Hydrophilic materials in sample pretreatment

Self-assembled flower-like carbon nanosheets for magnetic solid-phase extraction of microcystins from aquatic organism

Adsorbents with good dispersibility and high efficiency are crucial for magnetic solid-phase extraction (MSPE). In this study, flower-like magnetic nanomaterials (F-Ni@NiO@ZnO2-C) were successfully prepared by calcination of metal-organic framework (MOF) precursors that was stacked by two-dimensional (2D) nanosheet. The synthesized F-Ni@NiO@ZnO2-C has a flower-like layered structure with a large amount of pore space, promoting the rapid diffusion of targets. In addition, Zn2+ doped in MOF precursors was still retained that further produced strong metal chelation with targets. The unique structure of F-Ni@NiO@ZnO2-C was used as MSPE adsorbent, and combined with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) for extraction of three microcystins (MCs) detection, including microcystin-LR (MC-LR), microcystin-RR (MC-RR), microcystin-YR (MC-YR). The resulting method has a detection limit of 0.2-1.0 pg mL-1, a linear dynamic range of 0.6-500.0 pg mL-1 and has good linearity (R ≥ 0.9996). Finally, the established method was applied to the highly selective enrichment of MCs in biological samples, successfully detecting trace amounts of MCs (8.4-15.0 pg mL-1) with satisfactory recovery rates (83.7-103.1 %). The results indicated that flower-like magnetic F-Ni@NiO@ZnO2-C was a promising adsorbent, providing great potential for the determination of trace amounts of MCs in biological samples.

Bifunctional fluorescent molecularly imprinted resin based on carbon dot for selective detection and enrichment of 2,4-dichlorophenoxyacetic acid in lettuce

The work provided a method for synthesizing a simple fluorescent molecularly imprinted polymer by surface-initiated atom transfer radical polymerization (SI-ATRP) and its application in real sample. Poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres were selected as a matrix, 4-vinylpyridine, ethylene glycol dimethacrylate, 2,4-dichlorophenoxyacetic acid (2,4-D) as functional monomer, cross-linker and template molecule, respectively, to fabricate MAR@MIP with core-shell structure. For comparison, carbon dot (CD) as a fluorescence source was synthesized with o-phenylenediamine and tryptophan as precursors via hydrothermal method and integrated into MIP to acquire MAR@CD-MIP. MAR@CD-NIP was also prepared without adding the template molecule. The adsorption capacity of MAR@CD-MIP reached 104 mg g-1 for 2,4-D, which was higher than that of MAR@MIP (60 mg g-1). However, the adsorption capacity of MAR@CD-NIP was only 13.2 mg g-1. The linear range of fluorescence detection for 2,4-D was 18-72 μmol/L, and the limit of detection (LOD) was 0.35 μmol/L. The fluorescent MAR@CD-MIP was successfully applied in enrichment of lettuce samples. The recoveries of the three spiked concentrations of 2,4-D in lettuce were tested by fluorescence spectrophotometry and ranged in 97.3-101.7 %. Meanwhile, the results were also verified by HPLC. As a result, bi-functional molecularly imprinted resin was successfully fabricated to detect and enrich 2,4-D in real samples, and exhibited good selectivity, sensitivity and great application prospect in food detection.

Rational design of nanozyme with integrated sample pretreatment for colorimetric biosensing

