Development of the short time exposure (STE) test: an in vitro eye irritation test using SIRC cells

Development of a Probability-Based In Vitro Eye Irritation Screening Platform

Traditional eye irritation assessments, which rely on animal models or ex vivo tissues, face limitations due to ethical concerns, costs, and low throughput. Although numerous in vitro tests have been developed, none have successfully reconciled the need for high experimental throughput with the accurate prediction of irritation potential, attributable to the complexity of irritation mechanisms. Simple cell models, while suitable for high-throughput screening, offer limited mechanistic insights, contrasting with more physiologically relevant but less scalable complex organotypic corneal tissue constructs. This study presents a novel strategy to enhance the predictive accuracy of screening-compatible simple cell models in eye irritation testing. Our method combines the results of two in vitro assays-cell apoptosis and nociceptor (TRPV1) activation-using micropatterned chips to partition human corneal epithelial cells into numerous discrete small populations. Following exposure to test compounds, we measure apoptosis and nociceptor activation responses. The large datasets collected from the cell micropatterns facilitate binarization and statistical fitting to calculate a mathematical probability, which assesses the compound's potential to cause eye irritation. This method potentially enables the amalgamation of multiple mechanistic readouts into a singular index, providing a more accurate and reliable prediction of eye irritation potential in a format amenable to high-throughput screening.

Formulating Resveratrol and Melatonin Self-Nanoemulsifying Drug Delivery Systems (SNEDDS) for Ocular Administration Using Design of Experiments

Recent studies have demonstrated that Sirtuin-1 (SIRT-1)-activating molecules exert a protective role in degenerative ocular diseases. However, these molecules hardly reach the back of the eye due to poor solubility in aqueous environments and low bioavailability after topical application on the eye's surface. Such hindrances, combined with stability issues, call for the need for innovative delivery strategies. Within this context, the development of self-nanoemulsifying drug delivery systems (SNEDDS) for SIRT-1 delivery can represent a promising approach. The aim of the work was to design and optimize SNEDDS for the ocular delivery of two natural SIRT-1 agonists, resveratrol (RSV) and melatonin (MEL), with potential implications for treating diabetic retinopathy. Pre-formulation studies were performed by a Design of Experiment (DoE) approach to construct the ternary phase diagram. The optimization phase was carried out using Response Surface Methodology (RSM). Four types of SNEDDS consisting of different surfactants (Tween® 80, Tween® 20, Solutol® HS15, and Cremophor® EL) were optimized to achieve the best physico-chemical parameters for ocular application. Stability tests indicated that SNEDDS produced with Tween® 80 was the formulation that best preserved the stability of molecules, and so it was, therefore, selected for further technological studies. The optimized formulation was prepared with Capryol® PGMC, Tween® 80, and Transcutol® P and loaded with RSV or MEL. The SNEDDS were evaluated for other parameters, such as the mean size (found to be ˂50 nm), size homogeneity (PDI < 0.2), emulsion time (around 40 s), transparency, drug content (>90%), mucoadhesion strength, in vitro drug release, pH and osmolarity, stability to dilution, and cloud point. Finally, an in vitro evaluation was performed on a rabbit corneal epithelial cell line (SIRC) to assess their cytocompatibility. The overall results suggest that SNEDDS can be used as promising nanocarriers for the ocular drug delivery of RSV and MEL.

Mucoadhesive Hybrid System of Silk Fibroin Nanoparticles and Thermosensitive In Situ Hydrogel for Amphotericin B Delivery: A Potential Option for Fungal Keratitis Treatment

The purpose of this work was to investigate the feasibility of a novel ophthalmic formulation of amphotericin B-encapsulated silk fibroin nanoparticles incorporated in situ hydrogel (AmB-FNPs ISG) for fungal keratitis (FK) treatment. AmB-FNPs ISG composites were successfully developed and have shown optimized physicochemical properties for ocular drug delivery. Antifungal effects against Candida albicans and in vitro ocular irritation using corneal epithelial cells were performed to evaluate the efficacy and safety of the composite formulations. The combined system of AmB-FNPs-ISG exhibited effective antifungal activity and showed significantly less toxicity to HCE cells than commercial AmB. In vitro and ex vivo mucoadhesive tests demonstrated that the combination of silk fibroin nanoparticles with in situ hydrogels could enhance the adhesion ability of the particles on the ocular surface for more than 6 h, which would increase the ocular retention time of AmB and reduce the frequency of administration during the treatment. In addition, AmB-FNP-PEG ISG showed good physical and chemical stability under storage condition for 90 days. These findings indicate that AmB-FNP-PEG ISG has a great potential and be used in mucoadhesive AmB eye drops for FK treatment.

Celecoxib/Cyclodextrin Eye Drop Microsuspensions: Evaluation of In Vitro Cytotoxicity and Anti-VEGF Efficacy for Retinal Diseases

Celecoxib (CCB), a cyclooxygenase-2 inhibitor, is capable of reducing oxidative stress and vascular endothelial growth factor (VEGF) expression in retinal cells and has been shown to be effective in the treatment of diabetic retinopathy and age-related macular degeneration. However, the ocular bioavailability of CCB is hampered due to its very low aqueous solubility. In a previous study, we developed 0.5% (w/v) aqueous CCB eye drop microsuspensions (MS) containing randomly methylated β-cyclodextrin (RMβCD) or γ-cyclodextrin (γCD) and hyaluronic acid (HA) as ternary CCB/CD/HA nanoaggregates. Both formulations exhibited good physicochemical properties. Therefore, we further investigated their cytotoxicity and efficacy in a human retina cell line in this study. At a CCB concentration of 1000 μg/mL, both CCB/RMβCD and CCB/γCD eye drop MS showed low hemolysis activity (11.1 ± 0.3% or 4.9 ± 0.2%, respectively). They revealed no signs of causing irritation and were nontoxic to retinal pigment epithelial cells. Moreover, the CCB eye drop MS exhibited significant anti-VEGF activity by reducing VEGF mRNA and protein levels compared to CCB suspended in phosphate buffer saline. The ex vivo transscleral diffusion demonstrated that a high quantity of CCB (112.47 ± 37.27 μg/mL) from CCB/γCD eye drop MS was deposited in the porcine sclera. Our new findings suggest that CCB/CD eye drop MS could be safely delivered to the ocular tissues and demonstrate promising eye drop formulations for retinal disease treatment.

