A highly sensitive competitive enzyme immunoassay of broad specificity quantifying microcystins and nodularins in water samples

Immunoassay technology: Research progress in microcystin-LR detection in water samples

Increasing global warming and eutrophication have led to frequent outbreaks of cyanobacteria blooms in freshwater. Cyanobacteria blooms cause the death of aquatic and terrestrial organisms and have attracted considerable attention since the 19th century. Microcystin-LR (MC-LR) is one of the most typical cyanobacterial toxins. Therefore, the fast, sensitive, and accurate determination of MC-LR plays an important role in the health of humans and animals. Immunoassay refers to a method that uses the principle of immunology to determine the content of the tested substance in a sample using the tested substance as an antigen or antibody. In analytical applications, the immunoassay technology could use the specific recognition of antibodies for MC-LR detection. In this review, we firstly highlight the immunoassay detection of MC-LR over the past two decades, including classical enzyme-link immunosorbent assay (ELISA), modern immunoassay with optical signal, and modern immunoassay with electrical signal. Among these detection methods, the water environment was used as the main detection system. The advantages and disadvantages of the different detection methods were compared and analyzed, and the principles and applications of immunoassays in water samples were elaborated. Furthermore, the current challenges and developmental trends in immunoassay were systematically introduced to enhance MC-LR detection performance, and some critical points were given to deal with current challenges. This review provides novel insight into MC-LR detection based on immunoassay method.

Improving Biosensors by the Use of Different Nanomaterials: Case Study with Microcystins as Target Analytes

The eutrophication of lakes and rivers without adequate rainfall leads to excessive growth of cyanobacterial harmful algal blooms (CyanoHABs) that produce toxicants, green tides, and unpleasant odors. The rapid growth of CyanoHABs owing to global warming, climate change, and the development of rainforests and dams without considering the environmental concern towards lakes and rivers is a serious issue. Humans and livestock consuming the toxicant-contaminated water that originated from CyanoHABs suffer severe health problems. Among the various toxicants produced by CyanoHABs, microcystins (MCs) are the most harmful. Excess accumulation of MC within living organisms can result in liver failure and hepatocirrhosis, eventually leading to death. Therefore, it is essential to precisely detect MCs in water samples. To date, the liquid chromatography-mass spectrometry (LC-MS) and enzyme-linked immunosorbent assay (ELISA) have been the standard methods for the detection of MC and provide precise results with high reliability. However, these methods require heavy instruments and complicated operation steps that could hamper the portability and field-readiness of the detection system. Therefore, in order for this goal to be achieved, the biosensor has been attracted to a powerful alternative for MC detection. Thus far, several types of MC biosensor have been proposed to detect MC in freshwater sample. The introduction of material is a useful option in order to improve the biosensor performance and construct new types of biosensors. Introducing nanomaterials to the biosensor interface provides new phenomena or enhances the sensitivity. In recent times, different types of nanomaterials, such as metallic, carbon-based, and transition metal dichalcogenide-based nanomaterials, have been developed and used to fabricate biosensors for MC detection. This study reviews the recent advancements in different nanomaterial-based MC biosensors.

ELISA-Based Method for Variant-Independent Detection of Total Microcystins and Nodularins via a Multi-immunogen Approach

Required routine monitoring of microcystins (MCs) and nodularins (NODs) in water samples, as posed by U.S. EPA Unregulated Contaminant Monitoring Rule 4, demands cost-effective, reliable, and sensitive detection methods. To target as many MC and NOD variants as possible, we developed an indirect competitive enzyme-linked immunosorbent assay (ELISA) with group-specific monoclonal antibodies for variant-independent detection of total MCs and NODs. In this ELISA method, the mice monoclonal antibodies presenting both high affinities and broad-spectrum recognition capabilities against MCs and NODs were self-produced by designing MC hapten-based multi-immunogens to minimize specificity for the particular variant. Their high affinities and variant-independent binding capabilities against MCs and NODs were validated by both wet lab and in silico methods. The developed ELISA method achieved a limit of detection of below 0.3 μg/L for 13 MC/NOD variants, well with the reported best cross-reactivities of 60-127% relative to MC-LR. As a case study, this ELISA method was used to map the variations of intracellular and extracellular total MCs/NODs in the Luoma Lake drinking water source, China, in July, 2020. Its capability to measure total MCs/NODs with high sensitivity and high throughput in a simple and affordable way would truly be a disruptive technology capable of changing our understanding of bloom/toxin dynamics and having obvious implications for monitoring efforts.

