Surface coating of zein nanoparticles to improve the application of bioactive compounds: A review

Construction of quaternary ammonium chitosan-coated protein nanoparticles as novel delivery system for curcumin: Characterization, stability, antioxidant activity and bio-accessibility

This research aimed to develop a novel, effective, and stable delivery system based on zein (ZE), sodium caseinate (SC), and quaternary ammonium chitosan (HACC) for curcumin (CUR). The pH-driven self-assembly combined with electrostatic deposition methods were employed to construct CUR-loaded ZE-SC nanoparticles with HACC coating (ZE-SC@HACC). The optimized nanocomposite was prepared at ZE:SC:HACC:CUR mass ratios of 1:1:2:0.1, and it had encapsulation efficiency of 89.3%, average diameter of 218.2 nm, and ζ-potential of 40.7 mV. The assembly of composites and encapsulation of CUR were facilitated primarily by hydrophobic, hydrogen-bonding, and electrostatic interactions. Physicochemical stability analysis revealed that HACC coating dramatically enhanced ZE-SC nanoparticles' colloidal stability and CUR's resistance to chemical degradation. Additionally, antioxidant activity and simulated digestion results indicated that CUR-ZE-SC@HACC nanoparticles showed higher free radical scavenging capacity and bio-accessibility of CUR than CUR-ZE-SC nanoparticles and free CUR. Therefore, the ZE-SC@HACC nanocomposite is an effective and viable delivery system for CUR.

Antimicrobial guar gum films optimized with Pickering emulsions of zein-gum arabic nanoparticle-stabilized composite essential oil for food preservation

In this study, composite essential oil Pickering emulsion stabilized with zein-gum arabic (GA) nanoparticles (ZGCEO) was prepared to improve the characteristics of guar gum (GG) films. ZGCEO exhibited commendable stability and compatibility with GG, while leading to a noticeable improvement in the light barrier (from 3.98 A mm-1 to 17.09 A mm-1) and water vapor barrier characteristics of GG films, concomitantly mitigating their hydrophilic nature, with decreasing moisture content (from 17.70 % to 10.50 %), water solubility (from 84.41 % to 71.79 %), water vapor permeability (from 5.64 × 10-11 g (m s Pa)-1 to 4.97 × 10-11 g (m s Pa)-1), and an increasing water contact angle (from 69.8° to 94.2°). The addition of 2 % ZGCEO yielded a notable increase in the tensile strength of the GG-ZGCEO films, but the elongation at break decreased with increasing ZGCEO concentration. Moreover, the incorporated ZGCEO demonstrated outstanding antioxidant and antimicrobial characteristics, featuring a slow-release behavior of essential oil. The GG-ZGCEO coating also showed an excellent preservation effect in pork and "Huangguan" pears during storage. Collectively, we substantiated the efficacy of ZGCEO in augmenting the functional attributes of GG films, thereby establishing their potential utility as antimicrobial packaging materials conducive to food preservation.

Interaction of zein/HP-β-CD nanoparticles with digestive enzymes: Enhancing curcumin bioavailability

The low bioavailability of polyphenolic compounds due to poor solubility and stability is a major challenge. Encapsulation of polyphenols in zein-based composite nanoparticles can improve the water dispersion, stability, targeted delivery, and controlled release of polyphenols in the gastrointestinal tract. In this study, we investigated the fluorescence properties, bioactivity, and microstructural characteristics of polyphenols during digestion, revealing that zein nanoparticles protect polyphenols from gastric degradation and promote their sustained release in the small intestine. The effects of different ionic species and salt ion concentrations on the digestive properties of polyphenol complex delivery systems have also been explored. In addition, the formation of "protein corona" structures during digestion may affect bioavailability. These findings highlight the potential of nanoparticle formulations to improve polyphenol stability and absorption. The results of this study may provide new insights and references for the study of polyphenol bioavailability enhancement.

Lignin nanoparticle as a vehicle to load, release, and improve the stability and antioxidant activity of curcumin: Comparison between dropping and pouring regimes

Curcumin (Cur) was loaded in lignin nanoparticles (LNP) via an antisolvent method by pouring (P-) and dropping (D-) regimes, respectively, and Cur-loaded LNP (Cur/LNP) were comparatively characterized. The results indicated that P-Cur/LNP (62-92 nm) was much smaller than D-Cur/LNP (134-139 nm). For both regimes, their maximum loading efficiencies were comparable (91 ± 3%), while dropping regime (236.2 mg/g) demonstrated a higher loading capacity than pouring regime (174.6 mg/g). In both regimes, Cur was loaded in an amorphous form via the hydrophobic, hydrogen-bonding, and π-π interactions with lignin matrix and it demonstrated a controlled release in in vitro digestion test. In comparison, Cur in D-Cur/LNP showed higher stabilities against photodegradation, thermal treatment, and 30-d storage than that in P-Cur/LNP, while P-Cur/LNP concluded a higher antioxidant activity than D-Cur/LNP. The present findings attested that LNP was a valuable tool to stabilize and controlled release of lipophilic phytochemicals as well as improve their bioactivities.