Nanozymes have been widely used in the field of biosensing owing to their high stability, low cost, adjustable catalytic activity, and convenient modification. However, achieving high selectivity and sensitivity simultaneously in nanozyme-based colorimetric sensing remains a major challenge. Nanozymes are nanomaterials with enzyme-simulating activity that are often used as solid-phase adsorbents for sample pretreatment. Our design strategy integrated sample pretreatment function into the nanozyme through separation and enrichment, thereby improving the selectivity and sensitivity of nanozyme-based colorimetric biosensing. As a proof-of-concept, glucose was used as the model analyte in this study. A phenylboric acid-modified magnetic nanozyme (Cu/Fe3O4@BA) was rationally designed and synthesized. Selectivity was enhanced by boronate-affinity specific adsorption and the elimination of interference after magnetic separation. In addition, magnetic solid-phase extraction enrichment was used to improve the sensitivity. A recovery rate of more than 80% was reached when the enrichment factor was 50. The synthesized magnetic Cu/Fe3O4@BA was recyclable at least five times. The proposed method exhibited excellent selectivity and sensitivity, simple operation, and recyclability, providing a novel and practical strategy for designing multifunctional nanozymes for biosensing.

Hydrophilic interaction chromatography-type sorbent prepared by the modification of methacrylate-base resin with polyethyleneimine for solid-phase extraction of polar compounds

Hydrophilic interaction chromatography (HILIC)-type sorbents were newly developed for the solid-phase extraction (SPE) of polar compounds. Two methacrylate-base resins with different cross-linking monomers and pore properties were synthesized, and three polyethyleneimines (PEIs) with different molecular weights were modified onto each base resin. In both cases, PEIs with a molecular weight of 10,000 (PEI-10,000) exhibited the highest adsorption properties for polar compounds (uracil, uridine, adenosine, cytidine, and guanosine). To control the water-enriched layer at the surface of the PEI-10,000-modified sorbents, the additive amount of PEI-10,000 in the modified reaction was also optimized. When 10 times the amount of PEI-10,000 to each base resin was added, an improvement in adsorption property was observed. Moreover, the use of a nonaqueous sample solution (100% acetonitrile) during the sample loading process drastically improved adsorption, especially for uracil (about 80%) and adenosine (100%). These results indicate that the formation of a strong water-enriched layer at the surface of sorbents with an effective expression of hydrophilic interaction was an important factor in the adsorption properties of polar compounds in HILIC mode-SPE.

A combination of surface-initiated atom transfer radical polymerization and photo-initiated "thiol-ene" click chemistry: Fabrication of functionalized macroporous adsorption resins for enrichment of glycopeptides

A hydrophilic adsorbent (Cys@poly(AMA)@MAR) was successfully prepared for the enrichment of N-glycopeptides via surface-initiated atom transfer radical polymerization (SI-ATRP) and photo-initiated "thiol-ene" reaction using monodisperse macroporous adsorbent resin (MAR) as adsorption matrix. Due to the presence of electron-deficient acrylic groups and electron-rich vinyl groups in allyl methacrylate (AMA), both of them can participate in free radical reaction. Therefore, the polymerization time of SI-ATRP was optimized. The resulting poly(AMA)@MAR was modified with l-cysteine (L-Cys) via photo-initiated "thiol-ene" reaction, and the amount of vinyl retained was determined by measuring the adsorption of Cu²⁺. The Cys@poly(AMA)@MAR pendant brushes with high density of amine and carboxyl groups could capture N-glycopeptides from IgG digest and human serum digest by hydrophilic interaction. The 22 N-glycopeptides were identified from IgG digest and the limit of detection reached 10 fmol. The 319 N-glycosylation sites and 583 N-glycopeptides were identified from 2 μL human serum digest and mapped to 147 glycoproteins. It demonstrates great potential and commercialization prospects for the enrichment of N-glycopeptides.

Design of a hydrophilic mercaptosuccinic acid-functionalized β-cyclodextrin polymer via host–guest interaction: toward highly efficient glycopeptide enrichment

A novel hydrophilic material (denoted as magCDP@Ada-MSA) was constructed through host–guest interaction between crosslinked β-cyclodextrin polymers and mercaptosuccinic acid derived adamantane, and was applied to specific glycopeptide enrichment.

