Advanced nanomaterials towards biosensing of insulin: Analytical approaches

Rational engineering of ligands & metal nodes: MOF-on-MOF based probe for efficient integration of anti-interference and triple signal amplification

Accurate and sensitive detection of slight fluctuations in insulin concentration is essential for the assessment and treatment of early diabetes. The requirement posed a serious challenge to the responsiveness of electrochemical sensors in analyzing slight fluctuation in concentration and their ability to accurately identify the target analyte. Therefore, a MOF-on-MOF (NH2-MIL-88B-on-NH2-UiO-66) probe with integrated anti-interference and signal-amplification capabilities was designed by engineering functionalized ligands and metal nodes, which ensures the sensitivity of sensors while improving the detection accuracy. Signal-amplification: the bimetallic ion nodes of MOF-on-MOF act synergistically at the sensing interface (sodium citrate doped poly-thionine/poly (3, 4-ethylenedioxythiophene) film) to impede the electron transfer, leading to a decrease in the poly-thionine (PThi) oxidation current signal. The complexed Fe3+ triggers a Fenton reaction, further leading to a decrease in the PThi oxidation current signal. A triple amplification of the PThi oxidation current signal response induced by changes in concentration per unit of analyte was achieved. Anti-interference: The growth of a more hydrophilic MOF on the surface of another less hydrophilic MOF and the introduction of a large number of amino groups resulted in a significant anti-interference property of the MOF-on-MOF based immunoprobes. The proposed sensor not only achieves detection limits of insulin at the fg level, but also has a signal response per unit change in insulin concentration being 5-50 times higher than existing electrochemical sensors. The integration of the hydrophilic and triple signal amplification strategy is significant in the monitoring of slight fluctuations of analyte concentrations.

Differential insulin response characteristics of graphene oxide-gold nanoparticle composites under varied synthesis conditions

The structural alterations in the constituent materials of nanocomposites such as graphene nanocomposites typically induce changes in their properties including mechanical, electrical, and optical properties. Therefore, by altering the preparation conditions of nanocomposites and investigating their responsiveness to basic biomolecules (such as proteins), it is possible to explore the application potentials of the composites and guide development of new nanocomposite preparation. In this study, different composites of graphene oxide and gold nanoparticles (AuNPs/GO) were obtained by varying the volumes of reducing agents used in the one-pot hydrothermal method. Insulin was chosen as a basic protein to study the response characteristics of AuNPs/GO under different preparation conditions. Optical responses of these composites to pure insulin and various commercial insulin types were all explored for the first time. The results indicated that AuNPs/GO could optically respond to insulin, including pure insulin and various types of commercial insulin, and changes in the preparation conditions could really influence this response. Moreover, optimal preparation conditions could be determined by an optical method for the largest responses of the nanocomposites to insulin. Based on previous research and the results of this study, it is speculated that the responses of AuNPs/GO to insulin may attribute to glutamic acids, asparagines, and glutamines on insulin, which may interact with AuNPs/GO, particularly with the AuNPs in the composites. Besides, the AuNPs/GO could exhibit relatively stable responses to various commercial insulin types and detect the concentration of specific branded commercial insulin with smaller errors. In summary, this study demonstrated the application potential of AuNPs/GO in areas such as drug testing and production, while also furnishing an experimental foundation and direction for further applications of AuNPs/GO in biosensing and biomolecule detection.

Chitosan/platinum nanocubes/Mn(TPDCA)2-modified glassy carbon electrodes for the electrochemical quantification of amlodipine in unprocessed plasma samples

A novel electrochemical probe is developed to detect amlodipine (AMD) in unprocessed plasma samples. The fabrication process involves the synthesis of platinum nanocubes (Pt NCs) and Mn(TPDCA)2 complexes, which are then immobilized them onto the glassy carbon electrode (GCE) surface. The developed electrochemical probe demonstrates exceptional detection performance, with a wide dynamic range, outstanding selectivity, and commendable reproducibility. The linear range and lower limit of detection of the developed method are 53 nM-3.5 µM and 53 nM, respectively. Electrochemical experiments have been conducted to study the kinetics of electrooxidation on the modified electrode, revealing that the process is diffusion-controlled. Furthermore, method validation studies are performed to assess the accuracy, precision, and selectivity of the sensor, demonstrating excellent performance in all these aspects. Consequently, it can be concluded that the sensor is highly suitable for practical applications in drug analysis.