Stabilization of zein nanoparticles with tween-80 and fucoidan for encapsulation of eugenol via a nozzle simulation chip

Eugenol (EU), a natural bioactive compound found in various plants, offers numerous health benefits, but its application in the food and pharmaceutical industry is limited by its high volatility, instability, and low water solubility. Therefore, this study aimed to utilize the surface coating technique to develop zein-tween-80-fucoidan (Z-T-FD) composite nanoparticles for encapsulating eugenol using a nozzle simulation chip. The physicochemical characteristics of the composite nanoparticles were examined by varying the weight ratios of Z, T, and FD. Results showed that the Z-T-FD weight ratio of 5:1:15 exhibited excellent colloidal stability under a range of conditions, including pH (2-8), salt concentrations (10-500 mmol/L), heating (80 °C), and storage (30 days). Encapsulation of EU into Z-T-FD nanoparticles (0.5:5:1:15) resulted in an encapsulation efficiency of 49.29 ± 1.00%, loading capacity of 0.46 ± 0.05%, particle size of 205.01 ± 3.25 nm, PDI of 0.179 ± 0.006, and zeta-potential of 37.12 ± 1.87 mV. Spherical structures were formed through hydrophobic interaction and hydrogen bonding, as confirmed by Fourier transform infrared spectroscopy and molecular docking. Furthermore, the EU-Z-T-FD (0.5:5:1:15) nanoparticles displayed higher in vitro antioxidant properties (with DPPH and ABTS radical scavenging properties at 75.28 ± 0.16% and 39.13 ± 1.22%, respectively), in vitro bioaccessibility (64.78 ± 1.37%), and retention rates under thermal and storage conditions for EU compared to other formulations. These findings demonstrate that the Z-T-FD nanoparticle system can effectively encapsulate, protect, and deliver eugenol, making it a promising option for applications in the food and pharmaceutical industries.

Shellac-based delivery systems for food bioactive compounds

Shellac is a natural resin featuring some attractive properties such as amphiphilicity, pH responsiveness, biocompatibility, and biodegradability. There has been increasing interest in employing shellac for controlled delivery of food bioactive compounds. This review outlines the recent advances in different types of shellac-based delivery systems, including nanoparticles, zein-shellac particles, hydrogels, nanofibers, and nanomicelles. The preparation method, formation mechanism, structure, and delivery performance are investigated. These systems could improve the stability and shelf-life of bioactive compounds, allow for targeted release at the small intestine or colon site, and increase bioavailability. The deficiencies and challenges of each of the systems are also discussed. The promising results in this review could guide future trends in more efficient shellac-based delivery platforms for functional food applications.

Synthesis of polymeric nanoparticles by double emulsion and pH-driven: encapsulation of antibiotics and natural products for combating Escherichia coli infections

The design, development, and obtaining of nanostructured materials, such as polymeric nanoparticles, have garnered interest due to loading therapeutic agents and its broad applicability. Polymeric nanoparticle synthesis employs advanced techniques such as the double emulsion approach and the pH-driven method, allowing the efficient incorporation of active compounds into these matrices. These loading methods ensure compound stability within the polymeric structure and enable control of the release of therapeutic agents. The ability of loaded polymeric nanoparticles to transport and release therapeutic agents on target manner represents a significant advancement in the quest for effective therapeutic solutions. Amid escalating concerns regarding antimicrobial resistance, interventions using polymeric nanostructures stand out for the possibility of carrying antimicrobial agents and enhancing antibacterial action against antibiotic-resistant bacteria, making a new therapeutic approach or complement to conventional treatments. In this sense, the capability of these polymeric nanoparticles to act against Escherichia coli underscores their relevance in controlling bacterial infections. This mini-review provides a comprehensive synthesis of promising techniques for loading therapeutic agents into polymeric nanoparticles highlighting methodologies and their implications, addressing prospects of combating bacterial infections caused by E. coli. KEY POINTS: • The double emulsion method provides control over size and release of bioactives. • The pH-driven method improves the solubility, stability, and release of active. • The methods increase the antibacterial action of those encapsulated in PNPs.

Nanoencapsulation and delivery of bioactive ingredients using zein nanocarriers: approaches, characterization, applications, and perspectives

Zein has garnered widespread attention as a versatile material for nanosized delivery systems due to its unique self-assembly properties, amphiphilicity, and biocompatibility characteristics. This review provides an overview of current approaches, characterizations, applications, and perspectives of nanoencapsulation and delivery of bioactive ingredients within zein-based nanocarriers. Various nanoencapsulation strategies for bioactive ingredients using various types of zein-based nanocarrier structures, including nanoparticles, nanofibers, nanoemulsions, and nanogels, are discussed in detail. Factors affecting the stability of zein nanocarriers and characterization methods of bioactive-loaded zein nanocarrier structures are highlighted. Additionally, current applications of zein nanocarriers loaded with bioactive ingredients are summarized. This review will serve as a guide for the selection of appropriate nanoencapsulation techniques within zein nanocarriers and a comprehensive understanding of zein-based nanocarriers for specific applications in the food, pharmaceutical, cosmetic, and agricultural industries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01489-6.

Multi-spectroscopies and molecular docking insights into the interaction mechanism and antioxidant activity of isoquercetin and zein nanoparticles

The purpose of this study was to compare and characterize the theoretical properties and interaction mechanisms of zein and isoquercetin (ISO) from experimental and theoretical perspectives. Zein nanoparticles with different ISO concentrations (ZINPs) were prepared by the antisolvent precipitation method. The experimental results indicated all particles appeared spherical. When the mass ratio of zein to ISO was 10:1, the encapsulation efficiency of ZINPs reached 88.19 % with an average diameter of 126.67 nm. The multispectral method and molecular docking results confirmed that hydrogen bonding and van der Waals force played a dominant role for the binding of ISO to zein, and the primary fluorescence quenching mechanism for zein by ISO was static quenching. Furthermore, ZINPs had greater solubility and antioxidant activity, as well as inhibited the release of ISO during simulated gastrointestinal digestion processes. This research contributes to the understanding of the non-covalent binding mechanism between zein and ISO, providing a theoretical basis for the construction of ISO active carriers.

