Surface-modified electrodes in the mimicry of oxidative drug metabolism

Compact In Situ Electrochemical NMR with Wireless and Anti-interference Strategy in Multiscenario Applications

The integration of electrochemistry with nuclear magnetic resonance (NMR) spectroscopy recently offers a powerful approach to understanding oxidative metabolism, detecting reactive intermediates, and predicting biological activities. This combination is particularly effective as electrochemical methods provide excellent mimics of metabolic processes, while NMR spectroscopy offers precise chemical analysis. NMR is already widely utilized in the quality control of pharmaceuticals, foods, and additives and in metabolomic studies. However, the introduction of additional and external connections into the magnet has posed challenges, leading to signal deterioration and limitations in routine measurements. Herein, we report an anti-interference compact in situ electrochemical NMR system (AICISENS). Through a wireless strategy, the compact design allows for the independent and stable operation of electrochemical NMR components with effective interference isolation. Thus, it opens an avenue toward easy integration into in situ platforms, applicable not only to laboratory settings but also to fieldwork. The operability, reliability, and versatility were validated with a series of biomimetic assessments, including measurements of microbial electrochemical systems, functional foods, and simulated drug metabolisms. The robust performance of AICISENS demonstrates its high potential as a powerful analytical tool across diverse applications.

Electrochemistry/mass spectrometry (EC/MS) for fast generation and identification of novel reactive metabolites of two unsymmetrical bisacridines with anticancer activity

The development of a new drug requires knowledge about its metabolic fate in a living organism, regarding the comprehensive assessment of both drug therapeutic activity and toxicity profiles. Electrochemistry (EC) coupled with mass spectrometry (MS) is an efficient tool for predicting the phase I metabolism of redox-sensitive drugs. In particular, EC/MS represents a clear advantage for the generation of reactive drug transformation products and their direct identification compared to biological matrices. In this work, we focused on the characterization of novel electrochemical products of two representative unsymmetrical bisacridines (C-2028 and C-2045) with demonstrated high anticancer activity. The electrochemical thin-layer flow-through cell μ-PrepCell 2.0 (Antec Scientific) was used here for the effective metabolite electrosynthesis. The electrochemical simulation of C-2028 reductive and C-2045 oxidative metabolism resulted in the generation of new products that were not observed before. The formation of nitroso [M-O+H]+ and azoxy [2M-3O+H]+ species from C-2028, as well as a series of hydroxylated and/or dehydrogenated products, including possible quinones [M-2H+H]+ and [M+O-2H+H]+ from C-2045, was demonstrated. For the latter, a glutathione S-conjugate (m/z 935.3130) was also obtained in measurements supplemented with the excess of reduced glutathione. For the identification of the products of interest, structural confirmation based on MS/MS fragmentation experiments was performed. Novel products of electrochemical conversions of unsymmetrical bisacridines were discussed in the context of their possible biological effect on the human organism.

Electrochemical transformations catalyzed by cytochrome P450s and peroxidases

Cytochrome P450s (Cyt P450s) and peroxidases are enzymes featuring iron heme cofactors that have wide applicability as biocatalysts in chemical syntheses. Cyt P450s are a family of monooxygenases that oxidize fatty acids, steroids, and xenobiotics, synthesize hormones, and convert drugs and other chemicals to metabolites. Peroxidases are involved in breaking down hydrogen peroxide and can oxidize organic compounds during this process. Both heme-containing enzymes utilize active Fe^IVO intermediates to oxidize reactants. By incorporating these enzymes in stable thin films on electrodes, Cyt P450s and peroxidases can accept electrons from an electrode, albeit by different mechanisms, and catalyze organic transformations in a feasible and cost-effective way. This is an advantageous approach, often called bioelectrocatalysis, compared to their biological pathways in solution that require expensive biochemical reductants such as NADPH or additional enzymes to recycle NADPH for Cyt P450s. Bioelectrocatalysis also serves as an ex situ platform to investigate metabolism of drugs and bio-relevant chemicals. In this paper we review biocatalytic electrochemical reactions using Cyt P450s including C-H activation, S-oxidation, epoxidation, N-hydroxylation, and oxidative N-, and O-dealkylation; as well as reactions catalyzed by peroxidases including synthetically important oxidations of organic compounds. Design aspects of these bioelectrocatalytic reactions are presented and discussed, including enzyme film formation on electrodes, temperature, pH, solvents, and activation of the enzymes. Finally, we discuss challenges and future perspective of these two important bioelectrocatalytic systems.

