AIE luminogens as fluorescent bioprobes

An ESIPT + AIE based dual-response fluorescent probe for continuous detection of PhSH and HClO and visualization of PhSH-induced oxidative stress in living cells

As a valuable industrial chemical, thiophenol (PhSH) is poisonous, which can be easily absorbed by the human body, leading to many serious health issues. In addition, PhSH-triggered oxidative stress is considered to be related with the pathogenesis and toxicity of PhSH. Therefore, efficient methods for monitoring PhSH and ROS production induced by PhSH in living systems are very meaningful and desired. Herein, we reasonably developed a facile dual-response fluorescent probe (HDB-DNP) by incorporating the dinitrophenyl (DNP) group into a novel methylthio-substituted salicylaldehyde azine (HDB) with AIE and ESIPT features. The probe itself was non-fluorescent owing to the strong quenching effect of DNP group. In the presence of PhSH, HDB-DNP gave an intense red fluorescence (610 nm), which can rapidly switch to green fluorescence (510 nm) upon further addition of HClO, allowing the successive detection of PhSH and HClO in two well-separated channels. HDB-DNP proved to be a very promising dual-functional probe for rapid (PhSH: < 17 min; HClO: 10 s) and selective detection of PhSH and HClO in physiological conditions with low detection limit (PhSH: 13.8 nM; HClO: 88.6 nM). Inspired by its excellent recognition properties and low cytotoxicity, HDB-DNP was successfully applied for monitoring PhSH and PhSH-induced HClO generation in living cells with satisfactory results, which may help to better understand the pathogenesis of PhSH-related diseases.

CuPc-Fe@BSA nanocomposite: Intracellular acid-sensitive aggregation for enhanced sonodynamic and chemo-therapy

Due to their rigid π-conjugated macrocyclic structure, organic sonosensitizers face significant aggregation in physiological conditions, hindering the production of reactive oxygen species (ROS). An acid-sensitive nanoassembly was developed to address this issue and enhance sonodynamic therapy (SDT) and emission. Initially, copper phthalocyanine (CuPc) was activated using a H2SO4-assisted hydrothermal method to introduce multiple functional groups (-COOH, -OH, and -SO3H), disrupting strong π-π stacking and promoting ROS generation and emission. Subsequently, negatively charged CuPc-SO4 was incorporated into bovine serum albumin (BSA) to form CuPc-Fe@BSA nanoparticles (10 nm) with Fe3+ ions serving as linkers. In acidic conditions, protonation of CuPc-SO4 and BSA weakened the interactions, leading to Fe3+ release and nanostructure dissociation. Protonated CuPc-SO4 tended to self-aggregate into nanorods. This acidity-sensitive aggregation is vital for achieving specific accumulation within the tumor microenvironment (TME), thereby enhancing retention and SDT efficacy. Prior to this, the nanocomposites demonstrated cycling stability under neutral conditions. Additionally, the released Fe ions exhibited mimicry of glutathione peroxidase and peroxidase activity for chemotherapy (CDT). The synergistic effect of SDT and CDT increased intracellular oxidative stress, causing mitochondrial injury and ferroptosis. Furthermore, the combined therapy induced immunogenic cell death (ICD), effectively activating anticancer immune responses and suppressing metastasis and recurrence.

A novel AIE fluorescent probe for the detection and imaging of hydrogen peroxide in living tumor cells and in vivo

Hydrogen peroxide (H2O2), a key reactive oxygen species (ROS), plays crucial roles in redox signaling pathways and immune responses associated with cell proliferation, differentiation, migration, and disease progression. The selective monitoring of overproduced H2O2 is important for understanding the diagnosis and pathogenesis of diseases such as cardiovascular disease, cancers, diabetes, Parkinson's disease, Alzheimer's disease, and inflammation. In this paper, an AIE fluorescent probe BQM-H2O2 was developed by connecting phenyl borate with the fluorophore BQM-PNH for selective detection of H2O2. In the presence of H2O2 at fw = 99% (pH = 7.4, 1% DMSO), the probe BQM-H2O2 could generate strong fluorescent signals due to the oxidation of the borate ester. The probe exhibited high selectivity and a low detection limit toward H2O2 with the calculated LOD of 112.6 nM. Importantly, it was employed in the detection of exogenous and endogenous hydrogen peroxide in 4T1 cells with low cytotoxicity. This probe has also been successfully applied to imaging of H2O2 in Blab/c mice bearing 4T1 graft tumors.

Recent advances of aggregation-induced emission luminogens for point-of-care biosensing systems

The rapid and sensitive detection of chemical compounds in body fluids and tissues is important for diagnosis of diseases and assessment of the effectiveness of treatment programs. Point-of-care (POC) sensors based on fluorescence signals have been widely used in the rapid detection of various infectious diseases. However, the aggregation-caused quenching phenomenon of conventional fluorescent probes limits the sensitivity and accuracy of fluorescent POC sensors. In this review, we first focus on aggregation-induced emission (AIE)-based POC detection for early diagnosis of diseases and then describe how to use mechanisms of AIE to improve the sensitivity of POC testing. This review gives a summary of the design mechanisms of AIE probes in AIE-based biosensors. Subsequently, it summarizes the design strategies of AIE-based POC sensors in the detection of ions, small molecules, nucleic acids, proteins, and whole entity (cells, bacteria, viruses, and exosomes), placing an emphasis on signal amplification. Finally, it gives an overview of AIE-based POC biosensors, including probes, instruments, and applications. We hope that this review will provide valuable guidance for further expanding the application of AIE luminogens in POC biosensors.

Regulating donor configuration to develop AIE-active type I photosensitizers for lipid droplet imaging and high-performance photodynamic therapy under hypoxia

Type I photodynamic therapy is considered to be a more promising cancer treatment than type II photodynamic therapy due to its non-oxygen-dependent characteristics. In this work, three D-A structure N,N'-dihydrophenazine (DHP)-based photosensitizers DP-CNPY, SMP-CNPY and DMP-CNPY were designed and synthesized by introducing different numbers of methyl groups in the backbone neighbor of DHP as the donor and combined with the typical strong electron acceptor 2-(pyridin-4-yl)acetonitrile. Among the three photosensitizers, SMP-CNPY with one methyl modification showed the best type I ROS (O2-˙, ˙OH) generation capacity and AIE performance. By encapsulation, SMP-CNPY was fabricated into nanoparticles, and SMP-CNPY NPs exhibited lipid droplet targeting ability with near-infrared (NIR) emission. Cell experiments have proved that SMP-CNPY NPs can effectively kill different kinds of cancer cells under normal oxygen conditions. Even under hypoxic and extreme hypoxic conditions, SMP-CNPY NPs can still produce ROS and kill cancer cells. This work holds significant potential in the field of type I AIE-active photosensitizers and provides a new strategy for overcoming the hypoxic dilemma in the malignant tumor microenvironment.

