Characterization of MIP and MIP functionalized surfaces: Current state-of-the-art

Molecularly imprinted polymers for sensing/depleting human serum albumin (HSA): A critical review of recent advances and current challenges

Human serum albumin (HSA) is an essential biomacromolecule in the blood circulatory system because it carries numerous molecules, including fatty acids (FAs), bilirubin, metal ions, hormones, and different pharmaceuticals, and plays a significant role in regulating blood osmotic pressure. Fluctuations in HSA levels in human biofluids, particularly urine and serum, are associated with several disorders, such as elevated blood pressure, diabetes mellitus (DM), liver dysfunction, and a wide range of renal diseases. Thus, the ability to quickly and accurately measure HSA levels is important for the rapid identification of these disorders in human populations. Molecularly imprinted polymers (MIPs), well known as artificial antibodies (Abs), have been extensively used for the quantitative detection of small molecules and macromolecules, especially HSA, in recent decades. This review highlights major challenges and recent developments in the application of MIPs to detect HSA in artificial and real samples. The fabrication and application of various MIPs for the depletion of HSA are also discussed, as well as different MIP preparation approaches and strategies for overcoming obstacles that hinder the development of MIPs with high efficiency and recognition capability for HSA determination/depletion.

Molecularly imprinted electrochemical biosensor for thrombin detection by comparing different monomers

Aim: Investigating molecularly imprinted polymers (MIPs) in electrochemical biosensors for thrombin detection, an essential protein biomarker. Comparing different monomers to showcase distinct sensitivity, specificity and stability advantages. Materials & methods: Dopamine, thionine and ethanolamine serve as monomers for MIP synthesis. Electrochemical methods and atomic force microscopy characterize sensor surfaces. Performance is evaluated, emphasizing monomer-specific electrochemical responses. Results: Monomer-specific electrochemical responses highlight dopamine's superior signal change and stability over 30 days. Notably, a low 5 pg/ml limit of detection, a broad linear range (5-200 pg/ml) and enhanced selectivity against interferents are observed. Conclusion: Dopamine-based MIPs show promise for high-performance electrochemical thrombin biosensors, suggesting significant applications in clinical diagnostics.

Molecularly imprinted polymers in online extraction liquid chromatography methods: Current advances and recent applications

BACKGROUND

One of the primary objectives in green analytical practices is the seamless integration of extraction and separation steps, resulting in the augmentation of both analytical throughput and method performance. Consequently, the exploration of prospective sorbent materials has drawn significant attention in the scientific community, particularly concerning the potential for online procedures. Employing the optimal sorbent material within an automated analytical approach holds the promise of elevating the precision of the analytical evaluation. Molecularly imprinted polymers (MIPs) excel in specific analyte interaction within complex matrices. However, MIPs' full potential was not widely exploring especially for online analytical methodologies.

RESULTS

Here is presented a comprehensive overview of the current applications of MIPs as sorbent materials within integrated and automated separation methodologies applied to diverse matrices including biological, food, and environmental samples. Notably, their primary advantage, as evidenced in the literature, lies in their exceptional selectivity for the target analyte discussed according to the adopted synthesis protocol. Furthermore, the literature discussed here illustrates the versatility of MIPs in terms of modification with one or more phases which are so-called hybrid materials, such as molecularly imprinted monoliths (MIM), the molecularly imprinted ionic liquid polymer (IL-MIP), and restricted access to molecularly imprinted polymer (RAMIP). The reported advantages enhance their applicability in integrated and automated separation procedures, especially to the column switching methods, across a broader spectrum of applications.

SIGNIFICANCE

This revision aims to demonstrate the MIP's potential as a sorbent phase in integrated and automated methods, this comprehensive overview of MIP polymers in integrated and automated separation methodologies can be used as a valuable guide, inspiring new research on developing novel horizons for MIP applications to have their potential emphasized in analytical science and enhanced to the great analytical methods achievement.