Design and construction of a hydrophilic coating on macroporous adsorbent resins for enrichment of glycopeptides

Although macroporous adsorbent resins (MARs) have been commercialized and widely applied in industrial and life fields, it is still of necessity to develop simple approaches to functionalize MARs. One of the most widely used methods to realize excellent fouling resistance performance is surface modification of hydrophilic polymers on substrates to fabricate an anti-biofouling coating. Herein, three kinds of hydrophilic poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) MAR were designed and facilely prepared by coating a layer of porous organic polymers (POPs) via either an epoxy-amine ring-opening polymerization or amine-aldehyde condensation reaction using isophthalaldehyde (IPA), 1,4,7,10-tetraazacyclododecane (cyclen), melamine and 1,3,5-triglycidyl isocyanurate (TGIC) as precursors. By taking advantage of their merits, such as large surface area, excellent hydrophilicity and unbiased affinity toward all types of glycopeptide, three functionalized hydrophilic MARs were successfully applied to capture glycopeptides from complex samples as hydrophilic interaction liquid chromatography (HILIC) sorbents. A total of 694 N-glycopeptides and 372 N-glycosylation sites were identified from 2 μL of human serum digest with poly(TC)@MAR, which were not only more than those of poly(MT)@MAR (286 N-glycosylation sites and 547 N-glycopeptides) and poly(IM)@MAR (669 N-glycopeptides and 355 N-glycosylation sites), but also more than those of other reported HILIC materials. This work provided a new and simple way to synthesize enrichment materials for liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) analysis of glycoproteomes.

Fabrication of magnetic dual-hydrophilic metal organic framework for highly efficient glycopeptide enrichment

Highly selective glycopeptide enrichment is important before mass spectrometry analysis because of the ultra-low abundance of glycopeptides in the peptide mixtures. Herein, a UiO-66-NH₂-based magnetic composite was prepared and used for the hydrophilic enrichment of glycopeptides. The composite was modified with phytic acid (PA) molecules by partially replacing 2-aminoterephthalic acid ligands in UiO-66-NH₂, with electrostatic interactions also promoting this modification process. Based on the hydrophilicity of both the PA molecules and the UiO-66-NH₂ skeleton, the resulting material, denoted as MUiO-66-NH₂/PA, showed excellent dual hydrophilicity towards glycopeptide enrichment. Compared with pure UiO-66-NH₂, the specific surface area and hydrophilicity of the prepared material were increased, and MUiO-66-NH₂/PA exhibited good magnetic responsiveness to facilitate a convenient enrichment procedure. HRP and IgG were used as standard proteins to evaluate the glycopeptide enrichment properties, with 21 and 34 glycopeptides enriched from their tryptic digests. Furthermore, MUiO-66-NH₂/PA showed outstanding sensitivity (1 fmol/μL) and selectivity (HRP/BSA = 1:1000), and achieved remarkable glycopeptide enrichment performance for practical human serum samples. Notably, MUiO-66-NH₂/PA showed perfect reusability and stability, achieving enrichment performance after five cycles similar to that of the first use. This material can be used for glycopeptide enrichment to obtain further glycosylation information, providing the possibility for cancer treatment.

Synthesis of Al3+-doping-TiO2 monodisperse microspheres and their application for phosphopeptides and glycopeptides enrichment

Glycosylation and phosphorylation are two of the most common and important post-translational modifications (PTMs) of proteins, which play critical roles in regulating a variety of complex biological processes and involvement in many diseases. Due to the low abundance of phosphopeptides and glycopeptides, highly selective enrichment methods are crucial to the identification of protein phosphorylation and glycosylation by mass spectrometry (MS). Here, monodisperse uniform Al³⁺-doping-TiO₂ mixed oxide microspheres were easily synthesized. The morphology was controlled by a sol-gel method, during the hydrothermal treatment. The obtained microspheres with uniform particle size distribution (about 1-2 μm)，high surface area and improved pore structures, were characterized by SEM, TEM, XRD and N₂ adsorption-desorption isotherms. Al³⁺-doping-TiO₂ was applied in enriching glycopeptides and phosphopeptides respectively or simultaneously by using different enrichment conditions, achieving selective enrichment of glycopeptides and phosphopeptides. 20 glycopeptides and 25 phosphopeptides enriched from the tryptic digest mixtures of human serum immunoglobulin G (IgG) and α-casein (molar ratio of 1:1) were obviously observed with greatly improved signal-to-noise (S/N) ratio. Meanwhile, the enrichment results of non-fat milk and human serum also show the enrichment selectivity from complex biological samples. This study will provide a novel insight for selective enrichment of glycopeptides and phosphopeptides in post-translational modification proteomics research.

