A comprehensive approach to the analysis of antibiotic-metal complexes

Organophosphate esters (OPEs) pollution characteristics, bioaccumulation and human consumption implication in wild marine organisms from the Yellow River Estuary, China

As the substitutes of polybrominated diphenyl ethers, organophosphate esters (OPEs) with high concentrations have accumulated in the estuaries, bays, and harbors. However, limited information is available about the OPEs in the estuary organism categories, especially under the multiple industrial pressure. This study investigated the occurrence, bioaccumulation and human consumption implication in wild marine organisms from the Yellow River Estuary, where located many petroleum and chemical manufacturing industries. This study found that concentrations of Σ13OPEs ranged from 547 ng/L to 1164 ng/L in seawater (median: 802 ng/L), from 384 to 1366 ng/g dw in the sediment (median: 601 ng/g dw), and from 419 to 959 ng/g dw (median: 560 ng/g dw) in the marine organisms. The congener compositions in the organisms were dominated by alkyl-OPEs (80.7 %), followed by halogenated-OPEs (18.8 %) and aryl-OPEs (0.5 %). Based on the principal component analysis, petrochemical pollution, and industrial wastewater discharge were distinguished as the main plausible sources of OPEs to the YRE ecosystem. Most OPEs had potential or strong bioaccumulation capacity on the organisms, with a positive correlation between log BAF (Bioaccumulation Factor) and log Kow of OPEs. The highest estimated daily intake value of OPEs was tri-n-propyl phosphate, exceeding 300 ng/kg·bw/day via consuming fish. The highest hazard quotients from OPEs ranged from 0.001 to 0.1, indicating a low risk to human health by consuming marine organisms in the YRE. As the consumption of OPEs increases year by year, the risks of OPEs still cannot be ignored.

Insights into the Versatility of Using Atomic Absorption Spectrometry in Antibacterial Research

The ongoing development of bacterial resistance to antibiotics is a global challenge. Research in that field is thus necessary. Analytical techniques are required for such a purpose. From this perspective, the focus was on atomic absorption spectrometry (AAS). Although it is old, AAS often offers unexpected potential. Of course, this should be exploited. The aim was therefore to demonstrate the versatility of the technique in antibacterial research. This is illustrated by various examples of its practical application. AAS can be used, for example, to confirm the identity of antibacterial compounds, for purity controls, or to quantify the antibiotics in pharmaceutical preparations. The latter allowed analysis without laborious sample preparation and without interference from other excipients. In addition, AAS can help elucidate the mode of action or resistance mechanisms. In this context, quantifying the accumulation of the antibiotic drug in the cell of (resistant) bacteria appears to play an important role. The general application of AAS is not limited to metal-containing drugs, but also enables the determination of some organic chemical antibiotics. Altogether, this perspective presents a range of applications for AAS in antibacterial research, intending to raise awareness of the method and may thus contribute to the fight against resistance.

Urban agglomerations as an environmental dimension of antibiotics transmission through the "One Health" lens

The spatiotemporal distributions of antibiotics in different media have been widely reported; however, their occurrence in the environmental dimension of the Chinese urban agglomerations has received less attention, especially in bioaccumulation and health risks of antibiotics through the "One Health" lens. The review presents the current knowledge on the environmental occurrence, bioaccumulation, as well as health exposure risks in urban agglomerations through the "One Health" lens, and identifies current information gaps. The reviewed studies suggested antibiotic concentrations in water and soil were more sensitive to social indicators of urban agglomerations than those in sediment. The ecological risk and resistance risk of antibiotics in water were much higher than those of sediments, and the high-risk phenomenon occurred at a higher frequency in urban agglomerations. Erythromycin-H2O (ETM-H2O), amoxicillin (AMOX) and norfloxacin (NFC) were priority-controlled antibiotics in urban waters. Tetracyclines (TCs) posed medium to high risks to soil organisms in the soil of urban agglomerations. Health risk evaluation based on dietary intake showed that children had the highest dietary intake of antibiotics in urban agglomerations. The health risk of antibiotics was higher in children than in other age groups. Our results also demonstrated that dietary structure might impact health risks associated with target antibiotics in urban agglomerations to some extent.

