Nanomaterial-based optical chemical sensors for the detection of heavy metals in water: Recent advances and challenges

Strategies for preparation of chitosan based water-soluble fluorescent probes to detect Cr3+ and Cu2+ ions

The low solubility of chitosan (CS) imposes adverse effects on its application. In this work, one of the aims is to improve the water solubility of CS. By introducing water-soluble side chains to CS, this aim was achieved. Besides, fluorescent moieties were incorporated into the side chains, the fluorescent copolymers were endowed with Cr3+ and Cu2+ ions recognition ability. Firstly, a reversible addition-fragmentation chain transfer polymerization (RAFT) reagent with naphthalimide units and CC groups was prepared. Water-soluble monomer methyl acrylic acid (MAA) was employed in the RAFT polymerization. Thus, water-soluble polymer with fluorescent unit and -C ≡ C on both ends of the polymer was obtained. They were introduced into CS, and the CS-based fluorescent copolymers were obtained eventually. The amount of MAA introduced could be tuned to obtain three side chains of different lengths. It was found that the more MAA was introduced, the better the solubility of CS-TP was. The detection limits (LOD) of Cr3+ and Cu2+ were 44.6 nM and 54.5 nM, respectively. The detection of Cr3+ and Cu2+ ions is further combined with a mobile APP to realize real-time, portable, and visual detection. And the application in the logic gate, a new detection platform, is prepared.

Photonic Solutions for Challenges in Sensing

Sensing technologies support timely and critical decisions to save precious resources in healthcare, veterinary care, food safety, and environmental protection. However, the design of sensors demands strict technical characteristics for real-world applications. In this Viewpoint, we discuss the main challenges to tackle in the sensing field and how photonics represents a valuable tool in this sphere.

A selective and sensitive probes of chalcone derivative as a fluorescent chemosensor for the detection of Cr3+ ion

A new chalcone based chemosensor like 6-cinnamoylthiochroman-4-one (AZAN), has been designed and synthesized from 6-chlorothiochroman-4-one and cinnamaldehyde via keto ethylenic linkage. Its amino derivatives were synthesized by using urea (AZANU), thiourea (AZANTU) and 2,6-diamino pyridine (AZANPy) respectively and its metal ion sensing properties were investigated. The sensors can selectively recognize and sense the metal cations by showing different fluorescent characteristics at different concentrations. The fluorescence intensity shows remarkable enhancement by Cr3+ over other common metal ions (Cd2+, Hg2+ and Pb2+). The proposed mechanism can be confirmed by UV-Vis and emission titration. The newly synthesized receptor can sense the metal ions even in nano molar level. The binding or association constant and detection limit of chemosensor to Cr3+ are 1.684 × 105 M-1 and 0.2245 × 10-9 M respectively. A computation using the density functional theory was done to gain detailed insights into the electronic structures of the ligand and its derivatives. B3LYP function and 6-31G(d,p) basis set were used to optimize the ground-state geometry of the chemical and its derivatives.

A rapid and specific fluorescent probe based on aggregation-induced emission enhancement for mercury ion detection in living systems

Mercury is a harmful heavy metal that seriously threatens the environment and organisms. In this study, we combined the aggregation-induced emission mechanism and the advantages of peptides to design a novel tetraphenylene (TPE)-based peptide fluorescent probe, TPE-Cys-Pro-Gly-His (TPE-CPGH), in which the sulfhydryl group of Cys in the peptide chain and the imidazolium nitrogen provided by His were used to mimic the Hg2+ binding site of metalloproteins. The β-fold formed by Pro-Gly was used to promote the spatial coordination of the probe with Hg2+ and the formation of the coordination complex aggregates, these changes led to the "turn on" response to Hg2+. The detection of Hg2+ by TPE-CPGH not only showed high specificity and sensitivity (LOD=46.2 nM), but also had the advantages of fast response and applicability for detection over a wide pH range. Additionally, TPE-CPGH effectively detected Hg2+ in environmental samples, living cells and organisms due to its low cytotoxicity, high water solubility and cell membrane permeability. More interestingly, TPE-CPGH was also mitigated Hg2+ exposure-induced oxidative stress toxicity in vitro and in vivo.