Facile preparation of bifunctional adsorbents for efficiently enriching N-glycopeptides and phosphopeptides

In bottom-up strategy, specific enrichment of glycopeptides and phosphopeptides from complicated biological samples is a prerequisite for efficient identifying glycosylation and phosphorylation by mass spectrometry. Although there were a plethora of materials used as either hydrophilic interaction liquid chromatography (HILIC) or immobilized metal affinity chromatography (IMAC) adsorbents, even several bifunctional materials for simultaneous enrichment of glycopeptides and phosphopeptides, most of them are not easily commercialized as many other well-performing adsorbents due to the complicated preparation process. In our case, a one-step modification strategy was developed to prepare bifunctional adsorbents for HILIC and IMAC, employing O-phospho-l-serine as the modifier and poly(GMA-co-EDMA) microspheres, a kind of macroporous adsorption resin (MAR) with epoxy groups, as the matrix. The MARs were directly modified with O-phospho-l-serine under facile condition for HILIC strategy and further chelated with Ti⁴⁺ for IMAC strategy. A total of 522 unique N-glycopeptides and 442 unique N-glycosylation sites mapped to 275 N-glycoproteins was identified from HeLa cell proteins, showing excellent enrichment efficiency in HILIC. Additionally, 3141 unique phosphopeptides were unambiguously identified from 200 μg of digest of HeLa cell proteins, demonstrating great enrichment efficiency in IMAC. Moreover, these materials have been successfully applied in the analysis of multiple biological samples including human serum and milk, demonstrating their feasibility for real sample applications and potential business value.

Determination of trace bisphenols in functional beverages through the magnetic solid-phase extraction with MOF-COF composite

In this study, a novel porous composite (Fe₃O₄@TAPB-COF@ZIF-8) consisting of metal-organic and covalent organic frameworks was developed and applied to the magnetic solid-phase extraction (MSPE) of bisphenols. The extraction parameters such as the extraction time, solution pH, amounts of adsorbent, and ionic strength were investigated to obtain the best extraction conditions. By optimizing the MSPE, a convenient and sensitive analytical method was established in combination with high-performance liquid chromatography. The method achieved low detection limits (0.04-0.05 ng mL^-1), wide linear range (0.25-1000 ng mL^-1), good repeatability (1.20-4.30%), good reproducibility (1.34-4.03%), and satisfactory recoveries of four functional beverages (66.2-116.6%).

Amphiphilic block copolymer-grafted magnetic multi-walled carbon nanotubes as QuEChERS adsorbent for simultaneous determination of mycotoxins and pesticides in grains via liquid chromatography tandem mass spectrometry