Synthesis, Characterization, and Evaluation of a Novel Molecularly Imprinted Polymer (MIP) for Selective Quantification of Curcumin in Real Food Sample by UV-Vis Spectrophotometry

Curcumin is the main colorant of the curcuma longa plant, a food with many benefits for human health. This work aims to synthesize a novel molecularly imprinted polymer (MIP) for the selective detection of curcumin in real samples obtained from the local market of Peru. MIPs were synthesized via bulk polymerization using curcumin, acrylamide, ethylene glycol dimethacrylate, ABCV, and acetonitrile. FTIR spectra showed equal spectra for MIP and NIP. N2 physisorption analysis presented a higher value BET surface for the MIP (28.5 m2 g-1) compared to the NIP (18.5 m2 g-1). The adsorption capacity of the MIP was evaluated using UV-vis spectrophotometry in the band around 430 nm. The adsorption kinetics found were of pseudo-second-order and a Qe value of 16.2 mg g-1. Furthermore, the adsorption process resembles the Freundlich adsorption model with a heterogeneity factor of less than 1 (0.61) and Kf greater for MIP (1.97). The selectivity test indicated that MIP is more selective for curcumin (Q = 13.20 mg g-1) than against interferents (Q = 2.19 mg g-1). The specific selectivity factor (S) obtained for the interferents was greater than 1 which indicates a good selectivity. Finally, the application of MIP in real samples using UV-vis spectrophotometry yielded a recovery value greater than 70%.

Molecularly Imprinted Polymer-Based Sensors for Protein Detection

The accurate detection of biological substances such as proteins has always been a hot topic in scientific research. Biomimetic sensors seek to imitate sensitive and selective mechanisms of biological systems and integrate these traits into applicable sensing platforms. Molecular imprinting technology has been extensively practiced in many domains, where it can produce various molecular recognition materials with specific recognition capabilities. Molecularly imprinted polymers (MIPs), dubbed plastic antibodies, are artificial receptors with high-affinity binding sites for a particular molecule or compound. MIPs for protein recognition are expected to have high affinity via numerous interactions between polymer matrices and multiple functional groups of the target protein. This critical review briefly describes recent advances in the synthesis, characterization, and application of MIP-based sensor platforms used to detect proteins.

Molecularly imprinted polymers: preparation, characterisation, and application in drug delivery systems

Molecular imprinting technology defines the creation of molecularly imprinted polymer (MIP) molecules in which template molecules can place in a key-lock relationship through shape, diameter, and functional groups. Although molecular imprinting technology has been employed in different fields, its applications in drug delivery systems (DDSs) have gained momentum recently. The high loading efficiency, high stability, and controlled drug release are the primary advantages of MIPs. Here, the main components, preparation methods, and characterisation tests of MIPs are summarised, and their applications in DDSs administered by different routes are evaluated in detail. The review offers a perspective on molecular imprinting technology and applications of MIPs in drug delivery by surveying the literature approximately 1998-2021 together with the outlined prospects.

Challenges in the design of electrochemical sensor for glyphosate-based on new materials and biological recognition

Glyphosate (GLY) is the main ingredient in the weed killer Roundup and the most widely used pesticide in the world. Studies of the harmful effects of GLY on human health began to become more wide-ranging after 2015. GLY is listed by the International Agency for Research on Cancer (IARC) as a carcinogenic hazard to humans. Moreover, GLY has the property to complex with transition metals and are stable for long periods, being considered a high-risk element for different matrices, such as environmental (soil and water) and food (usually genetically modified crops). Since that, it was noticed an increment in the development of new analytical methods for its determination in different matrices like food, environmental and biological fluids. Noteworthy, the application of electrochemical techniques for downstream detection sparked interest due to the ability to minimize or eliminate the use of polluting chemicals, using simple and affordable equipment. This work aims to review the contribution of the electroanalytical methods for the determination of GLY in different food and environmental matrices. Parameters such as the electrochemical transduction techniques based on the electrical measurement signals, receptor materials for electrodes preparation, and the detection mechanisms are described in this review. The literature review shows that the electrochemical sensors are powerful detection system that can be improved by their design and by their portability to fulfil the needs of the GLY determination in laboratory benches, or even in situ analysis.

Molecularly imprinted polymer as solid phase extraction phase for condensed tannin determination from Brazilian natural sources

This study proposed the developed of a molecularly imprinted polymer for the extraction and determination of condensed tannins from the barks of Red Angico (Anadenanthera macrocarpa), Jabuticaba (Myrciaria jabuticaba) and Umbu (Spondias tuberosa). The polymer was synthesized using the condensed tannin extracted from the Red Angico bark as the template molecule, as well as, catechin standard solution. Selectivity and characterization tests for the molecularly imprinted polymers and a non-imprinted polymer were performed. The polymers were employed as extraction phase for the solid-phase extraction of condensed tannins from the studied samples. A higher imprinting coefficient was obtained for MIP synthesized from catechin standard solution as template. The intrinsic solid-phase extraction variables were evaluated and optimized. The developed methodology showed inter- and intra-day precisions of 6.7-10.1 and 4.6-8.4, respectively, and recovery values ranging from 101.9 to 105.5. The obtained limits of detection and quantification were 10 mg L^-1 and 40 mg L^-1, respectively. It is important to highlight that the developed methodology here was applied to common waste and tailings from Brazilian food industry. The results indicate that the polymers were capable to extract tannins from the evaluated samples, reducing method cost and time.