A promising synthetic citric crosslinked β-cyclodextrin derivative for antifungal drugs: Solubilization, cytotoxicity, and antifungal activity

Effective antifungal therapy for the treatment of fungal keratitis requires a high drug concentration at the corneal surface. However, the use of natural β-cyclodextrin (βCD) in the preparation of aqueous eye drop formulations for treating fungal keratitis is limited by its low aqueous solubility. Here, we synthesized water-soluble anionic βCD derivatives capable of forming water-soluble complexes and evaluated the solubility, cytotoxicity, and antifungal efficacy of drug prepared using the βCD derivative. To achieve this, a citric acid crosslinked βCD (polyCTR-βCD) was successfully synthesized, and the aqueous solubilities of selected antifungal drugs, including voriconazole, miconazole (MCZ), itraconazole, and amphotericin B, in polyCTR-βCD and analogous βCD solutions were evaluated. Among the drugs tested, complexation of MCZ with polyCTR-βCD (MCZ/polyCTR-βCD) increased MCZ aqueous solubility by 95-fold compared with that of MCZ/βCD. The inclusion complex formation of MCZ/βCD and MCZ/polyCTR-βCD was confirmed by spectroscopic techniques. Additionally, the nanoaggregates of saturated MCZ/polyCTR-βCD and MCZ/βCD solutions were observed using dynamic light scattering and transmission electron microscopy. Moreover, MCZ/polyCTR-βCD solution exhibited good mucoadhesion, sustained drug release, and high drug permeation of porcine cornea ex vivo. Hen's Egg test-chorioallantoic membrane assay and cell viability study using Statens Seruminstitut Rabbit Cornea cell line showed that both MCZ/polyCTR-βCD and MCZ/βCD exhibited no sign of irritation and non-toxic to cell line. Additionally, antifungal activity evaluation demonstrated that all isolated fungi, including Candida albicans, Aspergillus flavus, and Fusarium solani, were susceptible to MCZ/polyCTR-βCD. Overall, the results showed that polyCTR-βCD could be a promising nanocarrier for the ocular delivery of MCZ.

Optically Clear Silk Fibroin Films with Tunable Properties for Potential Corneal Tissue Engineering Applications: A Process-Property-Function Relationship Study

Owing to the shortage of donor corneas and issues associated with conventional corneal transplantation, corneal tissue engineering has emerged as a promising therapeutic alternative. Biocompatibility and other attractive features make silk fibroin a biomaterial of choice for corneal tissue engineering applications. The current study presents three modes of silk fibroin film fabrication by solvent casting with popular solvents, viz. aqueous (aq), formic acid (FA), and hexafluoroisopropanol (HFIP), followed by three standard modes of postfabrication annealing with water vapor, methanol vapor, and steam, and systematic characterization studies including corneal cell culture in vitro. The results indicated that silk fibroin films made from aq, FA, and HFIP solvents had surface roughness (Rq) of 1.39, 0.32, and 0.13, contact angles of 73°, 85°, and 89°, water uptake% of 58, 29, and 27%, swelling ratios of 1.58, 1.3, and 1.28, and water vapor transmission% of 39, 26, and 22%, respectively. The degradation rate was in the order of aq > HF > FA, whereas the tensile strength was in the order of aq < HF < FA. Further, the results of the annealing process indicated notable changes in morpho-topographical, physical, degradation, and tensile properties. However, the films showed no detectable changes in chemical composition and remained optically clear with >90% transmission in the visible range, irrespective of fabrication and postfabrication processing conditions. The films were noncytotoxic against L929 cells and were cytocompatible with rabbit cornea-derived SIRC cells in vitro. The study demonstrated the potential of fine-tuning various properties of silk fibroin films by varying the fabrication and postfabrication processing conditions.

Evaluation of in vitro cornea models for quantifying destructive effects of chemicals

In vitro models are available as alternatives for the Draize eye irritation test. However, most of the alternative models are not quantitative nor designed to evaluate the effects of chemicals on the corneal barrier such as those encountered in pharmaceutical and cosmetic products. The objective of the present study was to investigate tissue electrical resistance to provide sensitive in vitro testing of tissue alteration caused by chemicals in pharmaceutical and cosmetic formulations as a potential eye irritation testing approach. The experimental protocols for effective tissue resistance measurements were examined using two in vitro eye models: porcine cornea and EpiCorneal. In these models, a test chemical was applied to the cornea or EpiCorneal tissue for 1 min, and tissue resistances/conductances were measured at 1-60 min after the application. The changes in conductance of the tissues after exposure to the chemicals were shown to provide quantitative evaluations to the influence of the chemicals. A correlation was found between the two in vitro models. The results suggest that these models can provide quantitative in vitro assessments of chemical formulations such as those prepared by eye-irritating chemicals.

Development of Fenofibrate/Randomly Methylated β-Cyclodextrin-Loaded Eudragit® RL 100 Nanoparticles for Ocular Delivery

Fenofibrate (FE) has been shown to markedly reduce the progression of diabetic retinopathy and age-related macular degeneration in clinical trials and animal models. Owing to the limited aqueous solubility of FE, it may hamper ocular bioavailability and result in low efficiency to treat such diseases. To enhance the solubility of FE, water-soluble FE/cyclodextrin (CD) complex formation was determined by a phase-solubility technique. Randomly methylated-β-CD (RMβCD) exhibited the best solubility and the highest complexation efficiency (CE) for FE. Additionally, water-soluble polymers (i.e., hydroxypropyl methyl cellulose and polyvinyl alcohol [PVA]) enhanced the solubility of FE/RMβCD complexes. Solid- and solution-state characterizations were performed to elucidate and confirm the formation of inclusion FE/RMβCD complex. FE-loaded Eudragit^® nanoparticle (EuNP) dispersions and suspensions were developed. The physicochemical properties (i.e., pH, osmolality, viscosity, particle size, size distribution, and zeta potential) were within acceptable ranges. Moreover, in vitro mucoadhesion, in vitro release, and in vitro permeation studies revealed that the FE-loaded EuNP eye drop suspensions had excellent mucoadhesive properties and sustained FE release. The hemolytic activity, hen’s egg test on chorioallantoic membrane assay, and in vitro cytotoxicity test showed that the FE formulations had low hemolytic activity, were cytocompatible, and were moderately irritable to the eyes. In conclusion, PVA-stabilized FE/RMβCD-loaded EuNP eye drop suspensions were successfully developed, warranting further in vivo testing.

