Recent advances and trends of molecularly imprinted polymers for specific recognition in aqueous matrix: Preparation and application in sample pretreatment

Fabrication of magnetic hydrophilic imprinted polymers via two-step immobilization approach for targeted detecting bisphenol A

Molecularly imprinted polymer with water-compatibility for effective separation and enrichment of targeted trace pollutants from complicated matrix has captured extensive attention in terms of their high selectivity and matrix compatibility. This study focuses on modified β-cyclodextrin is used as a hydrophilic functional monomer to develop magnetic molecularly imprinted polymers (MMIPs). MMIPs were prepared using Fe3O4 nanoparticles as carriers and bisphenol A (BPA) as templates using a two-step fixation strategy and surface imprinting technology. The structural characteristic and binding properties of the prepared MMIPs were thoroughly studied. The MMIPs exhibited high crystallinity, high adsorption capacity, fast rebinding rate, remarkable selectivity and distinguish reusability. In addition, through magnetic solid-phase extraction separation technology and high-performance liquid chromatography ultraviolet quantitative detection technology, MMIPs are used for selective enrichment and detection of BPA in complex media such as environmental water and milk. This work provides a new route to construct the hydrophilic molecularly imprinted materials and a new sight on developing more effective sample pretreatment strategies for monitoring targeted pollution in complicated aqueous media.

Fabrication of molecularly imprinted carbon nanotubes integrating ionic liquids for efficient detection of perfluoroalkyl carboxylic acid in environmental water

It is extremely significant while challenging to accurately detect low-levels of perfluoroalkyl carboxylic acid compounds (PFCAs) in environmental water. Herein, adopting perfluorotetradecanoic acid as the dummy template, selective molecularly imprinted composites (CNTs@ILs@MIPs) grafted carbon nanotubes integrating hydrophilic ionic liquids were successfully prepared via surface imprinting and dummy-template imprinting techniques. The obtained CNTs@ILs@MIPs were applied as selective extraction adsorbent for specifically extract PFCAs in environmental water coupled with gas chromatography-mass spectrometry quantification. Detailed studies were conducted on the main preparation parameters and extraction conditions. The CNTs@ILs@MIPs displayed excellent adsorptivity, and the established method exhibited low LODs (0.60-1.64 ng L-1), wide linearity with R2 above 0.9994, and satisfactory adsorption recoveries (80.5-112.5%) for seven PFCAs. This proposed method provides a new applicable approach for the detection of targeted pollutants in environmental water by utilizing the high affinity and recognition ability of molecularly imprinted carbon nanotube functional materials modified with ionic liquids.

Recent advances in molecularly imprinted polymers (MIPs) for visual recognition and inhibition of α-dicarbonyl compound-mediated Maillard reaction products

α-Dicarbonyl compounds (α-DCs) are important intermediates and precursors of harmful Maillard reaction products (e.g., acrylamide and late glycosylation end-products), and they exist widely in thermoprocessed sugar- or fat-rich foods. α-DCs and their end-products are prone to accumulation in the human body and lead to the development of various chronic diseases. Therefore, detection of α-DCs and their associated hazards in food samples is crucial. This paper reviews the preparation of molecularly imprinted polymers (MIPs) enabling visual intelligent responses and the strategies for recognition and capture of α-DCs and their associated hazards, and provides a comprehensive summary of the development of visual MIPs, including integration strategies and applications with real food samples. The visual signal responses as well as the mechanisms for hazard recognition and capture are highlighted. Current challenges and prospects for visual MIPs with advanced applications in food, agricultural and environmental samples are also discussed. This review will open new horizons regarding visual MIPs for recognition and inhibition of hazards in food safety.

MOF-derived porous carbon microspheres Ni@C-acid as solid-phase microextraction coating for extraction of polycyclic aromatic hydrocarbons from tea infusions

The improvement of the stability and adsorption properties of materials on targets in sample pre-treatment has long been an objective. Extensive efforts have been made to achieve this goal. In this work, metal-organic framework Ni-MOF precursors were first synthesized by solvothermal method using polyvinylpyrrolidone (PVP) as an ideal templating agent, stabiliser and nanoparticle dispersant. After carbonization and acid washing, the nanoporous carbon microspheres material (Ni@C-acid) was obtained. Compared with the material without acid treatment (Ni@C), the specific surface area, pore volume, adsorption performance of Ni@C-acid were increased. Thanks to its excellent characteristics (high stability, abundant benzene rings), Ni@C-acid was used as fiber coatings in headspace solid-phase microextraction (HS-SPME) technology for extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) prior to gas chromatography-flame ionization detector (GC-FID) analysis. The experimental parameters of extraction temperature, extraction time, agitation speed, desorption temperature, desorption time and sodium chloride (NaCl) concentration were studied. Under optimal experimental conditions, the wide linear range (0.01-30 ng mL-1), the good correlation coefficient (0.9916-0.9984), the low detection limit (0.003-0.011 ng mL-1), and the high enrichment factor (5273-13793) were obtained. The established method was successfully used for the detection of trace PAHs in actual tea infusions samples and satisfied recoveries ranging from 80.94-118.62 % were achieved. The present work provides a simple method for the preparation of highly stable and adsorbable porous carbon microsphere materials with potential applications in the extraction of environmental pollutants.