Recent developments in the methods of quantitative analysis of microcystins

Cyanotoxins are produced by the toxic cyanobacterial species present in algal blooms formed in water bodies due to nutrient over-enrichment by human influences and natural environmental conditions. Extensive studies are available on the most widely encountered cyanotoxins, microcystins (MCs) in fresh and brackish water bodies. MC contaminated water poses severe risks to human health, environmental sustainability, and aquatic life. Therefore, commonly occurring MCs should be monitored. Occasionally, detection and quantification of these toxins are difficult due to the unavailability of pure standards. Enzymatic, immunological assays, and analytical techniques like protein phosphatase inhibition assay, enzyme-linked immunosorbent assay, high-performance liquid chromatography, liquid chromatography-mass spectrometry, and biosensors are used for their detection and quantification. There is no single method for the detection of all the different types of MCs; therefore, various techniques are often combined to yield reliable results. Biosensor development offered a problem-solving approach in the detection of MCs due to their high accuracy, sensitivity, rapid response, and portability. In this review, an endeavor has been made to uncover emerging techniques used for the detection and quantification of the MCs.

A Comprehensive Review: Development of Electrochemical Biosensors for Detection of Cyanotoxins in Freshwater

Cyanobacteria harmful algal blooms are increasing in frequency and cyanotoxins have become an environmental and public concern in the U.S. and worldwide. In this Review, the majority of reported studies and developments of electrochemical affinity biosensors for cyanotoxins are critically reviewed and discussed. Essential background information about cyanobacterial toxins and electrochemical biosensors is combined with the rapidly moving development of electrochemical biosensors for these toxins. Current issues and future challenges for the development of useful electrochemical biosensors for cyanotoxin detection that meet the demands for applications in field freshwater samples are discussed. The major aspects of the entire review article in a prescribed sequence include (i) the state-of-the-art knowledge of the toxicity of cyanotoxins, (ii) important harmful algal bloom events, (iii) advisories, guidelines, and regulations, (iv) conventional analytical methods for determination of cyanotoxins, (v) electrochemical transduction, (vi) recognition receptors, (vii) reported electrochemical biosensors for cyanotoxins, (viii) summary of analytical performance, and (ix) recent advances and future trends. Discussion includes electrochemical techniques and devices, biomolecules with high affinity, numerous array designs, various detection approaches, and research strategies in tailoring the properties of the transducer-biomolecule interface. Scientific and engineering aspects are presented in depth. This review aims to serve as a valuable source to scientists and engineers entering the interdisciplinary field of electrochemical biosensors for detection of cyanotoxins in freshwaters.

Structural Characterization and Absolute Quantification of Microcystin Peptides Using Collision-Induced and Ultraviolet Photo-Dissociation Tandem Mass Spectrometry

Microcystin (MC) peptides produced by cyanobacteria pose a hepatotoxic threat to human health upon ingestion from contaminated drinking water. While rapid MC identification and quantification in contaminated body fluids or tissue samples is important for patient treatment and outcomes, conventional immunoassay-based measurement strategies typically lack the specificity required for unambiguous determination of specific MC variants, whose toxicity can significantly vary depending on their structures. Furthermore, the unambiguous identification and accurate quantitation of MC variants using tandem mass spectrometry (MS/MS)-based methods can be limited due to a current lack of appropriate stable isotope-labeled internal standards. To address these limitations, we have systematically examined here the sequence and charge state dependence to the formation and absolute abundance of both "global" and "variant-specific" product ions from representative MC-LR, MC-YR, MC-RR, and MC-LA peptides, using higher-energy collisional dissociation (HCD)-MS/MS, ion-trap collision-induced dissociation (CID)-MS/MS and CID-MS³, and 193 nm ultraviolet photodissociation (UPVD)-MS/MS. HCD-MS/MS was found to provide the greatest detection sensitivity for both global and variant-specific product ions in each of the MC variants, except for MC-YR where a variant-specific product uniquely formed via UPVD-MS/MS was observed with the greatest absolute abundance. A simple methodology for the preparation and characterization of ¹⁸O-stable isotope-labeled MC reference materials for use as internal standards was also developed. Finally, we have demonstrated the applicability of the methods developed herein for absolute quantification of MC-LR present in human urine samples, using capillary scale liquid chromatography coupled with ultra-high resolution / accurate mass spectrometry and HCD-MS/MS. Graphical abstract ᅟ.