Biomass-derived carbon dots as emerging visual platforms for fluorescent sensing

Biomass-derived carbon dots (CDs) are non-toxic and fluorescently stable, making them suitable for extensive application in fluorescence sensing. The use of cheap and renewable materials not only improves the utilization rate of waste resources, but it is also drawing increasing attention to and interest in the production of biomass-derived CDs. Visual fluorescence detection based on CDs is the focus of current research. This method offers high sensitivity and accuracy and can be used for rapid and accurate determination under complex conditions. This paper describes the biomass precursors of CDs, including plants, animal remains and microorganisms. The factors affecting the use of CDs as fluorescent probes are also discussed, and a brief overview of enhancements made to the preparation process of CDs is provided. In addition, the application prospects and challenges related to biomass-derived CDs are demonstrated.

Nanosensor based approaches for quantitative detection of heparin

Heparin, being a widely employed anticoagulant in numerus clinical complications, requires strict quantification and qualitative screening to ensure the safety of patients from potential threat of thrombocytopenia. However, the intricacy of heparin's chemical structures and low abundance hinders the precise monitoring of its level and quality in clinical settings. Conventional laboratory assays have limitations in sensitivity and specificity, necessitating the development of innovative approaches. In this context, nanosensors emerged as a promising solution due to enhanced sensitivity, selectivity, and ability to detect heparin even at low concentrations. This review delves into a range of sensing approaches including colorimetric, fluorometric, surface-enhanced Raman spectroscopy, and electrochemical techniques using different types of nanomaterials, thus providing insights of its principles, capabilities, and limitations. Moreover, integration of smart-phone with nanosensors for point of care diagnostics has also been explored. Additionally, recent advances in nanopore technologies, artificial intelligence (AI) and machine learning (ML) have been discussed offering specificity against contaminants present in heparin to ensure its quality. By consolidating current knowledge and highlighting the potential of nanosensors, this review aims to contribute to the advancement of efficient, reliable, and economical heparin detection methods providing improved patient care.

Tetraphenylethene-modified polysiloxanes: Synthesis, AIE properties and multi-stimuli responsive fluorescence

Herein, polysiloxane-based aggregation-induced emission (AIE) polymers and rubbers were prepared which display interesting multi-stimuli responsive fluorescence. TPE-modified polydimethylsiloxanes (PDMS-TPE) as polysiloxane-based AIE polymers were synthesized through Heck reaction of bromo-substituted tetraphenylethene (TPE-Br) and vinyl polysiloxanes. As expected, TPE moiety endows the modified polysiloxane with typical AIE behavior. However, limited by the long polymer chains, the aggregation process of PDMS-TPE shows obvious differences compared with the small molecule TPE-Br. The fluorescence of PDMS-TPE in THF/H2O starts to increase when the H2O fraction (fw) is 70% while TPE-Br is nearly non-luminous until the fw is up to 99%. The fluorescence intensity ratio (I/I0) of PDMS-TPE in the aggregated state and dispersed state is over 1300, greater than that of TPE-Br (I/I0 = 380). More importantly, the exceptional thermal motion of Si-O-Si chains and AIE characteristic of TPE moiety work together, enabling PDMS-TPE to show specific temperature-dependent fluorescence with a wider response range of room temperature to 190°C, which is distinguished from TPE-Br. And such fluorescence responsiveness possess good fatigue-resistance. Furthermore, fluorescent silicone rubbers, r-PDMS-TPE were prepared by using PDMS-TPE as additive of the base gum. They display interesting solvent-controllable fluorescence and higher tensile strength (4.42 MPa) than the control sample without TPE component (1.96 MPa). Notably, a unique stretching-enhanced emission (SEE) phenomenon is observed from these TPE-modified silicone rubbers. When being stretched, the rubbers' fluorescent emission intensity could increase by 143%.

Molecular Engineering to Achieve AIE-active Fluorophore with Near-infrared (NIR) Emission and Temperature-sensitive Property

Near-infrared organic small molecule luminescent materials have the advantages of easy modification, high quantum efficiency, good biological affinity, and color adjustability; thus, have promising application prospects in the fields of photoelectric devices, sensitive detection, photodynamic therapy, and biomedical imaging. However, traditional organic luminescent molecules have the problems of short emission wavelength, aggregation-causing emission quenching, and low quantum yield. Herein, we successfully synthesized four D-π-A-D light-emitting molecules based on electron-withdrawing malonitrile group and different electron-donating arylamine groups. These compounds showed satisfactory solvatochromism, aggregation-induced emission, red and near-infrared fluorescence, high photoluminescence quantum efficiency and temperature response properties. This successful example of molecular engineering provides a valuable reference for the development of advanced NIR materials with AIE and temperature-sensitive properties.

Red Fluorescent Molecule with Aggregation-Induced Emission Based on Dehydroabietic Acid Diarylamine for Bioimaging

In this paper, molecules with AIE red light properties were designed by coupling dehydroabietic acid diarylamine and 2,3-diphenylfumaronitrile, which were designated 2DTPA-CN and 2TPA-CN. The emission wavelengths were 683 nm and 701 nm, respectively. The 2DTPA-CN and 2TPA-CN showed typical AIE characteristics with large Stokes shifts of 7.4 × 104 cm-1 and 6.7 × 104 cm-1, respectively. The obvious solvatochromism and electron cloud distributions of HOMO/LUMO in the ground and excited states both reveal the intramolecular charge transfer (ICT) effect. The 2DTPA-CN, boasting exceptional biocompatibility, was successfully prepared into nanoparticles (NPs), which were applied to tumor cell imaging, showing good bioimaging effects both in vitro imaging in live cells and in vivo imaging in live mice. The results demonstrated that it possesses significant potential as an effective bioimaging reagent for the detection of tumor cells. Furthermore, the incorporation of 2,3-diphenylfumaronitrile moieties to dehydroabietic acid diarylamine emerged as a proficient approach to broaden the emission wavelengths of rosin-based fluorescent materials.

