Report from the EPAA workshop: In vitro ADME in safety testing used by EPAA industry sectors

Metabolism of alcohol ethoxylates (AEs) in rat, hamster, and human hepatocytes and liver S9: a pilot study for metabolic stability, metabolic pathway, and metabolites identification in vitro and in silico

Alcohol ethoxylates (AEs) are a well-known class of non-ionic surfactants widely used by the personal care market. The aim of this study was to evaluate and characterize the in vitro metabolism of AEs and identify metabolites. Five selected individual homologue AEs (C8EO4, C10EO5, C12EO4, C16EO8, and C18EO3) were incubated using human, rat, and hamster liver S9 fraction and cryopreserved hepatocytes. LC-MS was used to identify metabolites following the incubation of AEs by liver S9 and hepatocytes of all three species. All AEs were metabolized in these systems with a half-life ranging from 2 to 139 min. In general, incubation of AE with human liver S9 showed a shorter half-life compared to rat liver S9. While rat hepatocytes metabolized AEs faster than human hepatocytes. Both hydrophobic alkyl chain and hydrophilic EO head group groups of AEs were found to be target sites of metabolism. Metabolites were identified that show primary hydroxylation and dehydrogenation, followed by O-dealkylation (shortening of EO head groups) and glucuronidation. Additionally, the detection of whole EO groups indicates the cleavage of the ether bond between the alkyl chain and the EO groups as a minor metabolic pathway in the current testing system. Furthermore, no difference in metabolic patterns of each individual homologue AE investigated was observed, regardless of alkyl chain length or the number of EO groups. Moreover, there is an excellent agreement between the in vitro experimental data and the metabolite profile simulations using in silico approaches (OECD QSAR Toolbox). Altogether, these data indicate fast metabolism of all AEs with a qualitatively similar metabolic pathway with some quantitative differences observed in the metabolite profiles. These metabolic studies using different species can provide important reference values for further safety evaluation.

Development of a hierarchical support vector regression-based in silico model for the prediction of the cysteine depletion in DPRA

Topical and transdermal treatments have been dramatically growing recently and it is crucial to consider skin sensitization during the drug discovery and development process for these administration routes. Various tests, including animal and non-animal approaches, have been devised to assess the potential for skin sensitization. Furthermore, numerous in silico models have been created, providing swift and cost-effective alternatives to traditional methods such as in vivo, in vitro, and in chemico methods for categorizing compounds. In this study, a quantitative structure-activity relationship (QSAR) model was developed using the innovative hierarchical support vector regression (HSVR) scheme. The aim was to quantitatively predict the potential for skin sensitization by analyzing the percent of cysteine depletion in Direct Peptide Reactivity Assay (DPRA). The results demonstrated accurate, consistent, and robust predictions in the training set, test set, and outlier set. Consequently, this model can be employed to estimate skin sensitization potential of novel or virtual compounds.

Development of chemometric-assisted supercritical fluid extraction of effective and natural tyrosinase inhibitor from Syzygium aqueum leaves

Tyrosinase is a key enzyme in enzymatic browning, causing quality losses in food through the oxidation process. Thus, the discovery of an effective and natural tyrosinase inhibitor via green technology is of great interest to the global food market due to food security and climate change issues. In this study, Syzygium aqueum (S. aqueum) leaves, which are known to be rich in phenolic compounds (PC), were chosen as a natural source of tyrosinase inhibitor, and the effect of the sustainable, supercritical fluid extraction (SFE) process was evaluated. Response surface methodology-assisted supercritical fluid extraction (RSM-assisted SFE) was utilized to optimize the PCs extracted from S. aqueum. The highest amount of PC was obtained at the optimum conditions (55 °C, 3350 psi, and 70 min). The IC50 (661.815 μg/mL) of the optimized extract was evaluated, and its antioxidant activity (96.8 %) was determined. Gas chromatography-mass spectrometry (GC-MS) results reveal that 2',6'-dihydroxy-4'-methoxychalcone (2,6-D4MC) (82.65 %) was the major PC in S. aqueum. Chemometric analysis indicated that 2,6-D4MC has similar chemical properties to the tyrosinase inhibitor control (kaempferol). The toxicity and physiochemical properties of the novel 2,6-D4MC from S. aqueum revealed that the 2,6-D4MC is safer than kaempferol as predicted via absorption, distribution, metabolism, and excretion (ADME) evaluation. Enzyme kinetic analysis shows that the type of inhibition of the optimized extract is non-competitive inhibition with Km = 1.55 mM and Vmax = 0.017 μM/s. High-performance liquid chromatography (HPLC) analysis shows the effectiveness of S. aqueum as a tyrosinase inhibitor. The mechanistic insight of the tyrosinase inhibition using 2,6-D4MC was successfully calculated using density functional theory (DFT) and molecular docking approaches. The findings could have a significant impact on food security development by devising a sustainable and effective tyrosinase inhibitor from waste by-products that is aligned with the United Nation's SDG 2, zero hunger.