Strategies for mitigation of pesticides from the environment through alternative approaches: A review of recent developments and future prospects

Chemical-based peticides are having negative impacts on both the healths of human beings and plants as well. The World Health Organisation (WHO), reported that each year, >25 million individuals in poor nations are having acute pesticide poisoning cases along with 20,000 fatal injuries at global level. Normally, only ∼0.1% of the pesticide reaches to the intended targets, and rest amount is expected to come into the food chain/environment for a longer period of time. Therefore, it is crucial to reduce the amounts of pesticides present in the soil. Physical or chemical treatments are either expensive or incapable to do so. Hence, pesticide detoxification can be achieved through bioremediation/biotechnologies, including nano-based methodologies, integrated approaches etc. These are relatively affordable, efficient and environmentally sound methods. Therefore, alternate strategies like as advanced biotechnological tools like as CRISPR Cas system, RNAi and genetic engineering for development of insects and pest resistant plants which are directly involved in the development of disease- and pest-resistant plants and indirectly reduce the use of pesticides. Omics tools and multi omics approaches like metagenomics, genomics, transcriptomics, proteomics, and metabolomics for the efficient functional gene mining and their validation for bioremediation of pesticides also discussed from the literatures. Overall, the review focuses on the most recent advancements in bioremediation methods to lessen the effects of pesticides along with the role of microorganisms in pesticides elimination. Further, pesticide detection is also a big challenge which can be done by using HPLC, GC, SERS, and LSPR ELISA etc. which have also been described in this review.

A Review on Recent Trends and Future Developments in Electrochemical Sensing

Electrochemical methods and devices have ignited prodigious interest for sensing and monitoring. The greatest challenge for science is far from meeting the expectations of consumers. Electrodes made of two-dimensional (2D) materials such as graphene, metal-organic frameworks, MXene, and transition metal dichalcogenides as well as alternative electrochemical sensing methods offer potential to improve selectivity, sensitivity, detection limit, and response time. Moreover, these advancements have accelerated the development of wearable and point-of-care electrochemical sensors, opening new possibilities and pathways for their applications. This Review presents a critical discussion of the recent developments and trends in electrochemical sensing.

Recent Trends in Chemical Sensors for Detecting Toxic Materials

Industrial development has led to the widespread production of toxic materials, including carcinogenic, mutagenic, and toxic chemicals. Even with strict management and control measures, such materials still pose threats to human health. Therefore, convenient chemical sensors are required for toxic chemical monitoring, such as optical, electrochemical, nanomaterial-based, and biological-system-based sensors. Many existing and new chemical sensors have been developed, as well as new methods based on novel technologies for detecting toxic materials. The emergence of material sciences and advanced technologies for fabrication and signal-transducing processes has led to substantial improvements in the sensing elements for target recognition and signal-transducing elements for reporting interactions between targets and sensing elements. Many excellent reviews have effectively summarized the general principles and applications of different types of chemical sensors. Therefore, this review focuses on chemical sensor advancements in terms of the sensing and signal-transducing elements, as well as more recent achievements in chemical sensors for toxic material detection. We also discuss recent trends in biosensors for the detection of toxic materials.

Recent Advances in the Application of Bionanosensors for the Analysis of Heavy Metals in Aquatic Environments

Heavy-metal ions (HMIs) as a pollutant, if not properly processed, used, and disposed of, will not only have an influence on the ecological environment but also pose significant health hazards to humans, making them a primary factor that endangers human health and harms the environment. Heavy metals come from a variety of sources, the most common of which are agriculture, industry, and sewerage. As a result, there is an urgent demand for portable, low-cost, and effective analytical tools. Bionanosensors have been rapidly developed in recent years due to their advantages of speed, mobility, and high sensitivity. To accomplish effective HMI pollution control, it is important not only to precisely pinpoint the source and content of pollution but also to perform real-time and speedy in situ detection of its composition. This study summarizes heavy-metal-ion (HMI) sensing research advances over the last five years (2019-2023), describing and analyzing major examples of electrochemical and optical bionanosensors for Hg2+, Cu2+, Pb2+, Cd2+, Cr6+, and Zn2+.

Green tea waste-derived carbon dots: efficient degradation of RhB dye and selective sensing of Cu2+ ions

