Aqueous normal-phase chromatography using silica-hydride-based stationary phases

Design of Experiment (DoE) for Optimization of HPLC Conditions for the Simultaneous Fractionation of Seven α-Amylase/Trypsin Inhibitors from Wheat (Triticum aestivum L.)

Wheat alpha-amylase/trypsin inhibitors remain a subject of interest considering the latest findings showing their implication in wheat-related non-celiac sensitivity (NCWS). Understanding their functions in such a disorder is still unclear and for further study, the need for pure ATI molecules is one of the limiting problems. In this work, a simplified approach based on the successive fractionation of ATI extracts by reverse phase and ion exchange chromatography was developed. ATIs were first extracted from wheat flour using a combination of Tris buffer and chloroform/methanol methods. The separation of the extracts on a C18 column generated two main fractions of interest F1 and F2. The response surface methodology with the Doehlert design allowed optimizing the operating parameters of the strong anion exchange chromatography. Finally, the seven major wheat ATIs namely P01083, P17314, P16850, P01085, P16851, P16159, and P83207 were recovered with purity levels (according to the targeted LC-MS/MS analysis) of 98.2 ± 0.7; 98.1 ± 0.8; 97.9 ± 0.5; 95.1 ± 0.8; 98.3 ± 0.4; 96.9 ± 0.5, and 96.2 ± 0.4%, respectively. MALDI-TOF-MS analysis revealed single peaks in each of the pure fractions and the mass analysis yielded deviations of 0.4, 1.9, 0.1, 0.2, 0.2, 0.9, and 0.1% between the theoretical and the determined masses of P01083, P17314, P16850, P01085, P16851, P16159, and P83207, respectively. Overall, the study allowed establishing an efficient purification process of the most important wheat ATIs. This paves the way for further in-depth investigation of the ATIs to gain more knowledge related to their involvement in NCWS disease and to allow the absolute quantification in wheat samples.

Dispersive liquid-liquid microextraction, an effective tool for the determination of synthetic cannabinoids in oral fluid by liquid chromatography-tandem mass spectrometry

In the present work, dispersive liquid-liquid microextraction (DLLME) was used to extract six synthetic cannabinoids (JWH-018, JWH-019, JWH-073, JWH-200, or WIN 55,225, JWH-250, and AM-694) from oral fluids. A rapid baseline separation of the analytes was achieved on a bidentate octadecyl silica hydride phase (Cogent Bidentate C₁₈; 4.6 mm × 250 mm, 4 μm) maintained at 37 °C, by eluting in isocratic conditions (water:acetonitrile (25:75, V/V)). Detection was performed using positive electrospray ionization-tandem mass spectrometry. The parameters affecting DLLME (pH and ionic strength of the aqueous phase, type and volume of the extractant and dispersive solvent, vortex and centrifugation time) were optimized for maximizing yields. In particular, using 0.5 mL of oral fluid, acetonitrile (1 mL), was identified as the best option, both as a solvent to precipitate proteins and as a dispersing solvent in the DLLME procedure. To select an extraction solvent, a low transition temperature mixture (LTTM; composed of sesamol and chlorine chloride with a molar ratio of 1:3) and dichloromethane were compared; the latter (100 μL) was proved to be a better extractant, with recoveries ranging from 73% to 101 % by vortexing for 2 min. The method was validated according to the guidelines of Food and Drug Administration bioanalytical methods: intra-day and inter-day precisions ranged between 4 % and 18 % depending on the spike level and analyte; limits of detection spanned from 2 to 18 ng/mL; matrix-matched calibration curves were characterized by determination coefficients greater than 0.9914. Finally, the extraction procedure was compared with previous methods and with innovative techniques, presenting superior reliability, rapidity, simplicity, inexpensiveness, and efficiency.

Evaluating novel silica hydride-based stationary phases for the analysis of phytocannabinoids and other psychoactive drugs

Three silica hydride based novel chromatographic phases chemically-bonded with allyloxy-DL-alpha-tocopherol, allylpentafluorophenyl, and 1-eicosene moieties were evaluated as separation media for selected phytocannabinoids and other substances of abuse. In order to assess column selectivity, a series of reference standards was analyzed and detected by using liquid chromatography with mass spectrometry. Further, quantitative detections of cannabidiol and tetrahydrocannabinol were attempted for the extracts of cannabis plants and cannabidiol gummy formulation. For potential bioanalytical applications, the columns were evaluated for substance screening in a human urine matrix. In summary, the newly developed columns are functional and effective for the analysis of phytocannabinoids and various psychoactive drugs with or without the presence of biological matrices.