Physicochemical and Stability Evaluation of Topical Niosomal Encapsulating Fosinopril/γ-Cyclodextrin Complex for Ocular Delivery

This study aimed to develop a chemically stable niosomal eye drop containing fosinopril (FOS) for lowering intraocular pressure. The effects of cyclodextrin (CD), surfactant types and membrane stabilizer/charged inducers on physiochemical and chemical properties of niosome were evaluated. The pH value, average particle size, size distribution and zeta potentials were within the acceptable range. All niosomal formulations were shown to be slightly hypertonic with low viscosity. Span® 60/dicetyl phosphate niosomes in the presence and absence of γCD were selected as the optimum formulations according to their high %entrapment efficiency and negative zeta potential values as well as controlled release profile. According to ex vivo permeation study, the obtained lowest flux and apparent permeability coefficient values confirmed that FOS/γCD complex was encapsulated within the inner aqueous core of niosome and could be able to protect FOS from its hydrolytic degradation. The in vitro cytotoxicity revealed that niosome entrapped FOS or FOS/γCD formulations were moderate irritation to the eyes. Furthermore, FOS-loaded niosomal preparations exhibited good physical and chemical stabilities especially of those in the presence of γCD, for at least three months under the storage condition of 2–8 °C.

Novel Formulation of Eye Drops Containing Choline Salicylate and Hyaluronic Acid: Stability, Permeability, and Cytotoxicity Studies Using Alternative Ex Vivo and In Vitro Models

This work investigated the potential of a novel formulation of eye drops containing a non-steroidal anti-inflammatory drug-choline salicylate (CS)-and hyaluronic acid (HA). Thus, these drops may exert both anti-inflammatory and regenerative activity. The experiment was conducted through the careful characterization of physicochemical properties, stability, and quality of eye drops. Moreover, microbiological analysis, as well as penetration and cytotoxic studies, were performed. The UV, HPLC-UV, and HPLC-MS/MS methods were used to determine the purity and stability of CS. The penetration rate of CS was assessed using a hydrophilic membrane and ex vivo porcine cornea model. Additionally, the cytotoxic effects were evaluated using the SIRC cell line. The interaction between HA and CS was tested using size-exclusion chromatography and IR spectrophotometry. As a result, HA increased the viscosity of the drops, which prolonged their contact with the ocular surface, thus ensuring more effective penetration of CS into the corneal structure. After long-term storage, an interaction in the pharmaceutical phase between CS and HA was observed. However, this interaction did not affect the viability of rabbit corneal cells. Our findings showed that eye drops with CS and HA, stored at 2-8 °C in light-protected conditions, met the criteria of stability and safety.

Formulation of Ocular In Situ Gels with Lithuanian Royal Jelly and Their Biopharmaceutical Evaluation In Vitro

Royal jelly is a natural substance produced by worker bees that possesses a variety of biological activities, including antioxidant, anti-inflammatory, antibacterial, and protective. Although fresh royal jelly is kept at low temperatures, to increase its stability, it needs to be incorporated into pharmaceutical formulations, such as in situ gels. The aim of this study was to formulate in situ ocular gels containing Lithuanian royal jelly for topical corneal use in order to increase the retention time of the formulation on the ocular surface and bioavailability. Gels were evaluated for physicochemical characteristics (pH, rheological properties, refractive index) and in vitro drug release measuring the amount of 10-hydroxy-2-decenoic acid (10-HDA). An ocular irritation test and cell viability tests were performed using the SIRC (Statens Seruminstitut Rabbit Cornea) cell culture line. Results indicated that all the in situ gels were within an acceptable pH and refractive index range close to corneal properties. Rheology studies have shown that the gelation temperature varies between 25 and 32 °C, depending on the amount of poloxamers. The release studies have shown that the release of 10-HDA from in situ gels is more sustained than royal jelly suspension. All gel formulations were non-irritant according to the short-time exposure test (STE) using the SIRC cell culture line, and long-term cell viability studies indicated that the formulations used in small concentrations did not induce cell death. Prepared in situ gels containing royal jelly have potential for ocular drug delivery, and they may improve the bioavailability, stability of royal jelly, and formation of non-irritant ocular formulations.

Human-relevant approaches to assess eye corrosion/irritation potential of agrochemical formulations

There are multiple in vitro and ex vivo eye irritation and corrosion test methods that are available as internationally harmonized test guidelines for regulatory use. Despite their demonstrated usefulness to a broad range of substances through inter-laboratory validation studies, they have not been widely adopted for testing agrochemical formulations due to a lack of concordance with parallel results from the traditional regulatory test method for this endpoint, the rabbit eye test. The inherent variability of the rabbit test, differences in the anatomy of the rabbit and human eyes, and differences in modelling exposures in rabbit eyes relative to human eyes contribute to this lack of concordance. Ultimately, the regulatory purpose for these tests is protection of human health, and, thus, there is a need for a testing approach based on human biology. This paper reviews the available in vivo, in vitro and ex vivo test methods with respect to their relevance to human ocular anatomy, anticipated exposure scenarios, and the mechanisms of eye irritation/corrosion in humans. Each of the in vitro and ex vivo methods described is generally appropriate for identifying non-irritants. To discriminate among eye irritants, the human three-dimensional epithelial and full thickness corneal models provide the most detailed information about the severity of irritation. Consideration of the mechanisms of eye irritation, and the strengths and limitations of the in vivo, in vitro and ex vivo test methods, show that the in vitro/ex vivo methods are as or more reflective of human biology and less variable than the currently used rabbit approach. Suggestions are made for further optimizing the most promising methods to distinguish between severe (corrosive), moderate, mild and non-irritants and provide information about the reversibility of effects. Also considered is the utility of including additional information (e.g. physical chemical properties), consistent with the Organization for Economic Cooperation and Development's guidance document on an integrated approach to testing and assessment of potential eye irritation. Combining structural and functional information about a test substance with test results from human-relevant methods will ensure the best protection of humans following accidental eye exposure to agrochemicals.