Herein, we have synthesized carbon dots (CDs) using a one-step hydrothermal method from green tea waste, a biomass-derived source with high fluorescent properties and excellent solubility in water. The synthesis of CDs was confirmed through a comprehensive range of characterization techniques, including HRTEM (high-resolution transmission electron microscopy), XPS (X-ray photoelectron spectroscopy), and EDX (energy-dispersive X-ray spectroscopy). The optical properties of the synthesized CDs were assessed using UV-Vis spectroscopy and fluorescence (FL) spectroscopy. The CDs displayed exceptional stability across a wide pH range and various concentrations. Moreover, these CDs exhibited a photoluminescence quantum yield (PLQY) of 21.6%, indicating their efficiency in emitting fluorescent light upon excitation. The CDs also showcased their prowess in fluorometrically detecting Cu2+ ions, displaying high sensitivity and selectivity. They presented two distinct linear ranges: 0.02 to 50 µM and 50 to 100 µM, with recovery rates ranging from 94.2 to 104.06%. Moreover, under visible light irradiation, the CDs exhibited significant efficiency in the photocatalytic removal of dyes. Specifically, the CDs achieved degradation rate of 97.89% for Rhodamine B (RhB) within a 30-min irradiation period. In the context of RhB adsorption, it is evident that the experimental data align more closely with the Freundlich isotherm than the Langmuir isotherm. This is substantiated by a higher R2 value (0.97) for the Freundlich isotherm model compared to the Langmuir adsorption isotherm model (0.93). Notably, the adsorption kinetics was effectively described by pseudo first-order kinetics models. Overall, these results highlight the promising potential of CDs in applications such as environmental remediation and waste treatment processes due to their photocatalytic and sensing capabilities.

Electrochemical and Colorimetric Nanosensors for Detection of Heavy Metal Ions: A Review

Human exposure to acute and chronic levels of heavy metal ions are linked with various health issues, including reduced children's intelligence quotients, developmental challenges, cancers, hypertension, immune system compromises, cytotoxicity, oxidative cellular damage, and neurological disorders, among other health challenges. The potential environmental HMI contaminations, the biomagnification of heavy metal ions along food chains, and the associated risk factors of heavy metal ions on public health safety are a global concern of top priority. Hence, developing low-cost analytical protocols capable of rapid, selective, sensitive, and accurate detection of heavy metal ions in environmental samples and consumable products is of global public health interest. Conventional flame atomic absorption spectroscopy, graphite furnace atomic absorption spectroscopy, atomic emission spectroscopy, inductively coupled plasma-optical emission spectroscopy, inductively coupled plasma-mass spectroscopy, X-ray diffractometry, and X-ray fluorescence have been well-developed for HMIs and trace element analysis with excellent but varying degrees of sensitivity, selectivity, and accuracy. In addition to high instrumental running and maintenance costs and specialized personnel training, these instruments are not portable, limiting their practicality for on-demand, in situ, field study, or point-of-need HMI detection. Increases in the use of electrochemical and colorimetric techniques for heavy metal ion detections arise because of portable instrumentation, high sensitivity and selectivity, cost-effectiveness, small size requirements, rapidity, and visual detection of colorimetric nanosensors that facilitate on-demand, in situ, and field heavy metal ion detections. This review highlights the new approach to low-cost, rapid, selective, sensitive, and accurate detection of heavy metal ions in ecosystems (soil, water, air) and consumable products. Specifically, the review highlights low-cost, portable, and recent advances in smartphone-operated screen-printed electrodes (SPEs), plastic chip SPES, and carbon fiber paper-based nanosensors for environmental heavy metal ion detection. In addition, the review highlights recent advances in colorimetric nanosensors for heavy metal ion detection requirements. The review provides the advantages of electrochemical and optical nanosensors over the conventional methods of HMI analyses. The review further provides in-depth coverage of the detection of arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), manganese (Mn), nickel (Ni), lead (Pb), and zinc (Zn) ions in the ecosystem, with emphasis on environmental and biological samples. In addition, the review discusses the advantages and challenges of the current electrochemical and colorimetric nanosensors protocol for heavy metal ion detection. It provides insight into the future directions in the use of the electrochemical and colorimetric nanosensors protocol for heavy metal ion detection.

Hydrothermal Fabrication of Efficient Binary Pd/Ag2S Heterojunction Composites: Synthesis, Characterization, and Fluorometric Selective Sensing of Organophosphate Pesticides

Although many plasmonic nanosensors have been established for the detection of analytes, few of them are feasible for analyzing natural samples with very complex matrices because of insufficient method selectivity. To address this challenge, we propose an epitaxial and lattice-mismatch approach to the synthesis of a unique Pd/Ag2S nanostructure, which consists of a Pd segment with excellent plasmonic characteristics, and a highly stable Ag2S portion with minimum solubility product (Ksp(Ag2S) = 6.3 × 10- 50). Hence, Ag2S nanoparticles (NPs) and optimized (10.05 mmol/L) Pd/Ag2S composite were prepared using a hydrothermal method. The fabricated samples were characterized using different tools including UV-vis DRS, PL, powder XRD, TEM, and BET surface area measurements. Furthermore, the fluorometric sensing performance of the Ag2S and Pd/Ag2S samples was examined in the detection of organophosphate pesticides such as MLT, PRT, DZN, FNT, DCL, MCP, and CPS pesticides at room temperature. The quantitative detection of MLT, PRT, DZN, FNT, DCL, MCP, and CPS pesticides was achieved based on the Pd/Ag2S composite and organophosphate group-specific interaction. The optimized sensor exhibited a lower limit of detection (3.08 µM), excellent reproducibility, selectivity, and stability with an enhanced sensitivity of - 207.1 µA/µM cm2 (R2 = 0.98) in the range of 10 µM-100 µM for the detection of CPS pesticide. In addition, the fluorometric sensor has excellent selectivity, reproducibility, and stability, providing a feasible method for not only the detection of CPS pesticides but also other analytes in the future.