An amphiphilic block copolymer consisting of poly(N-acryloyl-glucosamine) (PAGA) and poly(tert-butyl methacrylate) (PtBMA) was designed and grafted on magnetic multi-walled carbon nanotubes (Fe₃O₄MWCNTs). The resultant Fe₃O₄MWCNTs@copolymer was proposed as QuEChERS adsorbent for determination of 15 mycotoxins and 25 pesticides in grains via liquid chromatography tandem mass spectrometry. The adsorbent was characterized by a transmission electron microscope, scanning electron microscope, elemental analysis, and other techniques. The common matrix interferences were efficiently removed by the proposed adsorbent, such as pigment, fatty acids, and the saccharide. PAGA segment played an important role in removing the hydrophilic interferences through hydrogen bonding due to the high density of hydroxyl groups. PtBMA segment removed the fatty residues through its strong hydrophobic carbon moiety. In comparison with the commercially available QuEChERS adsorbents, the proposed adsorbent had higher adsorption capacities towards the typical matrix interferences. To achieve satisfactory recoveries of analytes, various parameters in the QuEChERS procedure were comprehensively investigated. Under the optimal conditions, 95.0% of the analytes showed satisfactory recoveries in the range 70.0-120% as well as negligible matrix effects. The limits of detection (LOD) were in the range 0.00015-1.3 μg kg^-1. Compared with previously reported QuEChERS methods, the proposed method had improved sensitivity and benefited from low matrix effects. The recoveries of analytes in various grains were in the range 60.8-108% with relative standard deviations (RSD) less than 13%. Moreover, the Fe₃O₄MWCNTs@copolymer exhibited good synthetic reproducibility and rapid magnetic separation (less than 10 s). The research provides a versatile platform to develop multi-functional QuEChERS adsorbents based on the amphiphilic block copolymer.

Molding-type Solid-phase Extraction Media Glued with Commercially Available Adhesives

The handling of a particulate sorbent for solid-phase extraction is often troublesome because it causes static clinging and scattering. To overcome this problem, a production method for a simple molding-type solid-phase extraction medium (M-SPEM) was developed in this study by using commercially available adhesives. The content of a particulate sorbent can increase to as much as 85 wt% in the M-SPEM. Because of the high content, the proposed M-SPEMs have a higher specific surface area than previous monolithic media.

Development and Evaluation of HILIC-type Sorbents Modified with Hydrophilic Copolymers for Solid-phase Extraction

Hydrophilic interaction chromatography (HILIC) has attractive attention for the separation of water-soluble compounds via HPLC. There are, however, few studies on the pretreatment of the HILIC-type solid-phase extraction (SPE) due to the difficulty of obtaining the HILIC-type sorbent. Therefore, the development of HILIC-type sorbents for SPE is essential. In this study, four different hydrophilic copolymers, namely diallylamine-maleic acid copolymer (DAM), diallylamine-acrylamide copolymer (DAA), allylamine-maleic acid copolymer (MAM), and partly methylcarbonylated allylamine acetate copolymer (MAC), were immobilized on glycidyl methacrylate (GMA)-base resin, and their adsorptive properties were evaluated. The results of the physical and adsorptive properties indicated that a balance between the water content of the water-enriched layer on sorbent and the amount of hydrophilic copolymer immobilized on the GMA-base resin was vital for the adsorption in HILIC-type sorbent for SPE.

Noncovalently Functionalized Sulfated Castor Oil-Graphene Oxide-Strengthened Polyetherimide Composite Membranes for Superior Separation of Organic Pollutants and Their Fouling Mitigation

A novel sulfated castor oil (SCO)-graphene oxide (GO)-strengthened polyetherimide (PEI) membrane was prepared for the first time via phase inversion process for the efficient separation of multiple organic pollutants with superior long-term antifouling stability. X-ray diffraction, attenuated total reflectance-Fourier transfer infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and mechanical strength studies revealed that the SCO and GO were successfully incorporated into the PEI membrane with enhanced mechanical strength. The water flux of the PEI/SCO@GO membrane (410.6 L m^-2 h^-1) was about 50 times that of bare PEI (7.8 L m^-2 h^-1) and about 6 times that of PEI/SCO (64.5 L m^-2 h^-1) membranes. The surface hydrophilicity of the PEI/SCO@GO membrane was significantly increased in terms of the decrease of the water contact angle from 98.5° (bare PEI) to 40.4°. The PEI/SCO@GO membrane separation efficiency was found to be greater than 99.0%, particularly for both the oil-in-water emulsion and the humic acid solution, respectively. Because of the higher flux recovery ratio and the lower total fouling rate of the PEI/SCO@GO membrane, a comprehensive antifouling performance was observed during the long-term foulant filtration cycle analyses. Hence, the incorporation of both SCO and GO into the PEI matrix would render the highly hydrophobic PEI material as the suitable and desirable antifouling membrane toward the treatment of various organic foulants in wastewater.

