Epidermal-skin-test 1000 (EST-1000)—A new reconstructed epidermis for in vitro skin corrosivity testing

Human relevance of in vivo and in vitro skin irritation tests for hazard classification of pesticides

Background: Test methods to inform hazard characterization and labeling of pesticides to protect human health are typically conducted using laboratory animals, and for skin irritation/corrosion the rabbit Draize test is currently required by many regulatory agencies. Although the Draize test is generally regarded to provide protective classifications for human health, new approach methodologies (NAMs) have been developed that offer more human relevant models that circumvent the uncertainty associated with species differences that exist between rabbits and humans. Despite wide applicability and use of these test methods across a broad range of chemicals, they have not been widely adopted for testing pesticides and pesticidal formulations. One of the barriers to adoption of these methods in this sector is low concordance with results from the Draize rabbit test, particularly for chemicals within the mild to moderate irritation spectrum.

Methods: This review compares and contrasts the extent to which available models used in skin irritation testing mimic the anatomy and physiology of human skin, and how each aligns with the known key events leading to chemically-induced adverse skin irritation and corrosion. Doing so fully characterizes the human relevance of each method.

Results: As alternatives to the rabbit Draize test, several protocols using ex vivo, in chemico, and in vitro skin models are available as internationally harmonized test guidelines. These methods rely on a variety of models of human skin, including excised rodent skin, synthetic biochemical models of barrier function, cell culture systems, and reconstructed human tissue models. We find these models exhibit biological and mechanistic relevance aligned with human skin irritation responses. Further, recent retrospective analyses have shown that the reproducibility of the Draize test is less than 50% for mild and moderate responses, with many of the replicate predictions spanning more than one category (e.g., a moderate response reported in one study followed by a non-irritant response reported in another study).

Conclusions: Based on this comparative evaluation, we recommend top-down and bottom-up testing strategies that use the most human relevant in vitro test methods for skin irritation and corrosion classification of pesticides and pesticide formulations. To further discriminate among mild and non-irritant formulations, optimization of a cytokine release protocol and subsequent analyses of reference formulation test results is recommended.

Evaluating the QileX-RhE skin corrosion test for chemical subcategorization in accordance with OECD TG 431

Skin corrosion testing is integral to evaluating the potential harm posed by chemicals, impacting regulatory decisions on safety, transportation, and labeling. Traditional animal testing methods are giving way to in vitro alternatives, such as reconstructed human epidermis (RhE) models, aligning with evolving ethical standards. This study evaluates the QileX-RhE test system's performance for chemical subcategorization within the OECD TG 431 framework. Results demonstrate its ability to differentiate subcategories, accurately predicting 83% of UN GHS Category 1A and 73% of UN GHS Category 1B/1C chemicals with 100% sensitivity in corrosive prediction. Additionally, this study provides a comprehensive assessment of the test method's performance by employing nuanced parameters such as positive predictive value (PPV), negative predictive value (NPV), post-test odds and likelihood rations, offering valuable insights into the applicability and effectiveness of the QileX-RhE test method.

The Reconstructed Human Epidermis in vitro — a Model for Basic and Applied Research of Human Skin

Background. The reconstructed human epidermis (RE) is an in vitro tissue-engineering construct similar to the native epidermis. Objective. To develop a full-layer RE. Describe its structure: determine the presence of all layers of the epidermal component, including basal, spinous and granular layers and stratum corneum of the epidermis; detect the basement membrane, the border between the epidermal and mesenchymal component. Materials and methods. Isolation of keratinocytes and fibroblasts from human donor skin. Cultivation of keratinocytes and fibroblasts in vitro under 2D conditions, cell subculturing and 3D modeling of RE, obtaining cryosections, histological staining, immunohistochemical (IHC) study with antibodies to cytokeratins 14 and 10, Ki67 protein, loricrin, laminin 5 and plectin. Results. A technique was developed for the formation of RE. Histological examination showed that the stratification of keratinocyte layers occurs during the formation of RE. Layers are formed including basal, spinous and granular layers and stratum corneum. The IHC study has shown the proliferative activity of keratinocytes of the basal layer and has detected the presence of marker proteins of keratinocytes at different stages of differentiation. RE basal keratinocytes, like native ones, form hemidesmosomes and synthesize basement membrane proteins. Conclusions. A full-layer human RE was obtained in vitro. RE meets all the characteristics of the native epidermis and it is suitable for basic and practical research in the field of skin biology, dermatology, and cosmetology.