Origin of the selectivity differences of aromatic alcohols and amines of different n-alkyl chain length separated with perfluorinated C8 and bidentated C8 modified silica hydride stationary phases

Perfluorinated C8-(PerfluoroC8) and bidentate anchored C8-(BDC8)-modified silica hydride stationary phases have been employed for the isocratic separation of homologous phenylalkanols and phenylalkylamines differing in their n-alkyl chain length, using aqueous-acetonitrile (ACN) mobile phases of different ACN contents from 10 to 90% (v/v) in 10% increments. These analytes showed reversed-phase (RP) retention behaviour with mobile phases of <40% (v/v) ACN content with both stationary phases but with the BDC8 stationary phase providing longer retention. The PerfluoroC8, but not the BDC8, stationary phase also exhibited significant retention of these analytes under conditions typical of an aqueous normal phase (ANP) mode (i.e. with mobile phases of >80% (v/v) ACN content), with the analytes exhibiting overall U-shape retention dependencies on the ACN content of the mobile phase. Further, these stationary phases showed differences in their selectivity behaviour with regard to the n-alkyl chain lengths of the different analytes. These observations could not be explained in terms of pK _a , log P, molecular mass or linear solvation energy concepts. However, density functional theory (DFT) simulations provided a possible explanation for the observed selectivity trends, namely differences in the molecular geometries and structural organisation of the immobilised ligands of these two stationary phases under different solvational conditions. For mobile phase conditions favouring the RP mode, these DFT simulations revealed that interactions between adjacent BDC8 ligands occur, leading to a stationary phase with a more hydrophobic surface. Moreover, under mobile phase conditions favouring retention of the analytes in an ANP mode, these interactions of the bidentate-anchored C8 ligands resulted in hindered analyte access to potential ANP binding sites on the BDC8 stationary phase surface. With the PerfluoroC8 stationary phase, the DFT simulations revealed strong repulsion of individual perfluoroC8 ligand chains, with the perfluoroC8 ligands of this stationary phase existing in a more open brush-like state (and with a less hydrophobic surface) compared to the BDC8 ligands. These DFT simulation results anticipated the chromatographic findings that the phenylalkanols and phenylalkylamines had reduced retention in the RP mode with the PerfluoroC8 stationary phase. Moreover, the more open ligand structure of the PerfluoroC8 stationary phase enabled greater accessibility of the analytes to water solvated binding sites on the stationary phase surface under mobile phase conditions favouring an ANP retention mode, leading to retention of the analytes, particularly the smaller phenylalkylamines, via hydrogen bonding and electrostatic effects.

Plant Metabolomics: Maximizing Metabolome Coverage by Optimizing Mobile Phase Additives for Nontargeted Mass Spectrometry in Positive and Negative Electrospray Ionization Mode

Nontargeted screening methods with ultrahigh-performance liquid chromatography-electrospray ionization/quadrupole-time-of-flight mass spectrometry have been extensively applied to plant metabolomics to very diverse scientific issues in plant metabolomics. In this study, different mobile phase additives were tested in order to improve the electrospray ionization process and to detect as many metabolites as possible with high peak intensities in positive and negative ionization mode. Influences of modifiers were examined for nonpolar and polar compounds, as optimal conditions are not always the same. By combining different additives, metabolite coverage could be significantly increased. The best results for polar metabolites in positive ionization mode were achieved by using 0.1% acetic acid and 0.1% formic acid in negative ionization mode. For measurements of nonpolar metabolites in positive ionization mode, the application of 10 mmol/L ammonium formate led to the best findings, while the use of 0.02% acetic acid was more appropriate in negative ionization mode.

Investigations into the separation behaviour of perfluorinated C8 and undecanoic acid modified silica hydride stationary phases