Challenges and Advances in the Fabrication of Monolithic Bioseparation Materials and their Applications in Proteomics Research

High-performance liquid chromatography integrated with tandem mass spectrometry (HPLC-MS/MS) has become a powerful technique for proteomics research. Its performance heavily depends on the separation efficiency of HPLC, which in turn depends on the chromatographic material. As the "heart" of the HPLC system, the chromatographic material is required to achieve excellent column efficiency and fast analysis. Monolithic materials, fabricated as continuous supports with interconnected skeletal structure and flow-through pores, are regarded as an alternative to particle-packed columns. Such materials are featured with easy preparation, fast mass transfer, high porosity, low back pressure, and miniaturization, and are next-generation separation materials for high-throughput proteins and peptides analysis. Herein, the recent progress regarding the fabrication of various monolithic materials is reviewed. Special emphasis is placed on studies of the fabrication of monolithic capillary columns and their applications in separation of biomolecules by capillary liquid chromatography (cLC). The applications of monolithic materials in the digestion, enrichment, and separation of phosphopeptides and glycopeptides from biological samples are also considered. Finally, advances in comprehensive 2D HPLC separations using monolithic columns are also shown.

Effects of pendant-like hydrophilic monomers on the adsorption properties of reversed-phase-type sorbents for solid-phase extraction

Solid-phase extraction (SPE) has been extensively employed as a pretreatment method. In SPE, reversed-phase-type sorbents have been widely applied for the pretreatment of environmental or biological samples. Hydrophilic-lipophilic balance (HLB)-type sorbents, constituting the copolymers used as reversed-phase-type sorbents, have been applied for various sample pretreatment methods. In HLB-type sorbents, the hydrophilic monomer contributes to the improved wettability of sorbents and increase of polar interactions. In this study, three pendant-like hydrophilic monomers, viz. N-vinylpyrrolidone (NVP), 4-acryloylmorpholine (AMO), and 4-vinyl-1,3-dioxolan-2-one (VDO), respectively, exhibiting different Log P values and possibly causing different polar interactions, were selected to improve the adsorption properties of polar compounds, and divinylbenzene (DVB)-based HLB-type sorbents containing each hydrophilic monomer were synthesized and examined. By the optimization of the molar ratio of DVB and the hydrophilic monomer (i.e. HLB), the inert diluent, and the degree of cross-linking, the developed sorbents exhibited higher recoveries for various polar compounds (viz. cytosine, uracil, cytidine, uridine, 2'-deoxycytidine, 2'-deoxyguanosine, adenine, thymidine, adenosine, and 2'-deoxyadenosine) compared to commercially available HLB-type sorbents.

Extraction of nucleobases, nucleosides and nucleotides by employing a magnetized graphene oxide functionalized with hydrophilic phytic acid and titanium(IV) ions