Electrochemistry coupled with mass spectrometry for the prediction of the environmental fate and elucidation of the degradation mechanisms of pesticides: current status and future prospects

One of the crucial steps in the development of a new pesticide (active molecule) is predicting its environmental and in vivo fate, so as to determine potential consequences to a living organism's health and ecology as a whole. In this regard, pesticides undergo transformation processes in response to biotic and abiotic stress. Therefore, there is a need to investigate pesticide transformation products (TPs) and the formation processes they could undergo during the manufacturing process and when discharged into the ecosystem. Although methods based on biological in vitro and in vivo experimental models are tools of choice for the elucidation of metabolic pathways of pesticides (xenobiotics in general), electrochemistry-based techniques offer numerous advantages such as rapid and low-cost analysis, easy implementation, low sample volume requirement, no matrix effects, and miniaturization to improve the performance of the developed methods. However, for greater efficiency, electrochemistry (EC) should be coupled with analytical techniques such as mass spectrometry (MS) and sometimes liquid chromatography (LC), leading to the so-called EC-MS and EC-LC-MS hybrid techniques. In this review, past studies, current applications and utilization of EC-MS and EC-LC-MS techniques for the simulation of environmental fate/degradation of pesticides were reviewed by selected studies with chemical transformation, structures of metabolites, and some experimental conditions. The current challenges and future trends for the mimicry and prediction of the environmental fate/degradation of pesticides based on electrochemical methods combined with mass spectrometry were highlighted.

One-Step Regio- and Stereoselective Electrochemical Synthesis of Orexin Receptor Antagonist Oxidative Metabolites

Synthesis of drug metabolites, which often have complex structures, is an integral step in the evaluation of drug candidate metabolism, pharmacokinetic (PK) properties, and safety profiles. Frequently, such synthetic endeavors entail arduous, multiple-step de novo synthetic routes. Herein, we present the one-step Shono-type electrochemical synthesis of milligrams of chiral α-hydroxyl amide metabolites of two orexin receptor antagonists, MK-8133 and MK-6096, as revealed by a small-scale (pico- to nano-mole level) reaction screening using a lab-built online electrochemistry (EC)/mass spectrometry (MS) (EC/MS) platform. The electrochemical oxidation of MK-8133 and MK-6096 was conducted in aqueous media and found to produce the corresponding α-piperidinols with exclusive regio- and stereoselectivity, as confirmed by high-resolution nuclear magnetic resonance (NMR) characterization of products. Based on density functional theory (DFT) calculations, the exceptional regio- and stereoselectivity for this electrochemical oxidation are governed by more favorable energetics of the transition state, leading to the preferred secondary carbon radical α to the amide group and subsequent steric hindrance associated with the U-shaped conformation of the cation derived from the secondary α-carbon radical, respectively.

Nanoporous Gold Catalyst for the Oxidative N-dealkylation of Drug Molecules: A Method for Synthesis of N-dealkylated Metabolites

A novel method for the selective catalytic N‐dealkylation of drug molecules on a nanoporous gold (NPG) catalyst producing valuable N‐dealkylated metabolites and intermediates is described. Drug metabolites are important chemical entities at every stage of drug discovery and development, from exploratory discovery to clinical development, providing the safety profiles and the ADME (adsorption, distribution, metabolism, and elimination) of new drug candidates. Synthesis was carried out in aqueous solution at 80 °C using air (oxygen source) as oxidant, in single step with good isolated yields. Different examples examined in this study showed that aerobic catalytic N‐dealkylation of drug molecules on NPG has a broad scope supporting N‐deethylation, N‐deisopropylation and N‐demethylation, converting either 3° amines to 2° amines, or 2° amines to 1° amines.

Electrochemistry-coupled to liquid chromatography-mass spectrometry-density functional theory as a new tool to mimic the environmental degradation of selected phenylurea herbicides

In vitro and in vivo experimental models, mainly based on cell cultures, animals, healthy humans and clinical trials, are useful approaches for identifying the main metabolic pathways. However, time, cost, and matrix complexity often hinder the success of these methods. In this study, we propose an alternative non-enzymatic method, using electrochemistry (EC) coupled to liquid chromatography (LC) - high resolution mass spectrometry (HRMS) - DFT theoretical calculations (EC/LC-MS/DFT) for the mimicry/simulation of the environmental degradation of phenylurea herbicides, and for the mechanism elucidation of this class of herbicides. Fenuron, monuron, isoproturon, linuron, monolinuron, metoxuron and chlortoluron were selected as relevant model compounds. The intended compounds are oxidized by EC, separated by LC and detected using electrospray ionization HRMS. The main oxidation products were hydroxylated compounds obtained by substitution and addition reactions. Unstable quinone imines/methines, rarely observed by conventional methods, have been identified during the oxidative degradation of phenylurea herbicides for the first time in this study. Some were directly observed and the others were trapped by glutathione GSH. Reactions such as hydrolytic substitutions (-Cl/+OH and -C₃H₇/+OH and -CH₃/+OH and -OCH₃/+OH), aromatic hydroxylation, alkyl carbon hydroxylation, dehydrochlorination/dehydromethylation/dehydromethoxylation and conjugation have been successfully mimicked. The obtained results, supported by theoretical calculations, are useful for simulating/understanding and predicting the oxidative degradation pathways of pesticides in the environment.