The Delivery of α1-Antitrypsin Therapy Through Transepidermal Route: Worthwhile to Explore

Human α1-antitrypsin (AAT) is an abundant acute phase glycoprotein expressing anti-protease and immunomodulatory activities, and is used as a biopharmaceutical to treat patients with inherited AAT deficiency. The pleiotropic properties of AAT provide a rationale for using this therapy outside of inherited AAT deficiency. Therapy with AAT is administrated intravenously, yet the alternative routes are being considered. To examine the putative transepidermal application of AAT we used epiCS®, the 3D human epidermis equivalents reconstructed from human primary epidermal keratinocytes. We topically applied various concentrations of AAT protein with a constant volume of 50 µl, prepared in Hank's balance solution, HBSS, to epiCS cultured under bas\al condition or when culture medium supplemented with 100 µg/ml of a combined bacterial lipopolysaccharide (LPS) and peptidoglycan (PGN) mixture. AAT freely diffused across epidermis layers in a concentration and time-dependent manner. Within 18 h topically provided 0.2 mg AAT penetrated well the stratum corneum and localizes within the keratinocytes. The treatments with AAT did not induce obvious morphological changes and damages in keratinocyte layers. As expected, LPS/PGN triggered a strong pro-inflammatory activation of epiCS. AAT exhibited a limited capacity to neutralize the effect of LPS/PGN, but more importantly, it lowered expression of IL-18 and IL-8, and preserved levels of filaggrin, a key protein for maintaining the epidermal barrier integrity. Our findings suggest that the transepidermal route for delivering AAT is worthwhile to explore further. If successful, this approach may offer an easy-to-use therapy with AAT for skin inflammatory diseases.

Development of an in-house reconstructed human epidermis model as an alternative method in skin corrosion assessment

Defining the corrosive properties of chemical products generally involves the use of animal models for human health safety assessment. However, a few alternatives to animal experimentation are currently internationally accepted in order to reduce animal suffering. One of these alternatives makes use of in vitro reconstructed human epidermis (RhE) models and predicts corrosive potential based on the evaluation of cell viability after topical exposure. These models rely on its similarity to human skin, both functional and histological, and are currently worldwide marketed by a few private companies. In this manuscript, we describe the fundamentals of the production of a Do It Yourself (DIY) RhE model, and the operating procedures for the assessment of skin corrosion based on the guidelines proposed for the development of new alternative methods for skin corrosion. Our results indicate that the DIY-RhE model resembles the anatomy of the normal human epidermis as seen by immunohistochemical analysis. Moreover, barrier properties of DIY-RhE were assessed by the measure of Transepithelial Electrical Resistance. Applicability of DIY-RhE for the assessment of skin corrosion was evaluated by measuring cell viability after topical exposure of twelve reference chemicals for 3 and 60 min. Predictive performance resulted in 100% sensitivity, 100% specificity and 100% accuracy matching current requirements for new RhE models proposed for the discrimination of corrosives and non-corrosives.

Current Strategies and Future Perspectives of Skin-on-a-Chip Platforms: Innovations, Technical Challenges and Commercial Outlook

The skin is the largest and most exposed organ in the human body. Not only it is involved in numerous biological processes essential for life but also it represents a significant endpoint for the application of pharmaceuticals. The area of in vitro skin tissue engineering has been progressing extensively in recent years. Advanced in vitro human skin models strongly impact the discovery of new drugs thanks to the enhanced screening efficiency and reliability. Nowadays, animal models are largely employed at the preclinical stage of new pharmaceutical compounds development for both risk assessment evaluation and pharmacokinetic studies. On the other hand, animal models often insufficiently foresee the human reaction due to the variations in skin immunity and physiology. Skin-on-chips devices offer innovative and state-of-the-art platforms essential to overcome these limitations. In the present review, we focus on the contribution of skin-on-chip platforms in fundamental research and applied medical research. In addition, we also highlighted the technical and practical difficulties that must be overcome to enhance skin-on-chip platforms, e.g. embedding electrical measurements, for improved modeling of human diseases as well as of new drug discovery and development.