Simultaneously Selective Separation of Zearalenone and Four Aflatoxins From Rice Samples Using Co-Pseudo-Template Imprinted Polymers With MIL-101(Cr)-NH2 as Core

A novel approach for the simultaneous separation of zearalenone (ZEN) and four types of aflatoxins (AFB1, AFB2, AFG1 and AFG2) from rice samples was presented. This approach utilized modified MIL-101(Cr)-NH2 as core, with molecularly imprinted polymers (MIPs) serving as the shell. The MIL-101(Cr)-NH2 was prepared via ring-opening reaction, while the imprinted polymers were synthesized using warfarin and 4-methylumbelliferyl acetate as co-pseudo template, ethylene glycol dimethacrylate as the cross-linker and azobisisobutyronitrile as initiator. The resulting co-pseudo-template-MIPs (CPT-MIPs) were thoroughly characterized and evaluated. Adsorption studies demonstrate that the adsorption process of CPT-MIPs follows a chemical monolayer adsorption mechanism, with imprinted factors ranging from 1.24 to 1.52 and selective factors ranging from 1.29 to 1.52. Self-made columns were prepared, and the method for separation was developed and validated. The limit of detections ranged from 0.12 to 2.09 μg/kg, and the limit of qualifications ranged from 1.2 to 6.25 μg/kg. To assess the reliability of the method, ZEN and AFs were spiked at three different levels, and the recoveries ranged from 79.53 to 94.58%, with relative standard deviations of 2.90-5.78%.

Advances in molecularly imprinted materials for selective adsorption of phenolic pollutants from the water environment: Synthesis, applications, and improvement

The application of molecularly imprinted material (MIM) is widely employed as a material for removing phenolic pollutants from the water environment, owing to its exceptional capacity for selective adsorption and high sensitivity. In this paper, the preparation principle, bonding types, and preparation methods of MIM have been comprehensively introduced. Meanwhile, according to the binding type of MIM with phenolic pollutants, three categories of hydroxyl bonding, hydroxyl carboxyl bonding, and hydroxyl nitro bonding were carried out to explain its application to phenolic pollutants. Strategies for addressing the challenges of selective instability, high regeneration costs, and template leakage in MIM applications were summarized. These strategies encompassed the introduction of superior carriers, enhancements in preparation processes, and the utilization of molecular dynamics simulation-assisted technology. Finally, the prospects in the three aspects of material preparation, process coupling, and recycling. In summary, this paper has demonstrated the potential of utilizing MIM for the selective treatment of phenolic pollutants from the water environment.

Three-Dimensional Printing of Molecularly Imprinted Polymers by Digital Light Processing for Copper Ion Sequestration

Highly structured, molecularly imprinted polymer (MIP) networks for copper(II) ion sequestration have been realized using the additive manufacturing technology. Photopolymerizable formulations with acrylic functional monomers and two different porogens (water and methanol) in different ratios were studied to produce emulsions with 50 vol% of the internal phase. The results of morphological characterization indicate that all MIPs have cauliflower-like multiscale structures that change as a function of the solvent combination and fabrication process. X-ray fluorescence microscopy maps presented a layered structure and homogeneous distribution of copper in the printed MIP. Copper(II) ion adsorption-desorption tests were performed on MIPs prepared using a three-dimensional (3D) printing approach and MIPs prepared by bulk polymerization. Results indicate that the 3D printed MIP is able to absorb copper up to ten times more efficiently than the nonprinted one and the printed MIP with 100% water content has the highest imprint recognition.

A novel electrochemical sensor based on dual-functional MMIP-CuMOFs for both target recognition and signal reporting and its application for sensing bisphenol A in milk

In this work, novel magnetic molecularly imprinted CuMOFs (MMIP-CuMOFs) were synthesized and applied to construct an electrochemical bisphenol A sensor. The constructed sensor used an electrode modified with reduced graphene oxide (RGO/GCE) as the sensing platform to improve its stability and sensitivity. The Fe3O4 nanoparticles in magnetic MOFs simplified the preparation process. Moreover, the combination of CuMOFs and molecular imprinting methodology was beneficial for improving the detection specificity, and the electroactive copper hexacyanoferrate generated by the reaction of Cu2+ in CuMOFs with potassium ferricyanide was used as the signal probe. The sensor showed a good linear relationship in the range of 0.5 to 500 nmol/L, with a low detection limit of 0.18 nmol/L. In addition, the sensor had good selectivity, repeatability (RSD = 2.59 %), and a good recovery rate for actual milk sample detection (99.8-102.49 %). This technique holds great promise for the detection of detrimental substances in food.