Electrochemical Oxidation of 6:2 Polyfluoroalkyl Phosphate Diester-Simulation of Transformation Pathways and Reaction Kinetics with Hydroxyl Radicals

Polyfluoroalkyl phosphate diesters (diPAPs) are widely used for paper and cardboard impregnation and discharged via waste streams from production processes and consumer products. To improve the knowledge about the environmental fate of diPAPs, electrochemical oxidation (EO) was used to characterize the transformation pathways and reaction kinetics. 6:2 diPAP was transformed electrochemically to perfluorocarboxylic acids (C5-C7 PFCAs) and two intermediates (6:2 fluorotelomer carboxylic acid, FTCA, and 6:2 fluorotelomer unsaturated carboxylic acid, FTUCA). EO of potential intermediates 6:2 monoPAP and 6:2 fluorotelomer alcohol (FTOH) showed similar transformation products but with different ratios. We show that 6:2 diPAP is initiated by OH radical (•OH) reactions, as evidenced by the measured steady-state concentrations of •OH with the probe molecule terephthalic acid, quenching experiments, and pH dependency of the reaction. PFHpA was the main product of 6:2 diPAP oxidation, and it was formed in a pseudo-first-order reaction for which a bimolecular rate constant was estimated to be k O • H , diPAP form PFHpA = 9.4(±1.4) × 107 M-1 s-1 by an initial rate approach. This can be utilized to estimate the environmental half-life of 6:2 diPAP for the reaction with •OH and the formation kinetics of persistent PFCAs.

Surface charge-controlled electron transfer and catalytic behavior of immobilized cytochrome P450 BM3 inside dendritic mesoporous silica nanoparticles

Understanding the influencing factors on the reaction kinetics of P450 BM3 within confined spaces is essential for developing efficient P450 BM3 bioreactors. Herein, two dendritic mesoporous silica nanoparticles (OH-DMSNs and NH₂-DMSNs) with similar pore size but opposite surface charge have been prepared and served as the vehicle to immobilize P450 BM3. With the help of the film-forming material of chitosan, P450 BM3/OH-DMSN and P450 BM3/NH₂-DMSN composites were immobilized on GC electrode and characterized with electrochemical measurements. Compared with P450 BM3/OH-DMSNs/GCE, P450 BM3/NH₂-DMSNs/GCE showed higher electron transfer efficiency with higher current charge and lower k_s value. Besides, the generated catalytic current towards testosterone on P450 BM3/NH₂-DMSNs/GCE was 1.81 times larger than P450 BM3/OH-DMSNs/GCE. Furthermore, P450 BM3 inside NH₂-DMSNs displayed higher affinity towards testosterone with the lower K_m^app value of 244.82 μM. These results are attributed to the positively charged internal walls of NH₂-DMSNs so that P450 BM3 adapts to an orientation favorable for electron exchange with electrodes and substrate binding with the active sites. The present study provides fundamentals for regulating the surface charge to optimize redox process and catalytic behavior in CYP bioreactors through electrostatic interactions.

Pushing the boundaries of C–H bond functionalization chemistry using flow technology

C–H functionalization chemistry is one of the most vibrant research areas within synthetic organic chemistry. While most researchers focus on the development of small-scale batch-type transformations, more recently such transformations have been carried out in flow reactors to explore new chemical space, to boost reactivity or to enable scalability of this important reaction class. Herein, an up-to-date overview of C–H bond functionalization reactions carried out in continuous-flow microreactors is presented. A comprehensive overview of reactions which establish the formal conversion of a C–H bond into carbon–carbon or carbon–heteroatom bonds is provided; this includes metal-assisted C–H bond cleavages, hydrogen atom transfer reactions and C–H bond functionalizations which involve an SE-type process to aromatic or olefinic systems. Particular focus is devoted to showcase the advantages of flow processing to enhance C–H bond functionalization chemistry. Consequently, it is our hope that this review will serve as a guide to inspire researchers to push the boundaries of C–H functionalization chemistry using flow technology.

Accessing Drug Metabolites via Transition-Metal Catalyzed C-H Oxidation: The Liver as Synthetic Inspiration

Can classical and modern chemical C-H oxidation reactions complement biotransformation in the synthesis of drug metabolites? We have surveyed the literature in an effort to try to answer this important question of major practical significance in the pharmaceutical industry. Drug metabolites are required throughout all phases of the drug discovery and development process; however, their synthesis is still an unsolved problem. This Review, not intended to be comprehensive or historical, highlights relevant applications of chemical C-H oxidation reactions, electrochemistry and microfluidic technologies to drug templates in order to access drug metabolites, and also highlights promising reactions to this end. Where possible or appropriate, the contrast with biotransformation is drawn. In doing so, we have tried to identify gaps where they exist in the hope to spur further activity in this very important research area.

Exploiting plug-and-play electrochemistry for drug discovery

Electrochemistry has emerged as a powerful analytical technique for chemical analysis of living cells, biologically active molecules and metabolites. Electrochemical biosensor, microfluidics and mass spectrometry are the most frequently used methods for electrochemical detection and monitory, which comprise a collection of extremely useful measurement tools for various fields of biology and medicine. Most recently, electrochemistry has been shown to be coupled with nanotechnology and genetic engineering to generate new enabling technologies, providing rapid, selective, and sensitive detection and diagnosis platforms. The primary focus of this review is to highlight the utility of electrochemical strategies and their conjunction with other approaches for drug metabolism and discovery. Current challenges and possible future developments and applications of electrochemistry in drug studies are also discussed.