Chiral liquid chromatography and capillary electrochromatography: Trends from 2017 to 2018

Chiral metal-organic frameworks grown in situ for monolithic capillary electrochromatographic enantioseparation

Chiral metal-organic frameworks (CMOFs) with chiral selectivity are one of the high-quality stationary phases for capillary electrochromatography (CEC). However, there is a problem of unsatisfactory enantioseparation performance of capillary columns due to insufficient loading. In this work, a lamellar CMOF (Cu-TC) was grown in situ on the surface of the monolith in a capillary monolithic column to obtain a Cu-TC@monolithic column. The CEC system constructed based on the Cu-TC@monolithic column shows a satisfactory chiral separation performance. Compared with the Cu-TC-based coated column (Cu-TC@coated column), the enantioseparation performance of the CEC system based on the Cu-TC@monolithic column was greatly improved, and the resolutions (Rs) of the model analytes were increased by 80-500%. In addition, the effects of experimental conditions such as the number of cycles of Cu-TC in situ growth, buffer concentration, buffer pH, organic solvent addition and applied voltage on the performance of CEC were also investigated. Finally, the chiral selection mechanism of the stationary phase was explored by selective adsorption experiments. The present work provides a new idea for the development of capillary stationary phases, which has great potential considering the diversity of CMOFs.

Valbenazine isomers and enantiomer determination by chiral normal phase liquid chromatography

A novel, simple, specific, rapid, enantioselective normal phase chiral high-performance liquid chromatographic method with amylose-based Chiral Pak IG-3(250 × 4.6 mM) 3.0 μM column was developed and validated for separation and quantification of isomers and enantiomer of Valbenazine. The mobile phase composed of n-Heptane, isopropyl alcohol, dichloromethane, ethanol, and diethylamine in the ratio of 70:10:15:5:0.1 (V/V/V/VV) with a gradient flow rate was applied. The injection volume was 10 μl, and detection was carried out using a photodiode array detector at 282 nM. The column compartment was set at 35°C. The resolution between the enantiomer and isomers was found to be more than 2.0. The method was linear over the concentration range of limit of quantitation to 250% for isomers and enantiomers. The method was found to be robust with column temperature. The proposed chiral method is applicable for the determination of isomers and enantiomer of Valibenazine and was successfully used in the quality control of bulk drug manufacturing and pharmaceuticals.

Enhancement of chiral drugs separation by a novel adjustable gravity mediated capillary electrophoresis combined with sulfonic propyl ether β-CD polymer

A water-soluble negative sulfonic propyl ether β-CD polymer (SPE-β-CDP) to be used as chiral selector in capillary electrophoresis (CE) was polymerized. The sulfonic substitution degree of each β-CD in SPE-β-CDP was statistically homogenized. The only one negative peak in electrophoretogram with indirect ultraviolate method proved its uniformity of electrophoretic behavior. There were 7.12 sulfonic substitution in β-CD unit and 164 μmole β-CD units in each gram of SPE-β-CDP, which corresponded a molecular weight of 7000 or more. Compared with monomer, SPE-β-CDP was lower effect on electrical current of CE, indicating a high concentration of SPE-β-CDP could be added. Its separation ability was verified by 12 chiral drugs. SPE-β-CDP also showed advantages of good water solubility, easy preparation and recovery to reduce the overall cost. However, five of 12 chiral drugs were hardly to be fully separated which was normal for any kind of chiral selector. A newly adjustable gravity mediated capillary electrophoresis (AGM-CE) technology was proposed and combined with SPE-β-CDP to enhance the chiral separation efficiencies of propranolol, salbutamol, omeprazole, ofloxacin and phenoxybenzamine which were markedly improved to 3.02, 1.17, 7.63, 4.14, and 2.81, respectively. Furthermore, its gradient mode (AGMg-CE) was also used to improve resolution through utilizing the zero mobility point, at which the effective apparent mobility of one racemate was zero. Resolutions of five chiral drugs were significantly improved, especially resolution of carvedilol changed from 0.43 to 1.0. These indicated SPE-β-CDP as chiral selector, AGM-CE and AGMg-CE as new CE technologies had a great potential in chiral separation.