The construction of highly selective surface molecularly imprinted polymers based on Cu(II) coordination for the detection of bisphenol A

Herein, we designed and constructed a highly selective MIPs for bisphenol A (BPA) named Cu-MIPs@CS based on Cu(II) coordination. The synthesis of Cu-MIPs@CS employed a dummy template strategy and surface imprinting technology, with chitosan (CS) as the substrate linked to imprinted layers via Cu2+ bridging. 4-vinylpyridine acted as the functional monomer, capable of forming a complex with the template ketoprofen, while ethylene glycol dimethacrylate served as the cross linker. Cu-MIPs@CS exhibited a significantly enhanced imprinting factor of 14.78 for BPA, which was approximately 6.6 times higher than that of imprinted materials without Cu2+ (MIPs@CS). Cu-MIPs@CS exhibited a selective factor of 12.74 towards resorcinol, which possessed identical functional groups but a smaller size than BPA, representing an enhancement of selectivity by 12.25-fold compared to MIPs@CS. More importantly, Cu-MIPs@CS exhibited a superior discrimination ability between BPA and its structural analogue, diphenolic acid, with an excellent selective factor of 2.93, highlighting its significance in distinguish the structural analogue of BPA. In contrast, MIPs@CS lack sufficient selectivity to differentiate between them. Through exploration of adsorption mechanism of Cu-MIPs@CS, it was demonstrated that the incorporation of Cu2+ significantly reduced nonspecific adsorption, but also facilitated the creation of more selective imprinted cavities by introducing metal coordination, thereby notably enhancing the selectivity of Cu-MIPs@CS. Finally, the developed Cu-MIPs@CS were applied as the solid phase extraction adsorbent and combined with HPLC-DAD detection to establish an analytical method towards BPA in drinking water samples. The limit of detection of the method was 0.14 μg L-1 and recoveries ranged from 95.6 % to 101 %. This work provided broad prospects for construction of highly selective MIPs and accurate quantification of trace amounts of BPA.

Novel dual-recognition electrochemical biosensor for the sensitive detection of AFM1 in milk

Aflatoxin M1 (AFM1) is a highly carcinogenic and toxic compound that is commonly found in dairy foods such as milk. We developed an electrochemical MIP (molecularly imprinted polymer) and aptamer (Apt) based aptasensor (Apt-Au@PEIM/AFM1/MIP-Apt/AuNPs)/GCE) with dual-recognition signal amplification to detect AFM1 in milk. The MIP-Apt/AuNP/GCE sensor was prepared by synthesizing an MIP film through the electropolymerization of resorcinol on gold nanoparticles-modified electrodes. The dropwise addition of our cApt-Au@PEIM signal amplification probe could enhance the current signal response and improve the sensitivity of the sensor to detect AFM1. The AFM1 present in milk could prevent the probe from binding to the sensor, thereby drastically reducing the current signal. Under optimal experimental conditions, the sensor exhibits a linear range of 0.01-200 nM and a limit of detection of 0.07 nM (S/N = 3). The developed dual-recognition aptasensor would provide a novel and rapid method for specific detection of AFM1 in milk.

Key steps for improving bacterial SERS signals in complex samples: Separation, recognition, detection, and analysis

Rapid and reliable detection of pathogenic bacteria is absolutely essential for research in environmental science, food quality, and medical diagnostics. Surface-enhanced Raman spectroscopy (SERS), as an emerging spectroscopic technique, has the advantages of high sensitivity, good selectivity, rapid detection speed, and portable operation, which has been broadly used in the detection of pathogenic bacteria in different kinds of complex samples. However, the SERS detection method is also challenging in dealing with the detection difficulties of bacterial samples in complex matrices, such as interference from complex matrices, confusion of similar bacteria, and complexity of data processing. Therefore, researchers have developed some technologies to assist in SERS detection of bacteria, including both the front-end process of obtaining bacterial sample data and the back-end data processing process. The review summarizes the key steps for improving bacterial SERS signals in complex samples: separation, recognition, detection, and analysis, highlighting the principles of each step and the key roles for SERS pathogenic bacteria analysis, and the interconnectivity between each step. In addition, the current challenges in the practical application of SERS technology and the development trends are discussed. The purpose of this review is to deepen researchers' understanding of the various stages of using SERS technology to detect bacteria in complex sample matrices, and help them find new breakthroughs in different stages to facilitate the detection and control of bacteria in complex samples.

Acid-assisted ultrasonic preparation of nitrogen-doped MXene quantum dots for the efficient fluorescence "off-on-off" detection of Zn(II) in water and oxalic acid in vegetables

A novel fluorescence "off-on-off" probe was presented to detect Zn(II) and oxalic acid (OA) based on nitrogen-doped MXene quantum dots (N-MQDs), which were synthesized by an ultrasound approach at room temperature with nitric acid and ethylenediamine. These N-MQDs displayed small size (<10 nm), water dispersibility, and good photoluminescence. Furthermore, the N-MQDs showed an selective response towards Zn(II) through fluorescence enhancement, with a limit of detection (LOD) calculated as 0.127 μM in the linear range of 0-20 μM. Then, the fluorescence of N-MQDs/Zn(II) system could be selectively quenched after adding OA, with an effective response in the range from 0 to 20 μM (LOD: 0.883 μM). The fluorescence "turn-on" and "turn-off" properties of N-MQDs were resulted from the intramolecular charge transfer (ICT) of Zn(II) and the coordination between OA and Zn(II), respectively. This sensing platform was successfully applied for Zn(II) and OA detection in actual environmental and vegetable samples.