A versatile ratiometric fluorescence nanoprobe for the determination of clonazepam in patients' plasma samples

Despite the necessity of the study of therapeutic drug monitoring of clonazepam (CLZ), there are only a few fast detection methods available for determining CLZ in biological media. This study aims to develop a cost-effective and ratiometric probe for the quantification of CLZ in plasma samples. Fluorescent polydopamine nanoparticles were produced through a self-polymerization process at a pH of 8.5. Rhodamine B molecules were employed as a fluorescent reference material, emitting stable fluorescence in the visible range. The fabricated probe exhibited a specific detection capability for CLZ. The fluorescence emission of the probe was enhanced in two concentration ranges: from 50 ng/mL to 1.0 μg/mL and from 1.0 to 15.0 μg/mL with a lower limit of quantification of 50 ng/mL, indicating the sensitivity of the probe for detecting CLZ plasma levels. The accuracy of the probe is favorable which could be recommended for CLZ monitoring in the biological media. Furthermore, this probe is highly specific towards CLZ in the presence of various interfering agents which is mainly caused by its ratiometric nature. The developed platform showed high reliability in quantifying CLZ concentrations in patients' plasma samples. Hence, the fabricated probe could be recommended as a reliable method for the routine detection of CLZ in clinical settings.

Integrating of analytical techniques with enzyme-mimicking nanomaterials for the fabrication of microfluidic systems for biomedical analysis

Bioanalysis faces challenges in achieving fast, reliable, and point-of-care (POC) determination methods for timely diagnosis and prognosis of diseases. POC devices often display lower sensitivity compared to laboratory-based methods, limiting their ability to quantify low concentrations of target analytes. To enhance sensitivity, the synthesis of new materials and improvement of the efficiency of the analytical strategies are necessary. Enzyme-mimicking materials have revolutionized the field of the fabrication of new high-throughput sensing devices. The integration of microfluidic chips with analytical techniques offers several benefits, such as easy miniaturization, need for low biological sample volume, etc., while also enhancing the sensitivity of the probe. The use enzyme-like nanomaterials in microfluidic systems can offer portable strategies for real-time and reliable detection of biological agents. Colorimetry and electrochemical methods are commonly utilized in the fabrication of nanozyme-based microfluidic systems. The review summarizes recent developments in enzyme-mimicking materials-integrated microfluidic analytical methods in biomedical analysis and discusses the current challenges, advantages, and potential future directions.

Facile green synthesis of wasted hop-based zinc oxide nanozymes as peroxidase-like catalysts for colorimetric analysis

Hops are a common ingredient in beer production, and a considerable quantity of hops is usually discarded as a waste material once the brewing process is completed. Transforming this waste material into valuable nanomaterials offers a sustainable approach that has the potential to significantly mitigate environmental impact. Herein, a facile and green protocol for the production of zinc oxide nanozymes (ZnO NZs) using wasted hop extract (WHE) as a natural precursor was demonstrated. The process involved a hydrothermal synthesis method followed by a calcination step to form the final ZnO NZs. The results revealed that lupulon, the main β-acid in hops, particularly the phenolic hydroxy group, is primarily responsible for the biosynthesis of ZnO NZs. The WHE-ZnO NZs exhibited exceptional peroxidase-like (POD-like) activity and served as effective catalysts for the oxidation of 3,3,5,5-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2). Analysis of the catalytic mechanism revealed that the POD-like activity of these WHE-ZnO NZs originated from their ability to expedite the transfer of electrons between TMB and H2O2, resulting in the enzymatic kinetics following the standard Michaelis-Menten mechanism. Furthermore, we developed a straightforward and user-friendly colorimetric technique for detecting both H2O2 and glucose. By utilizing the WHE-ZnO NZs as POD-like catalysts, we achieved a linear detection range of 1-1000 μM and a limit of detection of 0.24 μM (S/N = 3) for H2O2 detection and a linear range of 0-100 mM and a detection limit of 16.73 μM (S/N = 3) for glucose detection. These results highlighted the potential applications of our waste-to-resource approach for nanozyme synthesis in the field of analytical chemistry.

A ratiometric electrochemical probe for the quantification of apixaban in unprocessed plasma samples using carbon aerogel/BFO modified glassy carbon electrodes

A novel electrochemical probe was established for the quantification of apixaban (APX) in unprocessed plasma samples. Efficiently oxidized graphene oxide aerogels (EEGO-AGs) and nano-sized Bi2Fe4O9 (BFO) particles were electrodeposited on the surface of a glassy carbon electrode (GCE). In this work, a ratiometric electrochemical method was introduced for APX detection to enhance the specificity of the probe in plasma samples. The fabricated ratiometric probe was employed for the indirect detection determination of APX using K3[Fe(CN)6]/K4[Fe(CN)6] as the redox pair. The differential pulse voltammetry technique was used to record the current alteration of the BFO/EEGO-AG-functionalized GCE probe at various APX concentrations. The probe response was proportional to the APX concentrations from 10 ng mL-1 to 10 μg mL-1 with a low limit of quantification (LLOQ) of 10 ng mL-1. After validation, this method was successfully utilized for the determination of APX in patients' plasma samples who have taken APX regularly. The fabricated chemosensor detected APX concentrations in unprocessed plasma samples with high selectivity, resulting from the physical filtering antifouling activity of aerogels.