Transformation of microcystins to 2-methyl-3-methoxy-4-phenylbutyric acid by room temperature ozone oxidation for rapid quantification of total microcystins

Microcystins (MCs) are cyanobacterial hepatotoxins capable of accumulation into animal tissues. To determine the total microcystins in water, a novel analytical method, including ozonolysis, methylation of 2-methyl-3-methoxy-4-phenylbutyric acid (MMPB) with methylchloroformate (MCF) and gas chromatography mass spectrometry (GC-MS) detection was developed. The results show that MCs can be oxidized by ozone to produce MMPB at ambient temperature, proving ozonation is an effective, rapid and green method for the transformation of MCs to MMPB without secondary pollution. The oxidation conditions as well as the esterification process were optimized and, subsequently applied to analysis of environmental samples. The method shows wide linear range and high sensitivity with a detection limit of 0.34 μg L(-1). The established method was successfully applied to the analysis of microcystins in water samples.

Photolinker-free photoimmobilization of antibodies onto cellulose for the preparation of immunoassay membranes

Immunoassay membranes were produced by photoimmobilization of antibodies onto cellulose without any photocoupling intermediate nor any biomolecule or substrate pretreatment.

Photo-assisted inkjet printing of antibodies onto cellulose for the eco2-friendly preparation of immunoassay membranes

Immunoassay membranes were produced by inkjet printing and photolinker-free photoimmobilization of antibodies onto cellulose.

Multihapten approach leading to a sensitive ELISA with broad cross-reactivity to microcystins and nodularin

Microcystins (MCs) are a group of biotoxins (>150) produced by cyanobacteria, with a worldwide distribution. MCs are hepatotoxic, and acute exposure causes severe liver damage in humans and animals. Rapid and cheap methods of analysis are therefore required to protect people and livestock, especially in developing countries. To include as many MCs as possible in a single analysis, we developed a new competitive ELISA. Ovine polyclonal antibodies were raised using an immunogen made by conjugating a mixture of microcystins to cationised bovine serum albumin, and the plate-coating antigen was prepared by conjugating [Asp3]MC-RY to ovalbumin. This strategy was used also to minimize specificity for particular microcystin congeners. Cross-reactivity studies indicate that the ELISA has broad specificity to microcystins and also detects nodularin, providing a sensitive and rapid analytical method for screening large numbers of samples. The limit of quantitation for microcystins in drinking water is 0.04 μg/L, well below the WHO's maximum recommendation of 1 μg/L. The ELISA can be used for quantifying total microcystins in various matrices, including drinking water, cyanobacterial cultures, extracts, and algal blooms, and may be useful in detecting metabolites and conjugates of MCs.

Development of a real-time capacitive biosensor for cyclic cyanotoxic peptides based on Adda-specific antibodies

The harmful effects of cyanotoxins in surface waters have led to increasing demands for accurate early warning methods. This study proposes a capacitive immunosensor for broad-spectrum detection of the group of toxic cyclic peptides called microcystins (∼80 congeners) at very low concentration levels. The novel analytical platform offers significant advances compared to the existing methods. Monoclonal antibodies (mAbs, clone AD4G2) that recognize a common element of microcystins were used to construct the biosensing layer. Initially, a stable insulating anchor layer for the mAbs was made by electropolymerization of tyramine onto a gold electrode surface, with subsequent incorporation of gold nanoparticles (AuNPs) on the glutaraldehyde (5%) activated polytyramine surface. The biosensor responded linearly to microcystin concentrations from 1×10(-13)M to 1×10(-10)M MC-LR standard with a limit of detection of 2.1×10(-14)M. The stability of the biosensor was evaluated by repeated measurements of the antigen and by determining the capacitance change relative to the original response, which decreased below 90% after the 30th cycle.