In this study, the surface charge properties of perfluorinated C8 (PerfluoroC8) and undecanoic acid (UDA) modified silica hydride stationary phases have been investigated. The zeta potential values of these stationary phases were measured in aqueous/acetonitrile mobile phases of different pH, buffer concentrations and acetonitrile contents. The retention behaviour of several basic, acidic and neutral compounds were then examined with these two stationary phases, with U-shaped retention dependencies evident with regard to the organic solvent content of the mobile phase. Plots of the logarithmic retention factor versus buffer concentration revealed slopes ≥ -0.41 for both stationary phases, indicating the involvement of mixed mode retention mechanisms with contributions from both ionic and non-ionic interactions. Using a linear solvation energy relationship approach, the origins of these interactions under different mobile phase conditions were differentiated and quantified. The PerfluoroC8 stationary phase exhibited stronger retention for basic compounds under high acetonitrile content mobile phase conditions, whilst stronger retention was observed for all compounds with the UDA stationary phase under high aqueous content mobile phase conditions. The more negative zeta potentials of the UDA stationary phase correlated with higher total charge density, surface charge density and charge density at the beta plane (the outer plane of the double layer) compared to the PerfluoroC8 stationary phase. With mobile phases of low buffer concentrations, more negative zeta potential values were unexpectedly observed for the PerfluoroC8 stationary phase with slight increases in the C descriptor value, reflecting also the greater accessibility of the analytes to the stationary phase surface. Comparison of the retention behaviours on these phases with other types of silica hydride stationary phases has revealed different patterns of selectivity.

Ammonium fluoride as a mobile phase additive in aqueous normal phase chromatography

The use of ammonium fluoride as a mobile phase additive in aqueous normal phase chromatography with silica hydride-based stationary phases and mass spectrometry detection is evaluated. Retention times, peak shape, efficiency and peak intensity are compared to the more standard additives formic acid and ammonium formate. The test solutes were NAD, 3-hydroxyglutaric acid, α-ketoglutaric acid, p-aminohippuric acid, AMP, ATP, aconitic acid, threonine, N-acetyl carnitine, and 3-methyladipic acid. The column parameters are assessed in both the positive and negative ion detection modes. Ammonium fluoride is potentially an aggressive mobile phase additive that could have detrimental effects on column lifetime. Column reproducibility is measured and the effects of switching between different additives are also tested.

Silica, hybrid silica, hydride silica and non-silica stationary phases for liquid chromatography

Free silanols on the surface of silica are the "villains", which are responsible for detrimental interactions of those compounds and the stationary phase (i.e., bad peak shape, low efficiency) as well as low thermal and chemical stability. For these reasons, we began this review describing new silica and hybrid silica stationary phases, which have reduced and/or shielded silanols. At present, in liquid chromatography for the majority of analyses, reversed-phase liquid chromatography is the separation mode of choice. However, the needs for increased selectivity and increased retention of hydrophilic bases have substantially increased the interest in hydrophilic interaction chromatography (HILIC). Therefore, stationary phases and this mode of separation are discussed. Then, non-silica stationary phases (i.e., zirconium oxide, titanium oxide, alumina and porous graphitized carbon), which afford increased thermal and chemical stability and also selectivity different from those obtained with silica and hybrid silica, are discussed. In addition, the use of these materials in HILIC is also reviewed.

Recent progress in polar metabolite quantification in plants using liquid chromatography–mass spectrometry

Metabolite analysis or metabolomics is an important component of systems biology in the post-genomic era. Although separate liquid chromatography (LC) methods for quantification of the major classes of polar metabolites of plants have been available for decades, a single method that enables simultaneous determination of hundreds of polar metabolites is possible only with gas chromatography–mass spectrometry (GC–MS) techniques. The rapid expansion of new LC stationary phases in the market and the ready access of mass spectrometry in many laboratories provides an excellent opportunity for developing LC–MS based methods for multi-target quantification of polar metabolites. Although various LC–MS methods have been developed over the last 10 years with the aim to quantify one or more classes of polar compounds in different matrices, currently there is no consensus LC–MS method that is widely used in plant metabolomics studies. The most promising methods applicable to plant metabolite analysis will be reviewed in this paper and the major problems encountered highlighted. The aim of this review is to provide plant scientists, with limited to moderate experience in analytical chemistry, with up-to-date and simplified information regarding the current status of polar metabolite analysis using LC–MS techniques.

Analysis of thiopurines using aqueous normal phase chromatography

The chromatography of several thiopurines is investigated using aqueous normal phase (ANP) conditions in conjunction with a silica hydride-based column. Both isocratic and gradient elution modes are tested. Detection of higher concentration samples is done by UV to demonstrate feasibility in this format while lower concentration samples utilize mass spectrometry (MS). Repeatability of successive runs is also tested with particular attention to gradient methods where the equilibration time of the stationary phase can be evaluated.

Sub-2 μm fully porous and partially porous (core–shell) stationary phases for reversed phase liquid chromatography

The need for increased throughput and superior performance has increased the demand for stationary phases with improved kinetic performance.