Label-free Aptasensor for the Ultrasensitive Detection of Insulin Via a Synergistic Fluorescent Turn-on Strategy Based on G-quadruplex and AIEgens

Insulin, the only hormone regulating blood glucose level, is strongly associated with diabetes and its complications. Specific recognition and ultrasensitive detection of insulin are of clinical significance for the early diagnosis and treatment of diabetes. Inspired by aggregation-induced emission, we presented a turn-on label-free fluorescence aptasensor for insulin detection. Quaternized tetraphenylethene salt was synthesized as the fluorescence probe. Guanine-rich aptamer IGA3 was selected as recognition element. Graphene oxide was chosen as the quencher. Under optimized conditions, the fluorescence aptasensor displayed a wide linear range (1.0 pM-1.0 μM) with a low limit of detection (0.42 pM). Furthermore, the aptasensor was successfully applied to detect insulin in human serum. Spiked recoveries were obtained in the range of 96.06%-104.26%. All these results demonstrated that the proposed approach has potential application in the clinical diagnostics of diabetes.

Functional Nucleic Acid Nanomaterials: Development, Properties, and Applications

Functional nucleic acid (FNA) nanotechnology is an interdisciplinary field between nucleic acid biochemistry and nanotechnology that focuses on the study of interactions between FNAs and nanomaterials and explores the particular advantages and applications of FNA nanomaterials. With the goal of building the next-generation biomaterials that combine the advantages of FNAs and nanomaterials, the interactions between FNAs and nanomaterials as well as FNA self-assembly technologies have established themselves as hot research areas, where the target recognition, response, and self-assembly ability, combined with the plasmon properties, stability, stimuli-response, and delivery potential of various nanomaterials can give rise to a variety of novel fascinating applications. As research on the structural and functional group features of FNAs and nanomaterials rapidly develops, many laboratories have reported numerous methods to construct FNA nanomaterials. In this Review, we first introduce some widely used FNAs and nanomaterials along with their classification, structure, and application features. Then we discuss the most successful methods employing FNAs and nanomaterials as elements for creating advanced FNA nanomaterials. Finally, we review the extensive applications of FNA nanomaterials in bioimaging, biosensing, biomedicine, and other important fields, with their own advantages and drawbacks, and provide our perspective about the issues and developing trends in FNA nanotechnology.

Metal–organic frameworks: a future toolbox for biomedicine?

The present review focuses on the use of Metal–Organic Frameworks, (MOFs) highlighting the most recent developments in the biological field and as bio-sensors.

Aptamer-gold nanoparticle doped covalent organic framework followed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for selective enrichment and detection of human insulin

In this work, we introduced an aptamer modified Au nanoparticles doped covalent organic frameworks composite (IBAs-AuNPs/COF) to improve the property of selective enrichment of insulin from serum samples. The Au nanoparticles were immobilized on imine-based COF by in-situ reduction reaction via mussel inspired polydopamine coating, and then sulfhydryl-containing aptamers were bonded to the surface of AuNPs through an Au-S linkage. Due to the excellent adsorption property of COF and specific recognition between insulin and IBAs, the IBAs-AuNPs/COF composites show selective and satisfactory extraction property to insulin in serum samples. Excellent specifity was obtained for insulin in the presence of 50-fold interfering substances including human immunoglobulin, lysozyme and biotin. The concentrations of insulin in the range of 1.0 to 50.0 μg L^-1 show good linear relationship (R² = 0.9917) with limit of detection and limit of quantitation of 0.28 μg L^-1 and 0.93 μg L^-1, respectively. Then, the IBAs-AuNPs/COF composites were applied to enrich insulin in serum samples followed by analysis with matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF-MS). After the recovery experiment, the developed method shows good recoveries in range of 91.6%-112.4% with low RSD value (2.4%-9.4%, n = 3) for diabetic and healthy serum samples. The developed IBAs-AuNPs/COF composites propose a new perspective for selective and efficient enrichment of biomarkers in serum samples by functionalized COF.