Synthesis of tetraphenylethylene-based small molecular sensor for the selective "turn-on" detection of pyrophosphoric acid in the aqueous solution

Pyrophosphoric acid (PPi) is a crucial indicator for monitoring adenosine triphosphate hydrolysis processes, and abnormal PPi levels in the human body seriously threaten human health. Thus the efficient detection of the concentration of PPi in the aqueous solution is important and urgent. This paper described the successful synthesis of a tetraphenylethylene (TPE) derivative, named as TPE-4B, which contained four chelate pyridinium groups exhibiting aggregation-induced emission characteristics. TPE-4B was explicitly developed for the selective and sensitive fluorescence detection of PPi in aqueous solutions, showing a fluorescence "turn-on" response, and the detection limit was 65 nM. The four chelate pyridinium moieties of TPE-4B exhibited robust electrostatic interactions and binding capacity towards PPi, leading to the formation of aggregations, which was confirmed by zeta potential, dynamic light scattering, and scanning electron microscopy. Compared with free TPE-4B in the aqueous solution, the zeta potential of aggregations decreased from 20.7 to 4.2 mV, the average diameter increased from 155 to 403 nm, and the morphology transformed from porous nanostructures into a block-like format. Leveraging these properties, TPE-4B is a promising candidate for a "turn-on" fluorescence sensor designed to detect PPi in the aqueous solution.

Manipulation of aurophilicity in constructed clusters of gold(I) complexes with boosted luminescence and smart responsiveness

High-performance luminescent gold(I) complexes have attracted considerable attention due to their potential applications in various fields, but their construction is a significantly challenging task. Herein, we designed and synthesized a series of novel dinuclear gold(I) complexes 1-4 based on 1,2-bis(diphenylphosphino)benzene and 1,4-bis(diphenylphosphino)benzene frameworks, where para-substitutions of benzene ring were employed for comparison and bulky t-butyl groups were introduced into carbazole ligands to assist flexibly regulating the aurophilicity. Among them, the structure of complex 1 was confirmed by single-crystal X-ray diffraction, and all the complexes exhibited typical aggregation-induced emission characteristics. Due to the construction of intramolecular aurophilicity and the formation of molecular clusters, noticeable enhancement of the luminescent efficiency was achieved for the core complex 1. Together with the introduction of flexible t-butyl groups, good responsiveness towards external mechanical force and solvent vapors were also realized. Moreover, the specific bioimaging ability of complex 1 towards cancer cells was demonstrated. Thus, this work presents the crucial capability of aurophilic manipulation in tuning the luminescence and smart behaviors of gold complexes, and it will open a new route to developing high-performance luminescent materials.

CinNapht AIE(E)gens for selective imaging of lipid droplets

This article describes the synthesis and photophysical properties of Aggregation-Induced Emission (enhancement) luminogens derivated from CinNaphts dyes. These fluorophores can be obtained in good yields in a single SNAr step of a fluorinated CinNapht derivative by incorporating hindered aromatic amines. They exhibit AIE(E) behavior associated with solid-state fluorescence covering an emission range from 563 to 722 nm. One carbazole derivative demonstrates a remarkable efficiency in imaging lipid droplets in living cells through an original photophysical mechanism.

Recent advances in super-resolution optical imaging based on aggregation-induced emission

Super-resolution imaging has rapidly emerged as an optical microscopy technique, offering advantages of high optical resolution over the past two decades; achieving improved imaging resolution requires significant efforts in developing super-resolution imaging agents characterized by high brightness, high contrast and high sensitivity to fluorescence switching. Apart from technical requirements in optical systems and algorithms, super-resolution imaging relies on fluorescent dyes with special photophysical or photochemical properties. The concept of aggregation-induced emission (AIE) was proposed in 2001, coinciding with unprecedented advancements and innovations in super-resolution imaging technology. AIE probes offer many advantages, including high brightness in the aggregated state, low background signal, a larger Stokes shift, ultra-high photostability, and excellent biocompatibility, making them highly promising for applications in super-resolution imaging. In this review, we summarize the progress in implementation methods and provide insights into the mechanism of AIE-based super-resolution imaging, including fluorescence switching resulting from photochemically-converted aggregation-induced emission, electrostatically controlled aggregation-induced emission and specific binding-regulated aggregation-induced emission. Particularly, the aggregation-induced emission principle has been proposed to achieve spontaneous fluorescence switching, expanding the selection and application scenarios of super-resolution imaging probes. By combining the aggregation-induced emission principle and specific molecular design, we offer some comprehensive insights to facilitate the applications of AIEgens (AIE-active molecules) in super-resolution imaging.

3-Aroylbenzocoumarin-Based Luminogens: Bright Solid-State Emission, AIE Properties and Cell Imaging Application

A series of 3-aroylbenzocoumarin-based luminogens have been synthesized for investigating their aggregation-induced emission (AIE) and solid-state fluorescence. The single crystal X-ray diffraction analysis of one of them showed that the molecules are arranged in the form of π-dimers which may lead to excimer emission. The large Stokes shifts and the broad-band emission of these 3-aroylbenzocoumarins in solid/aggregation state demonstrated the probable formation of excimers. The shapes of benzocoumarin units have a great effect on the AIE behaviors. The linear benzocoumarin derivatives show larger Stokes shifts, while the bent-benzocoumarin derivatives exhibit better AIE performances. All of them show aggregation-enhanced excimer emission which is supported by the large Stokes shifts. The electronic effect of 3-aroyl groups also has a certain effect on their fluorescence properties. The polymorphism phenomenon was observed for one of the benzoyl-containing derivatives. Additionally, two of the derivatives containing methoxy group were successfully used for cell imaging.