Preparation of Ophthalmic Microemulsions Containing Lithuanian Royal Jelly and Their Biopharmaceutical Evaluation

Royal jelly is a natural substance secreted by worker honeybees that possesses antioxidant, anti-inflammatory, and other biological activities. The purpose of this study was to formulate microemulsions with incorporated Lithuanian royal jelly for possible ophthalmic delivery and to evaluate the quality of the microemulsions in vitro. The oil in water type microemulsions were prepared by the oil titration method, incorporating royal jelly, surfactant, co-surfactant, oil, and water. Physicochemical characteristics of the microemulsions and the quantity of 10-hydroxy-2-decenoic acid released in vitro were assessed. The in vitro assessment of prepared microemulsions formulations was performed with the Statens Seruminstitut rabbit cornea (SIRC) cell culture model. The results revealed that the droplet size of all microemulsion formulations was 67.88–124.2 nm and the polydispersity index was lower than 0.180. In the in vitro release study, the release of 10-hydroxy-2-decenoic acid depended on the amount of royal jelly incorporated and on the ratio of surfactant and co-surfactant in formulations. The in vitro tests with the SIRC cell culture line have shown that all formulations were found non-irritating.

In vitro reconstructed 3D corneal tissue models for ocular toxicology and ophthalmic drug development

Testing of all manufactured products and their ingredients for eye irritation is a regulatory requirement. In the last two decades, the development of alternatives to the in vivo Draize eye irritation test method has substantially advanced due to the improvements in primary cell isolation, cell culture techniques, and media, which have led to improved in vitro corneal tissue models and test methods. Most in vitro models for ocular toxicology attempt to reproduce the corneal epithelial tissue which consists of 4-5 layers of non-keratinized corneal epithelial cells that form tight junctions, thereby limiting the penetration of chemicals, xenobiotics, and pharmaceuticals. Also, significant efforts have been directed toward the development of more complex three-dimensional (3D) equivalents to study wound healing, drug permeation, and bioavailability. This review focuses on in vitro reconstructed 3D corneal tissue models and their utilization in ocular toxicology as well as their application to pharmacology and ophthalmic research. Current human 3D corneal epithelial cell culture models have replaced in vivo animal eye irritation tests for many applications, and substantial validation efforts are in progress to verify and approve alternative eye irritation tests for widespread use. The validation of drug absorption models and further development of models and test methods for many ophthalmic and ocular disease applications is required.

A proposal for a new in vitro method for direct classification of eye irritants by cytotoxicity test - Preliminary study

None of the in vitro method are suitable for directly classifying of a substance as an eye irritant (category 2). They can classify substance as category 1 (serious eye damage) or as "no category" (not requiring classification). The aim of this study was to develop a new method for direct classification of a substance as category 2. Cytotoxicity Assay to Assess Eye Irritation (CEI) was performed on fibroblast - HDFn cell line with 36 substances. 5 concentrations of all substances and neat substances were applied directly to the cells. After 30 min, medium was added and cells were incubated at 37 °C. The next day, the cytotoxicity assay was performed (MTT assay in the first run and NRU assay in the second run). Based on viability and IC50 value (concentration with 50 % viability) a substance could be classified in category 2, category 1, and as "no category". The results obtained were referred to ECHA database. This new method had high sensitivity (53.8-88.9 %), specificity (73.9-100.0 %) and accuracy (69.4-88.9 %) in the classification to all categories. It effectively classifies not only substances in category 2 but also in category 1 and substances that do not require classification.

Quaternary Ammonium Chitosans: The Importance of the Positive Fixed Charge of the Drug Delivery Systems

As a natural polysaccharide, chitosan has good biocompatibility, biodegradability and biosecurity. The hydroxyl and amino groups present in its structure make it an extremely versatile and chemically modifiable material. In recent years, various synthetic strategies have been used to modify chitosan, mainly to solve the problem of its insolubility in neutral physiological fluids. Thus, derivatives with negative or positive fixed charge were synthesized and used to prepare innovative drug delivery systems. Positively charged conjugates showed improved properties compared to unmodified chitosan. In this review the main quaternary ammonium derivatives of chitosan will be considered, their preparation and their applications will be described to evaluate the impact of the positive fixed charge on the improvement of the properties of the drug delivery systems based on these polymers. Furthermore, the performances of the proposed systems resulting from in vitro and ex vivo experiments will be taken into consideration, with particular attention to cytotoxicity of systems, and their ability to promote drug absorption.

Topical instillation of triamcinolone acetonide-loaded emulsomes for posterior ocular delivery: statistical optimization and in vitro-in vivo studies

The objective of the present investigation was to formulate and characterize a novel lipid-based carrier-emulsomes loaded with triamcinolone acetonide (TA)/Nile red (NR) for non-invasive delivery to the posterior segment of the eye upon topical application. To optimize and delineate the effect of independent variables on dependent variables, Box-Behnken design (BBD) was adopted. The optimized batch was characterized for size, zeta potential, surface morphology by transmission electron microscopy, drug-excipient interaction by differential scanning calorimetry, osmolarity, pH, ex vivo transcorneal permeation, and stability studies. A short-term exposure (STE) test was performed on Statens Seruminstitut Rabbit Corneal (SIRC) cell lines to evaluate the in vitro ocular irritation. Precorneal retention study was performed in rabbit eyes. Confocal microscopy was used for ocular distribution studies in mice eye by preparing dye (Nile red)-loaded formulations. The surface response and contour plots along with ANOVA results demonstrated an interaction between the factors. The optimized batch had particle size of 131.17 ± 3.17 nm and entrapment efficiency of 71.56 ± 4.19%. TEM image showed unimodal, nano-sized emulsomes. TA-loaded emulsomes exhibited higher transcorneal permeation as compared to drug solution. In vitro irritation studies confirmed the safety of excipients for ophthalmic use. Fluorescence microscopic images obtained after ocular distribution studies showed strong fluorescence in inner and outer plexiform layers of the retina in comparison to dye solution confirming the delivery of dye to the posterior segment of mice eye after topical ocular instillation. Graphical abstract.

