Capillary-based immunoassays, immunosensors and DNA sensors – steps towards integration and multi-analysis

Quantification of CRP in human serum using a handheld fluorescence detection system for capillary-based ELISA

We developed a handheld fluorescence detection system for capillary-based enzyme-linked immunosorbent assay (ELISA). The detection system implements both a long-pass filter and perpendicular optical arrangement, i.e., a power LED and a palm-sized spectrometer, to minimize background signals from the excitation light and optical scattering. The lower detection limit for resorufin was 0.13 μM. The detection system was applied to the quantification of C-reactive protein (CRP) in human serum with a capillary-based ELISA. The lower detection limit for CRP was 31 ng/ml, and the observed CRP levels in human serum were comparable to those obtained with a conventional ELISA system.

Acoustofluidics-Assisted Engineering of Multifunctional Three-Dimensional Zinc Oxide Nanoarrays

The integration of acoustics and microfluidics (termed acoustofluidics) presents a frontier in the engineering of functional micro-/nanomaterials. Acoustofluidic techniques enable active and precise spatiotemporal control of matter, providing great potential for the design of advanced nanosystems with tunable material properties. In this work, we introduce an acoustofluidic approach for engineering multifunctional three-dimensional nanostructure arrays and demonstrate their potential in enrichment and biosensing applications. In particular, our acoustofluidic device integrates an acoustic transducer with a sharp-edge-based acoustofluidic reactor that enables uniform patterning of zinc oxide (ZnO) nanoarrays with customizable lengths, densities, diameters, and other properties. The resulting ZnO nanoarray-coated glass capillaries can rapidly and efficiently capture and enrich biomolecules with sizes ranging from a few nanometers to several hundred nanometers. In order to enable the detection of these biomolecules, silver (Ag) nanoparticles are deposited onto the ZnO nanoarrays, and the integrated ZnO-Ag capillary device functions as a label-free plasmonic biosensing system for surface-enhanced Raman spectroscopy (SERS) based detection of exosomes, DNA oligonucleotides, and E. coli bacteria. The optical sensing enhancement of ZnO-Ag capillary is further validated through finite-difference time-domain (FDTD) simulations. These findings not only provide insights into the engineering of functional micro/nanomaterials using acoustofluidics but also shed light onto the development of portable microanalytical devices for point-of-care applications.

Multiplex immunoassays using surface modification-mediated porous layer open tubular capillary

We proposed an innovative surface modification-mediated porous layer open tubular (PLOT) capillary, which was modified via an in situ biphasic reaction. This capillary comprised three-dimensional homogeneous and porous structures, which could increase the surface-area-to-volume ratio for antibody immobilization. The PLOT capillary was shown as an ideal immunoreaction base to enhance the sensitivity of immunoassays and shorten analysis time. By connecting two separate PLOT capillaries using a suitable sleeve tube, we can perform multiplex targets detection in the same sample. We developed a sensitive, rapid, and multiplex PLOT capillary-mediated immunosensor for the simultaneous identification of alpha fetoprotein (AFP) and carcinoembryonic antigen (CEA) in clinical serum samples with good accuracy. The detection sensitivity of the PLOT immunosensor improved by 10-fold compared with that of bare-capillary sensor, and the whole analysis could be completed within 1 h. This work suggest that suitable surface modification strategy is an effective tool to improve the analytical performance of conventional immunoassay and our study provided a feasible, sensitive, and multi-target assay for the detection of cancer biomarkers, which would be of valuable application in clinical diagnosis.

Discerning Trends in Multiplex Immunoassay Technology with Potential for Resource-Limited Settings

BACKGROUND

In the search for more powerful tools for diagnoses of endemic diseases in resource-limited settings, we have been analyzing technologies with potential applicability. Increasingly, the process focuses on readily accessible bodily fluids combined with increasingly powerful multiplex capabilities to unambiguously diagnose a condition without resorting to reliance on a sophisticated reference laboratory. Although these technological advances may well have important implications for the sensitive and specific detection of disease, to date their clinical utility has not been demonstrated, especially in resource-limited settings. Furthermore, many emerging technological developments are in fields of physics or engineering, which are not readily available to or intelligible to clinicians or clinical laboratory scientists.

CONTENT

This review provides a look at technology trends that could have applicability to high-sensitivity multiplexed immunoassays in resource-limited settings. Various technologies are explained and assessed according to potential for reaching relevant limits of cost, sensitivity, and multiplex capability. Frequently, such work is reported in technical journals not normally read by clinical scientists, and the authors make enthusiastic claims for the potential of their technology while ignoring potential pitfalls. Thus it is important to draw attention to technical hurdles that authors may not be publicizing.

SUMMARY

Immunochromatographic assays, optical methods including those involving waveguides, electrochemical methods, magnetorestrictive methods, and field-effect transistor methods based on nanotubes, nanowires, and nanoribbons reveal possibilities as next-generation technologies.

A simple device for multiplex ELISA made from melt-extruded plastic microcapillary film

We present a simple device for multiplex quantitative enzyme-linked immunosorbant assays (ELISA) made from a novel melt-extruded microcapillary film (MCF) containing a parallel array of 200 μm capillaries along its length. To make ELISA devices different protein antigens or antibodies were immobilised inside individual microcapillaries within long reels of MCF extruded from fluorinated ethylene propylene (FEP). Short pieces of coated film were cut and interfaced with a pipette, allowing sequential uptake of samples and detection solutions into all capillaries from a reagent well. As well as being simple to produce, these FEP MCF devices have excellent light transmittance allowing direct optical interrogation of the capillaries for simple signal quantification. Proof of concept experiments demonstrate both quantitative and multiplex assays in FEP MCF devices using a standard direct ELISA procedure and read using a flatbed scanner. This new multiplex immunoassay platform should find applications ranging from lab detection to point-of-care and field diagnostics.

Biosensors for diagnostic applications

Biosensors combine a transducer with a biorecognition element and thus are able to transform a biochemical event on the transducer surface directly into a measurable signal. By this they have the potential to provide rapid, real-time, and accurate results in a comparatively easy way, which makes them promising analytical devices. Since the first biosensor was introduced in 1962 as an "enzyme electrode" for monitoring glucose in blood, medical applications have been the main driving force for further biosensor development. In this chapter we outline potential biosensor setups, focusing on transduction principles, biorecognition layers, and biosensor test formats, with regard to potential applications. A summary of relevant aspects concerning biosensor integration in efficient analytical setups is included. We describe the latest applications of biosensors in diagnostic applications focusing on detection of molecular biomarkers in real samples. An overview of the current state and future trends of biosensors in this field is given.

Optoelectronic capillary sensors in microfluidic and point-of-care instrumentation

This paper presents a review, based on the published literature and on the authors' own research, of the current state of the art of fiber-optic capillary sensors and related instrumentation as well as their applications, with special emphasis on point-of-care chemical and biochemical sensors, systematizing the various types of sensors from the point of view of the principles of their construction and operation. Unlike classical fiber-optic sensors which rely on changes in light propagation inside the fiber as affected by outside conditions, optical capillary sensors rely on changes of light transmission in capillaries filled with the analyzed liquid, which opens the possibility of interesting new applications, while raising specific issues relating to the construction, materials and instrumentation of those sensors.