Engineered Skin Tissue Equivalents for Product Evaluation and Therapeutic Applications

The current status of skin tissue equivalents that have emerged as relevant tools in commercial and therapeutic product development applications is reviewed. Due to the rise of animal welfare concerns, numerous companies have designed skin model alternatives to assess the efficacy of pharmaceutical, skincare, and cosmetic products in an in vitro setting, decreasing the dependency on such methods. Skin models have also made an impact in determining the root causes of skin diseases. When designing a skin model, there are various chemical and physical considerations that need to be considered to produce a biomimetic design. This includes designing a structure that mimics the structural characteristics and mechanical strength needed for tribological property measurement and toxicological testing. Recently, various commercial products have made significant progress towards achieving a native skin alternative. Further research involve the development of a functional bilayered model that mimics the constituent properties of the native epidermis and dermis. In this article, the skin models are divided into three categories: in vitro epidermal skin equivalents, in vitro full-thickness skin equivalents, and clinical skin equivalents. A description of skin model characteristics, testing methods, applications, and potential improvements is presented.

Skin toxicology and 3Rs-Current challenges for public health protection

Driven by the fast paced development of complex test systems in vitro, mass spectrometry and omics, we finally have the tools to unravel the molecular events that underlie toxicological adversity. Yet, timely regulatory adaptation of these new tools continues to pose major challenges even for organs readily accessible such as skin. The reasons for this encompass a need for conservatism as well as the need of tests to serve an existing regulatory framework rather than to produce scientific knowledge. It is important to be aware of this in order to align regulatory skin toxicity with the 3R principles more readily. While most chemical safety testing is still based on animal data, regulatory frameworks have seen a strong push towards non-animal approaches. The endpoints corrosion, irritation, sensitisation, absorption and phototoxicity, for example, can now be covered in vitro with the corresponding test guidelines (TGs) being made available by the OECD. However, in vitro approaches tend to be more reductionist. Hence, a combination of several tests is usually preferable to achieve satisfying predictivity. Moreover, the test systems and their combined use need to be standardised and are therefore subject not only to validation but also to the ongoing development of so-called integrated approaches to testing and assessment (IATAs). Concomitantly, skin models are being refined to deliver the complexity required for increased applicability and predictivity. Given the importance of regulatory applicability for 3R-derived approaches to have a long-lasting impact, this review examines the state of regulatory implementation and perspectives, respectively.

Three-Dimensional Epidermal Model from Human Hair Follicle-Derived Keratinocytes

Three-dimensional (3D) epidermal models reconstructed from human skin-derived keratinocytes have been utilized as an alternative to animal testing and models, not only in toxicology, but also in skin biology. Although there are currently several reconstructed human epidermis (RHE) models commercially available, the donors of the keratinocytes are not identified in these models. A tailor-made system is needed to investigate the individual differences in RHE derived from each donor.It is possible to make an individual RHE using each donor's keratinocytes, which are usually obtained by invasive procedures such as skin excision or biopsy. To overcome this drawback, we established an RHE model using keratinocytes derived from plucked hair follicles as a less invasive procedure under conditions without feeder cells, serum, or matrix proteins. In this chapter, we provide a method of isolation and two-dimensional (2D) culture of keratinocytes derived from adult human plucked hair follicles including the outer root sheath (ORS). We also provide a detailed protocol for establishing an RHE model by culturing the keratinocytes under a 3D culture condition. We believe that our less invasive technique will provide a useful tool for investigating individual RHE in both normal and disease settings.

Property characterization of reconstructed human epidermis equivalents, and performance as a skin irritation model

In recent years, in vitro skin models combining cell biology and tissue engineering have been developed in order to replace animal models for toxicological studies and to serve as research support to better understand skin biology. This study reports the development and characterization of a epidermal tissue equivalent meant to be used to develop and to evaluate the effect of applied cosmetic ingredients, and for alternative toxicological testing. This epidermis equivalent model was characterized relative to the morphological characteristics of short- and long-term maintained tissues by performing histological studies. We also studied the integrity of the epidermal barrier. Finally, with the goal of validating its use as a skin irritation test, we studied the irritation potential of 20 chemical references listed in OECD Test Guideline N°439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method). In 2015, OECD officially published the updated version of the Validated Reference Method (VRM) that uses reconstructed human epidermis models for irritation testing, thus offering the possibility for proposed putative similar test methods to obtain a validation agreement through Performance Standards-based validation. In this study, we observed that the epidermal equivalent we developed showed similarities to human in vivo skin, based on the analyzed parameters. Moreover, its performances as a skin irritation test were similar to the ones described in the OECD Test Guideline N°439.