Assessment of the Intestinal Absorption of Higher Olefins by the Everted Gut Sac Model in Combination with In Silico New Approach Methodologies

To reduce the number of animals and studies needed to fulfill the information requirements as required by Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) (EC no. 1907/2006), a read-across approach was used to support approximately 30 higher olefins. This study aimed to assess the absorption potential of higher olefins through the gut wall as the experimentally determined bioavailability which would strengthen the read-across hypothesis and justification, reducing the need for toxicity studies on all of the higher olefins. The absorption potential of a series of higher olefins (carbon range from 6 to 28, with five configurations of the double bond) was determined in the in vitro everted rat small intestinal sac model and subsequently ranked. In addition, in silico approaches were applied to predict the reactivity, lipophilicity, and permeability of higher olefins. In the in vitro model, everted sacs were incubated in “fed-state simulated small intestinal fluid” saturated with individual higher olefins. The sac contents were then collected, extracted, and analyzed for olefin content using gas chromatography with a flame ionization detector. The C6 to C10 molecules were readily absorbed into the intestinal sacs. Marked inter-compound differences were observed, with the amount of absorption generally decreasing with the increase in carbon number. Higher olefins with ≥C14 carbons were either not absorbed or very poorly absorbed. In the reactivity simulation study, the reactivity is well described by the position of the double bond rather than the number of carbon atoms. In the lipophilicity and permeability analysis, both parameter descriptors depend mainly on the number of carbon atoms and less on the position of the double bond. In conclusion, these new approach methodologies provide supporting information on any trends or breakpoints in intestinal uptake and a hazard matrix based on carbon number and position of the double bond. This matrix will further assist in the selection of substances for inclusion in the mammalian toxicity testing programme.

Alternative Methods to Animal Testing for the Safety Evaluation of Cosmetic Ingredients: An Overview

The safety of cosmetics sold in Europe is based on the safety evaluation of each individual ingredient conducted by those responsible for putting the product on the market. However, those substances for which some concern exists with respect to human health (e.g., colorants, preservatives, UV-filters, nanomaterials) are evaluated at the European Commission level by a scientific committee, currently called the Scientific Committee on Consumer Safety (SCCS). According to the Cosmetics Regulation (European Commission, 2009), it is prohibited in the European Union (EU) to market cosmetic products and ingredients that have been tested on animals. However, the results of studies performed before the ban continue to be accepted. In the current study, we evaluated the use of in vitro methods in the dossiers submitted to the SCCS in the period between 2013 and 2016 based on the published reports issued by the scientific committee, which provides a scientific opinion on these dossiers. The results of this evaluation were compared with those of an evaluation conducted four years previously. We found that, despite a slight increase in the number of studies performed in vitro, the majority of studies submitted to the SCCS is still done principally in vivo and correspond to studies performed before the ban.

Insights on in vitro models for safety and toxicity assessment of cosmetic ingredients

According to the current European legislation, the safety assessment of each individual cosmetic ingredient of any formulation is the basis for the safety evaluation of a cosmetic product. Also, animal testing in the European Union is prohibited for cosmetic ingredients and products since 2004 and 2009, respectively. Additionally, the commercialization of any cosmetic products containing ingredients tested on animal models was forbidden in 2009. In consequence of these boundaries, the European Centre for the Validation of Alternative Methods (ECVAM) proposes a list of validated cell-based in vitro models for predicting the safety and toxicity of cosmetic ingredients. These models have been demonstrated as valuable and effective tools to overcome the limitations of animal in vivo studies. Although the use of in vitro cell-based models for the evaluation of absorption and permeability of cosmetic ingredients is widespread, a detailed study on the properties of these platforms and the in vitro-in vivo correlation compared with human data are required. Moreover, additional efforts must be taken to develop in vitro models to predict carcinogenicity, repeat dose toxicity and reproductive toxicity, for which no alternative in vitro methods are currently available. This review paper summarizes and characterizes the most relevant in vitro models validated by ECVAM employed to predict the safety and toxicology of cosmetic ingredients.

Alternative approaches for identifying acute systemic toxicity: Moving from research to regulatory testing

Acute systemic toxicity testing provides the basis for hazard labeling and risk management of chemicals. A number of international efforts have been directed at identifying non-animal alternatives for in vivo acute systemic toxicity tests. A September 2015 workshop, Alternative Approaches for Identifying Acute Systemic Toxicity: Moving from Research to Regulatory Testing, reviewed the state-of-the-science of non-animal alternatives for this testing and explored ways to facilitate implementation of alternatives. Workshop attendees included representatives from international regulatory agencies, academia, nongovernmental organizations, and industry. Resources identified as necessary for meaningful progress in implementing alternatives included compiling and making available high-quality reference data, training on use and interpretation of in vitro and in silico approaches, and global harmonization of testing requirements. Attendees particularly noted the need to characterize variability in reference data to evaluate new approaches. They also noted the importance of understanding the mechanisms of acute toxicity, which could be facilitated by the development of adverse outcome pathways. Workshop breakout groups explored different approaches to reducing or replacing animal use for acute toxicity testing, with each group crafting a roadmap and strategy to accomplish near-term progress. The workshop steering committee has organized efforts to implement the recommendations of the workshop participants.