Fabrication of zein-tamarind seed polysaccharide-curcumin nanocomplexes: their characterization and impact on alleviating colitis and gut microbiota dysbiosis in mice

In this work, a zein-tamarind seed polysaccharide (TSP) co-delivery system was fabricated using an anti-solvent precipitation method. The formation mechanism, characterization, and effect on alleviating colitis and gut microbiota dysbiosis in mice of zein-TSP-curcumin (Z/T-Cur) nanocomplexes were investigated. Hydrogen bonding and the hydrophobic effect played a key role in the formation of Z/T-Cur nanocomplexes, and the interactions were spontaneous and driven by enthalpy. The encapsulation efficiency, loading capacity, and bioavailability increased from 60.8% (Zein-Cur) to 91.7% (Z/T-Cur1:1), from 6.1% (Zein-Cur) to 18.3% (Z/T-Cur1:1), and from 4.7% (Zein-Cur) to 20.0% (Z/T-Cur1:1), respectively. The Z/T-Cur significantly alleviated colitis symptoms in DSS-treated mice. Additionally, the prepared nanocomplexes rebalanced the gut microbiota composition of colitis mice by increasing the abundance of Akkermansia. Odoribacter and Monoglobus were rich in the Z-T-Cur treatment group, and Turicibacter and Bifidobacterium were rich in the zein-TSP treatment group. This study demonstrated that the TSP could be helpful in the targeted drug delivery system.

Physicochemical properties of a novel chestnut porous starch nanoparticle

A novel chestnut porous starch nanoparticle (PSNP) was successfully synthesized, combining the properties of starch nanoparticle (SNP) and porous starch. The SNP obtained through ultrasonic and acid hydrolysis, exhibited a smaller particle size (173.9 nm) and a higher specific surface area (SSA) compared to native starch. After the synergistic hydrolysis by α-amylase and glucoamylase, the porous structure appeared on the surface of SNP. The prepared PSNP had a size of 286.3 nm and the highest SSA. In the adsorption experiments, PSNP showed higher capacities for adsorbing water, oil and methylene blue (MB) compared to other samples. The acid and enzymatic treatments resulted in a decrease in the levels of total starch content and amylose ratio. Furthermore, the treatments increased the levels of relative crystallinity (RC) and solubility, while decreasing the short-range ordered structure and swelling ratio at high temperatures. It was observed that the SSA of starch granules positively correlated with the MB and water adsorption capacity (WAC), solubility, and RC. These findings highlight the potential of the novel PSNP as an efficient adsorbent for bioactive substances and dyes.

Zein-Based Nanoparticles as Active Platforms for Sustainable Applications: Recent Advances and Perspectives

Nanomaterials, due to their unique structural and functional features, are widely investigated for potential applications in a wide range of industrial sectors. In this context, protein-based nanoparticles, given proteins' abundance, non-toxicity, and stability, offer a promising and sustainable methodology for encapsulation and protection, and can be used in engineered nanocarriers that are capable of releasing active compounds on demand. Zein is a plant-based protein extracted from corn, and it is biocompatible, biodegradable, and amphiphilic. Several approaches and technologies are currently involved in zein-based nanoparticle preparation, such as antisolvent precipitation, spray drying, supercritical processes, coacervation, and emulsion procedures. Thanks to their peculiar characteristics, zein-based nanoparticles are widely used as nanocarriers of active compounds in targeted application fields such as drug delivery, bioimaging, or soft tissue engineering, as reported by others. The main goal of this review is to investigate the use of zein-based nanocarriers for different advanced applications including food/food packaging, cosmetics, and agriculture, which are attracting researchers' efforts, and to exploit the future potential development of zein NPs in the field of cultural heritage, which is still relatively unexplored. Moreover, the presented overview focuses on several preparation methods (i.e., antisolvent processes, spry drying), correlating the different analyzed methodologies to NPs' structural and functional properties and their capability to act as carriers of bioactive compounds, both to preserve their activity and to tune their release in specific working conditions.

Enhanced mechanical properties and antibacterial activities of chitosan films through incorporating zein-gallic acid conjugate stabilized cinnamon essential oil Pickering emulsion

In this study, zein-gallic acid covalent complex prepared by alkali treatment was utilized as an emulsifier to stabilize cinnamon essential oil (CEO) Pickering emulsion, and the chitosan-based (CZGE) films loaded with CEO Pickering emulsion were prepared by blending. The influences of different contents of CEO Pickering emulsion on the physical properties and biological activities of CZGE films were investigated. The results showed that Pickering emulsion had good compatibility with chitosan matrix and enhanced the interaction between film-forming matrix polymer. In addition, incorporating with CEO Pickering emulsion (15 %, v/v) significantly improved the mechanical and barrier properties of the films, and also enhanced the light transmittance and thermal stability of the films. Furthermore, the loading of emulsion also improved the antioxidant activities of the films and led to the formation of high antimicrobial property against food pathogens, and the slow-release behavior of CEO could effectively extend the biological activity of the films. These results suggested that Pickering emulsion has potential as a loading system and a plasticizer in active packaging, and the feasibility of CZGE film in food packaging.

Antimicrobial and antioxidant activity of encapsulated tea polyphenols in chitosan/alginate-coated zein nanoparticles: a possible supplement against fish pathogens in aquaculture

Regulation of antibiotic use in aquaculture calls for the emergence of more sustainable alternative treatments. Tea polyphenols (GTE), particularly epigallocatechin gallate (EGCG), have various biological activities. However, tea polyphenols are susceptible to degradation. In this work, EGCG and GTE were encapsulated in zein nanoparticles (ZNP) stabilized with alginate (ALG) and chitosan (CS) to reduce the degradation effect. ALG-coated ZNP and ALG/CS-coated ZNP encapsulating EGCG or GTE were obtained with a hydrodynamic size of less than 300 nm, an absolute ζ-potential value >30 mV, and an encapsulation efficiency greater than 75%. The antioxidant capacity of the encapsulated substances, although lower than that of the free ones, maintained high levels. On the other hand, the evaluation of antimicrobial activity showed greater efficiency in terms of growth inhibition for ALG/CS-ZNP formulations, with average overall values of around 60%, reaching an inhibition of more than 90% for Photobacterium damselae. These results support encapsulation as a good strategy for tea polyphenols, as it allows maintaining significant levels of antioxidant activity and increasing the potential for antimicrobial activity, in addition to increasing protection against sources of degradation.