Comparison of the potential mechanisms for hepatotoxicity of p-dialkoxy chlorobenzenes in rat primary hepatocytes for read-across

Read-across based on only structural similarity is considered to have a risk of error in chemical risk assessment. Under these circumstances, considering biological similarity based on adverse outcome pathways using in vitro omics technologies is expected to enhance the accuracy and robustness of conclusions in read-across. However, due to a lack of practical case studies, key considerations and use of these technologies for data gap filling are not well discussed. Here we extracted and compared the potential mechanisms for hepatotoxicity for structural analogs of p-dialkoxy chlorobenzenes including 1,4-dichloro-2,5-dimethoxybenzene (DDMB), 2,5-dichloro-1,4-diethoxybenzene (DDEB), 2-chloro-1,4-dimethoxybenzene (CDMB), and 1-chloro-2,5-diethoxybenzene (CDEB) using in vitro omics technologies for read-across. To reveal the potential mechanisms for hepatotoxicity, we conducted microarray analysis with rat primary hepatocytes. The results showed that three (DDMB, DDEB, CDEB) of the four chemicals affected similar biological pathways such as peroxisome proliferation, oxidative stress, and mitochondrial dysfunction. Furthermore, these biological pathways are consistent with in vivo hepatotoxicity in the source chemical, DDMB. In contrast, CDMB did not affect a specific toxicological pathway. Taken together, these data show the potential mechanisms for hepatotoxicity for three chemicals (DDMB, DDEB, CDEB) and provide novel insights into grouping chemicals using in vitro toxicogenomics for read-across.

Human-Derived Corneal Epithelial Cells Expressing Cell Cycle Regulators as a New Resource for in vitro Ocular Toxicity Testing

The Draize test has been used on rabbits since the 1960s to evaluate the irritation caused by commercial chemicals in products such as cosmetics or hairdressing products. However, since 2003, such tests, including the Draize test for cosmetics, have been prohibited in European countries because they are considered problematic to animal welfare. For this reason, replacement of in vivo methods with the alternative in vitro methods has become an important goal. In this study, we established a corneal epithelial cell line co-expressing a mutant cyclin-dependent kinase 4 (CDK4), Cyclin D1, and telomerase reverse transcriptase (TERT). The established cell line maintained its original morphology and had an enhanced proliferation rate. Furthermore, the cells showed a significant, dose-dependent decrease in viability in an irritation test using glycolic acid and Benzalkonium chloride. These cells can now be shared with toxicology scientists and should contribute to increasing the reproducibility of chemical testing in vitro.

Investigation of comet assays under conditions mimicking ocular instillation administration in a three-dimensional reconstructed human corneal epithelial model

Purpose: A comet assay is one of the genotoxicity methods for evaluating the potential of chemicals to induce DNA strand breaks. To investigate the usefulness of comet assays for evaluating the genotoxic potential of ophthalmic solutions, a three-dimensional (3D) reconstructed human corneal epithelial model (3D corneal model) was exposed to conditions mimicking topical ocular instillation administration. Methods: The 3D corneal model was exposed to acridine orange, ethidium bromide, hydrogen peroxide, 1,1'-dimethyl-4,4'-bipyridinium dichloride (paraquat), 4-nitroquinoline 1-oxide (4-NQO), acrylamide and methyl methanesulfonate (MMS). To mimic the ocular surface condition to which ophthalmic solutions are administered, the exposure time was set to 1 minute. Likewise, human corneal epithelial (HCE-T) cells, as monolayer cultured cells, were exposed to the same chemicals, for comparison. Results: In the 3D corneal model, the amount of DNA fragments was statistically significantly increased in cells treated with each of the test chemicals except acrylamide. In HCE-T cells, the amount of DNA fragments was statistically significantly increased in acridine orange-, ethidium bromide-, hydrogen peroxide-, 4-NQO- and MMS-treated cells but not in paraquat- or acrylamide-treated cells. In the 3D corneal model, the lowest concentrations at which we observed DNA damage were about 100 times higher than the concentrations in HCE-T cells. Since the 3D corneal model is morphologically similar to human corneal tissue, form a multilayer and having tight junctions, it may be that the test chemicals only permeated about 1% into the 3D corneal model. Conclusion: These results suggest that the comet assay using 3D cell culture models may reflect in vivo conditions better than do monolayer cultured cells, and that the comet assay may be useful for the evaluation of genotoxic potential of topical ophthalmic solution.

Expansion of the applicability domain for highly volatile substances on the Short Time Exposure test method and the predictive performance in assessing eye irritation potential

The Short Time Exposure (STE) test method is an in vitro method for assessing the eye irritation potential of chemicals and is used to classify the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Category 1 and No Category (NC). The method has been adopted by the Organisation for Economic Co-operation and Development (OECD) as test guideline (TG) 491 since 2015. While this method can be used to classify GHS NC, it is not suitable for testing highly volatile substances and solids other than surfactants. Here we evaluated highly volatile substances to expand the applicability domain. According to TG 491, acetone, ethanol, iso-propanol, and methyl acetate as highly volatile substances resulted in false negatives. Saline was selected as a solvent of these false negatives. In this study, mineral oil was used as the solvent, because these false negatives were amphiphilic. Based on this change, four highly volatile substances were correctly evaluated. The predictive performance for classifying GHS NC was then verified using a substance dataset constructed in reference to the Draize eye test Reference Database and STE Summary Review Document. The accuracy and false-negative rate were 86.6% (194/224) and 3.8% (3/80), respectively. Collectively, the applicability domain was expanded by changing the solvent to mineral oil for highly volatile substances, and the predictive performance for the new applicability domain including highly volatile substances was excellent. The STE test method is suitable to classify GHS NC, indicating its applicability as a test method in a bottom-up approach.