Immunoassays and biosensors for the detection of cyanobacterial toxins in water

Algal blooms are a frequent phenomenon in nearly all kinds of fresh water. Global warming and eutrophication by waste water, air pollution and fertilizers seem to lead to an increased frequency of occurrence. Many cyanobacteria produce hazardous and quite persistent toxins, which can contaminate the respective water bodies. This may limit the use of the raw water for many purposes. The purification of the contaminated water might be quite costly, which makes a continuous and large scale treatment economically unfeasible in many cases. Due to the obvious risks of algal toxins, an online or mobile detection method would be highly desirable. Several biosensor systems have been presented in the literature for this purpose. In this review, their mode of operation, performance and general suitability for the intended purpose will be described and critically discussed. Finally, an outlook on current developments and future prospects will be given.

A simple and fast non-radioactive bridging immunoassay for insulin autoantibodies

Type 1 diabetes (T1D) is an autoimmune disease which results from the destruction of pancreatic beta cells. Autoantibodies directed against islet antigens are valuable diagnostic tools. Insulin autoantibodies (IAAs) are usually the first to appear and also the most difficult to detect amongst the four major islet autoantibodies. A non-radioactive IAA bridging ELISA was developed to this end. In this assay, one site of the IAAs from serum samples is bound to a hapten-labeled insulin (GC300-insulin), which is subsequently captured on anti-GC300 antibody-coated 96-well plates. The other site of the IAAs is bound to biotinylated insulin, allowing the complex to be detected by an enzyme-streptavidin conjugate. In the present study, 50 serum samples from patients with newly diagnosed T1D and 100 control sera from non-diabetic individuals were analyzed with our new assay and the results were correlated with an IAA radioimmunoassay (RIA). Using IAA bridging ELISA, IAAs were detected in 32 out of 50 T1D children, whereas with IAA RIA, 41 out of 50 children with newly diagnosed T1D were scored as positive. In conclusion, the IAA bridging ELISA could serve as an attractive approach for rapid and automated detection of IAAs in T1D patients for diagnostic purposes.

A new approach for quantitative analysis of L-phenylalanine using a novel semi-sandwich immunometric assay

Here, we describe a novel method for L-phenylalanine analysis using a sandwich-type immunometric assay approach for use as a new method for amino acid analysis. To overcome difficulties of the preparation of high-affinity and selectivity monoclonal antibodies against L-phenylalanine and the inability to use sandwich-type immunometric assays due to their small molecular weight, three procedures were examined. First, amino groups of L-phenylalanine were modified by "N-Fmoc-L-cysteine" (FC) residues and the derivative (FC-Phe) was used as a hapten. Immunization of mice with bovine serum albumin/FC-Phe conjugate successfully yielded specific monoclonal anti-FC-Phe antibodies. Second, a new derivatization reagent, "biotin linker conjugate of FC-Phe N-succinimidyl ester" (FC(Biotin)-NHS), was synthesized to convert L-phenylalanine to FC-(Biotin)-Phe as a hapten structure. The biotin moiety linked to the thiol group of cysteine formed a second binding site for streptavidin/horseradish peroxidase (HRP) conjugates for optical detection. Third, a new semi-sandwich-type immunometric assay was established using pre-derivatized L-phenylalanine, the monoclonal anti-FC-Phe antibody, and streptavidin/HRP conjugate (without second antibody). Using the new "semi-sandwich" immunometric assay system, a detection limit of 35 nM (60 amol per analysis) and a detection range of 0.1-20 μM were attained using a standard L-phenylalanine solution. Rat plasma samples were analyzed to test reliability. Intra-day assay precision was within 6% of the coefficient of variation; inter-day variation was 0.1%. The recovery rates were from 92.4 to 123.7%. This is the first report of the quantitative determination of L-phenylalanine using a reliable semi-sandwich immunometric assay approach and will be applicable to the quantitative determination of other amino acids.