A Novel Polymer Inclusion Membrane-Based Green Optical Sensor for Selective Determination of Iron: Design, Characterization, and Analytical Applications

The design, characterization, and analytical application of a green optical sensor for the selective determination of Fe(II) ions is proposed. The sensor is based on the immobilization of the chromogenic reagent picolinaldehyde salicyloylhydrazone (SHPA) within a polymer inclusion membrane. To reduce solvent usage, the reagent was synthesized using a green mechanochemical procedure. The components for sensor preparation were optimized with a sequential simplex method and the optimal composition was found to be 0.59 g cellulose triacetate (base polymer), 0.04 g SHPA (chemosensor reagent), 4.9 mL dibutyl phthalate (plasticizer), and 38 mL dichloromethane (solvent). The conditions of iron analysis were also optimized resulting in pH 6 for aqueous solution, 90 min exposure time and 10 min short-term stability. The optical sensor showed a linear range from the limit of detection (0.48 µmol L-1) to 54 µmol L-1 Fe(II). The precision of the method was found to be 1.44% and 1.19% for 17.9 and 45 µmol L-1 Fe(II), respectively. The characteristics of the sensor allowed the design of a Fe(II)/Fe(III) speciation scheme. The methodology was successfully applied to the determination of iron in food preservatives, food additives, and dietary supplement. Additionally, the Fe speciation scheme was successfully applied to an agricultural fertilizer.

Ultrathin porous Pd metallene as highly efficient oxidase mimics for the colorimetric detection of chromium (VI)

Palladium (Pd)-based nanomaterials are the emerging class of catalysts with individual physiochemical properties. Unlike traditional catalysts, metallenes showed abundant active sites, large surface area, and high atomic utilization. Based on these benefits, we demonstrate a highly active 2D graphene-like Pd metallene with abundant accessible active sites serving as a highly efficient oxidase mimic. The structure and morphology of Pd metallenezymes were controlled to enhance the catalytic performance and to efficiently utilize all the Pd atoms. Pd metallenezymes with excellent oxidase-like activity were successfully applied for colorimetric-based chromium (VI) (Cr(VI)) detection in a real environment. 3,3',5,5'-Tetramethylbenzidine (TMB) was used as a typical chromogenic substrate catalyzed by Pd metallene to show that blue oxidized TMB (ox TMB) was significantly reduced to colorless TMB by the reducing agent 8-hydroxyquinoline (8-HQ). The reaction process was impressively reversed by the addition of Cr(VI), which interacted with 8-HQ to restore the blue color of TMB. Based on the above results, a facile and effective colorimetric sensing system for the detection of Cr(VI) with a low detection limit of 2.8 nM was developed and could be successfully applied to the detection of Cr(VI) in a real environment.

Functionalized Amphiphilic Block Copolymers and Complex Emulsions for Selective Sensing of Dissolved Metals at Liquid-Liquid Interfaces

Increasing contamination in potable water supplies necessitates the development of sensing methods that provide the speed and selectivity necessary for safety. One promising method relies on recognition and detection at the liquid-liquid interface of dynamic complex emulsions. These all-liquid materials transduce changes in interfacial tensions into optical signals via the coupling of their chemical, physical, and optical properties. Thus, to introduce selectivity, it is necessary to modify the liquid-liquid interface with an interfacially stable and selective recognition unit. To this end, we report the synthesis and characterization of amphiphilic block copolymers modified with metal chelators to selectively measure the concentrations of dissolved metal ions. We find that significant reduction in interfacial tensions arises upon quantitative addition of metal ions with high affinity toward functionalized chelators. Furthermore, measurements from UV-vis spectroscopy reveal that complexation of the block copolymers with metal ions leads to an increase in surface excess and surfactant effectiveness. We also demonstrate selective detection of iron(III) cations (Fe3+) on the μM levels even through interference from other mono-, di-, or trivalent cations in complex matrices of synthetic groundwater. Our results provide a unique platform that couples selective recognition and modulation of interfacial behaviors and demonstrates a step forward in the development of the multiplexed sensing device needed to deconvolute the complicated array of contaminants that comprise real-world environmental samples.