Molecularly imprinted electrochemical sensor based on metal-covalent organic framework for specifically recognizing norfloxacin from unpretreated milk

Here, a molecularly imprinted electrochemical sensor (MIECS) was designed and fabricated for specifically monitoring norfloxacin (NFX), an entirely synthetic antibiotic. In which, Cu2+ dopped covalent organic framework (COF) was used to connect NFX imprinting layer and glassy carbon electrode through covalence. Under optimized conditions, the linear range is as wide as 5 orders of magnitude, and the detection limit is 5.94 × 10-3 μM (estimated based on S/N = 3). Average recoveries are among 92.4%-99.0% with relative standard deviations ≤ 4.05% (n = 3) in (spiked) whole, low-fat, and skimmed milk, validated by independent HPLC assays. The excellent performance can be ascribed to the significant recognition and enriching ability of the imprinting layer, improved conductivity of Cu2+ dopped covalent organic framework, and high stability of covalence between layers. We hope the work will act as a model of MIECSs for rapidly and selectively detecting trace drug residue in complex real samples.

Zinc (Ⅱ) functionalized magnetic geopolymer as sorbents for rapid extraction of Fluoroquinolones in food prior to quantification by UHPLC-MS/MS

A novel Zn@MGeo sorbent was easily constructed and can bind with FQs through the synergistic effect of electrostatic interaction and coordination. With the Zn@MGeo as sorbent, a MSPE-UHPLC-MS/MS method was established for simultaneous detection of FQs in complex matrices. The whole extraction process could be completed using 6.0 mg sorbent within 10 min under the optimal conditions. The established quantitative method obtained a wide linear range (0.01-200 μg/kg, R² > 0.9987), high sensitivity (LODs: 0.005-0.05 μg/kg) and negligible matrix effect. The method was applied for analysis of real samples, with recoveries between 75.6% and 103.7%. In addition, the sorbent could be reused at least 9 times without reducing the adsorption performance. In general, the established method not only proposes a novel sorbent for FQs extraction, but also provides a powerful tool for rapid and sensitive detection of FQs in food matrices with practical application value.

Preparation and Application Progress of Imprinted Polymers

Due to the specific recognition performance, imprinted polymers have been widely investigated and applied in the field of separation and detection. Based on the introduction of the imprinting principles, the classification of imprinted polymers (bulk imprinting, surface imprinting, and epitope imprinting) are summarized according to their structure first. Secondly, the preparation methods of imprinted polymers are summarized in detail, including traditional thermal polymerization, novel radiation polymerization, and green polymerization. Then, the practical applications of imprinted polymers for the selective recognition of different substrates, such as metal ions, organic molecules, and biological macromolecules, are systematically summarized. Finally, the existing problems in its preparation and application are summarized, and its prospects have been prospected.

Recent advances in the removal of emerging contaminants from water by novel molecularly imprinted materials in advanced oxidation processes-A review

Recently, there has been a global focus on effectively treating emerging contaminants (ECs) in water bodies. Advanced oxidation processes (AOPs) are the primary technology used for ECs removal. However, the low concentrations of ECs make it difficult to overcome the interference of background substances in complex water quality, which limits the practical application of AOPs. To address this limitation, many researchers are developing new catalysts with preferential adsorption. Molecular imprinting technology (MIT) combined with conventional catalysts has been found to effectively enhance the selectivity of catalysts for the targeted catalytic degradation of pollutants. This review presents a comprehensive summary of the progress made in research on molecularly imprinted polymers (MIPs) in the selective oxidation of ECs in water. The preparation methods, principles, and control points of novel MIP catalysts are discussed. Furthermore, the performance and mechanism of the catalysts in photocatalytic oxidation, electrocatalytic oxidation, and persulfate activation are analyzed with examples. The possible ecotoxicological risks of MIP catalysts are also discussed. Finally, the challenges and prospects of applying MIP catalysts in AOP are presented along with proposed solutions. This review provides a better understanding of using MIP catalysts in AOPs to target the degradation of ECs.

Conjugated hypercrosslinked polymers imprinted with 3,5-dinitrosalicylic acid for the fluorescent determination of α-amylase activity