Evaluation of ocular irritancy of coal-tar dyes used in cosmetics employing reconstructed human cornea-like epithelium and short time exposure tests

Coal-tar dyes in cosmetics may elicit adverse effects in the skin and eyes. Countries, like the US, have banned the use of coal-tar dyes in cosmetics for the eye area due to the potential for ocular irritation. We evaluated the eye irritation potential of 15 coal-tar dyes permitted as cosmetic ingredients in reconstructed human cornea-like epithelium (RhCEs [EpiOcular™ and MCTT HCE™]) tests and the short time exposure (STE) test. Eosin YS, phloxine B, tetrachlorotetrabromofluorescein, and tetrabromofluorescein were identified as irritants in RhCEs; dibromofluorescein and uranine yielded discrepant results. STE enabled further classification in accordance with the UN Globally Harmonized System of Classification and Labelling of Chemicals, as follows: eosin YS as Cat 2; phloxine B, Cat 1; and tetrachlorotetrabromofluorescein and tetrabromofluorescein, Cat 1/2. STE indicated dibromofluorescein (irritant in EpiOcular™) and uranine (irritant in MCTT HCE™) as No Cat, resulting in the classification of "No prediction can be made." based on bottom-up approach with each model. These results demonstrated that in vitro eye irritation tests can be utilized to evaluate the potential ocular irritancy of cosmetic ingredients and provide significant evidence with which to determine whether precautions should be given for the use of coal-tar dyes in cosmetics or other substances applied to the eye area.

Alternatives to In Vivo Draize Rabbit Eye and Skin Irritation Tests with a Focus on 3D Reconstructed Human Cornea-Like Epithelium and Epidermis Models

Human eyes and skin are frequently exposed to chemicals accidentally or on purpose due to their external location. Therefore, chemicals are required to undergo the evaluation of the ocular and dermal irritancy for their safe handling and use before release into the market. Draize rabbit eye and skin irritation test developed in 1944, has been a gold standard test which was enlisted as OECD TG 404 and OECD TG 405 but it has been criticized with respect to animal welfare due to invasive and cruel procedure. To replace it, diverse alternatives have been developed: (i) For Draize eye irritation test, organotypic assay, in vitro cytotoxicity-based method, in chemico tests, in silico prediction model, and 3D reconstructed human cornea-like epithelium (RhCE); (ii) For Draize skin irritation test, in vitro cytotoxicity-based cell model, and 3D reconstructed human epidermis models (RhE). Of these, RhCE and RhE models are getting spotlight as a promising alternative with a wide applicability domain covering cosmetics and personal care products. In this review, we overviewed the current alternatives to Draize test with a focus on 3D human epithelium models to provide an insight into advancing and widening their utility.

Gamma sterilization of diclofenac sodium loaded- N-trimethyl chitosan nanoparticles for ophthalmic use

This study was conducted to investigate the effect of gamma irradiation on physicochemical properties of N-trimethyl chitosan (TMC), diclofenac sodium (DC) and diclofenac sodium loaded N-trimethylchitosan nanoparticles (DC-TMCNs), and to determine suitable doses of gamma rays for sterilization of DC-TMCNs. Physicochemical properties of TMC, DC and DC-TMCNs before and after exposure to gamma rays at various doses were investigated. It was found that gamma irradiation at doses of 5-25kGy did not cause any significant changes in physical and chemical properties of TMC, DC and DC-TMCNs. The bioburden of DC-TMCNs was 1.5×10⁶ CFU/vial. The initial contaminating bacteria were radiosensitive bacteria. A number of microorganisms was reduced to 10^-6 after exposure to 9.9kGy of gamma rays. Therefore, DC-TMCNs could be sterilized by gamma irradiation at a dose of 10kGy, which did not alter their physicochemical properties and did not produce any substances toxic to the eye.

Cosmetics Europe compilation of historical serious eye damage/eye irritation in vivo data analysed by drivers of classification to support the selection of chemicals for development and evaluation of alternative methods/strategies: the Draize eye test Reference Database (DRD)

A thorough understanding of which of the effects assessed in the in vivo Draize eye test are responsible for driving UN GHS/EU CLP classification is critical for an adequate selection of chemicals to be used in the development and/or evaluation of alternative methods/strategies and for properly assessing their predictive capacity and limitations. For this reason, Cosmetics Europe has compiled a database of Draize data (Draize eye test Reference Database, DRD) from external lists that were created to support past validation activities. This database contains 681 independent in vivo studies on 634 individual chemicals representing a wide range of chemical classes. A description of all the ocular effects observed in vivo, i.e. degree of severity and persistence of corneal opacity (CO), iritis, and/or conjunctiva effects, was added for each individual study in the database, and the studies were categorised according to their UN GHS/EU CLP classification and the main effect driving the classification. An evaluation of the various in vivo drivers of classification compiled in the database was performed to establish which of these are most important from a regulatory point of view. These analyses established that the most important drivers for Cat 1 Classification are (1) CO mean ≥ 3 (days 1-3) (severity) and (2) CO persistence on day 21 in the absence of severity, and those for Cat 2 classification are (3) CO mean ≥ 1 and (4) conjunctival redness mean ≥ 2. Moreover, it is shown that all classifiable effects (including persistence and CO = 4) should be present in ≥60 % of the animals to drive a classification. As a consequence, our analyses suggest the need for a critical revision of the UN GHS/EU CLP decision criteria for the Cat 1 classification of chemicals. Finally, a number of key criteria are identified that should be taken into consideration when selecting reference chemicals for the development, evaluation and/or validation of alternative methods and/or strategies for serious eye damage/eye irritation testing. Most important, the DRD is an invaluable tool for any future activity involving the selection of reference chemicals.