Design of heterostructured hybrids comprising ultrathin 2D bismuth tungstate nanosheets reinforced by chloramphenicol imprinted polymers used as biomimetic interfaces for mass-sensitive detection

Combining nanomaterials in varying morphology and functionalities gives rise to a new class of composite materials leading to innovative applications. In this study, we designed a heterostructured hybrid material consisting of two-dimensional bismuth nanosheets augmented by molecularly imprinted networks. Antibiotic overuse is now one of the main concerns in health management, and their monitoring is highly desirable but challenging. So, for this purpose, the resulting composite interface was used as a transducer for quartz crystal microbalances. The main objective was to develop highly selective mass-sensitive sensor for chloramphenicol. Morphological investigation revealed the presence of ultrathin, square shaped nanosheets, 2-3 nm in height and further supplemented by imprinted polymers. Sensor responses are described as the decrease in the frequency of microbalances owing to chloramphenicol re-binding in the templated cavities, yielding a detection limit down to 0.74 μM. This sensor demonstrated a 100 % specific detection of chloramphenicol over its interfering and structural analogs (clindamycin, thiamphenicol, and florfenicol). This composite interface offers the advantage of selective binding and excellent sensitivity due to special heterostructured morphology, in addition to benefits of robustness and online monitoring. The results suggest that such composite-based sensors can be favorable platforms, especially for commercial prospects, to obtain selective detection of other biomolecules of clinical importance.

Molecularly Imprinted Polymer-Based Microfluidic Systems for Point-of-Care Applications

Fast progress has been witnessed in the field of microfluidic systems and allowed outstanding approaches to portable, disposable, low-cost, and easy-to-operate platforms especially for monitoring health status and point-of-care applications. For this purpose, molecularly imprinted polymer (MIP)-based microfluidics systems can be synthesized using desired templates to create specific and selective cavities for interaction. This technique guarantees a wide range of versatility to imprint diverse sets of biomolecules with different structures, sizes, and physical and chemical features. Owing to their physical and chemical robustness, cost-friendliness, high stability, and reusability, MIP-based microfluidics systems have become very attractive modalities. This review is structured according to the principles of MIPs and microfluidic systems, the integration of MIPs with microfluidic systems, the latest strategies and uses for point-of-care applications and, finally, conclusions and future perspectives.

Visual test for the presence of the illegal additive ethyl anthranilate by using a photonic crystal test strip

A test strip has been developed for the rapid detection of the illegal additive ethyl anthranilate (EA) in wine. The detection scheme is based on a combination of photonic crystal based detection and molecular imprinting based recognition. The resulting molecularly imprinted photonic crystal (MIPC) undergoes a gradual color change from green to yellow to red upon binding of EA. A semi-quantitative colorimetric card can be used to estimate the content of EA, either visually or by making use of an optical fiber spectrometer. A linear relationship was found between the Bragg diffraction peak shift and the concentration of EA in the range from 0.1 mM to 10 mM. The detection limit is 10 μM. The test has been successfully used to screening for the presence of EA in grape wine. The test strip is selective, and can be re-used after re-activation. Graphical abstract Schematic representation of the fabrication and application of the molecularly imprinted photonic crystal (MIPC) based test trip. The resulting MIPC undergoes a gradual color change from green to yellow to red upon binding of the illegal wine additive ethyl anthranilate (EA).