The discovery of a series of coupling reactions between various building blocks has driven the development of porous organic polymers, but the common usage of expensive and air-sensitive organometallic catalysts and complex procedures in harsh syntheses has limited their expansion. A microporous hypercrosslinked polymer (HCP) was synthesized by polymerizing a naphthalene monomer and a 1,4-dimethoxybenzene crosslinker using Friedel-Crafts alkylation over an FeCl₃ catalyst and imprinted with 3,5-dinitrosalicylic acid (DNS). The DNS-molecularly-imprinted HCPs (MIHCPs) were characterized as having IUPAC Type I mesoporosity, a specific surface area of 1134 m² g^-1, a monolayer adsorption capacity of 116 cm² g^-1, pore sizes ranging from 5 to 8.5 Å, amorphous frameworks, and distinctive absorption and emission bands by N₂ adsorption/desorption analyses, scanning and transmission electron microscopies, and FTIR, UV-Vis, and fluorescence spectrometries. The π-conjugated imprinted framework endowed the MIHCPs with 405-nm fluorescent emission at a 330-nm excitation and dynamic quenching, which was confirmed by changes in fluorescence lifetime and followed a linear Stern-Volmer plot against 1.0-200 μM DNS template molecules under optimized conditions of a pH 7.0 buffer, an MIHCP concentration of 125 μg mL^-1, and a 3.0-min equilibration time. The MIHCPs exhibited a high imprinted factor of 8.7 against nonimprinted HCP and a selectivity of 8.63 against reduced DNS, which enabled fluorometric detection of DNS molecules produced by the hydrolysis of starch with microbial, salivary, and pancreatic α-amylases and the subsequent redox incubation with the DNS oxidant. The fluorometric measurement of α-amylase activity was higher in accuracy and precision (RSD: 2.6-2.8% vs. 3.9-4.0%) than conventional UV-Vis spectrometry because the excellent fluorescent sensitivity and imprinting selectivity of the MIHCP probes enabled the use of higher dilution factors with weaker matrix effects.

Easily operated COF-based monolithic sponges as matrix clean-up materials for non-targeted analysis of chemical hazards in oil-rich foods

Non-targeted analysis of chemical hazards in foods plays a crucial role in controlling food safety. However, because it brings forward high demand for sample pretreatment, materials suitable for the pretreatment of foods, especially animal foods, are rare. Herein, covalent organic frameworks (COF)-based monolithic materials were constructed by three successive steps: preparation of polydimethylsiloxane (PDMS) sponge using sugar cube as a sacrificial template, loading of a heteroporous COF on PDMS sponge via ultrasonic or in-situ growth method, coating of the obtained PDMS@COF by polydopamine (PDA) network. As-prepared PDMS@COF@PDA sponges were demonstrated to work well in sample pretreatment of animal foods for non-targeted analysis of chemical hazards. After a simple vortex treatment for about 2 min, more than 98% triglycerides, the main interfering matrix components in animal foods, could be removed from lard and pork samples, accompanied by "full recovery" (recovery efficiencies: ≥63%) of 44 chemical hazards with different physicochemical properties. Besides providing promising sample pretreatment materials for non-targeted food safety analysis, this work also paves a feasible way to improve COF-based monolithic materials and thus promote their practical applications, because we found that the introduction of PDA network on COF-based monolithic material surface could play a role in "killing three birds with one stone": enhancing the stability of the materials by overcoming the detachment of COF during operations; controllably adjusting hydrophobic and hydrogen-bonding interactions on the material surface to promote the removal of triglycerides; weakening the hydrophobic and π-π interactions between COF and chemical hazards to increase the recoveries of chemical hazards.

Molecularly imprinted 3D SERS sensor with inorganic frameworks for specific and recyclable SERS sensing application

Poor selectivity and reusability of Au/Ag nanostructures are the main challenges for surface-enhanced Raman spectroscopy (SERS) in real sample detection. Herein, a novel specific and reusable three-dimensional (3D) SERS sensor with dual functions of selective trapping and photocatalytic degradation was designed. Firstly, Au-Ag bimetallic nanoparticles decorated silicon nanowires array (SiNWs-AuAg) were prepared as 3D SERS substrate. Then, silicon-based inorganic-framework molecularly imprinted TiO₂ (TiO₂@SiMIP) was synthesized and immobilized on SiNWs-AuAg by using rhodamine 6G (R6G) as template molecule. Owing to the excellent SERS performance of SiNWs-AuAg and the specific affinity of TiO₂@SiMIP to template molecule, the prepared SERS sensor enables sensitive and selective detection of R6G in food samples with a limit of detection (LOD) of 0.27 nM. In addition, due to the photocatalysis of TiO₂ and the stability of silicon-based inorganic framework, the residual templates in TiO₂@SiMIP can be completely removed by UV irradiation, and the imprinted cavity of regenerated sensors still maintained good selectivity after regeneration by UV irradiation.

Comprehensive review on patulin and Alternaria toxins in fruit and derived products

Mycotoxins are toxic secondary metabolites produced by certain fungi, which can contaminate various food commodities, including fruits and their derived products. Patulin and Alternaria toxins are among the most commonly encountered mycotoxins in fruit and their derived products. In this review, the sources, toxicity, and regulations related to these mycotoxins, as well as their detection and mitigation strategies are widely discussed. Patulin is a mycotoxin produced mainly by the fungal genera Penicillium, Aspergillus, and Byssochlamys. Alternaria toxins, produced by fungi in the Alternaria genus, are another common group of mycotoxins found in fruits and fruit products. The most prevalent Alternaria toxins are alternariol (AOH) and alternariol monomethyl ether (AME). These mycotoxins are of concern due to their potential negative effects on human health. Ingesting fruits contaminated with these mycotoxins can cause acute and chronic health problems. Detection of patulin and Alternaria toxins in fruit and their derived products can be challenging due to their low concentrations and the complexity of the food matrices. Common analytical methods, good agricultural practices, and contamination monitoring of these mycotoxins are important for safe consumption of fruits and derived products. And Future research will continue to explore new methods for detecting and managing these mycotoxins, with the ultimate goal of ensuring the safety and quality of fruits and derived product supply.