Polymorphic nanostarch-mediated assembly of bioactives

Starch as an edible, biosafe, and functional biopolymer, has been tailored at nanoscale to deliver bioactive guests. Nanostarches fabricated in various morphologies including nanosphere, nanorod, nanoworm, nanovesicle, nanopolyhedron, nanoflake, nanonetwork etc., enable them to assemble different kinds of bioactives due to structural particularity and green modification. Previous studies have reviewed nanostarch for its preparation and application in food, however, no such work has been done for the potential of delivery system via polymorphic nanostarches. In this review, we focus on the merits of nanostarch empowered by multi-morphology for delivery system, and also conclude the assembly strategies and corresponding properties of nanostarch-based carrier. Additionally, the advantages, limitations, and future perspectives of polymorphic nanostarch are summarized to better understand the micro/nanostarch architectures and their regulation for the compatibility of bioactive molecules. According to the morphology of carrier, nanostarch effectively captures bioactives on the surface and/or inside core to form tight complexes, which maintains their stability in the human microenvironment. It improves the bioavailability of bioactive guests by different assembly approaches of carrier/guest surface combination, guest@carrier embedment, and nanostarch-mediated encapsulation. Targeted release of delivery systems is stimulated by the microenvironment conditions based on the complex structure of nanostarch loaded with bioactives.

Preparation and characterization of particle-filled microgels by chemical cross-linking based on zein and carboxymethyl starch for delivering the quercetin

This work aimed to develop novel particle-filled microgels based on zein and carboxymethyl starch for delivering quercetin (Que). The anti-solvent precipitation and chemical cross-linking methods were combined to produce the zein-carboxymethyl starch particle-filled microgels (SM-Z). The critical finding of the study was that adding zein nanoparticles significantly improved the strength, water holding capacity, and thermal stability of carboxymethyl starch microgel (SM). Besides, SM-Z had good biodegradability, and the particle size was about 44-61 μm. SM-Z successfully encapsulated Que with a high encapsulation efficiency of 86.7 %. Que-loaded SM-Z (Q/SM-Z) significantly enhanced 30 d storage and UV light stability (up to 89.4 % retention rate) of Que than the Que-loaded SM (Q/SM). Q/SM-Z exhibited pH-responsive swelling behavior, and the swelling was greatest in the simulated intestinal fluid (pH = 7). Besides, the Q/SM-Z showed good stability in simulated gastric fluids and sustained release of Que in simulated intestinal fluids, 72.5 % Que was released at 8 h. During Que transport in Caco-2 cell monolayers, Q/SM (5.8 %) and Q/SM-Z (9.7 %) were significantly higher than free Que (1.93 %). Therefore, as an oral delivery system for hydrophobic active substances, SM-Z possesses good biodegradability and pH-responsive intestinal-targeted delivery capability, providing a new strategy for designing starch-based encapsulation materials.

Post pH-driven encapsulation of polyphenols in next-generation foods: principles, formation and applications

To meet the needs of a growing global population (∼10 billion by 2050), there is an urgent demand for sustainable, healthy, delicious, and affordable next-generation foods. Natural polyphenols, which are abundant in edible plants, have emerged as promising food additives due to their potential health benefits. However, incorporating polyphenols into food products presents various challenges, including issues related to crystallization, low water-solubility, limited bioavailability, and chemical instability. pH-driven or pH-shifting approaches have been proposed to incorporate polyphenols into the delivery systems. Nevertheless, it is unclear whether they can be generally used for the encapsulation of polyphenols into next-generation foods. Here, we highlight a post pH-driven (PPD) approach as a viable solution. The PPD approach inherits several advantages, such as simplicity, speed, and environmental friendliness, as it eliminates the need for heat, organic solvents, and complex equipment. Moreover, the PPD approach can be widely applied to different polyphenols and food systems, enhancing its versatility while also potentially contributing to reducing food waste. This review article aims to accelerate the implementation of the PPD approach in the development of polyphenol-fortified next-generation foods by providing a comprehensive understanding of its fundamental principles, encapsulation techniques, and potential applications in plant-based foods.

The potential of curcumin-based co-delivery systems for applications in the food industry: Food preservation, freshness monitoring, and functional food

Currently, curcumin-based co-delivery systems are receiving widespread attention. However, a systematic summary of the possibility of curcumin-based co-delivery systems used for the food industry from multiple directions based on the functional characteristics of curcumin is lacking. This review details the different forms of curcumin-based co-delivery systems including the single system of nanoparticle, liposome, double emulsion, and multiple systems composed of different hydrocolloids. The structural composition, stability, encapsulation efficiency, and protective effects of these forms are discussed comprehensively. The functional characteristics of curcumin-based co-delivery systems are summarized, involving biological activity (antimicrobial and antioxidant), pH-responsive discoloration, and bioaccessibility/bioavailability. Correspondingly, potential applications for food preservation, freshness detection, and functional foods are introduced. In the future, more novel co-delivery systems for active ingredients and food matrices should be developed. Besides, the synergistic mechanisms between active ingredients, delivery carrier/active ingredient, and external physical condition/active ingredient should be explored. In conclusion, curcumin-based co-delivery systems have the potential to be widely used in the food industry.

Physicochemical stability, antioxidant activity, and antimicrobial activity of quercetin-loaded zein nanoparticles coated with dextrin-modified anionic polysaccharides

Core-shell biopolymer nanoparticles are assembled from a hydrophobic protein (zein) core and a hydrophilic polysaccharide (carboxymethyl dextrin) shell. The nanoparticles were shown to have good stability and the ability to protect quercetin from chemical degradation under long-term storage, pasteurization, and UV irradiation. Spectroscopy analysis shows that electrostatic, hydrogen bonding, and hydrophobic interactions are the main driving forces for the formation of composite nanoparticles. Quercetin coated with nanoparticles significantly enhanced its antioxidant and antibacterial activities and showed good stability and slow release in vitro during simulated gastrointestinal digestion. Furthermore, the encapsulation efficiency of carboxymethyl dextrin-coated zein nanoparticles (81.2%) for quercetin was significantly improved compared with that of zein nanoparticles alone (58.4%). These results indicate that carboxymethyl dextrin-coated zein nanoparticles can significantly improve the bioavailability of hydrophobic nutrient molecules such as quercetin and provide a valuable reference for their application in the field of biological delivery of energy drinks and food.