Addressing the gaps in homeostatic mechanisms of copper and copper dithiocarbamate complexes in cancer therapy: a shift from classical platinum-drug mechanisms

The platinum drug, cisplatin, is considered as among the most successful medications in cancer treatment. However, due to its inherent toxicity and resistance limitations, research into other metal-based non-platinum anticancer medications with diverse mechanisms of action remains an active field. In this regard, copper complexes feature among non-platinum compounds which have shown promising potential as effective anticancer drugs. Moreover, the interesting discovery that cancer cells can alter their copper homeostatic processes to develop resistance to platinum-based treatments leads to suggestions that some copper compounds can indeed re-sensitize cancer cells to these drugs. In this work, we review copper and copper complexes bearing dithiocarbamate ligands which have shown promising results as anticancer agents. Dithiocarbamate ligands act as effective ionophores to convey the complexes of interest into cells thereby influencing the metal homeostatic balance and inducing apoptosis through various mechanisms. We focus on copper homeostasis in mammalian cells and on our current understanding of copper dysregulation in cancer and recent therapeutic breakthroughs using copper coordination complexes as anticancer drugs. We also discuss the molecular foundation of the mechanisms underlying their anticancer action. The opportunities that exist in research for these compounds and their potential as anticancer agents, especially when coupled with ligands such as dithiocarbamates, are also reviewed.

Polycyclic aromatic hydrocarbons (PAHs) and antibiotics in oil-contaminated aquaculture areas: Bioaccumulation, influencing factors, and human health risks

Polycyclic aromatic hydrocarbon (PAH) pollution caused by marine oil spills and antibiotic pollution caused by aquaculture industries were common environmental problems in the Yellow River Estuary, China. But few data are reported on the bioaccumulation and influencing factors of these two types of contaminants in aquaculture simultaneously. This study investigated the occurrence and bioaccumulation of PAHs and antibiotics in aquaculture areas of the Yellow River Estuary, and explored the factors affecting the bioaccumulation. 3-ring PAHs and fluoroquinolones were dominant contaminants in the study area. The concentrations of PAHs and antibiotics in lipid-rich tissues (fish viscus, shrimp head, and crab ovary) was higher than that in muscle. It indicated that the lipid content was an important factor affecting the bioaccumulation capacity. Physicochemical parameters (K_ow and D_lipw) and the concentrations of PAHs or antibiotics also affected the bioaccumulation capacity of them. Meanwhile, biotransformation was a factor affecting the bioaccumulation of PAHs and antibiotics. The biotransformation (pyrene to 1-hydroxypyrene and enrofloxacin to ciprofloxacin) might explain the poor correlation between log bioaccumulation factor and log K_ow/log D_lipw in fish. Risk assessment indicated that PAHs in mature aquatic products posed carcinogenic risks to human and enoxacin in sea cucumbers posed health risks to human.

Coordination Properties of the Zinc Domains of BigR4 and SmtB Proteins in Nickel Systems─Designation of Key Donors

The increasing number of antibiotic-resistant pathogens has become one of the foremost health problems of modern times. One of the most lethal and multidrug-resistant bacteria is Mycobacterium tuberculosis (Mtb), which causes tuberculosis (TB). TB continues to engulf health systems due to the significant development of bacterial multidrug-resistant strains. Mammalian immune system response to mycobacterial infection includes, but is not limited to, increasing the concentration of zinc(II) and other divalent metal ions in phagosome vesicles up to toxic levels. Metal ions are necessary for the survival and virulence of bacteria but can be highly toxic to organisms if their concentrations are not strictly controlled. Therefore, understanding the mechanisms of how bacteria use metal ions to maintain their optimum concentrations and survive under lethal environmental conditions is essential. The mycobacterial SmtB protein, one of the metal-dependent transcription regulators of the ArsR/SmtB family, dissociates from DNA in the presence of high concentrations of metals, activating the expression of metal efflux proteins. In this work, we explore the properties of α5 metal-binding domains of SmtB/BigR4 proteins (the latter being the SmtB homolog from nonpathogenic Mycobacterium smegmatis), and two mutants of BigR4 as ligands for nickel(II) ions. The study focuses on the specificity of metal–ligand interactions and describes the effect of mutations on the coordination properties of the studied systems. The results of this research reveal that the Ni(II)-BigR4 α5 species are more stable than the Ni(II)-SmtB α5 complexes. His mutations, exchanging one of the histidines for alanine, cause a decrease in the stability of Ni(II) complexes. Surprisingly, the lack of His102 resulted also in increased involvement of acidic amino acids in the coordination. The results of this study may help to understand the role of critical mycobacterial virulence factor—SmtB in metal homeostasis. Although SmtB prefers Zn(II) binding, it may also bind metal ions that prefer other coordination modes, for example, Ni(II). We characterized the properties of such complexes in order to understand the nature of mycobacterial SmtB when acting as a ligand for metal ions, given that nickel and zinc ArsR family proteins possess analogous metal-binding motifs. This may provide an introduction to the design of a new antimicrobial strategy against the pathogenic bacterium M. tuberculosis.