Recent development of chiral ionic liquids for enantioseparation in liquid chromatography and capillary electrophoresis: A review

Ionic liquids (ILs), which are salts in a molten state below 100 °C, have become a hot topic of research in various fields because of their negligible vapour pressure, high thermal stability, and tunable viscosity. Chiral ionic liquids (CILs) can be applied in chromatography and capillary electrophoresis fields to improve the performance of enantiomeric separation, such as chiral stationary phases (CSPs) and mobile phase additives in high-performance liquid chromatography (HPLC); CSPs in gas chromatography (GC); and background electrolyte additives (BGE), chiral ligands and chiral selectors (CSs) in capillary electrophoresis (CE). This review focuses on the applications of CILs in HPLC and CE for the separation of enantiomers in the past five years. The mechanism for separating enantiomers was explained, and the prospect of the application of CILs in chiral liquid chromatography (LC) and CE analysis was also discussed.

A novel pillar[3]trianglimine macrocycle with a deep cavity used as a chiral selector to prepare a chiral stationary phase by thiol-ene click reaction for enantioseparation in high-performance liquid chromatography

A chiral pillar[3]trianglimine (C60 H72 N6 O6 ) with a deep cavity has been developed as a chiral selector and bonded to thiolated silica by thiol-ene click reaction to fabricate a novel chiral stationary phase for enantioseparation in high-performance liquid chromatography. The enantioseparation performance of the fabricated chiral stationary phase has been evaluated by separating various racemic compounds, including alcohols, esters, amines, ketones, amino acids, and epoxides, in both normal-phase and reversed-phase elution modes. In total, 14 and 17 racemates have been effectively separated in these two separation modes, respectively. In comparison with two widely used chiral columns (Chiralcel OD-H and Chiralpak AD-H), our novel chiral stationary phase offered good chiral separation complementarity, separating some of the tested racemates that could not be separated or were only partially separated on these two commercial columns. The influences of analyte mass, mobile phase composition, and column temperature on chiral separation have been investigated. Good repeatability, stability, and column-to-column reproducibility of the chiral stationary phase for enantioseparation have been observed. After the fabricated column had been eluted up to 400 times, the relative standard deviations (n = 5) of resolution (Rs) and retention time of the separated analytes were < 0.39% and < 0.20%, respectively. The relative standard deviations (n = 3) of Rs and retention time for column-to-column reproducibility were < 4.6% and < 5.2%, respectively. This study demonstrated that the new chiral stationary phase has great prospects for chiral separation in high-performance liquid chromatography.

Enantioseparation Membranes: Research Status, Challenges, and Trends

The purity of enantiomers plays a critical role in human health and safety. Enantioseparation is an effective way and necessary process to obtain pure chiral compounds. Enantiomer membrane separation is a new chiral resolution technique, which has the potential for industrialization. This paper mainly summarizes the research status of enantioseparation membranes including membrane materials, preparation methods, factors affecting membrane properties, and separation mechanisms. In addition, the key problems and challenges to be solved in the research of enantioseparation membranes are analyzed. Last but not least, the future development trend of the chiral membrane is expected.

Analytical enantioseparation of N-alkyl drugs by reversed-phase liquid chromatography with carboxymethyl-β-cyclodextrin as mobile phase additive

Carboxymethyl-β-cyclodextrins (CM-β-CDs) with five kinds of degrees of substitution were synthesized and characterized. Analytical enantioseparation of six basic drugs containing N-alkyl groups, including pheniramine, chlorpheniramine, labetalol, propranolol, venlafaxine, and trans-paroxol, was achieved by reversed-phase high-performance liquid chromatography (RP-HPLC) using the synthesized CM-β-CD as chiral mobile phase additives. Key influence factors were optimized, including organic modifier, pH value, CM-β-CD with different degrees of substitution, and concentration of CM-β-CD. The mobile phase was composed of methanol and 10 mmol L^-1 of phosphate buffer pH 4.0 containing 10 mmol L^-1 of CM-β-CD. Peak resolution for six racemic drugs was gradually increased with an increasing degree of substitution of the synthesized CM-β-CD. The stoichiometric ratio and binding constants for the inclusion complex formed by CM-β-CD and enantiomer were determined, which showed that the stoichiometric ratio for each inclusion complex was 1:1.