Advances in Portable Heavy Metal Ion Sensors

Heavy metal ions, one of the major pollutants in the environment, exhibit non-degradable and bio-chain accumulation characteristics, seriously damage the environment, and threaten human health. Traditional heavy metal ion detection methods often require complex and expensive instruments, professional operation, tedious sample preparation, high requirements for laboratory conditions, and operator professionalism, and they cannot be widely used in the field for real-time and rapid detection. Therefore, developing portable, highly sensitive, selective, and economical sensors is necessary for the detection of toxic metal ions in the field. This paper presents portable sensing based on optical and electrochemical methods for the in situ detection of trace heavy metal ions. Progress in research on portable sensor devices based on fluorescence, colorimetric, portable surface Raman enhancement, plasmon resonance, and various electrical parameter analysis principles is highlighted, and the characteristics of the detection limits, linear detection ranges, and stability of the various sensing methods are analyzed. Accordingly, this review provides a reference for the design of portable heavy metal ion sensing.

BSA-stabilized silver nanoclusters for efficient photoresponsive colorimetric detection of chromium(VI)

Hexavalent chromium is a highly toxic substance, which will pose a serious threat to human life and health and the entire ecosystem. Therefore, it is crucial to establish a simple and rapid detection method for hexavalent chromium. In this work, we fabricated bovine serum albumin-stabilized silver nanocluster (BSA-Ag₁₃ NC) which exhibited photoresponsive oxidase-like activity, catalyzing the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to the blue oxidized state TMB (oxTMB) in a short time. Interestingly, 8-hydroxyquinoline (8-HQ) can significantly inhibit the color reaction of TMB oxidation while Cr(VI) can interact specifically with 8-HQ to restore this chromogenic reaction. Based on the above facts, a colorimetric sensing system for detecting Cr(VI) was developed. The sensing system shows a wide linear range, and good selectivity, with a low detection limit of 2.32 nM. Moreover, this sensing system could be successfully applied to the detection of Cr(VI) in lake water, tap water, and sewage with satisfactory results.

Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Nanozymes have been widely used to construct colorimetric sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. The emergence of nanozymes greatly enhanced the detection sensitivity and stability of the colorimetric sensing platform. Recent significant research has focused on designing various sensors based on nanozymes with peroxidase-like activity for colorimetric analysis. However, with the deepening of research, nanozymes with peroxidase-like activity has also exposed some problems, such as weak affinity and low catalytic activity. In view of the above issues, existing investigations have shown that the catalytic properties of nanozymes can be improved by adding surface modification and changing the structure of nanomaterials. In this review, we summarize the recent trends and advances of colorimetric sensors based on several typical nanozymes with peroxidase-like activities, including noble metals, metal oxides, metal sulfides/metal selenides, and carbon and metal-organic frameworks (MOF). Finally, the current challenges and prospects of colorimetric sensors based on nanozymes with peroxidase-like activity are summarized and discussed to provide a reference for researchers in related fields.

Naphthalimide-Piperazine Derivatives as Multifunctional "On" and "Off" Fluorescent Switches for pH, Hg2+ and Cu2+ Ions

Novel 1,8-naphthalimide-based fluorescent probes NI-1 and NI-2 were designed and screened for use as chemosensors for detection of heavy metal ions. Two moieties, methylpyridine (NI-1) and hydroxyphenyl (NI-2), were attached via piperazine at the C-4 position of the napthalimide core resulting in a notable effect on their spectroscopic properties. NI-1 and NI-2 are pH sensitive and show an increase in fluorescence intensity at around 525 nm (switch "on") in the acidic environment, with pK_a values at 4.98 and 2.91, respectively. Amongst heavy metal ions only Cu²⁺ and Hg²⁺ had a significant effect on the spectroscopic properties. The fluorescence of NI-1 is quenched in the presence of either Cu²⁺ or Hg²⁺ which is attributed to the formation of 1:1 metal-ligand complexes with binding constants of 3.6 × 10⁵ and 3.9 × 10⁴, respectively. The NI-1 chemosensor can be used for the quantification of Cu²⁺ ions in sub-micromolar quantities, with a linear range from 250 nM to 4.0 μM and a detection limit of 1.5 × 10^-8 M. The linear range for the determination of Hg²⁺ is from 2 μM to 10 μM, with a detection limit of 8.8 × 10^-8 M. Conversely, NI-2 behaves like a typical photoinduced electron transfer (PET) sensor for Hg²⁺ ions. Here, the formation of a complex with Hg²⁺ (binding constant 8.3 × 10³) turns the green fluorescence of NI-2 into the "on" state. NI-2 showed remarkable selectivity towards Hg²⁺ ions, allowing for determination of Hg²⁺ concentration over a linear range of 1.3 μM to 25 μM and a limit of detection of 4.1 × 10^-7 M.