The histidine-rich α5 domains of SmtB (L4, Mycobacterium tuberculosis) and BigR4 (L1, Mycobacterium smegmatis) were studied as ligands for Ni(II). Point mutation analysis of L1 revealed that His102 and 106 preferably bind metal ions. The general Ni(II)-binding motif for both of the ligands was established as HX3HX3DX3HX2ED. L1 forms more stable complexes than L4 due to the stabilizing effect of arginine residues.

Metal Complexes as DNA Synthesis and/or Repair Inhibitors: Anticancer and Antimicrobial Agents

Medicinal inorganic chemistry involving the utilization of metal-based compounds as therapeutics has become a field showing distinct promise. DNA and RNA are ideal drug targets for therapeutic intervention in the case of various diseases, such as cancer and microbial infection. Metals play a vital role in medicine, with at least 10 metals known to be essential for human life and a further 46 nonessential metals having been involved in drug therapies and diagnosis. These metal-based complexes interact with DNA in various ways, and are often delivered as prodrugs which undergo activation in vivo. Metal complexes cause DNA crosslinking, leading to the inhibition of DNA synthesis and repair. In this review, the various interactions of metal complexes with DNA nucleic acids, as well as the underlying mechanism of action, were highlighted. Furthermore, we also discussed various tools used to investigate the interaction between metal complexes and the DNA. The tools included in vitro techniques such as spectroscopy and electrophoresis, and in silico studies such as protein docking and density-functional theory that are highlighted for preclinical development.

Studies on meropenem and cefixime metal ion complexes for antibacterial activity

Background

The metal ion complexes of meropenem and cefixime with cadmium, silver, palladium, zinc, nickel, cobalt and copper were synthesized and characterized by UV, FTIR and H1-NMR spectrophotometry. The antibacterial effects of the complexes were studied using cup and plate method against S. aureus, B. subtilis, E. coli, P. aeruginosa and K. pneumoniae for normal and resistant strains of bacteria. The minimum inhibitory concentration of the metal ion complexes was determined by broth dilution method.

Results

UV spectroscopic studies suggested that meropenem ligand form complex with different metal ions and FTIR spectrum confirmed the proposed structure. Similarly, UV spectrum of cefixime metal ion complexes at λmax 202–295 nm and meropenem metal ion complexes at λmax 249–304 nm was observed in all the complexes. FTIR peaks for a proposed structure were observed in all the meropenem and cefixime metal ion, indicating the formation of complexes, and retained the functional groups of drugs. Meropenem as well as cefixime metal ion complexes exhibited more antibacterial activity against all the selected bacterial strains. Specifically, the lowest minimum inhibitory concentration against P. aeruginosa and K. pneumoniae was observed to be 100 and 150 μg/ml, respectively.

Conclusion

The present study concluded that the meropenem and cefixime metal complexes can exhibit the better treatment than individual drug on normal as well as resistant bacteria.

Antibiotic-metal complexes in wastewaters: fate and treatment trajectory

Unregulated usage, improper disposal, and leakage from pharmaceutical use and manufacturing sites have led to high detection levels of antibiotic residues in wastewater and surface water. The existing water treatment technologies are insufficient for removing trace antibiotics and these residual antibiotics tend to interact with co-existing metal ions and form antibiotic-metal complexes (AMCs) with altered bioactivity profile and physicochemical properties. Typically, antibiotics, including tetracyclines, fluoroquinolones, and sulphonamides, interact with heavy metals such as Fe²⁺, Co²⁺, Cu²⁺, Ni²⁺, to form AMCs which are more persistent and toxic than parent compounds. Although many studies have reported antibiotics detection, determination, distribution and risks associated with their environmental persistence, very few investigations are published on understanding the chemistry of these complexes in the wastewater and sludge matrix. This review, therefore, summarizes the structural features of both antibiotics and metals that facilitate complexation in wastewater. Further, this work critically appraises the treatment methods employed for antibiotic removal, individually and combined with metals, highlights the knowledge gaps, and delineates future perspectives for their treatment.