Application of Molecularly Imprinted Electrochemical Biomimetic Sensors for Detecting Small Molecule Food Contaminants

Environmental chemical contaminants in food seriously impact human health and food safety. Successful detection methods can effectively monitor the potential risk of emerging chemical contaminants. Among them, molecularly imprinted polymers (MIPs) based on electrochemical biomimetic sensors overcome many drawbacks of conventional detection methods and offer opportunities to detect contaminants with simple equipment in an efficient, sensitive, and low-cost manner. We searched eligible papers through the Web of Science (2000-2022) and PubMed databases. Then, we introduced the sensing mechanism of MIPs, outlined the sample preparation methods, and summarized the MIP characterization and performance. The classification of electrochemistry, as well as its advantages and disadvantages, are also discussed. Furthermore, the representative application of MIP-based electrochemical biomimetic sensors for detecting small molecular chemical contaminants, such as antibiotics, pesticides, toxins, food additives, illegal additions, organic pollutants, and heavy metal ions in food, is demonstrated. Finally, the conclusions and future perspectives are summarized and discussed.

Molecularly imprinted polymers for sensing gaseous volatile organic compounds: opportunities and challenges

Chemical sensors that can detect volatile organic compounds (VOCs) are the subject of extensive research efforts. Among various sensing technologies, molecularly imprinted polymers (MIPs) are regarded as a highly promising option for their detection with many advantageous properties, e.g., specific binding-site for template molecules, high recognition specificity, ease of preparation, and chemical stability. This review covers recent advances in the sensing application of MIPs toward various types of VOCs (e.g., aliphatic and aromatic compounds). Particular emphasis has been placed on multiple approaches to the synthesis of MIP-based VOC sensors in association with their performance and sensing mechanisms. Current challenges and opportunities for new VOC-sensing applications are also discussed based on MIP technology.

Water-compatible Janus molecularly imprinted particles with mouth-like opening: Rapid removal of pharmaceuticals from hospital effluents

Pharmaceuticals in hospital effluents, often discharged into the public sewage network without sufficient treatment, have shown negative impacts to the human health and aquatic environment. However, the conventional adsorbents used to remove these micropollutants had several deficiencies, including slow uptake kinetics and poor selectivity. To overcome these challenges, water-compatible Janus MIP particles (J-MIPs) with mouth-like openings were synthesized using seeded interfacial polymerization in this work. Among the series of J-MIPs, the selected J-MIP₃ showed fast binding kinetics (∼40 s) towards the target pollutant. The theoretical and instrumental analysis suggested that the electrostatic interaction, hydrogen bond and hydrophobic reaction constituted the dominant mechanism for J-MIP₃'s recognition of target pharmaceutical. Selectivity and robustness tests indicated that the synthetic method was promising in practical application. Finally, the feasibility of the J-MIP₃ fixed-bed column in the rapid removal of propranolol (PRO) from hospital effluents was successfully demonstrated. Compared to the activated carbon fixed-bed column, the J-MIP₃ fixed-bed column showed at least 7-fold enhancement in its treatment efficiency. To the best of our knowledge, this is the first time that the accelerated mass transfer and fast removal of the pharmaceutical from wastewater have been achieved by the synthetic receptor with asymmetric structure. We believe the present study will open new avenues for the development of multi-functional molecularly imprinted polymers as well as Janus materials in environmental science.

A deep eutectic solvent magnetic molecularly imprinted polymer for extraction of laminarin from seaweeds

Magnetic molecular imprinted polymers (MIPs) based on 4-vinylbenzyltrimethylammonium chloride (VBTAC) and 4-vinylbenzoic acid (VBA) deep eutectic solvent as dual functional monomers was successfully synthesized for the specific recognition of laminarin. The MIPs were characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, thermal gravimetric analysis, and vibrating sample magnetometer analysis. The results showed that the MIPs were spheres of a uniform size, with the surface rich in cavities and excellent superparamagnetism properties. The adsorption experiments showed that MIPs conform to pseudo-second-order kinetics and Langmuir isotherm adsorption. The maximum adsorption capacity under optimal conditions was 322.58 μg·mg^-1 and the imprinting factor was 2.13. Under the optimized conditions, the limit of detection (LOD) of the developed material was 6.6 µM. Linearity of the material was obtained within the range 20-800 µM with a coefficient of determination (r²) being better 0.999. Relative standard deviations (RSDs) were less than 3.96%, and satisfactory recoveries were between 94.55 and 97.39%. The actual sample analysis manifested that MIPs could effectively separate laminarin from Laminarin japonica Aiesch.