Analysis of Draize eye irritation testing and its prediction by mining publicly available 2008-2014 REACH data

Public data from ECHA online dossiers on 9,801 substances encompassing 326,749 experimental key studies and additional information on classification and labeling were made computable. Eye irritation hazard, for which the rabbit Draize eye test still represents the reference method, was analyzed. Dossiers contained 9,782 Draize eye studies on 3,420 unique substances, indicating frequent retesting of substances. This allowed assessment of the test's reproducibility test based on all substances tested more than once. There was a 10% chance of a non-irritant evaluation given after a prior severe-irritant result as given by UN GHS classification criteria. The most reproducible outcomes were the results negative (94% reproducible) and severe eye irritant (73% reproducible). To evaluate whether other GHS categorizations predict eye irritation we built a dataset of 5,629 substances (1,931 'irritant' and 3,698 'non-irritant'). The two best decision trees with up to three other GHS classifications resulted in balanced accuracies of 68% and 73%, i.e., in the rank order of the Draize rabbit eye test itself, but both use inhalation toxicity data ("May cause respiratory irritation"), which is not typically available. Next, a dataset of 929 substances with at least one Draize study was mapped to PubChem to compute chemical similarity using 2D conformational fingerprints and Tanimoto similarity. Using a minimum similarity of 0.7 and simple classification by the closest chemical neighbor resulted in balanced accuracy from 73% over 737 substances to 100% at a threshold of 0.975 over 41 substances. This represents a strong support of read-across and (Q)SAR approaches in this area.

Assessment of the eye irritation potential of chemicals: A comparison study between two test methods based on human 3D hemi-cornea models

We have recently developed two hemi-cornea models (Bartok et al., Toxicol in Vitro 29, 72, 2015; Zorn-Kruppa et al. PLoS One 9, e114181, 2014), which allow the correct prediction of eye irritation potential of chemicals according to the United Nations globally harmonized system of classification and labeling of chemicals (UN GHS). Both models comprise a multilayered epithelium and a stroma with embedded keratocytes in a collagenous matrix. These two models were compared, using a set of fourteen test chemicals. Their effects after 10 and 60 minutes (min) exposure were assessed from the quantification of cell viability using the MTT reduction assay. The first approach separately quantifies the damage inflicted to the epithelium and the stroma. The second approach quantifies the depth of injury by recording cell death as a function of depth. The classification obtained by the two models was compared to the Draize rabbit eye test and an ex vivo model using rabbit cornea (Jester et al. Toxicol in Vitro. 24, 597-604, 2010). With a 60 min exposure, both of our models are able to clearly differentiate UN GHS Category 1 and UN GHS Category 2 test chemicals.

Development and Evaluation of Diclofenac Sodium Loaded-N-Trimethyl Chitosan Nanoparticles for Ophthalmic Use

The ophthalmic preparation of diclofenac sodium (DC) for relieving ocular inflammation is presently available in the market only as an eye drop solution. Due to its low occular bioavailability, it requires frequent application leading to low patients' compliance and quality of life. This study was conducted to develop formulations of DC loaded-N-trimethyl chitosan nanoparticles (DC-TMCNs) for ophthalmic use to improve ocular biavailabiltiy of DC. DC-TMCNs varied in formulation compositions were prepared using ionic gelation technique and evaluated for their physicochemical properties, drug release, eye irritation potential, and ophthalmic absorption of diclofenac sodium. N-Trimethyl chitosan (TMC) with a 49.8% degree of quaternization was synthesized and used for DC-TMCNs production. The obtained DC-TMCNs had particle size in a range of 130-190 nm with zeta potential values of +4 to +9 mV and drug entrapment efficiencies of more than 70% depending on the content of TMC and sodium tripolyphosphate (TPP). The optimized DC-TMCNs formulation contained TMC, DC, and TPP at a weight ratio of TMC/DC/TPP = 3:1:1. Their lyophilized product reconstituted with phosphate buffer solution pH 5.5 possessed a drug release pattern that fitted within the zero-order model. The eye irritation tests showed that DC-TMCNs were safe for ophthalmic use. The in vivo ophthalmic drug absorption study performed on rabbits indicated that DC-TMCNs could improve ophthalmic bioavailability of DC. Results of this study suggested that DC-TMCNs had potential for use as an alternative to conventional DC eye drops for ophthalmic inflammation treatment.

Development and evaluation of an emulsion containing lycopene for combating acceleration of skin aging

Lycopene, a carotenoid and potent antioxidant is found in large quantities in tomatoes. Lycopene combats diseases, such as cardiovascular disease and different types of cancer, including prostate cancer. However, its topical use in emulsion form for the combat of skin aging is under-explored. The aim of the present study was to develop an emulsion containing lycopene extracted from salad tomatoes and evaluate its cytotoxicity, stability, rheological behavior, antioxidant activity and phytocosmetic permeation. The developed cosmetic comprised an oil phase made up of shea derivatives and was evaluated in terms of its physiochemical stability, spreadability, thermal analysis, rheological behavior, microbiological quality, cytotoxicity, antioxidant activity, cutaneous permeation and retention. The results demonstrate that this phytocosmetic is stable, exhibits satisfactory rheological behavior for a topical formula and is a promising product for combating skin aging.

Assessing the systemic toxicity in rabbits after sub acute exposure to ocular irritant chemicals

Eye is a highly vascularised organ. There are chances that a foreign substance can enter the systemic circulation through the eye and cause oxidative stress and evoke immune response. Here the eyes of rabbits were exposed, for a period of 7 days, to 5 known ocular irritants: Cetyl pyridinium chloride (CPC), sodium salicylate (SS), imidazole (IMI), acetaminophen (ACT) and nicotinamide (NIC). The eyes were scored according to the draize scoring. Blood collected from the treated rabbit were analyzed for haematological and biochemical parameters. After sacrifice, histological analysis of the eye and analysis of pro-inflammatory biomarkers (IL-1α, IL-1β, IL-8 and TNF-α) in the cornea using ELISA was carried out. Spleen was collected and the proliferation capacities of spleenocytes were analyzed. Liver and brain were collected and assessed for oxidative stress. The eye irritation potential of the chemicals was evident from the redness and swelling of the conjunctiva and cornea. Histopathological analysis and ELISA assay showed signs of inflammation in the eye. However, the haematological and biochemical parameters showed no change. Spleenocyte proliferations showed only slight alterations which were not significant. Also oxidative stress in the brain and liver were negligible. In conclusion, chemicals which cause ocular irritation and inflammation did not show any systemic side-effects in the present scenario.