Conformational Isomerization Effect on Singlet/Triplet Energy Consumption Process of Thermally Activated Delayed Fluorescence Molecules with Aggregation Induced Emission: A QM/MM Study

Thermally activated delayed fluorescence (TADF) molecules with aggregation-induced emission (AIE) properties hold tremendous potential in biomedical sensing/imaging and telecommunications. In this study, a multiscale method combined with thermal vibration correlation function (TVCF) theory is used to investigate the photophysical properties of the novel TADF molecule CNPy-SPAC in toluene and crystal and amorphous states. In the crystal state, an increase in radiative rates and a decrease in nonradiative rates lead to AIE. Additionally, conformational isomerization effects result in significantly different luminescent efficiencies between the two crystal structures. Furthermore, the isomerization effect allows for the coexistence of three configurations in the amorphous state. Among them, the non-TADF quasi-axial (Qa) configuration may facilitate energy transfer to the TADF-characteristic quasi-equal/quasi-equal-H (Qe/Qe-H) configurations, enhancing AIE. Moreover, the Qa configuration enables rapid electron transport, offering the potential for self-doped devices. Our work elucidates a new mechanism for the isomerization effect in AIE-TADF molecules.

A ratiometric fluorescent indicator-displacement assay for on-site determination and intracellular imaging of nitroxinil

Nitroxinil (NIT) is a widely using veterinary medicine to protect cattle and sheep yet may threaten human health when ingested through food chain. Developing fluorescent analytical methods in ratiometric manners was essential for the on-site detection and in-situ monitoring of NIT but still challenging. Here, we improved the indicator-displacement assay (IDA)-based method and designed the first ratiometric fluorescent probe for NIT by using an albumin host and an Aggregation-induced emission (AIE) guest. This probe exhibited fast response (10 s), high sensitivity (limit of detection: 4.6 ppb), good selectivity (over twelve medicines) and eye-discriminable fluorescent color change (green-red) upon responding to NIT. Based on these properties, this probe enabled quantitative determination of NIT in real food samples, on-site analysis via a paper-based test strip, and fluorescence imaging of NIT in living cells.

AIE luminogen labeled polymeric micelles for biological imaging and chemotherapy

In this study, an amphiphilic polymer FA-CS-DBA-CHO with aggregation-induced emission (AIE) feature was prepared by introducing 4-(diphenylamino)benzaldehyde derivative (DBA-CHO), imine bond and folic acid (FA) to the molecular structure of chitosan (CS). The amphiphilicity drove the polymer to self-assemble into micelles, and paclitaxel (PTX) could be solubilized in the hydrophobic core. Due to the excellent AIE effect, FA-CS-DBA-CHO exhibited strong cellular imaging capability. The pH-sensitive imine bond in the polymer allowed for accurate drug release in acidic environment. Both in vitro and in vivo studies demonstrated that the PTX-loaded FA-CS-DBA-CHO micelles could significantly inhibit the growth of tumor cells but without any notable toxicity. This micellar system was excellent carrier for bioimaging and chemotherapeutic drug delivery.

Advances and Perspectives of Responsive Probes for Measuring γ-Glutamyl Transpeptidase

Gamma-glutamyltransferase (GGT) is a plasma-membrane-bound enzyme that is involved in the γ-glutamyl cycle, like metabolism of glutathione (GSH). This enzyme plays an important role in protecting cells from oxidative stress, thus being tested as a key biomarker for several medical conditions, such as liver injury, carcinogenesis, and tumor progression. For measuring GGT activity, a number of bioanalytical methods have emerged, such as chromatography, colorimetric, electrochemical, and luminescence analyses. Among these approaches, probes that can specifically respond to GGT are contributing significantly to measuring its activity in vitro and in vivo. This review thus aims to highlight the recent advances in the development of responsive probes for GGT measurement and their practical applications. Responsive probes for fluorescence analysis, including "off-on", near-infrared (NIR), two-photon, and ratiometric fluorescence response probes, are initially summarized, followed by discussing the advances in the development of other probes, such as bioluminescence, chemiluminescence, photoacoustic, Raman, magnetic resonance imaging (MRI), and positron emission tomography (PET). The practical applications of the responsive probes in cancer diagnosis and treatment monitoring and GGT inhibitor screening are then highlighted. Based on this information, the advantages, challenges, and prospects of responsive probe technology for GGT measurement are analyzed.

Horseradish peroxidase-catalyzed polyacrylamide gels: monitoring their polymerization with BSA-stabilized gold nanoclusters and their functional validation in electrophoresis

Polyacrylamide gel (PAG) is extensively used as a matrix for biomolecular analysis and fractionation. However, the traditional polymerization catalyst system N,N,N',N'-tetramethylethylenediamine (TEMED)/ammonium persulphate (APS) of PAG presents non-negligible toxicity. Herein, we utilized the green and efficient bio-enzyme horseradish peroxidase (HRP) to catalyze the gel polymerization of polyacrylamide. At the same time, the efficacy of this gel system in separating nucleic acids and proteins was confirmed by applying the gel system in electrophoresis. This study aims to explore a higher biosafety polyacrylamide gel polymerization catalytic system which can be applied to electrophoresis technology. Furthermore, in order to differentiate between the bio-enzymatic catalytic system and the traditional toxic catalytic system during polymerization, aggregation-induced luminescence (AIE) of bovine serum albumin-stabilized gold nanoclusters (BSA-Au NCs) was used to monitor the polymerization reaction of the system. The results indicated that the fluorescence intensity of the polymeric system containing BSA-Au NCs increased with the polymerization of the monomers. Subsequently, we assessed whether certain components of nucleic acid electrophoresis and protein electrophoresis such as sodiumdodecylsulfate (SDS) and TBE buffer (Tris-boric acid, EDTA, pH 8.3) would affect the polymerization of the polyacrylamide gels catalyzed by the biological enzymes. The experimental conditions were also optimized to explore the optimal concentration of the ternary system of HRP, H2O2 and ACAC. Our results suggested that the bioenzyme-catalyzed system could be a feasible alternative to the TEMED/APS-catalyzed system, which also could provide new insights into the methods of monitoring the polymerization system.