Comparison of the Performance of Different Bile Salts in Enantioselective Separation of Palonosetron Stereoisomers by Micellar Electrokinetic Chromatography

Bile salts are a category of natural chiral surfactants which have ever been used as the surfactant and chiral selector for the separation of many chiral compounds by micellar electrokinetic chromatography (MEKC). In our previous works, the application of sodium cholate (SC) in the separation of four stereoisomers of palonosetron (PALO) by MEKC has been studied systematically. In this work, the parameters of other bile salts, including sodium taurocholate (STC), sodium deoxycholate (SDC), and sodium taurodeoxycholate (STDC) in the separation of PALO stereoisomers by MEKC were measured and compared with SC. It was found that all of four bile salts provide chiral recognition for both pairs of enantiomers, as well as achiral selectivity for diastereomers of different degrees. The structure of steroidal ring of bile salts has a greater impact on the separation than the structure of the side chain. The varying separation results by different bile salts were elucidated based on the measured parameters. A model to describe the contributions of the mobility difference of solutes in the aqueous phase and the selectivity of micelles to the chiral and achiral separation of stereoisomers was introduced. Additionally, a new approach to measure the mobility of micelles without enough solubility for hydrophobic markers was proposed, which is necessary for the calculation of separation parameters in MEKC. Under the guidance of derived equations, the separation by SDC and STDC was significantly improved by using lower surfactant concentrations. The complete separation of four stereoisomers was achieved in less than 3.5 min by using 4.0 mM of SDC. In addition, 30.0 mM of STC also provided the complete resolution of four stereoisomers due to the balance of different separation mechanisms. Its applicability for the analysis of a small amount of enantiomeric impurities in the presence of a high concentration of the effective ingredient was validated by a real sample.

Bubble-pen lithography: Fundamentals and applications: Nanoscience: Special Issue Dedicated to Professor Paul S. Weiss

Developing on-chip functional devices requires reliable fabrication methods with high resolution for miniaturization, desired components for enhanced performance, and high throughput for fast prototyping and mass production. Recently, laser-based bubble-pen lithography (BPL) has been developed to enable sub-micron linewidths, in situ synthesis of custom materials, and on-demand patterning for various functional components and devices. BPL exploits Marangoni convection induced by a laser-controlled microbubble to attract, accumulate, and immobilize particles, ions, and molecules onto different substrates. Recent years have witnessed tremendous progress in theory, engineering, and application of BPL, which motivated us to write this review. First, an overview of experimental demonstrations and theoretical understandings of BPL is presented. Next, we discuss the advantages of BPL and its diverse applications in quantum dot displays, biological and chemical sensing, clinical diagnosis, nanoalloy synthesis, and microrobotics. We conclude this review with our perspective on the challenges and future directions of BPL.

One-pot synthesis of a novel chiral Zr-based metal-organic framework for capillary electrochromatographic enantioseparation

A novel chiral stationary phase (CSP) of Zr-based metal-organic framework, l-Cys-PCN-224, was prepared by one-pot method and applied for the enantioseparation by capillary electrochromatography. The CSP was characterized by X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier-transform infrared spectra, nitrogen adsorption/desorption, circular dichroism spectrum, zeta-potential, and so on. The results revealed that the CSP had good crystallinity, high specific surface area (2580 m² /g), and good thermal stability. Meanwhile, the cross-section of l-Cys-PCN-224-bonded open-tubular (OT) column was observed by a scanning electron microscope, which proved the successful bonding of l-Cys-PCN-224 particles to the inner wall. Relative standard deviations of the column efficiencies were 3.87%-9.14%, and not obviously changed after 200 runs, which indicated that l-Cys-PCN-224-bonded OT column had the better stability and reproducibility. Excellent chiral separation performance was verified with nine kinds of natural amino acids including acidic, neutral, and basic as the analytes. All amino acids studied achieved good separation with the resolution of 1.38-13.9 and selector factor of 1.11-3.71. These results demonstrated that the CSP had an excellent potential in the chiral separation field.