Co-encapsulation of curcumin and quercetin with zein/HP-β-CD conjugates to enhance environmental resistance and antioxidant activity

In this study, composite nanoparticles consisting of zein and hydroxypropyl beta-cyclodextrin were prepared using a combined antisolvent co-precipitation/electrostatic interaction method. The effects of calcium ion concentration on the stability of the composite nanoparticles containing both curcumin and quercetin were investigated. Moreover, the stability and bioactivity of the quercetin and curcumin were characterized before and after encapsulation. Fluorescence spectroscopy, Fourier Transform infrared spectroscopy, and X-ray diffraction analyses indicated that electrostatic interactions, hydrogen bonding, and hydrophobic interactions were the main driving forces for the formation of the composite nanoparticles. The addition of calcium ions promoted crosslinking of the proteins and affected the stability of the protein-cyclodextrin composite particles through electrostatic screening and binding effects. The addition of calcium ions to the composite particles improved the encapsulation efficiency, antioxidant activity, and stability of the curcumin and quercetin. However, there was an optimum calcium ion concentration (2.0 mM) that provided the best encapsulation and protective effects on the nutraceuticals. The calcium crosslinked composite particles were shown to maintain good stability under different pH and simulated gastrointestinal digestion conditions. These results suggest that zein-cyclodextrin composite nanoparticles may be useful plant-based colloidal delivery systems for hydrophobic bio-active agents.

A review of food preservation based on zein: The perspective from application types of coating and film

The application of zein in food preservation was discussed from a unique perspective of application types, including coating and film. For the study of coating, edibility is considered because the coating adheres to the surface of food directly. For the study of film, plasticizers improve their mechanical properties, while barrier performance and antibacterial performance are achieved by nanoparticles; the incorporation of polyphenols is mainly due to their antibacterial and antioxidant properties; other biopolymers realize the complementarity between zein and biopolymers within films. In the future, the interaction between the edible coating and food matrix needs to be concerned. The mechanism of various exogenous additives and zein in the film should be noticed. Importantly, food safety and the possibility of large-scale application should be followed. Additionally, the intelligent response is one of the key development directions of zein-based film in the future.

Structural modification of zein-based oil-in-glycerol emulsion gels for improved textural and digestion behaviors

Zein can dissolve in glycerol, and can be developed into oil-in-glycerol emulsion gels to widen its applications. The current study focused on modulating the structures of zein-based emulsion gels by the addition of a surface active ingredient (Span 20, SP) to improve textural and digestion behaviors. Microstructural observation indicated that the addition of SP replaced zein from the oil-glycerol interface, and allowed a higher level of oil droplet aggregation. After adding SP, the gel hardness decreased from 3.43 ± 0.14 N to 1.62 ± 0.01 N, and the storage modulus also decreased with the increase of SP content. Viscoelasticity of the gels was thermo-responsive, and the presence of SP contributed to a higher recovery of the storage modulus after the heating-cooling process. The addition of SP reduced the oil-binding capacity of zein gel from 97.61 ± 0.19% to 82.00 ± 0.92% and the solvent-binding capacity from 75.97 ± 3.05% to 62.25 ± 0.22%, indicating that the zein network was weakened. Then, gels were mixed with simulated digestive juices to track the changes of gel structures and the release of free fatty acids. The addition of SP accelerated the digestion process, especially intestinal digestion. SP contributed to a higher fluorescence intensity in the digesta, which was a sign of a higher level of digestion of zein. Subsequently, the addition of SP increased the release content of free fatty acids from 4.27 ± 0.71% to 5.07 ± 1.27%. The above findings would be useful in designing zein-based functional food products with favored textural and digestion properties.

Oral bioavailability of bioactive compounds; modulating factors, in vitro analysis methods, and enhancing strategies

Foods are complex biosystems made up of a wide variety of compounds. Some of them, such as nutrients and bioactive compounds (bioactives), contribute to supporting body functions and bring important health benefits; others, such as food additives, are involved in processing techniques and contribute to improving sensory attributes and ensuring food safety. Also, there are antinutrients in foods that affect food bioefficiency and contaminants that increase the risk of toxicity. The bioefficiency of food is evaluated with bioavailability which represents the amount of nutrients or bioactives from the consumed food reaching the organs and tissues where they exert their biological activity. Oral bioavailability is the result of some physicochemical and biological processes in which food is involved such as liberation, absorption, distribution, metabolism, and elimination (LADME). In this paper, a general presentation of the factors influencing oral bioavailability of nutrients and bioactives as well as the in vitro techniques for evaluating bioaccessibility and is provided. In this context, a critical analysis of the effects of physiological factors related to the characteristics of the gastrointestinal tract (GIT) on oral bioavailability is discussed, such as pH, chemical composition, volumes of gastrointestinal (GI) fluids, transit time, enzymatic activity, mechanical processes, and so on, and the pharmacokinetics factors including BAC and solubility of bioactives, their transport across the cell membrane, their biodistribution and metabolism. The impact of matrix and food processing on the BAC of bioactives is also explained. The researchers' recent concerns for improving oral bioavailability of nutrients and food bioactives using both traditional techniques, for example, thermal treatments, mechanical processes, soaking, germination and fermentation, as well as food nanotechnologies, such as loading of bioactives in different colloidal delivery systems (CDSs), is also highlighted.