β-Cyclodextrin-Based Supramolecular Imprinted Fiber Array for Highly Selective Detection of Parabens

A novel high-throughput array analytical platform based on derived β-cyclodextrin supramolecular imprinted polymer (SMIP) fibers was constructed to achieve selective enrichment and removal of parabens. SMIP fiber arrays have abundant imprinting sites and introduce the host−guest inclusion effect of the derived β-cyclodextrin, which is beneficial to significantly improve the adsorption ability of fiber for parabens. Upon combination with HPLC, a specific and sensitive recognition method was developed with a low limit of detection (0.003−0.02 µg/L, S/N = 3) for parabens analysis in environmental water. This method has a good linearity (R > 0.9994) in the linear range of 0.01−200 µg/L. The proposed SMIP fiber array with high-throughput adsorption capacity has great potential in monitoring water pollution, which also provides a reliable reference for the analysis of more categories of pharmaceutical and personal care product pollutants.

Progress and challenges in sensing of mycotoxins using molecularly imprinted polymers

Mycotoxin is toxic secondary metabolite formed by certain filamentous fungi. This toxic compound can enter the food chain through contamination of food (e.g., by colonization of toxigenic fungi on food). In light of the growing concerns on the health hazards posed by mycotoxins, it is desirable to develop reliable analytical tools for their detection in food products in both sensitive and efficient manner. For this purpose, the potential utility of molecularly imprinted polymers (MIPs) has been explored due to their meritful properties (e.g., large number of tailor-made binding sites, sensitive template molecules, high recognition specificity, and structure predictability). This review addresses the recent advances in the application of MIPs toward the sensing of various mycotoxins (e.g., aflatoxins and patulin) along with their fabrication strategies. Then, performance evaluation is made for various types of MIP- and non-MIP-based sensing platforms built for the listed target mycotoxins in terms of quality assurance such as limit of detection (LOD). Further, the present challenges in the MIP-based sensing application of mycotoxins are discussed along with the future outlook in this research field.

Polyoxometalate-based materials in extraction, and electrochemical and optical detection methods: A review

Polyoxometalates (POMs) as metal-oxide anions have exceptional properties like high negative charges, remarkable redox abilities, unique ligand properties and availability of organic grafting. Moreover, the amenability of POMs to modification with different materials makes them suitable as precursors to further obtain new composites. Due to their unique attributes, POMs and their composites have been utilized as adsorbents, electrodes and catalysts in extraction, and electrochemical and optical detection methods, respectively. A survey of the recent progress and developments of POM-based materials in these methods is therefore desirable, and should be of great interest. In this review article, POM-based materials, their properties as well as their identification methods, and analytical applications as adsorbents, electrodes and catalysts, and corresponding mechanisms of action, where relevant, are reviewed. Some current issues of the utilization of these materials and their future prospects in analytical chemistry are discussed.

Evaluation of 2-hydroxyethyl methacrylate as COMONOMER in the preparation of water-compatible molecularly imprinted polymers for triazinic herbicides

In this work, the preparation and evaluation of water‐compatible molecularly imprinted polymers for triazines using 2‐hydroxyethyl methacrylate and methacrylic acid as comonomers is described. Four sets of molecularly imprinted and non‐imprinted polymers for propazine were prepared at varying monomer molar ratios (from 4:0 to 1:3), and evaluated for the recognition of several triazines directly in aqueous media. The evaluation was performed by loading 1 mL of an aqueous solution containing 500 ng of each selected triazine, washing with 500 μL of acetonitrile, and eluting with 500 μL of methanol followed by 2 × 500 μL of a solution of methanol containing 10% of acetic acid. Final determinations were performed by high‐performance liquid chromatography‐ultraviolet detection. Improvement in molecular recognition of triazines in water was obtained on those molecularly imprinted polymers incorporating 2‐hydroxyethyl methacrylate in 3:1 or 2:2 molar ratios, being the former selected as optimum providing recoveries for propazine up to 80%. A molecularly imprinted solid‐phase extraction protocol was developed to ensure that triazines‐selective recognition takes place inside selective binding sites in pure water media. Finally, the developed method was successfully applied to the determination of the selected triazines in environmental waters providing limits of detection from 0.16 and the 0.5 μg/L concentration range.

Recent Progress in Non-Enzymatic Electroanalytical Detection of Pesticides Based on the Use of Functional Nanomaterials as Electrode Modifiers

This review presents recent advances in the non-enzymatic electrochemical detection and quantification of pesticides, focusing on the use of nanomaterial-based electrode modifiers and their corresponding analytical response. The use of bare glassy carbon electrodes, carbon paste electrodes, screen-printed electrodes, and other electrodes in this research area is presented. The sensors were modified with single nanomaterials, a binary composite, or triple and multiple nanocomposites applied to the electrodes’ surfaces using various application techniques. Regardless of the type of electrode used and the class of pesticides analysed, carbon-based nanomaterials, metal, and metal oxide nanoparticles are investigated mainly for electrochemical analysis because they have a high surface-to-volume ratio and, thus, a large effective area, high conductivity, and (electro)-chemical stability. This work demonstrates the progress made in recent years in the non-enzymatic electrochemical analysis of pesticides. The need for simultaneous detection of multiple pesticides with high sensitivity, low limit of detection, high precision, and high accuracy remains a challenge in analytical chemistry.