Hypoxia-responsive AIEgens for precise disease theranostics

Specific biomarker-activatable probes have revolutionized theranostics, being beneficial for precision medicine. Hypoxia is a critical pathological characteristic prevalent in numerous major diseases such as cancers, cardiovascular disorders, inflammatory diseases, and acute ischemia. Aggregation-induced emission luminogens (AIEgens) have emerged as a promising tool to tackle the biomedical issues. Of particular significance are the hypoxia-responsive AIEgens, representing a kind of crucial probe capable of delicately sensing and responding to the hypoxic microenvironment, thereby enhancing the precision of disease diagnosis and treatment. In this review, we summarize the recent advances of hypoxia-responsive AIEgens for varied biomedical applications. The hypoxia-responsive structures based on AIEgens, such as azobenzene, nitrobenzene, and N-oxide are presented, which are in response to the reduction property to bring about significant alternations in response spectra and/or fluorescence intensity. The bioapplications including imaging and therapy of tumor and ischemia diseases are discussed. Moreover, the review sheds light on the future challenges and prospects in this field. This review aims to provide comprehensive guidance and understanding into the development of activatable bioprobes, especially the hypoxia-responsive AIEgens for improving the diagnosis and therapy outcome of related diseases.

Enhancing or Quenching of a Mitochondria-Targeted AIEgens-Floxuridine Sensor by the Regulation of pH-Dependent Self-assembly, Efficient Recognition of Hg2+, and Stimulated Response of GSH

Biocompatible fluorescent probes have emerged as essential tools in life sciences for visualizing subcellular structures and detecting specific analytes. Herein, we report the synthesis and characterization of a novel fluorescent probe (TPE-FdU), incorporated with hydrophilic 2'-fluoro-substituted deoxyuridine and hydrophobic ethynyl tetraphenylethene moieties, which possessed typical aggregation-induced emission (AIE) behavior. In comparison to the TPE-FdU (pKa 7.68) treated in neutral conditions, it performed well at pH 4, exhibiting an enhanced 450 nm emission signal of approximately four times stronger. As the pH value was increased to 10, the fluorescence intensity was completely quenched. The TEM images of TPE-FdU in an acidic environment (nanospherical morphology, AIE enhance, pH = 4) and in a basic environment (microrods, fluorescence quenching, pH = 9) revealed that it was a pH-dependent self-assembled probe, which was also illustrated by the interpretation of the NMR spectrum. Furthermore, the TPE-FdU probe exhibited a specific response to trace Hg2+ ions. Interestingly, the quenched fluorescence of the TPE-FdU probe caused by Hg2+ can be recovered by the addition of GSH due to the formation of the Hg-S bond being released away. MTT assay and CLSM images demonstrated that TPE-FdU was nontoxic and selectively visualized in the intracellular mitochondria. These results contributed to the development of advanced fluorescent probes with diverse applications in cell imaging, environment protection, and biomedical research.

A smartphone-based fluorescent sensor for rapid detection of multiple pathogenic bacteria

In this study, we developed a fluorescent sensor for the sensitive detection of multiple pathogenic bacteria based on magnetic separation, fluorescent probes, and smartphone image processing. A microchannel device was assembled using high-transparency resin and 3D printing technology. This device was combined with a smartphone and an external lens to develop a fluorescent sensor for autonomous detection of multiple pathogenic bacteria. Three fluorescence probes with different fluorescence were synthesized from highly specific aptamers and tetraphenylethylene derivatives. These fluorescent probes can make Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa emit different colors of fluorescence. Using the enrichment performance of molecularly imprinted materials, separation and detection of bacteria can be achieved simultaneously. Finally, with the Red-Green-Blue (RGB) analysis functionality of a smartphone, real-time field detection was realized with a sensitivity of 102 CFU/mL and a detection time of 40 min. This work provides a simple, inexpensive, and real-time sensor for the detection of multiple pathogens in medical diagnostics, food testing, and environmental analyses.

Fluorescence Enhancement of Adamantane-Modified Dyes in Aqueous Solution via Supramolecular Interaction with Methyl-β-cyclodextrin and Their Application in Cell Imaging

The fluorescence of functional dyes was generally quenched in aqueous solution, which hindered their application in water-bearing detections. In this work, a novel strategy based on host-guest interaction was provided for the purpose of fluorescence enhancement in aqueous solution and cell imaging. Three adamantane-modified fluorescent dyes (Coum-Ad, NP-Ad, NR-Ad) with coumarin, 1,8-naphthalimide and Nile Red as fluorophores were initially designed and prepared. The ((adamantan-1-yl)methyl)amino group, as the auxochrome of those dyes, complexed with methylated β-cyclodextrin (M-β-CD) via supramolecular interaction, and then fluorescent supramolecular nanoparticles (FSNPs) were formed by self-assembly in water. The inclusion equilibrium constant (K) could be as high as 3.94×104  M-1 . With the addition of M-β-CD, fluorescence quantum yields of these dyes were separately improved to 69.8 %, 32.9 % and 41.3 %. Inspired by the above satisfactory results, six adamantane-modified probes organelle-NPAds with organelle-targeting capability were further obtained. As the formation of hydrogen bonds between organelle-NPAd2 and M-β-CD verified by theoretical calculation, K of organelle-NPAd2 (5.13×104  M-1 ~4.53×105  M-1 ) with M-β-CD was higher than that of organelle-NPAd1 (1.15×104  M-1 ~3.66×104  M-1 ) and their fluorescence quantum yields increased to 32.8 %~83.6 % in aqueous solution. In addition, fluorescence enhancement was realized in cell imaging with the addition of M-β-CD.

Illuminating the path: aggregation-induced emission for food contaminants detection

Food safety is a global concern that deeply affects human health. To ensure the profitability of the food industry and consumer safety, there is an urgent need to develop rapid, sensitive, accurate, and cost-effective detection methods for food contaminants. Recently, the Aggregation-Induced Emission (AIE) has been successfully used to detect food contaminants. AIEgens, fluorescent dyes that cause AIE, have several valuable properties including high quantum yields, photostability, and large Stokes shifts. This review provides a detailed introduction to the principles and advantages of AIE-triggered detection, followed by a focus on the past five years' applications of AIE in detecting various food contaminants including pesticides, veterinary drugs, mycotoxins, food additives, ions, pathogens, and biogenic amines. Each detection principle and component is comprehensively covered and explained. Moreover, the similarities and differences among different types of food contaminants are summarized, aiming to inspire future researchers. Finally, this review concludes with a discussion of the prospects for incorporating AIEgens more effectively into the detection of food contaminants.