Validation of Bioreactor and Human-on-a-Chip Devices for Chemical Safety Assessment

Equipment and device qualification and test assay validation in the field of tissue engineered human organs for substance assessment remain formidable tasks with only a few successful examples so far. The hurdles seem to increase with the growing complexity of the biological systems, emulated by the respective models. Controlled single tissue or organ culture in bioreactors improves the organ-specific functions and maintains their phenotypic stability for longer periods of time. The reproducibility attained with bioreactor operations is, per se, an advantage for the validation of safety assessment. Regulatory agencies have gradually altered the validation concept from exhaustive "product" to rigorous and detailed process characterization, valuing reproducibility as a standard for validation. "Human-on-a-chip" technologies applying micro-physiological systems to the in vitro combination of miniaturized human organ equivalents into functional human micro-organisms are nowadays thought to be the most elaborate solution created to date. They target the replacement of the current most complex models-laboratory animals. Therefore, we provide here a road map towards the validation of such "human-on-a-chip" models and qualification of their respective bioreactor and microchip equipment along a path currently used for the respective animal models.

Biotransformation in vitro: An essential consideration in the quantitative in vitro-to-in vivo extrapolation (QIVIVE) of toxicity data

Early consideration of the multiplicity of factors that govern the biological fate of foreign compounds in living systems is a necessary prerequisite for the quantitative in vitro-in vivo extrapolation (QIVIVE) of toxicity data. Substantial technological advances in in vitro methodologies have facilitated the study of in vitro metabolism and the further use of such data for in vivo prediction. However, extrapolation to in vivo with a comfortable degree of confidence, requires continuous progress in the field to address challenges such as e.g., in vitro evaluation of chemical-chemical interactions, accounting for individual variability but also analytical challenges for ensuring sensitive measurement technologies. This paper discusses the current status of in vitro metabolism studies for QIVIVE extrapolation, serving today's hazard and risk assessment needs. A short overview of the methodologies for in vitro metabolism studies is given. Furthermore, recommendations for priority research and other activities are provided to ensure further widespread uptake of in vitro metabolism methods in 21st century toxicology. The need for more streamlined and explicitly described integrated approaches to reflect the physiology and the related dynamic and kinetic processes of the human body is highlighted i.e., using in vitro data in combination with in silico approaches.

PBTK modelling platforms and parameter estimation tools to enable animal-free risk assessment: recommendations from a joint EPAA--EURL ECVAM ADME workshop

Information on toxicokinetics is critical for animal-free human risk assessment. Human external exposure must be translated into human tissue doses and compared with in vitro actual cell exposure associated to effects (in vitro-in vivo comparison). Data on absorption, distribution, metabolism and excretion in humans (ADME) could be generated using in vitro and QSAR tools. Physiologically-based toxicokinetic (PBTK) computer modelling could serve to integrate disparate in vitro and in silico findings. However, there are only few freely-available PBTK platforms currently available. And although some ADME parameters can be reasonably estimated in vitro or in silico, important gaps exist. Examples include unknown or limited applicability domains and lack of (high-throughput) tools to measure penetration of barriers, partitioning between blood and tissues and metabolic clearance. This paper is based on a joint EPAA--EURL ECVAM expert meeting. It provides a state-of-the-art overview of the availability of PBTK platforms as well as the in vitro and in silico methods to parameterise basic (Tier 1) PBTK models. Five high-priority issues are presented that provide the prerequisites for wider use of non-animal based PBTK modelling for animal-free chemical risk assessment.

Application of Gut Cell Models for Toxicological and Bioactivity Studies of Functional and Novel Foods

The concept of functional and novel foods undoubtedly bears great potential as an asset to human health. However, this very same quest for ever new bioactive ingredients calls for reliable and distinct risk assessment as they may be potentially hazardous to human health. Most of today's methodologies still rely on decades old routines of animal trials and use of tumor-derived cell lines. Since such methodologies are not in line with the actual processes in the human body and with the 3R (replacement, reduction, refinement) concept, the results are often unreliable and misleading. Therefore, in this paper we propose the utilization of available untransformed small intestinal cell lines derived from human and pig tissue of non-tumor origin and describe several available cell models of the gut that offer a functional, close resemblance with the in vivo environment.