Bacterial outer membrane vesicles-cloaked modified zein nanoparticles for oral delivery of paclitaxel

To improve the aqueous solubility and oral bioavailability of paclitaxel (PTX), a biomimetic system for oral administration of PTX was efficiently developed as an outer membrane vesicle (OMVs) of sodium caseinate (CAS) modified zein nanoparticles (OMVs-Zein-CAS-PTX-NPs) by Escherichia coli. To verify their structure and properties, the designed nanostructures were thoroughly characterized using various characterization techniques. The results indicated that hydrogen bonds and van der Waals forces mainly drove the interaction between PTX and Zein, but the complex is unstable. The physicochemical stability of PTX-loaded zein nanoparticles was improved by the addition of CAS. The biological characteristics of biofilms are reproduced by nanoparticles cloaked with outer membrane vesicles. OMVs-Zein-CAS-PTX-NPs delayed the release of PTX under simulated gastric and intestinal fluids due to OMVs protection. OMVs-Zein-CAS-PTX-NPs exhibited remarkable antitumor ability in vitro and improved the bioavailability of oral administration of PTX in vivo. Therefore, OMVs cloaked in nanoparticles may be a suitable delivery vehicle to provide an efficient application prospect for the oral administration of PTX.

pH Effect on the Structure, Rheology, and Electrospinning of Maize Zein

As a simple and convenient technology to fabricate micron-to-nanoscale fibers with controllable structure, electrostatic spinning has produced fiber films with many natural advantages, including a large specific surface area and high porosity. Maize zein, as a major storage protein in corn, showed high hydrophobicity and has been successfully applied as a promising carrier for encapsulation and controlled release in the pharmaceutical and food areas. Proteins exhibit different physical and chemical properties at different pH values, and it is worth investigating whether this change in physical and chemical properties affects the properties of electrospun fiber films. We studied the pH effects on zein solution rheology, fiber morphology, and film properties. Rotational rheometers were used to test the rheology of the solutions and establish a correlation between solution concentration and fiber morphology. The critical concentrations calculated by the cross-equation fitting model were 17.6%, 20.1%, 20.1%, 17.1%, and 19.5% (w/v) for pH 4, 5, 6, 7, and 8, respectively. The secondary structure of zein changed with the variation in solution pH. Furthermore, we analyzed the physical properties of the zein films. The contact angles of the fiber membranes prepared with different pH spinning solutions were all above 100, while zein films formed by solvent evaporation showed hydrophilic properties. The results indicated that the rheological properties of zein solutions and the surface properties of the film were affected by the pH value. This study showed that zein solutions can be stabilized to form electrospun fibers at a variety of pH levels and offered new opportunities to further enhance the encapsulation activity of zein films for bioactive materials.

Fabrication, characterization, and lipid-lowering effects of naringenin-zein-sodium caseinate-galactosylated chitosan nanoparticles

Naringenin is a natural flavonoid that is widely distributed in citrus fruits and pharmacologically demonstrated to licit lipid-lowering activity. However, the clinical relevance of naringenin is limited due to its poor water solubility and inefficient absorption. In this study, we designed and developed naringenin-zein-sodium caseinate-galactosylated chitosan nanoparticles (GC-NPs) for hepatocyte-specific targeting, with naringenin-zein-sodium caseinate-chitosan nanoparticles (CS-NPs) as a control. Electrostatic adsorption was the primary binding mode in the GC-NPs and CS-NPs. Moreover, the particle size and zeta potential of GC-NPs were larger than those of CS-NPs and both types of nanoparticles had similar encapsulation rates. In vitro study experiments demonstrated that GC-NPs aggregated inside and outside of the cell membrane and significantly inhibited total triglyceride and cholesterol levels in oleic acid-induced HepG2 cells (p < 0.05). In high-fat diet-fed C57BL/6J mice, GC-NPs administration visibly improved the body weight, total cholesterol, and triglyceride content in the serum and liver, and high-density lipoprotein cholesterol levels improved, which corresponded to liver histological results. Additionally, in vitro and in vivo assays demonstrated that GC-NPs exhibited higher lipid-lowering activity than CS-NPs and naringenin monomers. These results suggest that GC-NPs are effective for oral delivery of naringenin in lipid-lowering therapies.

Development of carboxymethyl chitosan-coated zein/soy lecithin nanoparticles for the delivery of resveratrol

The objective of this work is to formulate a zein-based nanocomposite for the delivery of natural polyphenols. A proprietary atomizing/antisolvent precipitation (AAP) process was used to prepare carboxymethyl chitosan (CMC)-coated zein/soy lecithin (SL) nanoparticles (ZLC NPs). At a suitable mass ratio of zein/SL/CMC (100 : 30 : 30), ZLC NPs with desirable redispersibility and physicochemical stability were successfully fabricated. After that, resveratrol (Res) as the representative natural polyphenol was encapsulated in ZLC NPs. The optimized Res/ZLC NPs exhibited a spherical morphology, small size (259.43 ± 2.47 nm), large zeta potential (-47.7 ± 0.66 mV), and high encapsulation efficiency (91.32 ± 4.01%) and loading capacity (5.27 ± 0.35%). Further characterization indicated that Res was encapsulated in the hydrophobic core of the ZLC matrix in an amorphous state. Compared to free Res, Res/ZLC NPs showed a 2.55-fold increase in the Res dissolution rate, a 2.27-fold increase in bioaccessibility, and a 1.69-fold increase in ABTS˙⁺ scavenging activity. Also, Res/ZLC NPs showed a higher Res retention rate (>68.0%) than free Res (<35.0%) over 45 days of storage. Therefore, ZLC NPs have promising potential as vehicles for natural polyphenols.

Zein-based nanoparticles: Preparation, characterization, and pharmaceutical application

Zein, as one of the natural and GRAS proteins in plant, is renewable, nontoxic, biocompatible and biodegradable. Over the past decade, many research efforts have been devoted to zein-based biomaterials for several industrial applications. Combining with research experiences in our research group, the preparation methods, characterizations and pharmaceutical applications of zein-based nanoparticles were summarized in this review. Zein NPs with different particle nanostructures have been prepared by chemical crosslinking, desolvating, dispersing and micromixing strategies. The pharmaceutical applications of zein NPs are mainly focus on the drug delivery. Zein NPs can improve the drug stability, increase the oral bioavailability, control the drug release and enhance the drug targeting, thereby improving the pharmaceutical effect effectively. More efforts are required to analyze the relationship among preparation methods, particle nanostructures and pharmaceutical properties in virtue of quality by design approach, and further promote the scale-up production and clinical application of zein NPs.