Flourescence sensors for heavy metal detection: major contaminants in soil and water bodies

Due to the increasing consumption of heavy metals, there is a rising need for specific and useful methods that are employed for the detection of heavy metals. Fluorescence sensing is a highly selective, rapid and biosensing technique that is employed in the determination of some heavy metals in any sample of soil or water, any other living person, the food being consumed or any other substance which are being used daily. These fluorescent methods are a type of analytical technique and they are mainly based on detection. Many types of metal conjugated molecules have been used of the detection of these heavy metals with various mechanisms. We have taken into account some specific sensor molecules as they were more suitable and easily accessible. These techniques that were employed in the detection of various heavy metals such as copper, lead and mercury have been discussed in the following review article.

A Multifunctional Aggregation-Induced Emission Luminogen with pH-Response Detachable Connector for Lipid Droplet-Specific Imaging and Tracing

Lipid droplets (LDs) targeting probes are important for investigating the biological functions of LDs. The interplay between LDs and some other organelles can help to further understand the biological functions of these organelles. However, it is still a challenge to design functional probes that can specifically target LDs and are responsive to some other organelles. Herein, a multifunctional aggregation-induced emission luminogen (AIEgen), namely the TPA-CN, was prepared by the simple aldimine condensation reaction for lipid droplet-specific imaging and tracing. TPA-CN can be sensitively responsive to the acid environment of lysosomes due to the pH-response detachable connector in TPA-CN. With the assistance of this characteristic, it can be concluded from the fluorescence imaging and co-localization analysis results that the internalization of TPA-CN and the targeting of LDs does not involve the lysosome and the lysosomal escape process. At last, the TPA-CN was successfully used for the high-sensitivity imaging of dynamic information of LDs.

The Role of Structural Hydrophobicity on Cationic Amphiphilic Aggregation-Induced Emission Photosensitizer-Bacterial Interaction and Photodynamic Efficiency

The aggregation-induced emission photosensitizer (AIE PS) has stood out as an alternative and competent candidate in bacterial theranostics, particularly with the use of cationic AIE PS in bacterial discrimination and elimination. Most reported work emphasizes the role of electrostatic interaction between cationic AIE PS and negatively charged bacterial surfaces, enabling broad applications from bacterial discrimination to bacterial killing. However, the underlying targeting mechanism and the design rationale of the cationic AIE PS for effective bacterial labeling remain poorly investigated. In this Article, we designed and synthesized a series of cationic amphiphilic AIE PSs with different calculated log P values. Then, we systemically studied the relationship between the hydrophobicity variation of AIE PS and bacterial targeting outcomes, the dose of AIE PS needed to label various species of bacteria, and their photodynamic antibacterial efficiency. The findings in this work provide a better understanding of the unclear AIE PS-bacterial interaction mechanism and some insights into the structural design strategies of cationic amphiphilic AIE PS for better development in bacterial theranostics.

A novel AIE fluorescence probe featuring with high quantum yield for high-fidelity lysosomal targeting and tracking

High-fidelity imaging and long-term visualization of lysosomes are pivotal factors in the functional assessment of lysosomes, which perform an instrumental role in the physiological activity of cells. However, commercial probes have great limitations in lysosome exploration resulting from the aggregation-caused quenching effect as well as photobleaching instability and small Stokes shift. Therefore, we constructed a novel probe named TTAM with triphenylamine as the matrix and morpholine ring as the targeting group. In contrast with commonly accessible Lyso-tracker Red, TTAM has the merits of aggregation-induced emission effect, extremely high quantum yields (51.57 % solid-state) as well as fluorescence intensity, significant photostability, and high resolution. These properties make it ideal for imaging and activity monitoring lysosomes, which provides a powerful condition for bio-imaging.

Aggregation enhanced fluorescence and Raman signals for highly sensitive cancer detection

The implementation of early cancer detection benefits the treatment outcomes with remarkably improved survival rate through the detection of rare circulating biomarkers in body fluids. Spectroscopic technologies play a crucial role in sensitive biomarker measurements by outputting extremely strong signals. In particular, the aggregation enhanced fluorescence and Raman technologies feature the detection of targets down to single-molecule level, thereby demonstrating the great promise of early cancer detection. In this review, we focus on the aggregation-induced emission (AIE) and aggregation-related surface-enhanced Raman scattering (SERS) spectroscopic strategies for detecting cancer biomarkers. We discuss the AIE and SERS based biomarker detection using target-driven aggregation as well as the aggregated nanoprobes. Furthermore, we deliberate on the progress of developing AIE and SERS integrated platforms. Ultimately, we put forth the potential challenges and perspectives on the way to use these two spectroscopic technologies in clinical settings. It is expected this review can inspire the design of AIE and SERS integrated platform for highly sensitive and accurate cancer detection.

Self-Illuminating NIR-II Chemiluminescence Nanosensor for In Vivo Tracking H2 O2 Fluctuation

Chemiluminescence (CL) imaging, as an excitation-free technique, exhibits a markedly improved signal-to-noise ratio (SNR) owing to the absence of an excitation light source and autofluorescence interference. However, conventional chemiluminescence imaging generally focuses on the visible and first near-infrared (NIR-I) regions, which hinders high-performance biological imaging due to strong tissue scattering and absorption. To address the issue, self-luminescent NIR-II CL nanoprobes with a second near-infrared (NIR-II) luminescence in the presence of hydrogen peroxide are rationally designed. A cascade energy transfer, including chemiluminescence resonance energy transfer (CRET) from the chemiluminescent substrate to NIR-I organic molecules and Förster resonance energy transfer (FRET) from NIR-I organic molecules to NIR-II organic molecules, occurs in the nanoprobes, contributing to NIR-II light with great efficiency and good tissue penetration depth. Based on excellent selectivity, high sensitivity to hydrogen peroxide, and long-lasting luminescence performance, the NIR-II CL nanoprobes are applied to detect inflammation in mice, showing a 7.4-fold enhancement in SNR compared with that of fluorescence.