Characterization of new eye drops with choline salicylate and assessment of their irritancy by in vitro short time exposure tests

The aim of our study was to examine the irritation potential of new eye drops containing 2% choline salicylate (CS) as an active pharmaceutical ingredient (API) and various polymers increasing eye drop viscosity (hydroxyethylcellulose, hydroxypropyl methylcellulose, methylcellulose, polyvinyl alcohol, polyvinylpyrrolidone). The standard method for assessing the potential of irritating substances has been the Draize rabbit eye test. However the European Centre for Validation of Alternative Methods and the Coordinating Committee for Validation of Alternative Methods recommend, short time exposure (STE) in vitro tests as an alternative method for assessing eye irritation. The eye irritation potential was determined using cytotoxicity test methods for rabbit corneal cell line (SIRC) after 5 min exposure. The viability of cells was determined using two cytotoxicity assays: MTT and Neutral Red Uptake. According to the irritation rankings for the short time exposure test, all tested eye drops are classified as non-irritating (cell viability >70%).

Retrospective analysis of the Draize test for serious eye damage/eye irritation: importance of understanding the in vivo endpoints under UN GHS/EU CLP for the development and evaluation of in vitro test methods

For more than two decades, scientists have been trying to replace the regulatory in vivo Draize eye test by in vitro methods, but so far only partial replacement has been achieved. In order to better understand the reasons for this, historical in vivo rabbit data were analysed in detail and resampled with the purpose of (1) revealing which of the in vivo endpoints are most important in driving United Nations Globally Harmonized System/European Union Regulation on Classification, Labelling and Packaging (UN GHS/EU CLP) classification for serious eye damage/eye irritation and (2) evaluating the method’s within-test variability for proposing acceptable and justifiable target values of sensitivity and specificity for alternative methods and their combinations in testing strategies. Among the Cat 1 chemicals evaluated, 36–65 % (depending on the database) were classified based only on persistence of effects, with the remaining being classified mostly based on severe corneal effects. Iritis was found to rarely drive the classification (<4 % of both Cat 1 and Cat 2 chemicals). The two most important endpoints driving Cat 2 classification are conjunctiva redness (75–81 %) and corneal opacity (54–75 %). The resampling analyses demonstrated an overall probability of at least 11 % that chemicals classified as Cat 1 by the Draize eye test could be equally identified as Cat 2 and of about 12 % for Cat 2 chemicals to be equally identified as No Cat. On the other hand, the over-classification error for No Cat and Cat 2 was negligible (<1 %), which strongly suggests a high over-predictive power of the Draize eye test. Moreover, our analyses of the classification drivers suggest a critical revision of the UN GHS/EU CLP decision criteria for the classification of chemicals based on Draize eye test data, in particular Cat 1 based only on persistence of conjunctiva effects or corneal opacity scores of 4. In order to successfully replace the regulatory in vivo Draize eye test, it will be important to recognise these uncertainties and to have in vitro tools to address the most important in vivo endpoints identified in this paper.

Definition of the applicability domain of the Short Time Exposure (STE) test for predicting the eye irritation of chemicals

The Short Time Exposure (STE) test is a simple and easy-to-perform in vitro eye irritation test, that uses the viability of SIRC cells (a rabbit corneal cell line) treated for five minutes as the endpoint. In this study, our goal was to define the applicability domain of the STE test, based on the results obtained with a set of 113 substances. To achieve this goal, chemicals were selected to represent both different chemical classes and different chemical properties, as well as to cover, in a balanced manner, the categories of eye irritation potential according to the Globally Harmonised System (GHS). Accuracy analysis indicated that the rates of false negatives for organic/inorganic salts (75.0%), hydrocarbons (33.3%) and alcohols (23.5%) were high. Many of the false negative results were for solid substances. It is noteworthy that no surfactant resulted in a false negative result in the STE test. Further examination of the physical property data and performance showed a significant improvement in the predictive accuracy, when substances with vapour pressures over 6kPa were excluded from the analyses. Our results indicate that several substances - i.e. certain solids such as salts, alcohols, hydrocarbons, and volatile substances with a vapour pressure over 6kPa - do not fall within the applicability domain of the STE test. Overall, we are encouraged by the performance and improved accuracy of the STE test.

Second-phase validation study of short time exposure test for assessment of eye irritation potency of chemicals

A Short Time Exposure (STE) test is a cytotoxicity test that uses SIRC cells (rabbit corneal cell line) to assess eye irritation potency following a 5-min chemical exposure. This second-phase validation study assessed the predictive capacity of the STE test using 40 coded test substances at three laboratories. A Validation Management Team (VMT) then evaluated the predictivity of the STE test for United Nation (UN) Globally Harmonized System (GHS) categories using 63 test substances including the results of the first-phase validation study. The STE test can assess not only the severe or corrosive ocular irritants (corresponding to the UN GHS Category 1) but also non-irritant (corresponding to UN GHS Non Category) from other toxicity classes, especially for limited types of test substances. The predictivity by STE test, however, was insufficient for identification of UN GHS categories (Category 1, Category 2, or Non Category). These results suggest that the STE test can be recommended as an initial step in a top-down approach to identification of severe irritants and test substances that require classification for eye irritation (UN GHS Category 1) as well as an initial step in a bottom-up approach to identification of test substances that do not require classification for eye irritation (UN GHS Non Category) from other toxicity classes, especially for limited types of test substances. On the other hand, the STE test is not considered adequate for the identification of mild or moderate irritants (i.e., UN GHS Categories 2A and 2B) and severe irritants (UN GHS Category 1).