Solid-phase extraction techniques based on nanomaterials for mycotoxin analysis: An overview for food and agricultural products

Mycotoxin contamination is a globally concerned problem for food and agricultural products since it may directly or indirectly induce severe threats to human health. Sensitive and selective screening is an efficient strategy to prevent or reduce human and animal exposure to mycotoxins. However, enormous challenges exist in the determination of mycotoxins, arising from complex sample matrices, trace-level analytes, and the co-occurrence of diverse mycotoxins. Appropriate sample preparation is essential to isolate, purify, and enrich mycotoxins from complicated matrices, thus decreasing sample matrix effects and lowering detection limits. With the cross-disciplinary development, new solid-phase extraction strategies have been exploited and integrated with nanotechnology to meet the challenges of mycotoxin analysis. This review summarizes the advance and progress of solid-phase extraction techniques as the methodological solutions for mycotoxin analysis. Emphases are paid on nanomaterials fabricated as trapping media of SPE techniques, including carbonaceous nanoparticles, metal/metal oxide-based nanoparticles, and nanoporous materials. Advantages and limitations are discussed, along with the potential prospects. This article is protected by copyright. All rights reserved.

Novel electrochemical sensor modified with molecularly imprinted polymers for determination of enrofloxacin in marine environment

Molecularly imprinted polymers were synthesized by gel-sol method with multi-walled carbon nanotubes as support and enrofloxacin as a template and further modified on the surface of glassy carbon electrode to construct a molecularly imprinted electrochemical sensor. The performance of the imprinted electrochemical sensor was thoroughly investigated by using cyclic voltammetry and differential pulse voltammetry. The influence of imprinted polymers amount, electrolyte pH, and incubation time on the sensor performance was investigated for the detection of enrofloxacin. Under the optimal experimental conditions in a three-electrode system with the modified electrode as the working electrode the differential pulse voltammetry response current of the sensor had a good linear relationship at 0.2 V (vs. saturated calomel reference electrode) with the enrofloxacin concentration within 2.8 pM-28 μM and the limit of detection of the method was 0.9 pM. The competitive interference experiment showed that the imprinted electrochemical sensor could selectively recognize enrofloxacin. The method was applied to analyze spiked natural seawater, fish, and shrimp samples. The recovery was 96.4%-102%, and RSD was less than 4.3% (n = 3), indicating that the proposed imprinted electrochemical sensor was suitable for the determination of trace enrofloxacin in marine environment samples.

Mycotoxins detection: view in the lens of molecularly imprinted polymer and nanoparticles

Molecularly imprinted polymers (MIPs) are tailor-made functional composites which selectively recognize and bind the target molecule of interest. MIP composites are products of the massively cross-linked polymer matrices, generated via polymerization, with bio-inspired recognition cavities that are morphologically similar in size, shape and spatial patterns to the target conformation. These features have enabled researchers to expand the field of molecular recognition, more specifically for target with peculiar requirements. Nevertheless, MIPs alone are characterized with weak sensitivity. Besides, nanoparticles (NPs) are remarkably sensitive but also suffer from poor selectivity. Intriguingly, the combination of the two results in a highly sensitive and selective MIP composite. For instance, the conjugation of different functional NPs with MIPs can generate new flexible target capture tools, either a dynamic sensor or a novel drug delivery system. In this regard, although the technology is considered an established and feasible approach, it is still perceived as a burgeoning technology for various fields, which makes it unceasingly worthy reviewing. Therefore, in this review, we attempt to give an update on various custom-made biosensors based on MIPs in combination with various NPs for the detection of mycotoxins, the toxic secondary metabolites of fungi. We first summarize the classification, prevalence, and toxicological characteristics of common mycotoxins. Next, we provide an overview of MIP composites and their characterization, and then segment the role of NPs with respect to common types of MIP-based sensors. At last, conclusions and outlook are discussed.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Constructing porous intramolecular donor–acceptor integrated carbon nitride doped with m-aminophenol for boosting photocatalytic degradation and hydrogen evolution activity

A porous intramolecular D–A integrated carbon nitride with boosted photocatalytic activity was constructed via thermal melting followed by thermal copolymerization of m-aminophenol with urea.

Recent advances in porous organic frameworks for sample pretreatment of pesticide and veterinary drug residues: a review

Rapid and accurate detection of pesticide and veterinary drug residues is a continuing challenge because of the complex matrix effects. Thus, appropriate sample pretreatment is a crucial step for the effective extraction of the analytes and removal of the interferences. Recently, the development of nanomaterial adsorbents has greatly promoted the innovation of food sample pretreatment approaches. Porous organic frameworks (POFs), including polymers of intrinsic microporosity, covalent organic frameworks, hyper crosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks, have been widely utilized due to their tailorable skeletons and pores as well as fascinating features. This review summarizes the recent advances for POFs to be utilized in adsorption and sample preparation of pesticide and veterinary drug residues. In addition, future prospects and challenges are discussed, hoping to offer a reference for further study on POFs in sample pretreatment.