Recent Advances in Fluorescent Probes for Zinc Ions Based on Various Response Mechanisms

Zinc is a vital metal element with extensive applications in various fields such as industry, metallurgy, agriculture, food, and healthcare. For living organisms, zinc ions are indispensable, and their deficiency can lead to physiological and metabolic abnormalities that cause multiple diseases. Hence, there is a significant need for selective recognition and effective detection of free zinc ions. As a probe method with high sensitivity, high selectivity, real-time monitoring, safety, harmlessness and ease of operation, fluorescent probes have been widely used in metal ion identification studies, and many convenient, low-cost and easy-to-operate fluorescent probes for Zn²⁺ detection have been developed. This article reviews the latest research advances in fluorescent chemosensors for Zn²⁺ detection from 2019 to 2023. In particular, sensors working through photo-induced electron transfer (PET), excited state intramolecular proton transfer (ESIPT), intramolecular charge transfer (ICT), fluorescence resonance energy transfer (FRET), chelation-enhanced fluorescence (CHEF), and aggregation-induced emission (AIE) mechanisms are described. We discuss the use of various recognition mechanisms in detecting zinc ions through specific cases, some of which have been validated through theoretical calculations.

Fluorescent detection of emerging virus based on nanoparticles: From synthesis to application

The spread of COVID-19 has caused huge economic losses and irreversible social impact. Therefore, to successfully prevent the spread of the virus and solve public health problems, it is urgent to develop detection methods with high sensitivity and accuracy. However, existing detection methods are time-consuming, rely on instruments, and require skilled operators, making rapid detection challenging to implement. Biosensors based on fluorescent nanoparticles have attracted interest in the field of detection because of their advantages, such as high sensitivity, low detection limit, and simple result readout. In this review, we systematically describe the synthesis, intrinsic advantages, and applications of organic dye-doped fluorescent nanoparticles, metal nanoclusters, up-conversion particles, quantum dots, carbon dots, and others for virus detection. Furthermore, future research initiatives are highlighted, including green production of fluorescent nanoparticles with high quantum yield, speedy signal reading by integrating with intelligent information, and error reduction by coupling with numerous fluorescent nanoparticles.

Long-term spatiotemporal and highly specific imaging of the plasma membrane of diverse plant cells using a near-infrared AIE probe

Fluorescent probes are valuable tools to visualize plasma membranes intuitively and clearly and their related physiological processes in a spatiotemporal manner. However, most existing probes have only realized the specific staining of the plasma membranes of animal/human cells within a very short time period, while almost no fluorescent probes have been developed for the long-term imaging of the plasma membranes of plant cells. Herein, we designed an AIE-active probe with NIR emission to achieve four-dimensional spatiotemporal imaging of the plasma membranes of plant cells based on a collaboration approach involving multiple strategies, demonstrated long-term real-time monitoring of morphological changes of plasma membranes for the first time, and further proved its wide applicability to plant cells of different types and diverse plant species. In the design concept, three effective strategies including the similarity and intermiscibility principle, antipermeability strategy and strong electrostatic interactions were combined to allow the probe to specifically target and anchor the plasma membrane for an ultralong amount of time on the premise of guaranteeing its sufficiently high aqueous solubility. The designed APMem-1 can quickly penetrate cell walls to specifically stain the plasma membranes of all plant cells in a very short time with advanced features (ultrafast staining, wash-free, and desirable biocompatibility) and the probe shows excellent plasma membrane specificity without staining other areas of the cell in comparison to commercial FM dyes. The longest imaging time of APMem-1 can be up to 10 h with comparable performance in both imaging contrast and imaging integrity. The validation experiments on different types of plant cells and diverse plants convincingly proved the universality of APMem-1. The development of plasma membrane probes with four-dimensional spatial and ultralong-term imaging ability provides a valuable tool to monitor the dynamic processes of plasma membrane-related events in an intuitive and real-time manner.

Highly Fluorescent Magnetic ATT-AuNCs@ZIF-8 for All-in-One Detection and Removal of Hg2+: An Ultrasensitive Probe to Evaluate Its Removal Efficiency

The development of multifunctional materials for the synchronous detection and removal of mercury ions (Hg²⁺) is in high demand. Although a few multifunctional materials as a fluorescent indicator and adsorbent have achieved this aim, the feedback of their removal efficiency still depends on other methods. Herein, magnetic Fe₃O₄ nanoparticles (MNPs) and 6-aza-2-thiothymine-protected gold nanoclusters (ATT-AuNCs) were rationally assembled into a zeolitic imidazolate framework 8 (ZIF-8) structure via a one-pot method. The coordination assembly of ATT-AuNCs and ZIF-8 not only strengthened the aurophilic interactions of adjacent ATT-AuNCs but also induced the restriction of intramolecular motion of ATT with a six-membered heterocyclic structure. As a consequence, the fluorescence (FL) quantum yield of MNPs/ATT-AuNCs@ZIF-8 was 12.5-fold higher than that of pristine ATT-AuNCs. Benefiting from the enhanced FL emission, MNPs/ATT-AuNCs@ZIF-8 showed improved sensitivity for Hg²⁺ detection and therefore could evaluate the removal efficiency via FL detection, without relying on another detection method. Additionally, the nanocomposite also displayed a satisfactory removal capability for Hg²⁺, including a short capture time (20 min), a high removal efficiency (>96.9%), and excellent reusability (10 cycles). This work provides an approach for customizing functional nanocomposites to concurrently detect and remove Hg²⁺ with superior performance, especially for high detection sensitivity.

Fluorescent molecular probes for imaging and detection of oxidases and peroxidases in biological samples

Oxidases and peroxidases are two subclasses of oxidoreductases. The abnormal expression of oxidases (such as tyrosinase, cytochrome P450 oxidases, and monoamine oxidases) and peroxidases (such as glutathione peroxidase, myeloperoxidase, and eosinophil peroxidase) is relative with some diseases. Therefore, the analysis of oxidases and peroxidases is great important for disease diagnosis and treatment. Fluorescent probes present simple protocol, high sensitivity and good stability in sensing field. Molecule fluorescent probes are constructed with chemical groups that tunes their fluorescence emission in response to binding events, chemical reactions, and the surrounding environment. A fluorescent probe is an efficient tool for visualizing the activity of enzymes in living organisms on the basis of its high specificity, sensitivity, and noninvasiveness characteristics. In this review, we focus on the sensing of oxidases and peroxidases by molecule fluorescent probes, and hope to bring new insight to wide researchers about oxidases and peroxidases in biological samples.