Combined chemotherapy based on bioactive black phosphorus for pancreatic cancer therapy

Pancreatic cancer is the most aggressive malignant tumor with difficulty in early diagnosis, very short survival time in advanced stage, and lack of effective treatment options. In this work, a novel combination chemotherapy strategy based on bioactive black phosphorus (BP) and gemcitabine (GEM) is developed for efficient treatment of pancreatic cancer. The combined cell cycle blockage in G2/M phase induced by BP and G0/G1 phase by GEM results in synergistic killing of pancreatic cancer cells with the combination index (CI) < 1. The iRGD modified zein nanoparticles co-loaded with BP quantum dots (BPQDs) and GEM are designed and prepared as a targeted nanoplatform (BP-GEM@NPs). After intravenous injection, the in vivo distribution and pharmacokinetics results demonstrate that BP-GEM@NPs shows excellent tumor targeting capability and significantly prolonged blood circulation time. The targeted co-delivery of BPQDs and GEM induces much more pancreatic tumor cell apoptosis and synergistically inhibits tumor growth in both subcutaneous xenograft and orthotopic models. Meanwhile, BP-GEM@NPs exhibit good biocompatibility without bring adverse effects. This work indicates the great potential of BP-GEM@NPs as a combination chemotherapy for pancreatic cancer and provides insights into development of biomedicine by exploring the intrinsic bioactivities of nanomaterials.

Nano-Sized Fucoidan Interpolyelectrolyte Complexes: Recent Advances in Design and Prospects for Biomedical Applications

The marine polysaccharide fucoidan (FUC) is a promising polymer for pharmaceutical research and development of novel drug delivery systems with modified release and targeted delivery. The presence of a sulfate group in the polysaccharide makes FUC an excellent candidate for the formation of interpolyelectrolyte complexes (PECs) with various polycations. However, due to the structural diversity of FUC, the design of FUC-based nanoformulations is challenging. This review describes the main strategies for the use of FUC-based PECs to develop drug delivery systems with improved biopharmaceutical properties, including nanocarriers in the form of FUC-chitosan PECs for pH-sensitive oral delivery, targeted delivery systems, and polymeric nanoparticles for improved hydrophobic drug delivery (e.g., FUC-zein PECs, core-shell structures obtained by the layer-by-layer self-assembly method, and self-assembled hydrophobically modified FUC particles). The importance of a complex study of the FUC structure, and the formation process of PECs based on it for obtaining reproducible polymeric nanoformulations with the desired properties, is also discussed.

Efficient Utilization of Tea Resources through Encapsulation: Dual Perspectives from Core Material to Wall Material

With the high production and consumption of tea around the world, efficient utilization of tea byproducts (tea pruning, tea residues after production, and drinking) is the focus of improving the economy of the tea industry. This review comprehensively discusses the efficient utilization of tea resources by encapsulation from the dual perspectives of core material and wall material. The core material is mainly tea polyphenols, followed by tea oils. The encapsulation system for tea polyphenols includes microcapsules, nanoparticles, emulsions, gels, conjugates, metal-organic frameworks, liposomes, and nanofibers. In addition, it is also diversified for the encapsulation of tea oils. Tea resources as wall materials refer to tea saponins, tea polyphenols, tea proteins, and tea polysaccharides. The application of the tea-based delivery system widely involves functionally fortified food, meat preservation, film, medical treatment, wastewater treatment, and plant protection. In the future, the coencapsulation of tea resources as core materials and other functional ingredients, the precise targeting of these tea resources, and the wide application of tea resources in wall materials need to be focused on. In conclusion, the described technofunctional properties and future research challenges in this review should be followed.

Salicylic acid functionalized zein for improving plant stress resistance and as a nanopesticide carrier with enhanced anti-photolysis ability

BACKGROUND

There is a serious global problem of salinization of arable land, causing large reduction in world food production. Use of plant hormones is an effective way to reduce damage caused to crops and salt stress.

RESULTS

In this study, PEI-EDA was modified with AM-zein and grafted with plant hormone SA (AM-zein-SA) and used as a nano-pesticide carrier to load emamectin benzoate (EB). The use of AM-zein-SA as a nano-pesticide carrier could reduce the damage caused by salt stress to crops. The structure of AM-zein-SA was characterized by FTIR, UV, fluorescence, Raman, and ¹H NMR spectroscopic techniques. AM-zein-SA could effectively improve the resistance of EB to ultraviolet radiations, resistance of cucumber to salt stress, and the absorption of EB by plants. The experimental results showed that AM-zein-SA could effectively improve the anti-UV property of EB by 0.88 fold. When treated with 120 mmol NaCl, the germination rate of cucumber seeds under salt stress increased by 0.93 fold in presence of 6.25 mg/L carrier concentration. The POD and SOD activities increased by 0.50 and 1.21 fold, whereas the content of MDA decreased by 0.23 fold. In conclusion, AM-zein-SA nano-pesticide carrier could be used to improve the salt resistance of crops and the adhesion of pesticides to leaves.

CONCLUSION

AM-zein-SA, without undergoing any changes in its insecticidal activity, could simultaneously improve the salt stress resistance and salt stress germination rate of cucumber, reduce growth inhibition due to stress under high-concentration salt, and had a good effect on crops. In addition, EB@AM-zein-SA obviously improved the upward transmission rate of EB, as compared with EB. In this study, SA was grafted onto zein-based nano-pesticide carrier, which provided a green strategy to control plant diseases, insects, and pests while reducing salt stress on crops in saline-alkali soil.

Delivery of curcumin by shellac encapsulation: Stability, bioaccessibility, freeze-dried redispersibility, and solubilization

•

Shellac can nano-encapsulate curcumin by pH cycle.

