscillation rheometry.

Results

Histones and DNA favored the formation of thicker fibrin fibers and a more heterogeneous clot structure including high porosity with H1 histone, whereas low porosity with core histones and DNA. As opposed to previous observations with thrombin-induced clots, SCG/ProT-induced fibrin was not mechanically stabilized by histones. Similarly to thrombin-induced clots, the DNA-histone complexes prolonged fibrinolysis with tissue-type plasminogen activator (up to 2-fold). The anti-fibrinolytic effect of the DNA and DNA-H3 complex was observed in plasma clots too. Heparin (low molecular weight) accelerated the lysis of SCG/ProT-clots from plasma, even if DNA and histones were also present.

Conclusions

In the interplay of NETs and fibrin formed by SCG, DNA and histones promote structural heterogeneity in the clots, and fail to stabilize them against mechanical stress. The DNA-histone complexes render the SCG-fibrin more resistant to lysis and thereby less prone to embolization.

What is the diameter of a fibrin fiber?

Background

Altered fibrin fiber structure is linked to pathologic states, including coronary heart disease, ischemic stroke, and atherosclerosis. However, several different techniques are commonly utilized for studying fibrin structures, and comparison of results obtained using different techniques can be challenging due to lack of standardization.

Objectives

This study provides a path toward standardization by comparing fibrin fiber diameters for a range of physiologic fibrinogen and thrombin concentrations using multiple different complementary experimental methods.

Methods

We determined fiber diameter using scanning electron microscopy (SEM), superresolution (stochastic optical reconstruction microscopy) fluorescence microscopy, and 4 commonly utilized turbidimetric approaches to determine the congruence between the results and the conditions under which each should be used.

Results

We found that diameter values obtained using SEM and superresolution imaging agree within 10% for nearly all conditions tested. We also found that when a wavelength range of 500 to 800 nm was used for measurements and accounting for the wavelength dependence of the refractive index and specific refractive index increment, diameters obtained using the corrected Yeromonahos turbidimetric approach agree with SEM within 20% for most conditions.

Conclusion

We performed a systematic, multitechnique survey assessing fibrin fiber diameters under a range of biochemical conditions. The similarity in the diameter values obtained using SEM and superresolution imaging suggests that drying and fixation during SEM sample preparation do not dramatically alter fiber cross-sections. Congruence, under certain conditions, between diameter values obtained using SEM, superresolution fluorescence imaging, and turbidimetry demonstrates the feasibility of a fibrin diameter standardization project.

Fibrin clot properties in cardiovascular disease: from basic mechanisms to clinical practice

Fibrinogen conversion into insoluble fibrin and the formation of a stable clot is the final step of the coagulation cascade. Fibrin clot porosity and its susceptibility to plasmin-mediated lysis are the key fibrin measures, describing the properties of clots prepared ex vivo from citrated plasma. Cardiovascular disease (CVD), referring to coronary heart disease, heart failure, stroke, and hypertension, has been shown to be associated with the formation of dense fibrin networks that are relatively resistant to lysis. Denser fibrin mesh characterized acute patients at the onset of myocardial infarction or ischaemic stroke, while hypofibrinolysis has been identified as a persistent fibrin feature in patients following thrombotic events or in those with stable coronary artery disease. Traditional cardiovascular risk factors, such as smoking, diabetes mellitus, hyperlipidaemia, obesity, and hypertension, have also been linked with unfavourably altered fibrin clot properties, while some lifestyle modifications and pharmacological treatment, in particular statins and anticoagulants, may improve fibrin structure and function. Prospective studies have suggested that prothrombotic fibrin clot phenotype can predict cardiovascular events in short- and long-term follow-ups. Mutations and splice variants of the fibrinogen molecule that have been proved to be associated with thrombophilia or increased cardiovascular risk, along with fibrinogen post-translational modifications, prothrombotic state, inflammation, platelet activation, and neutrophil extracellular traps formation, contribute also to prothrombotic fibrin clot phenotype. Moreover, about 500 clot-bound proteins have been identified within plasma fibrin clots, including fibronectin, α2-antiplasmin, factor XIII, complement component C3, and histidine-rich glycoprotein. This review summarizes the current knowledge on the mechanisms underlying unfavourable fibrin clot properties and their implications in CVD and its thrombo-embolic manifestations.

The Applicability of Current Turbidimetric Approaches for Analyzing Fibrin Fibers and Other Filamentous Networks

Turbidimetry is an experimental technique often used to study the structure of filamentous networks. To extract structural properties such as filament diameter from turbidimetric data, simplifications to light scattering theory must be employed. In this work, we evaluate the applicability of three commonly utilized turbidimetric analysis approaches, each using slightly different simplifications. We make a specific application towards analyzing fibrin fibers, which form the structural scaffold of blood clots, but the results are generalizable. Numerical simulations were utilized to assess the applicability of each approach across a range of fiber lengths and diameters. Simulation results indicated that all three turbidimetric approaches commonly underestimate fiber diameter, and that the “Carr-Hermans” approach, utilizing wavelengths in the range of 500−800 nm, provided <10% error for the largest number of diameter/length combinations. These theoretical results were confirmed, under select conditions, via the comparison of fiber diameters extracted from experimental turbidimetric data, with diameters obtained using super-resolution microscopy.

Automated Fiber Diameter and Porosity Measurements of Plasma Clots in Scanning Electron Microscopy Images

Scanning Electron Microscopy (SEM) is a powerful, high-resolution imaging technique widely used to analyze the structure of fibrin networks. Currently, structural features, such as fiber diameter, length, density, and porosity, are mostly analyzed manually, which is tedious and may introduce user bias. A reliable, automated structural image analysis method would mitigate these drawbacks. We evaluated the performance of DiameterJ (an ImageJ plug-in) for analyzing fibrin fiber diameter by comparing automated DiameterJ outputs with manual diameter measurements in four SEM data sets with different imaging parameters. We also investigated correlations between biophysical fibrin clot properties and diameter, and between clot permeability and DiameterJ-determined clot porosity. Several of the 24 DiameterJ algorithms returned diameter values that highly correlated with and closely matched the values of the manual measurements. However, optimal performance was dependent on the pixel size of the images—best results were obtained for images with a pixel size of 8–10 nm (13–16 pixels/fiber). Larger or smaller pixels resulted in an over- or underestimation of diameter values, respectively. The correlation between clot permeability and DiameterJ-determined clot porosity was modest, likely because it is difficult to establish the correct image depth of field in this analysis. In conclusion, several DiameterJ algorithms (M6, M5, T3) perform well for diameter determination from SEM images, given the appropriate imaging conditions (13–16 pixels/fiber). Determining fibrin clot porosity via DiameterJ is challenging.