Label-free Aptasensor for the Ultrasensitive Detection of Insulin Via a Synergistic Fluorescent Turn-on Strategy Based on G-quadruplex and AIEgens

Insulin, the only hormone regulating blood glucose level, is strongly associated with diabetes and its complications. Specific recognition and ultrasensitive detection of insulin are of clinical significance for the early diagnosis and treatment of diabetes. Inspired by aggregation-induced emission, we presented a turn-on label-free fluorescence aptasensor for insulin detection. Quaternized tetraphenylethene salt was synthesized as the fluorescence probe. Guanine-rich aptamer IGA3 was selected as recognition element. Graphene oxide was chosen as the quencher. Under optimized conditions, the fluorescence aptasensor displayed a wide linear range (1.0 pM-1.0 μM) with a low limit of detection (0.42 pM). Furthermore, the aptasensor was successfully applied to detect insulin in human serum. Spiked recoveries were obtained in the range of 96.06%-104.26%. All these results demonstrated that the proposed approach has potential application in the clinical diagnostics of diabetes.

A novel aggregation-induced emission fluorescent probe with large Stokes shift for sensitive detection of pH changes in live cells

The detection of intracellular pH is crucial for elucidating the pathological process of cancers, as well as for medical diagnostic applications. Here, we developed an aggregation-induced emission active pH-responsive fluorescent probe (TPE-DCP) for sensitively detecting cell pH changes. The probe shows obvious pH-sensing properties at ~615 nm, with a pKa value of 6.82 and a good linear pH response ranging from 8.5 to 4.5. TPE-DCP holds advantages such as excellent anti-interference performance, good photostability, and low cytotoxicity, and has been successfully used to image intracellular pH changes in cells.

An AIE based fluorescent chemosensor for ratiometric detection of hypochlorous acid and its application

Detecting and imaging intracellular hypochlorous acid (HClO) is of great importance owning to its prominent role in numerous pathological and physiological processes. In this contribution, a novel AIE-based fluorescent chemosensor has been developed by employing a benzothiazole derivative. The synthesized probe displayed remarkable ratiometric fluorescent response to HClO with a large emission shift (139 nm), resulting in naked-eye fluorescence changes from red to blue. Under the optimal conditions, this probe was capable of quantitatively detecting HClO within 10 s, and possessed good sensitivity and high selectivity toward HClO over other biologically relevant species. Moreover, it has been successfully utilized to image the exogenous and endogenous HClO in living cells through dual channels, and conveniently detect hypochlorous acid solution on test strips with better accuracy, demonstrating its potential for monitoring HClO in biological and environment fields.

AIE-Featured Redox-Sensitive Micelles for Bioimaging and Efficient Anticancer Drug Delivery

In the present study, an amphiphilic polymer was prepared by conjugating methoxy poly(ethylene glycol) (mPEG) with tetraphenylethene (TPE) via disulfide bonds (Bi(mPEG-S-S)-TPE). The polymer could self-assemble into micelles and solubilize hydrophobic anticancer drugs such as paclitaxel (PTX) in the core. Combining the effect of TPE, mPEG, and disulfide bonds, the Bi(mPEG-S-S)-TPE micelles exhibited excellent AIE feature, reduced protein adsorption, and redox-sensitive drug release behavior. An in vitro intracellular uptake study demonstrated the great imaging ability and efficient internalization of Bi(mPEG-S-S)-TPE micelles. The excellent anticancer effect and low systemic toxicity were further evidenced by the in vivo anticancer experiment. The Bi(mPEG-S-S)-TPE micelles were promising drug carriers for chemotherapy and bioimaging.

Reactive Species-Activatable AIEgens for Biomedical Applications

Precision medicine requires highly sensitive and specific diagnostic strategies with high spatiotemporal resolution. Accurate detection and monitoring of endogenously generated biomarkers at the very early disease stage is of extensive importance for precise diagnosis and treatment. Aggregation-induced emission luminogens (AIEgens) have emerged as a new type of excellent optical agents, which show great promise for numerous biomedical applications. In this review, we highlight the recent advances of AIE-based probes for detecting reactive species (including reactive oxygen species (ROS), reactive nitrogen species (RNS), reactive sulfur species (RSS), and reactive carbonyl species (RCS)) and related biomedical applications. The molecular design strategies for increasing the sensitivity, tuning the response wavelength, and realizing afterglow imaging are summarized, and theranostic applications in reactive species-related major diseases such as cancer, inflammation, and vascular diseases are reviewed. The challenges and outlooks for the reactive species-activatable AIE systems for disease diagnostics and therapeutics are also discussed. This review aims to offer guidance for designing AIE-based specifically activatable optical agents for biomedical applications, as well as providing a comprehensive understanding about the structure-property application relationships. We hope it will inspire more interesting researches about reactive species-activatable probes and advance clinical translations.

Design and fabrication of chitosan-based AIE active micelles for bioimaging and intelligent delivery of paclitaxel

In this study, cetyl 4-formylbenzoate alkyl and 4-(2-hydroxyethoxy) benzophenonesalicylaldazide modified biotinylated chitosan (CS-BT-HBS-CB) featured with aggregation-induced emission (AIE) characteristic, active tumor-targeting ability and pH-responsive drug release property was designed and synthesized. The polymer was fabricated by introducing hydrophobic segment, tumor targeting ligand, acid-sensitive bond and AIE fluorophore to the backbone of chitosan. Due to its amphiphilicity, the polymer could self-assemble into micelles and encapsulate paclitaxel (PTX) to form PTX-loaded CS-BT-HBS-CB micelles. The mean size of the micelles was 167 nm, which was beneficial to the EPR effect. Moreover, with the help of above functional groups, the micelles exhibited excellent AIE effect, triggered drug release behavior by acidic condition, selective internalization by MCF-7 cells and excellent cellular imaging capability. In vivo studies revealed that the PTX-loaded CS-BT-HBS-CB micelles could enhance the antitumor efficacy with low systemic toxicity. This micellar system would be a potential candidate for cancer therapy and bioimaging.