A magnetite@graphene oxide nanocomposite was first coated with polyethylenimine and then modified with phytic acid and titanium(IV) ions. The high loading with Ti(IV) and the good hydrophilicity of PEI and PA result in a material that can be applied to the efficient extraction of highly polar nucleobases, nucleosides and nucleotides. The physicochemical properties of the composite were investigated by scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, water contact angle measurements, thermogravimetric analysis, and vibrating sample magnetometry. A series of parameters that affect extraction and elution under the conditions of immobilized metal affinity chromatography (IMAC) and hydrophilic interaction liquid chromatography (HILIC) were examined. The analytes were eluted from the nanocomposites using 10 mM trisodium phosphate as the elution solution in the IMAC mode, and 50% methanol-water as elution solution in the HILIC mode. Figures of merit include (a) an intra-day precision of 0.1-1.0% in the IMAC mode; (b) an intra-day precision of 0.4%-0.8% in the HILIC mode; (c) detection limits between 1.8-2.8 ng mL^-1 in the IMAC mode; and (d) detection limits of 4.0-10.5 ng mL^-1 in the HILIC mode. The method was applied to the extraction of the nucleotides cytidine-5'-monophosphate (CMP), uridine-5'-monophosphate (UMP), guanosine-5'-monophosphate (GMP), and adenosine-5'-monophosphate (AMP), and the nucleobases and nucleosides hypoxanthine, adenosine, cytosine, inosine and cytidine from Cordyceps sinensis, Lentinus edodes and plasma samples. Graphical abstract Schematic presentation of the workflow for the extraction of nucleobases, nucleosides and nucleotides using phytic acid-Ti(IV) functionalized magnetite@graphene oxide nanocomposites under two distinct modes.

Effects of hydrophilic monomers on sorptive properties of divinylbenzene-based reversed phase sorbents

Solid phase extraction (SPE) has been extensively used as a pretreatment method. In SPE methods, commercially available reversed phase type sorbents, which consist of macroporus styrene-divinylbenzene or copolymers including divinylbenzene (DVB) and hydrophilic monomers, have been applied to a variety of samples. The later sorbents are called hydrophilic lipophilic balanced (HLB) type sorbents. Hydrophilic monomers in hydrophilic lipophilic balanced type sorbents contribute to the increase in retention of polar compounds, because hydrophilic monomers improve the wettability and increase the interaction with polar compounds as analytes. In this study, three different methacrylate monomers (ethylene glycol dimethacrylate (EGDMA), glycerol dimethacrylate (GDMA) and trimethylolpropane trimethacrylate (TMPTMA)), which are expected to improve the retention of polar compounds, were chosen, and DVB-based copolymetric sorbents including the three monomers were newly synthesized. Among them, the sorbents including GDMA or TMPTMA gave higher recoveries to polar compounds such as uridine and adenine than that including EGDMA. The optimization studies of hydrophilic lipophilic balance, inert diluent and the purity of DVB improved the sorptive abilities of the sorbents. The developed sorbents have higher recoveries for variety of polar compounds (cytosine, uracil, cytidine, uridine, 2'-deoxycytidine, 2'-deoxyguanosine, adenine, thymidine, adenosine and 2'-deoxyadenosine) than commercially available hydrophilic lipophilic balanced type sorbents, while the recoveries for theophylline were comparable between the proposed sorbents and the commercial sorbents.

Graphene oxide reinforced ionic liquid-functionalized adsorbent for solid-phase extraction of phenolic acids

An environmental friendly sorbent of polymeric ionic liquids modified graphene oxide-grafted silica (PILs@GO@Sil) was synthesized for solid-phase extraction (SPE) of phenolic acids. The sorbent was prepared via a chemical layer-to-layer fabrication including amidation reaction, surface radical chain-transfer polymerization and in situ anion exchange. After modification with PILs, the silica surface had higher positive potential so that it would exhibit stronger electrostatic interaction for acidic compounds compared with GO@Sil. The adsorption performance of phenolic acids was investigated through the theoretical calculation and static, kinetic state adsorption experiments. Under the optimized conditions, wide linear ranges were obtained with correlation coefficients ranging from 0.9912 to 0.9998, and limits of detection were in the range of 0.20-0.50μgL^-1. Compared with other reported methods, the proposed PILs@GO@Sil-SPE-HPLC showed higher extraction efficiency. Finally, the black wolfberry yogurt and urine were analyzed as real samples and good recoveries spiked with standard solution were obtained.