Chiral Metal-Organic Frameworks

In the past two decades, metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) assembled from metal ions or clusters and organic linkers via metal-ligand coordination bonds have captivated significant scientific interest on account of their high crystallinity, exceptional porosity, and tunable pore size, high modularity, and diverse functionality. The opportunity to achieve functional porous materials by design with promising properties, unattainable for solid-state materials in general, distinguishes MOFs from other classes of materials, in particular, traditional porous materials such as activated carbon, silica, and zeolites, thereby leading to complementary properties. Scientists have conducted intense research in the production of chiral MOF (CMOF) materials for specific applications including but not limited to chiral recognition, separation, and catalysis since the discovery of the first functional CMOF (i.e., d- or l-POST-1). At present, CMOFs have become interdisciplinary between chirality chemistry, coordination chemistry, and material chemistry, which involve in many subjects including chemistry, physics, optics, medicine, pharmacology, biology, crystal engineering, environmental science, etc. In this review, we will systematically summarize the recent progress of CMOFs regarding design strategies, synthetic approaches, and cutting-edge applications. In particular, we will highlight the successful implementation of CMOFs in asymmetric catalysis, enantioselective separation, enantioselective recognition, and sensing. We envision that this review will provide readers a good understanding of CMOF chemistry and, more importantly, facilitate research endeavors for the rational design of multifunctional CMOFs and their industrial implementation.

Enantioseparation of Five Racemic N-alkyl Drugs by Reverse Phase HPLC Using Sulfobutylether-β-cyclodextrin as Chiral Mobile Phase Additive

Analytical enantioseparations of five N-alkyl drugs, fluoxetine hydrochloride, labetalol, venlafaxine hydrochloride, trans-paroxol and atropine sulfate, were investigated by RP-HPLC with sulfobutylether-β-cyclodextrin as chiral mobile phase additive. Effects of various factors such as composition of mobile phase, concentration of cyclodextrins and column temperature on retention and enantioselectivity were studied. Apparent formation constant between methanol, acetonitrile and sulfobutylether-β-cyclodextrin were determined to be 2.90 × 10^-3 and 1.00 × 10^-4 L mmol^-1 under 25 °C using UV-spectrophotometry. Van't Hoff plots were used to investigate thermodynamic parameters for enantiomers-stationary phase interaction and formation of inclusion complex. Two retention models were employed individually for evaluation of inclusion complexation between five racemates and sulfobutylether-β-cyclodextrin. The second model with complex adsorption was more accord with the retention behavior of fluoxetine hydrochloride, labetalol and venlafaxine hydrochloride enantiomers, while the first model was more consistent with the retention behaviors of trans-paroxol and atropine sulfate. In the selected mobile phase, stoichiometric ratio for both of inclusion complex was found to be 1:1. This article is protected by copyright. All rights reserved.

l-Cysteine modified metal-organic framework as a chiral stationary phase for enantioseparation by capillary electrochromatography

A new kind of chiral zirconium based metal-organic framework, l-Cys-PCN-222, was synthesized using l-cysteine (l-Cys) as a chiral modifier by a solvent-assisted ligand incorporation approach and utilized as the chiral stationary phase in the capillary electrochromatography system. l-Cys-PCN-222 was characterized by X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier-transform infrared spectra, nitrogen adsorption/desorption, circular dichroism spectrum, zeta-potential and so on. The results revealed that l-Cys-PCN-222 had the advantages of good crystallinity, high specific surface area (1818 m2 g-1), thermal stability and chiral recognition performance. Meanwhile, the l-Cys-PCN-222-bonded open-tubular column was prepared using l-Cys-PCN-222 particles as the solid phase by 'thiol-ene' click chemistry reaction and characterized by scanning electron microscopy, which proved the successful bonding of l-Cys-PCN-222 to the column inner wall. Finally, the stability, reproducibility and chiral separation performance of the l-Cys-PCN-222-bonded OT column were measured. Relative standard deviations (RSD) of the column efficiencies for run-to-run, day-to-day, column-to-column and runs were 1.39-6.62%, and did not obviously change after 200 runs. The enantiomeric separation of 17 kinds of chiral compounds including acidic, neutral and basic amino acids, imidazolinone and aryloxyphenoxypropionic pesticides, and fluoroquinolones were achieved in the l-Cys-PCN-222-bonded OT column. These results demonstrated that the chiral separation system of the chiral metal-organic frameworks (CMOFs) coupled with capillary electrochromatography has good application prospects.