Advances in fabrication of molecularly imprinted electrochemical sensors for detection of contaminants and toxicants

Worldwide growing concerns about water contamination and pollution have increased significant interest in trace level sensing of variety of contaminants. Thus, there is demand for fabrication of low cost, miniaturized sensing device for in-situ detection of contaminants from the complex environmental matrices capable of providing selective and sensitive detection. Molecularly imprinted polymers (MIPs) has portrayed a substantial potential for selective recognition of various toxicants from a variety of environmental matrices, thus widely used as artificial recognition element in the electrochemical sensors (ECS) owing to their chemical stability, easy and low cost synthesis. The combination of nanomaterials modifiers with MIPs has endowed MIP-ECS with significantly improved sensing performance in the recent years, as the nanomaterial provide properties such as increased surface area, increased conductivity and electrocatalytic activity with enhanced electron transport phenomena, whereas MIPs provide selective recognition effect. In the present review, we have summarized the advances of MIP-ECS electrochemical sensors reported in last six years (2017-2022) for sensing of variety of contaminates including drugs, metal ions, hormones and emerging contaminates. Scope of computational modelling in design of sensitive and selective MIP-ECS is reviewed. We have focused particularly on the synthetic protocols for MIPs preparation including bulk, precipitation, electropolymerization, sol-gel and magnetic MIPs. Moreover, use of various nanomaterial as modifiers and sensitizers and their effects on the sensing performance of resulting MIP-ECS is described. Finally, the potential challenges and future prospects in the research area of MIP-ECS have been discussed.

Solvent-Free Pyrolysis Strategy for the Preparation of Biomass Carbon Dots for the Selective Detection of Fe3+ Ions

Biomass carbon dots (BCDs) have the advantages of being nontoxic, low cost and simple to prepare, have excellent optical properties, good biocompatibility and stability, and therefore have broad application prospects in areas such as heavy metal ion detection and optoelectronic devices. Herein, a simple, green, solvent-free method of preparing BCDs was developed. CDs with certain fluorescence properties were prepared by a solvent-free pyrolysis method at different temperatures using two abundant components (cellulose and lignin) of biomass resources as carbon sources. Both the cellulose CDs prepared at 300°C and the lignin CDs prepared at 350°C exhibited high quantum yields of 11.7% and 23.4%, respectively, a result that was mainly due to the high degree of graphitization. The analysis and results demonstrated the selectivity of CDs for the detection of various metal ion solutions. In particular, CDs are sensitive to Fe³⁺ and can be used as a fluorescent sensor for the detection of Fe³⁺, providing a more efficient, sustainable alternative for metal ion detection.

A dual-channel "on-off-on" fluorescent probe for the detection and discrimination of Fe3+ and Hg2+ in piggery feed and swine wastewater

Blue-fluorescent blood-CDs were synthesized through a one-pot hydrothermal method using a mixture of chicken blood and trisodium citrate and then explored as a fluorescent probe for detecting Fe³⁺ and Hg²⁺. The probe showed excellent selectivity and sensitivity towards Fe³⁺ and Hg²⁺ with a dramatic "on-off" fluorescence response. F^- recovered the fluorescence quenching by Fe³⁺, and Al³⁺ recovered the fluorescence quenching by Hg²⁺, showing an "off-on" fluorescence response. The blood-CDs were used as an "on-off-on" dual-channel fluorescent sensor for the detection and discrimination of Fe³⁺ and Hg²⁺ ions. The probe showed wide linear ranges for determination of Fe³⁺ (0-100 μM) and Hg²⁺ (0-120 μM) with low detection limits of 0.23 μM for Fe³⁺ and 0.17 μM for Hg²⁺. This probe was practically applied for the determination of Fe³⁺ and Hg²⁺ in piggery feed and wastewater with good recoveries. This work provides a fluorescent probe for the quantification of Fe³⁺ and Hg²⁺ in livestock feed and environmental water samples.