Highly sensitive and rapid detection of microcystin-LR in source and finished water samples using cantilever sensors

Microcystin-leucine-arginine (MCLR) is one of the toxic microcystin congeners produced by the common cyanobacteria, blue-green algae. A piezoelectric-excited millimeter-sized cantilever (PEMC) sensor was developed for the sensitive detection of MCLR in a flow format using both monoclonal and polyclonal antibodies that bind specifically to MCLR. PEMC is a resonant cantilever sensor whose resonant frequency decreases as target analyte binds to its surface. Monoclonal antibody against MCLR was immobilized on the sensor surface via amine coupling. As the toxin in the sample water bound to the antibody, resonant frequency decreased proportional to toxin concentration. Three water matrices, namely buffer, tap water, and river water, were spiked with MCLR standards and were successfully detected in the dynamic range of 1 pg/mL to 100 ng/mL (effective concentration -250 fg/mL to 25 ng/mL). The sensor response was characterized by a log-linear relationship between resonant frequency change and MCLR concentration. Positive verification of MCLR detection was confirmed by a sandwich binding on the sensor with a second antibody binding to MCLR on the sensor (attached in first detection step) which caused a further resonant frequency decrease. We show for the first time that MCLR in various water samples can be detected at 1 pg/mL.

A fluorescent immunochromatographic test using immunoliposomes for detecting microcystins and nodularins

Microcystins (MCs), a group of cyclic heptapeptides produced by common cyanobacteria (blue green algae), cause both acute and chronic toxicity. Due to their toxicity, constant monitoring in drinking water, recreational waters as well as other potential exposure through ingestion of contaminated sea food, is very important. In this context, an immunochromatographic test (ICT) using a monoclonal antibody labeled with fluorescent liposomes (immunoliposomes) as tracer was developed, allowing a rapid and simple detection of a large number of MC and nodularin variants in field samples. The present ICT using immunoliposomes proved to be ten times more sensitive than the ICT using colloidal gold for labeling. To achieve quantitative measurement, this ICT was improved by including a stable signal on the control band allowing the expression of the results as a ratio of the fluorescence signals of the specific band versus the control band (SB/CB). Very low concentrations of MC-LR were detected in the analysis buffer (0.06 ng/ml), well below the guideline value of 1 ng/ml proposed by the World Health Organization (WHO), with a dynamic range from 0.06 to 1.5 ng/ml of MC-LR. This method was also validated using a hand-held commercial fluorometer (from ESE), providing the same performances obtained via the analysis station (from Kodak) used in our laboratory. Repeatability tests performed with both devices showed good accuracy (CV < 13%). Furthermore, quantification of MCs in natural samples (water bloom and Microcystis culture) was achieved using ICT, leading to similar results obtained via an EIA previously described. All these results demonstrate that this new fluorescent ICT could be used not only as a sensitive detection tool but also to quantify MCs in field samples.

Facile and rapid access to linear and truncated microcystin analogues for the implementation of immunoassays

A series of simplified microcystin-LR analogues based on Adda [(2S,3S,8S,9S,4E,6E)-3-amino-9-methoxy-2,6,8-trimethyl-10-phenyldecadienoic acid] or its corresponding aldol precursor linked to a polypeptide moiety have been synthesised and assessed for their binding affinity by the monoclonal antibody mAb MC159, an anti-microcystin-LR mAb recently selected by us for the detection of microcystins through various immunoassay formats. Some modifications have been brought to the enantiospecific synthesis of N-Boc-Adda developed by Pearson et al. (Org. Lett., 2000, 2, 2901) which enabled us to access in an economical and time-saving manner a small library of MC-LR linear analogues. Among which Adda was chosen to synthesise, as an illustrative example, a fluorescent probe derived from this beta-amino acid. This probe was subsequently solid-phase immobilised by means of oxime ligation in order to lead to biochips suitable for microcystin detection through the SPIT-FRI method.