Chiral stationary phases based on lactide derivatives for high-performance liquid chromatography

Lactide is a natural and renewable lactone cyclic ester-containing intrinsic chiral center, providing an affordable natural compound that is potential for the development of chiral polymers. In this work, we reported two novel chiral stationary phases (CSPs) based on lactide derivatives, methylene lactide (MLA), for high-performance liquid chromatography (HPLC). By using free radical polymerization, chemically bonded CSPs of poly(methylene lactide) (PMLA) and side-chain modified PMLA by aminolysis (N-PMLA) can be prepared. Also, poly(l-lactic acid) (PLLA) was prepared as a control. The chiral resolution performance of the chromatographic columns was examined in both reversed-phase and normal-phase modes. PMLA and N-PMLA CSPs exhibited fairly good chiral recognition ability, whereas the separation ability of PLLA is much weaker. This work provides a new platform for the development of high-performance CSPs from affordable natural products.

Open tubular capillary column immobilized with sulfobutylether-β-cyclodextrin for chiral separation in capillary electrochromatography

A novel chiral open tubular capillary column was fabricated with sulfobutylether-β-cyclodextrin and glycidyl methacrylate for enantioseparation in capillary electrochromatography. First, the pretreated silica-fused capillary was treated with 3-trimethoxysilyl propyl methacrylate to attach double bond ligand onto the surface. A copolymer layer was formed on the surface of capillary using glycidyl methacrylate and ethylene dimethacrylate by in situ one-pot polymerization. Sulfobutylether-β-cyclodextrin was encapsulated inside the copolymerized layer. The morphology of the developed column was characterized by field emission scanning electron microscopy. The effect of organic percentage and pH value of the mobile phase on electroosmotic flow and resolution was also investigated. The performance of the fabricated column was validated by separation of amlodipine besilate, 2,3-diphenylpropionic acid, tropic acid, and pantoprazole enantiomers with good resolutions of 3.67, 4.82, 3.34, and 2.61, respectively. The repeatabilities of column-to-column and day-to-day through relative standard deviation were found better than 4%, exhibiting satisfactory repeatability of the developed column. The results reveal that open tubular capillary columns modified with β-cyclodextrin show a great prospect for enantioseparation of chiral drugs in capillary electrochromatography.

Achiral Molecular Recognition of Substituted Aniline Position Isomers by Crown Ether Type Chiral Stationary Phase

To understand the selectivity of the crown ether type chiral stationary phase (CSP), the retention selectivity for aniline and the positional isomers of substituted anilines were studied. In various substituted isomers, except nitroaniline, a remarkable decrease of retention due to steric hindrance was observed for the 2-substituted isomer. To determine the detailed molecular recognition mechanism, quantum chemical calculations were performed for the aggregates between the crown ether and the anilines. The results suggested that the 20-Crown-6, which includes a phenyl-substituted 1,1'-binaphthyl moiety, interacts with alkyl and aryl amines in an unconventional form different from the proposed one for 18-Crown-6.

Advances of capillary electrophoresis enantioseparations in pharmaceutical analysis (2017-2020)

Capillary electrophoresis is a powerful technique for the analysis of polar chiral compounds and has been widely accepted for analytical enantioseparations of drug compounds in pharmaceuticals and biological media. In addition, many mechanistic studies have been conducted in an attempt to rationalize enantioseparations in combination with spectroscopic and computational techniques. The present review will focus on recent examples of mechanistic aspects and summarize recent applications of stereoselective pharmaceutical and biomedical analysis published between January 2017 and November 2020. Various separation modes including electrokinetic chromatography in combination with several detection modes including laser-induced fluorescence, mass spectrometry and contactless conductivity detection will be discussed. A general trend also observed in other analytical techniques is the application of quality by design principles in method development and optimization.

Chiral chromatography method screening strategies: Past, present and future

Method screening is an integral part of chromatographic method development for the separation of racemates. Due to the highly complex retention mechanism of a chiral stationary-phase, it is often difficult, if not impossible, to device predefined method-development steps that can be successfully applied to a wide group of molecules. The standard approach is to evaluate or screen a series of stationary and mobile-phase combinations to increase the chances of detecting a suitable separation condition. Such a process is often the rate-limiting step for high-throughput analyses and purification workflows. To address the problem, several solutions and strategies have been proposed over the years for reduction of net method-screening time. Some of the strategies have been adopted in practice while others remained confined in the literature. The main objective of this review is to revisit, critically discuss and compile the solutions published over the last two decades. We expect that making the diverse set of solutions available in a single document will help assessing the adequacy of existing screening protocols in laboratories conducting chiral separation.