Xenobiotica-metabolizing enzymes in the skin of rat, mouse, pig, guinea pig, man, and in human skin models

Studies on the metabolic fate of medical drugs, skin care products, cosmetics and other chemicals intentionally or accidently applied to the human skin have become increasingly important in order to ascertain pharmacological effectiveness and to avoid toxicities. The use of freshly excised human skin for experimental investigations meets with ethical and practical limitations. Hence information on xenobiotic-metabolizing enzymes (XME) in the experimental systems available for pertinent studies compared with native human skin has become crucial. This review collects available information of which—taken with great caution because of the still very limited data—the most salient points are: in the skin of all animal species and skin-derived in vitro systems considered in this review cytochrome P450 (CYP)-dependent monooxygenase activities (largely responsible for initiating xenobiotica metabolism in the organ which provides most of the xenobiotica metabolism of the mammalian organism, the liver) are very low to undetectable. Quite likely other oxidative enzymes [e.g. flavin monooxygenase, COX (cooxidation by prostaglandin synthase)] will turn out to be much more important for the oxidative xenobiotic metabolism in the skin. Moreover, conjugating enzyme activities such as glutathione transferases and glucuronosyltransferases are much higher than the oxidative CYP activities. Since these conjugating enzymes are predominantly detoxifying, the skin appears to be predominantly protected against CYP-generated reactive metabolites. The following recommendations for the use of experimental animal species or human skin in vitro models may tentatively be derived from the information available to date: for dermal absorption and for skin irritation esterase activity is of special importance which in pig skin, some human cell lines and reconstructed skin models appears reasonably close to native human skin. With respect to genotoxicity and sensitization reactive-metabolite-reducing XME in primary human keratinocytes and several reconstructed human skin models appear reasonably close to human skin. For a more detailed delineation and discussion of the severe limitations see the Conclusions section in the end of this review.

Skin-on-a-Chip: Transepithelial Electrical Resistance and Extracellular Acidification Measurements through an Automated Air-Liquid Interface

Skin is a critical organ that plays a crucial role in defending the internal organs of the body. For this reason, extensive work has gone into creating artificial models of the epidermis for in vitro skin toxicity tests. These tissue models, called reconstructed human epidermis (RhE), are used by researchers in the pharmaceutical, cosmetic, and environmental arenas to evaluate skin toxicity upon exposure to xenobiotics. Here, we present a label-free solution that leverages the use of the intelligent mobile lab for in vitro diagnostics (IMOLA-IVD), a noninvasive, sensor-based platform, to monitor the transepithelial electrical resistance (TEER) of RhE models and adherent cells cultured on porous membrane inserts. Murine fibroblasts cultured on polycarbonate membranes were first used as a test model to optimize procedures using a custom BioChip encapsulation design, as well as dual fluidic configurations, for continuous and automated perfusion of membrane-bound cultures. Extracellular acidification rate (EAR) and TEER of membrane-bound L929 cells were monitored. The developed protocol was then used to monitor the TEER of MatTek EpiDerm^TM RhE models over a period of 48 h. TEER and EAR measurements demonstrated that the designed system is capable of maintaining stable cultures on the chip, monitoring metabolic parameters, and revealing tissue breakdown over time.

A new reconstructed human epidermis for in vitro skin irritation testing

Different models of reconstructed human epidermis (RHE) are currently validated to assess skin irritation in vitro and ultimately to the animal replacement of the Draize test. The development of a new RHE model is a challenge for many laboratories, representing a potential gain of autonomy and improvement of technological knowledge. The Organization for Economic Co-operation and Development (OECD) encourages the development of new models and, for this purpose, offers a thorough guideline on quality control parameters (OECD TG 439 performance standards). This work aimed to develop an RHE model (i.e. USP-RHE) for in vitro skin irritation assays, following the OECD TG 439. The developed model presents a well-differentiated epidermis similar to the Validated Reference Methods (VRM) and to native human epidermis. Quality parameters, i.e. optical density of negative control, tissue integrity and barrier function, were similar to VRM and in accordance with OECD TG 439. Moreover, the USP-RHE model was shown to have 85,7% of specificity (6/7), 100% of sensitivity (6/6) and 92,3% of accuracy (12/13) when compared to in vivo UN GHS classification. The within-laboratory reproducibility was 92.3% (12/13). Thus, we demonstrated that USP-RHE model attends to all OECD TG 439 performance standards and is ready to be used by private and public laboratories and companies for future validation studies.