Optical Chemical Sensing of Iodide Ions: A Comprehensive Review for the Synthetic Strategies of Iodide Sensing Probes, Challenges, and Future Aspects

Among several anions, iodide (I^- ) ions play a crucial role in human biological activities. In it's molecular form (I₂ ), iodine is utilized for several industrial applications such as syntheses of medicines, fabric dyes, food additives, solar cell electrolytes, catalysts, and agrochemicals. The excess or deficiency of I^- ions in the human body and environmental samples have certain consequences. Therefore, the selective and sensitive detection of I^- ions in the human body and environment is vital for monitoring their overall profile. Amongst various analytical techniques for the estimation of I^- ions, optical-chemical sensing possesses the merits of high sensitivity, selectivity, and utilizing the least amount of sensing materials. The distinctive aims of this manuscript are (i) To comprehensively review the development of optical chemical sensors (fluorescent & colorimetric) reported between 2001-2021 using organic fluorescent molecules, supramolecular materials, conjugated polymers, and metal-organic frameworks (MOFs). (ii) To illustrate the design and synthetic strategies to create specific binding and high affinity of I^- ions which could help minimize negative consequences associated with its large size and high polarizability. (iii) The challenges associated with sensitivity and selectivity of I^- ions in aqueous and real samples. The probable future aspects concerning the optical chemical detection of I^- ions have also been discussed in detail.

Forward-Looking Roadmaps for Long-Term Continuous Water Quality Monitoring: Bottlenecks, Innovations, and Prospects in a Critical Review

Long-term continuous monitoring (LTCM) of water quality can bring far-reaching influences on water ecosystems by providing spatiotemporal data sets of diverse parameters and enabling operation of water and wastewater treatment processes in an energy-saving and cost-effective manner. However, current water monitoring technologies are deficient for long-term accuracy in data collection and processing capability. Inadequate LTCM data impedes water quality assessment and hinders the stakeholders and decision makers from foreseeing emerging problems and executing efficient control methodologies. To tackle this challenge, this review provides a forward-looking roadmap highlighting vital innovations toward LTCM, and elaborates on the impacts of LTCM through a three-hierarchy perspective: data, parameters, and systems. First, we demonstrate the critical needs and challenges of LTCM in natural resource water, drinking water, and wastewater systems, and differentiate LTCM from existing short-term and discrete monitoring techniques. We then elucidate three steps to achieve LTCM in water systems, consisting of data acquisition (water sensors), data processing (machine learning algorithms), and data application (with modeling and process control as two examples). Finally, we explore future opportunities of LTCM in four key domains, water, energy, sensing, and data, and underscore strategies to transfer scientific discoveries to general end-users.

Electrochemical detection of selected heavy metals in water: a case study of African experiences

The safety of water resources throughout the globe has been compromised by various human activities and climate change over the last decades.

Porous carbon-based polymer monolithic template implanted with an ion-receptor molecular probe as a solid-state ocular sensor for the selective targeting and capturing of cobalt ions

Polymer monolithic solid-state optical sensor offers exclusive selectivity and a faster response for ultra-trace Co(ii) ions, with excellent reusability and data reproducibility.

Applications of Nanotechnology in Smart Textile Industry: A Critical Review

•

Current trends of using nanotechnology in textile industries.

•

Nanotechnology-driven techniques for fabrication and modification of textile fibers.

•

Wearable nanotechnology for energy storage, sensing, drug release, optics, electronics and photonics.

•

Environmental concerns associated with nanotechnology processed textiles.

Background

In recent years, nanotechnology has been playing an important role in designing smart fabrics. Nanomaterials have been employed to introduce in a sustainable manner, antimicrobial, ultraviolet resistant, electrically conductive, optical, hydrophobic and flame-retardant properties into textiles and garments. Nanomaterial based smart devices are now also being integrated with the textiles so as to perform various functions such as energy harvesting and storage, sensing, drug release and optics. These advancements have found wide applications in the fashion industry and are being developed for wider use in defence, healthcare and on-body energy harnessing applications.

Aim of review

The objective of this work is to provide an insight into the current trends of using nanotechnology in the modern textile industries and to inspire and anticipate further research in this field. This review provides an overview of the most current advances concerning on-body electronics research and the wonders which could be realized by nanomaterials in modern textiles in terms of total energy reliance on our clothes.

Key scientific concepts of review

The work underlines the various methods and techniques for the functionalization of nanomaterials and their integration into textiles with an emphasis on cost-effectiveness, comfort, wearability, energy conversion efficiency and eco-sustainability. The most recent trends of developing various nanogenerators, supercapacitors and photoelectronic devices on the fabric are highlighted, with special emphasis on the efficiency and wearability of the textile. The potential nanotoxicity associated with the processed textiles due to the tendency of these nanomaterials to leach into the environment along with possible remediation measures are also discussed. Finally, the future outlook regarding progress in the integration of smart nano-devices on textile fabrics is provided.