Rapid chiral analysis based on liquid-phase cyclic chemiluminescence

Rapid chiral analysis has become one of the important aspects of academic and industrial research. Here we describe a new strategy based on liquid-phase cyclic chemiluminescence (CCL) for rapid resolution of enantiomers and determination of enantiomeric excess (ee). A single CCL measurement can acquire multistage signals that provide a unique way to examine the intermolecular interactions between chiral hosts and chiral guests, because the lifetime (τ) of the multistage signals is a concentration-independent and distinguishable constant for a given chiral host-guest system. According to the τ values, CCL allows discrimination between a wide range of enantiomeric pairs including chiral alcohols, amines and acids by using only one chiral host. Even the chiral systems hardly distinguished by nuclear magnetic resonance and fluorescence methods can be distinguished easily by CCL. Additionally, the τ value of a mixture of two enantiomers is equal to the weighted average of each enantiomer, which can be used for the direct determination of ee without the need to separate the chiral mixture and create calibration curves. This is extremely crucial for the cases without readily available enantiomerically pure samples. This strategy was successfully applied to monitoring of the Walden inversion reaction and analysis of chiral drugs. The results were in good agreement with those obtained by high-performance liquid chromatography, indicating the utility of CCL for routine quick ee analysis. Mechanism study revealed that the τ value is possibly related to the activity of the chiral substance to catalyze a luminol-H2O2 reaction. Our research provides an unprecedented and general protocol for chirality differentiation and ee determination, which is anticipated to be a useful technology that will find wide application in chirality-related fields, particularly in asymmetric synthesis and the pharmaceutical industry.

Rapid preparation and evaluation of chiral open-tubular columns supported with bovine serum album and zeolite imidazolate framework-8 for mini-capillary electrochromatography

In this work, a class of novel and eco-friendly open-tubular (OT) chiral column was presented for the first time by one step preparation with zeolite imidazolate framework-8 (ZIF-8) and bovine serum album (BSA) based on electrostatic adsorption and adsorption affinity. This stationary phase materials combined the features of large surface areas and adsorption affinity of ZIF-8, and also the multiple chiral binding sites of BSA, which contributes to the π-interaction and hydrophobic interaction with the analytes. The separation performance of BSA@ZIF-8-OT chiral columns was evaluated with a miniaturized capillary electrochromatography and amperometric detection (mini-CEC-AD) system; in particular, nine groups of model molecules, including homologues, structural isomers, and chiral compounds, were baseline separated under the certain optimum conditions. The RSDs of run-to-run, day-to-day, column-to-column, and batch-to-batch reproducibility were less than 13.8 %. Furthermore, the prepared OT columns were successfully applied to fast analysis of ephedrine isomers in Chinese herb ephedra, and the LODs achieved 1.5-2.0 ng mL^-1 (S/N=3) by an electrophoretic stacking technique of moving chemical reaction boundary. This mini-CEC-AD system with BSA@ZIF-8-OT chiral columns provides a promising potential in pharmaceutical analysis due to its fast, sensitive, enantioselective, and low-cost characteristics.

Use of Gamithromycin as a Chiral Selector in Capillary Electrophoresis

In this short communication, we report the use of a second-generation macrolide antibiotic, gamithromycin (Gam), as a novel chiral selector for enantioseparation in capillary electrophoresis (CE). A preliminary analysis of the experiment results shows that Gam is especially suitable for the separation of chiral primary amines. Factors influencing enantioseparations were systematically investigated including the composition of the background electrolyte (BGE), concentration of Gam, the type and proportion of organic solvents, applied voltage, etc. In particular, N-Methylformamide (NMF) was successfully used as a non-aqueous solvent for Gam, and shown to be extremely effective for the separation of primaquine (PMQ) and 1-aminoindan (AMI) when used alone or mixed with other commonly used non-aqueous solvents (e.g. methanol). To our knowledge this was also the first application of NMF as a non-aqueous solvent for antibiotic chiral selectors in CE. The best separations were obtained with 100 mM Tris, 125 mM H₃BO₃ and 80 mM Gam in methanol/NMF (25:75) solvent for PMQ and AMI, or 80-100 mM Gam in methanol for the other model analytes. Among the analytes, the resolution (Rs) of amlodipine (AML) reached up to 15.65, which is to our knowledge the highest value ever reported in CE studies for this compound (except for using molecularly imprinted polymers technique).