Xenobiotic-metabolizing enzymes in the skin of rat, mouse, pig, guinea pig, man, and in human skin models

The exposure of the skin to medical drugs, skin care products, cosmetics, and other chemicals renders information on xenobiotic-metabolizing enzymes (XME) in the skin highly interesting. Since the use of freshly excised human skin for experimental investigations meets with ethical and practical limitations, information on XME in models comes in the focus including non-human mammalian species and in vitro skin models. This review attempts to summarize the information available in the open scientific literature on XME in the skin of human, rat, mouse, guinea pig, and pig as well as human primary skin cells, human cell lines, and reconstructed human skin models. The most salient outcome is that much more research on cutaneous XME is needed for solid metabolism-dependent efficacy and safety predictions, and the cutaneous metabolism comparisons have to be viewed with caution. Keeping this fully in mind at least with respect to some cutaneous XME, some models may tentatively be considered to approximate reasonable closeness to human skin. For dermal absorption and for skin irritation among many contributing XME, esterase activity is of special importance, which in pig skin, some human cell lines, and reconstructed skin models appears reasonably close to human skin. With respect to genotoxicity and sensitization, activating XME are not yet judgeable, but reactive metabolite-reducing XME in primary human keratinocytes and several reconstructed human skin models appear reasonably close to human skin. For a more detailed delineation and discussion of the severe limitations see the “Overview and Conclusions” section in the end of this review.

The use of skin models in drug development

Three dimensional (3D) tissue models of the human skin are probably the most developed and understood in vitro engineered constructs. The motivation to accomplish organotypic structures was driven by the clinics to enable transplantation of in vitro grown tissue substitutes and by the cosmetics industry as alternative test substrates in order to replace animal models. Today a huge variety of 3D human skin models exist, covering a multitude of scientific and/or technical demands. This review summarizes and discusses different approaches of skin model development and sets them into the context of drug development. Although human skin models have become indispensable for the cosmetics industry, they have not yet started their triumphal procession in pharmaceutical research and development. For drug development these tissue models may be of particular interest for a) systemically acting drugs applied on the skin, and b) drugs acting at the site of application in the case of skin diseases or disorders. Although quite a broad spectrum of models covering different aspects of the skin as a biologically acting surface exists, these are most often single stand-alone approaches. In order to enable the comprehensive application into drug development processes, the approaches have to be synchronized to allow a cross-over comparison. Besides the development of biological relevant models, other issues are not less important in the context of drug development: standardized production procedures, process automation, establishment of significant analytical methods, and data correlation. For the successful routine use of engineered human skin models in drug development, major requirements were defined. If these requirements can be accomplished in the next few years, human organotypic skin models will become indispensable for drug development, too.

Residual antimicrobial effect of chlorhexidine digluconate and octenidine dihydrochloride on reconstructed human epidermis

The objective of the present investigation was to examine the residual antimicrobial activity after a topical exposure of reconstructed human epidermis (RHE) to equimolar solutions of either chlorhexidine digluconate (CHG, 0.144% w/v) or octenidine dihydrochloride (OCT, 0.1% w/v) for 15 min. RHE-associated antiseptic agents were more effective on Staphylococcus aureus than on Pseudomonas aeruginosa. S. aureus was not detected after 24 h of contact, which demonstrated a microbicidal efficacy of greater than 5-log10 reduction. In contrast, P. aeruginosa was reduced by approximately 2 log10 at the same incubation time, which parallels the growth of the initial inoculum. This result could be interpreted either as a microbiostatic effect or as an adherence of P. aeruginosa to a low positively charged surface. Small amounts of CHG and OCT can penetrate the stratum corneum. Using these antiseptic agents, the viability of keratinocytes was reduced to 65-75% of that of the untreated RHE control following 24 h incubation in the presence of test microorganisms. With consideration of antimicrobial activity and cytotoxic effect, OCT corresponds better to a biocompatible antiseptic agent than CHG.

Relevance of xenobiotic enzymes in human skin in vitro models to activate pro-sensitizers

Skin exposure to sensitizing chemicals can induce allergic reactions. Certain chemicals, so called pro-sensitizers, need metabolic activation to become allergenic. Their metabolic activation occurs in skin cells such as keratinocytes or dendritic cells. These cell types are also incorporated into dermal in vitro test systems used to assess the sensitizing potential of chemicals for humans. In vitrosystems range from single cell cultures to organotypic multi-cellular reconstructed skin models. Until now, their metabolic competence to unmask sensitizing potential of pro-sensitizers was rarely investigated. This review aims to summarize current information on available skin in vitro models and the relevance of xenobiotic metabolizing enzymes for the activation of pro-sensitizers such as eugenol, 4-allylanisole, and ethylendiamine. Among others, these chemicals are discussed as performance standards to validate new coming in vitro systems for their potential to identify pro-sensitizers.