Specific purification of a single protein from a cell broth mixture using molecularly imprinted membranes for the biopharmaceutical industry

A surface imprinting method is presented herein for the development of a highly selective yet highly permeable molecularly imprinted membrane for protein separation and purification. The resultant protein imprinted membrane was shown to exhibit great potential for the efficient separation of the template protein from a binary mixture and a cell lysate solution, while maintaining high transport flux for complementary molecules. Bovine Serum Albumin (BSA) and Lysozyme (Lys) were individually immobilized on a cellulose acetate membrane as template molecules. In situ surface crosslinking polymerization was then used for protein imprinting on the membrane for a controlled duration. Both membranes showed high adsorption capacity towards template proteins in the competitive batch rebinding tests. In addition, the adsorption capacity could be greatly enhanced in a continuous permeation procedure, where the resultant membrane specifically adsorbed the template protein for more than 40 h. Moreover, this is the first report of purification of a specific protein from the cell broth mixture using a molecularly imprinted membrane. The protein imprinted membrane enables the transport of multiple non-template proteins with high permeation rate in a complex system, thus opening the way for high efficiency protein separation at a low cost for the industry.

A surface imprinting method is presented herein for the development of a highly selective yet highly permeable molecularly imprinted membrane for protein separation and purification.

Advances in the development of molecularly imprinted polymers for the separation and analysis of proteins with liquid chromatography

This review documents recent advances in the design, synthesis, characterization, and application of molecularly imprinted polymers in the form of monoliths and particles/beads for the use in the separation and analysis of proteins with solid-phase extraction or liquid chromatography. The merits of three-dimensional molecular imprinting, whereby the molecular template is randomly embedded in the polymer, and two-dimensional imprinting, in which the template is confined to the surface, are described. Target protein binding can be achieved by either using the entire protein as a template or by using a protein substructure as template, that is, a peptide, as in the "epitope" approach. The intended approach and strategy then determine the choice of polymerization method. A synopsis has been provided on methods used for the physical, chemical, and functional characterizations and associated performance evaluations of molecularly imprinted and nonimprinted control polymers, involving a diverse range of analytical techniques commonly used for low and high molecular mass analytes. Examples of recent applications demonstrate that, due to the versatility of imprinting methods, molecularly imprinted monoliths or particles/beads can be adapted to protein extraction/depletion and separation procedures relevant to, for example, protein biomarker detection and quantification in biomedical diagnostics and targeted proteomics.

Developments in mycotoxin analysis: an update for 2016-2017

This review summarises developments in the determination of mycotoxins over a period between mid-2016 and mid-2017. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone are covered in individual sections. Advances in proper sampling strategies are discussed in a dedicated section, as are methods used to analyse botanicals and spices and newly developed LC-MS based multi-mycotoxin methods. This critical review aims to briefly discuss the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

Novel Biomimic Crystalline Colloidal Array for Fast Detection of Trace Parathion

A novel gold doped inverse opal photonic crystal (IO PC) was successfully fabricated with combination of molecularly imprinted technical for the fast determination of parathion. First, a closest silica array arrangement behaved as the 3D photonic crystal precursors to build the opal photonic crystal (O PC). Second, the parathion-containing polymeric solution with gold nanoparticles was drawn into the 3D array cracks. After polymerization, the well-designed O PC was treated with HF solution for the etching of the silica skeleton. Finally, the template parathion was removed and the Au-MIP IO PCs were obtained. The morphology of SiO₂ and Au NPs was characterized by transmission electron microscopy (TEM), and the eluted influence of the IO PCs was monitored by scanning electron microscopy (SEM). The cross-linking effect was well optimized according to the best spectrum signal of parathion. The as-synthesized Au-MIP IO PCs displayed the specificity toward parathion and the selectivity to other competitive pesticide molecules. The response time was only 5 min, and the parathion could be well detected from real water samples. The recoveries were between 95.5% and 101.5%.

Molecularly imprinted polymer membranes and thin films for the separation and sensing of biomacromolecules

This review describes recent advances associated with the development of surface imprinting methods for the synthesis of polymeric membranes and thin films, which possess the capability to selectively and specifically recognize biomacromolecules, such as proteins and single- and double-stranded DNA, employing "epitope" or "whole molecule" approaches. Synthetic procedures to create different molecularly imprinted polymer membranes or thin films are discussed, including grafting/in situ polymerization, drop-, dip-, or spin-coating procedures, electropolymerization as well as micro-contact or stamp lithography imprinting methods. Highly sensitive techniques for surface characterization and analyte detection are described, encompassing luminescence and fluorescence spectroscopy, X-ray photoelectron spectroscopy, FTIR spectroscopy, surface-enhanced Raman spectroscopy, atomic force microscopy, quartz crystal microbalance analysis, cyclic voltammetry, and surface plasmon resonance. These developments are providing new avenues to produce bioelectronic sensors and new ways to explore through advanced separation science procedures complex phenomena associated with the origins of biorecognition in nature.