Sensing Cd(II) Using a Disposable Optical Sensor Based on a Schiff Base Immobilisation on a Polymer-Inclusion Membrane. Applications in Water and Art Paint Samples

A disposable colour-changeable optical sensor based on an interesting polymer inclusion-membrane (PIM) was designed to determine Cd(II) ions in aqueous medium. The Schiff base 2-acetylpyridine benzoylhydrazone (2-APBH) immobilised on the polymer membrane was used as a sensing molecule. The amounts of the PIM components were optimised by a 3² fractional factorial design with two central points and two blocks. The best optical sensor composition consisted of 2.5 g of poly(vinylchloride) (PVC) as a base polymer, 3 mL of tributyl phosphate (TBP) as a plasticiser, and 0.02 g of 2-APBH as a reagent. The sensor showed a good linear response in the range from 0.02 mg L⁻¹ (limit of detection) to 1 mg L⁻¹ of Cd(II) under the following experimental conditions: pH 9.5 (adjusted using ammonium chloride buffer solution at 0.337 mol L⁻¹), 60 min of exposure time plus 2 min of sonication (pulses at 2 s intervals), and 10 min of short-term stability. The relative standard deviation of the method was determined to be 4.04% for 0.4 mg L⁻¹ of Cd(II). The optical sensor was successfully applied to the determination of Cd(II) in natural-water and art-paint samples.

Ligand-protected nanoclusters and their role in agriculture, sensing and allied applications

Nano biotechnology, when coupled with green chemistry, can revolutionize human life because of the vast opportunities and benefits it can offer to the quality of human life. Luminescent metal nanoclusters (NCs) have recently developed as a potential research area with applications in different areas like medical, imaging, sensing etc. Recently these new candidates have proved to be beneficial in the food supply chain enabling controlled release of nutrients, pesticides and as nanosensors for the detection of contaminants and play roles in healthy food storage and maintaining food quality. An assortment of nanomaterials has been employed for these applications and reviews have been published on the use of nanotechnology in agriculture. Ligand-protected metal nanoclusters are a distinctive class of small organic-inorganic nanostructures that garnered immense research interest in recent years owing to their stability at specific "magic size" compositions along with tunable properties that make them promising candidates for a wide range of nanotechnology-based applications. This review tries to consolidate the recent developments in the area of ligand-protected nanoclusters in connection with the detection of pesticides, food contaminants, heavy metal ions and plant growth monitoring for healthy agricultural practices. Its antimicrobial activity to manage the microbial contamination is highlighted. The review also throws light on the various perspectives by which food production and allied areas will be transformed in future.

Nanostructured Shell-Layer Artificial Antibody with Fluorescence-Tagged Recognition Sites for the Trace Detection of Heavy Metal Ions by Self-Reporting Microsensor Arrays

Herein, a strategy for a metal ion-imprinted artificial antibody with recognition sites tagged by fluorescein was carried out to construct the selective sites with a sensitive optical response signal to the specific metal ion. The synthesized silica nanoparticles were modified by the derivative residue group of 3-aminopropyltriethoxysilane conjugated with a 4-chloro-7-nitro-1,2,3-benzoxadiazole (NBD-Cl) molecule through the hydrolysis and condensation reactions. The as-prepared silica nanoparticles were encapsulated by metal ion (Cu²⁺, Cd²⁺, Hg²⁺, and Pb²⁺)-imprinted polymers with nanostructured layers through the copolymerization of ethyl glycol dimethyl methacrylate (EGDMA) as a cross-linker, AIBN as an initiator, metal ions as template molecules, AA as a functional monomer, and acetonitrile as a solvent. The layers of molecular imprinted polymers (MIPs) with a core-shell structure removed template molecules by EDTA-2Na to retain the cavities and spatial sizes to match the imprinted metal ions. The microsensor arrays were achieved by the self-assembly technique of SiO₂@MIP nanoparticles on the etched silicon wafer with regular dot arrays. The nanostructured-shell layers with fluorescence-tagged recognition sites rebound metal ions by the driving force of concentration difference demonstrates the high selective recognition and sensitive detection to heavy metal ions through the decline of fluorescence intensity. The LOD concentration for four metal ions is down to 10^-9 mol·L^-1. The method will provide biomimetic synthesis, analyte screen, and detection of highly dangerous materials in the environment for theoretical foundation and technological support.