Reconstructed epidermis and full-thickness skin for absorption testing: influence of the vehicles used on steroid permeation

A protocol for percutaneous absorption studies has been validated, based on the use of reconstructed human epidermis (RHE) and aqueous solutions of test substances. However, it is often the case that it is more-complex formulations of drugs or chemicals which will make contact with the skin surface. To investigate whether RHE and the reconstructed full-thickness skin model (FT-model) can be used to predict uptake from formulations, we compared the permeation of hydrocortisone and testosterone when applied in emulsion form and as a solution containing the penetration enhancer, ethanol. Human and pig skin and a non-cornified alveolar model served as references. The results were compared with steroid release from the formulations. The permeation rates of the steroids were ranked as: alveolar model >> RHE > FT-model, pig skin > human skin. In accordance with the rapid hydrocortisone release from the formulations, the permeation rates of this steroid exceeded those of testosterone. Only minor differences were observed when comparing the testosterone formulations, in terms of release and permeation. However, the ranking of the permeation of the hydrocortisone formulations was: solution > w/o emulsion > o/w emulsion, which permitted the elucidation of penetration enhancing effects, which is not possible with drug release studies. Differences in penetration were most obvious with native skin and reconstructed tissues, which exhibited a well-developed penetration barrier. In conclusion, RHE and skin preparations may be useful in the development of topical dermatics, and in the framework of hazard analysis of toxic compounds and their various formulations.

Integrated Decision-tree Testing Strategies for Skin Corrosion and Irritation with Respect to the Requirements of the EU REACH Legislation

Liverpool John Moores University and FRAME recently conducted a research project, sponsored by Defra, on the status of alternatives to animal testing with regard to the European Union REACH (Registration, Evaluation and Authorisation of Chemicals) system for the safety testing and risk assessment of chemicals. The project covered all the main toxicity endpoints associated with the REACH system. This report focuses on how to maximise the use of alternative methods (both in vitro and in silico) for skin corrosion and irritation testing within a tiered testing strategy. It considers the latest developments in in vitro testing, with particular reference to the reconstituted skin models which have now been now been successfully validated and independently endorsed as suitable for both skin corrosivity and irritancy testing within the EU.

Integrated decision-tree testing strategies for skin corrosion and irritation with respect to the requirements of the EU REACH legislation

Liverpool John Moores University and FRAME recently conducted a research project, sponsored by DEFRA, on the status of alternatives to animal testing with regard to the European Union REACH (Registration, Evaluation and Authorisation of Chemicals) system for the safety testing and risk assessment of chemicals. The project covered all the main toxicity endpoints associated with the REACH system. This report focuses on how to maximise the use of alternative methods (both in vitro and in silico) for skin corrosion and irritation testing within a tiered testing strategy. It considers the latest developments in in vitro testing, with particular reference to the reconstituted skin models which have now been now been successfully validated and independently endorsed as suitable for both skin corrosivity and irritancy testing within the EU.

Toward an evidence-based toxicology

The increasing demands on toxicology of large-scale risk assessment programmes for chemicals and emerging or expanding areas of chemical use suggest it is timely to review the toxicological toolbox. Like in clinical medicine, where an evidence-based medicine (EBM) is critically reviewing traditional approaches, toxicology has the opportunity to reshape and enlarge its methodology and approaches on the basis of compounded scientific knowledge. Such revision would have to be based on structured reviews of current practice, ie, assessment of test performance characteristics, mechanistic understanding, extended quality assurance, formal validation and the use of integrated testing strategies. This form of revision could optimize the balance between safety, costs and animal welfare, explicitly stating and, where possible, quantifying uncertainties. After a self-critical reassessment of current practices and evaluation of the thus generated information, such an evidence-based toxicology (EBT) promises to make better use of resources and to increase the quality of results, facilitating their interpretation. It shall open up hazard and also risk assessments to new technologies, flexibly accommodating current and future mechanistic understanding. An EBT will be better prepared to answer the continuously growing safety demands of modern societies.