•

The starting point of the design is economy, simplicity, energy saving and safety.

•

High loading capacity of curcumin is the unique advantage of shellac nanoparticles.

•

The nanoparticles had good physicochemical stability and bioaccessibility.

•

The redispersibility is proportional to the mass ratio of shellac-to-curcumin.

Curcumin is an active ingredient with multiple functions, however, its application is limited by its low stability, bioaccessibility, freeze-dried redispersibility, and solubilization. The work aims to improve the application of curcumin (Cur) by encapsulation. Shellac was the wall material inspired by its pH-dependent deprotonation and amphiphilic nature to form nanoparticles. The curcumin/shellac nanoparticles (S/Cur) exhibited a bright spot of high loading capacity (the maximum of higher than 70 %), while still having high encapsulation efficiency (the minimum of higher than 85 %). Transmission electron microscopy showed that S/Cur was a spherical structure. It exhibited good physical stability, including pH (4.0–8.0), ionic strength (NaCl, < 900 mM), thermo stability (80 ℃, 180 min), and storage stability (light and dark, 4 and 25 ℃, 20 days). Meanwhile, the chemical stability was increased by encapsulation. Furthermore, the bioaccessibility of Cur was improved to 75.95 %, which is attributed to the pH response of shellac. Additionally, S/Cur had freeze-dried redispersibility and solubilization, which is proportional to the mass ratio of shellac-to-Cur. The mechanism of S/Cur formation involved hydrophobic interaction and hydrogen bonds, and the nanoconfined Cur was amorphous.

Self-assembled zein organogels as in situ forming implant drug delivery system and 3D printing ink

Recently, biomedical applications of organogels have been increasing; however, there is a demand for bio-based polymers. Here, we report self-assembled zein organogels in N-methyl pyrrolidone (NMP), Dimethyl sulfoxide (DMSO), and glycerol formal (GF). The gel formation was driven by the solvent's polarity and the hydrogen bonding component of Hansen Solubility Parameters was important in promoting gelation. Gels exhibited shear-thinning and thixotropic properties. Furthermore, water-induced self-assembly of zein allows mechanically robust in situ implant formation by solvent exchange. Ciprofloxacin was incorporated as a model drug and sustained release depending upon the solvent exchange rate was observed. In situ implants in agarose gel retained antibacterial efficacy against S. aureus for more than 14 days. Zein-based organogels were further applied as 3D printing ink and it was found that zein gel in DMSO had superior printability than gels prepared in NMP and GF. Using three solvents to prepare organogels can enable the encapsulation of various drugs and facilitate the preparation of composite gels with other biocompatible polymers. These organogel systems can further be used for developing 3D printed drug delivery systems or scaffolds for tissue engineering.

Improved paclitaxel delivery with PEG-b-PLA/zein nanoparticles prepared via flash nanoprecipitation

Polymeric micelle is a promising vehicle to improve the bioavailability and clinical outcomes of paclitaxel (PTX) which has been proven effective in the treatment of a wide range of cancers. However, conventional PTX formulation with the amphiphilic PEG-b-PLA usually suffers from insufficient PTX loading, low stability of PTX-micelles, and rapid PTX release due to low compatibility between PTX and PLA, limiting its clinical application. In this study, a novel nanoparticle platform was developed to improve the stability of PTX-loaded nanoparticles (NPs) and the delivery efficacy of PTX by integrating the flash nanoprecipitation (FNP) technique and a combination of amphiphilic PEG-PLA and super hydrophobic zein. The incorporation of zein led to the formation of distinct hydrophobic interiors of NPs which enhanced the interaction between PTX and NPs, therefore improving the encapsulation efficiency of PTX and sustained drug release compared with PEG-PLA micelles without zein. In addition, FNP allowed facile fabrication of PTX-NPs with smaller sizes and higher stability. These PTX-NPs showed superior sustained release of PTX and good cancer cell-killing in vitro. Among them, PTX-5k-16k-1Z NPs exhibited excellent biosafety and anti-tumor efficacy in a xenograft tumor model in mice, suggesting great potential in the delivery of hydrophobic drugs for cancer therapy.

New Perspective on Natural Plant Protein-Based Nanocarriers for Bioactive Ingredients Delivery

The health effects of bioactive substances in the human body are affected by several factors, including food processing conditions, storage conditions, light and heat, among others. These factors greatly limit the stability and bioavailability of bioactive substances. These problems can be solved by a novel protein-based nanocarrier technology, which has the excellent potential to enhance solubility, bioavailability, and the controlled release of bioactive substances. In addition, plant protein has the advantages of economy, environmental protection, and high nutrition compared to animal protein. In this review, the preparation, characterization, and application of plant protein-based nanocarriers are summarized. The research deficiency and future prospects of plant protein nanocarriers are emphasized.

A review of factors affecting the stability of zein-based nanoparticles loaded with bioactive compounds: from construction to application

Zein-based nanoparticles loaded with bioactive compounds have positive prospects in the food industry, but an important limiting factor for development is colloidal instability. Currently, extensive researches are focused on solving the instability of zein nanoparticles, but since the beginning of the studies, there has not been a summary of the factors affecting the stability of zein-based nanoparticles. In the present work, the factors were reviewed comprehensively from the perspective of carrier construction and application evaluation. The former mainly includes type, quantity, and characteristics of biopolymer, the mass ratio of biopolymer/bioactive compound to zein, blending sequence of biopolymer, and location of encapsulated bioactive compounds. The latter mainly includes pH, heating, ionic strength, storage, freeze-drying, and gastrointestinal digestion. The former is the prerequisite for the success of the latter. The challenge is that stability research is limited to the laboratory level, and it is difficult to ensure that the stability results are suitable for commercial food matrices due to their complexity. At the laboratory level, the future trends are the influence of external energy and the cross-complexity and uniformity of stability research. The review is expected to provide systematic understanding and guidance for the development of zein-based nanoparticles stability.