Synthesis, characterization, and antibacterial studies of pipemidic acid metal complexes

Background

Pipemidic acid, like other quinolones, is susceptible against different organisms in vitro, and it was proved to be a preferred choice for certain indications. Previous studies reveal that concurrent administration of essential and trace elements with quinolones decreases gastrointestinal absorption, causing therapeutic failure. To study the probable interaction of pipemidic acid with essential and trace elements present in the human body, pipemidic acid has been reacted with magnesium, calcium, chromium, manganese, iron, cobalt, nickel, copper, zinc, and cadmium, the complexes formed.

Results

The compounds were characterized by the melting point, conductance studies, IR, UV, 1H-NMR, CHN, and atomic absorption analysis.

Conclusion

The results suggested oxygen atoms present at carbonyl and carboxylic group render the bidentate6 property to the pipemidic acid. The antimicrobial activity of the compounds was determined by the disk diffusion method, and both standard and complexes show no antibacterial activity against the clinical isolates.

A new antidiabetic foot bacteria formula from marine chitosan nanosilver-metal complex

In more than two-thirds of the diabetic foot ulcer (DFUs) cases, lower limb amputation of foot ulceration is caused by the infection. The role of transition a metal complex as a therapeutic compound is becoming increasingly important. In vitro, four groups of antibiotics and one sulfa drug were tested against diabetic foot resistant bacteria. Using three concentrations of two different prepared metal complexes: copper (Cu) and silver (Ag) - isoniazid (Iso) and nicotinamide (Nicot) were tested against diabetic foot isolates. Results revealed that β-lactam drugs (cephradine and piperacillin) showed the minimum averages of MIC 265 μg/ml against Gram-positive and Gram-negative isolates. Silver isoniazid (Iso-Ag-1) metal complex was selected depending on the maximum averages of MIC against both types of clinical isolates. The combination between β-lactams and Iso-Ag-1 showed maximum FICI averages of 0.24 for Gram-positive and 0.28 for Gram-negative. In addition, a combination between Iso-Ag-1 with squilla chitosan nanoparticles (CSSq-nAg) showed averages of synergistic index by 0.23 against Staphylococcus aureus and 0.13, 0.30, and 0.27 against E. coli, K. pneumoniae, and Ps. aeruginosa, respectively. Final formula of Iso-Ag-1+CSSq-nAg + β-lactams (cephradine and piperacillin) showed a synergistic effect at FICI = 0.044 and 0.047, against G+ve and -ve, respectively. These two combinations showed a slight toxicity against the water flea Daphnia magna by 3.49 and 3.6 ppm, respectively. Results suggest the use of Iso-Ag-1-CSSq-nAg as enhancing agent in combination with β-lactams as a blind therapy in pharmaceutical preparations.

Antibiotics in mariculture organisms of different growth stages: Tissue-specific bioaccumulation and influencing factors

Maricultured organisms are chronically exposed to water containing antibiotics but the bioaccumulative behavior of antibiotics in exposed organisms at different growth stages has received little attention. Here, we investigated the concentrations and tissue-specific bioaccumulation characteristics of 19 antibiotics during three growth stages (youth stage, growth stage, and adult stage) of various organisms (Scophthalmus maximus, Penaeus vannamei, Penaeus japonicus, and Apostichopus japonicus) cultivated in typical marine aquaculture regions, and explored the factors that could affect the bioaccumulation of antibiotics. Tetracyclines (TCs) and fluoroquinolones (FQs) were the dominant antibiotics in all organisms, and the total concentrations of the target antibiotics in fish (S. maximus) were significantly higher than those in shrimp (P. vannamei and P. japonicus) and sea cucumber (A. japonicus) (p < 0.01). The bioaccumulation capacity of a class of statistically significant antibiotics in most samples was strongest during the youth stage and weakest during the adult stage. The antibiotics exhibited higher bioaccumulation capacity in lipid-rich tissues (fish liver and shrimp head) or respiratory organs (fish gill) than muscle. Our results also reveal significant metabolic transformation of enrofloxacin in fish. Different from previous studies, the logarithm bioaccumulation factor (log BAF) was positively correlated with log D_lipw in low-biotransformation tissues (fish gill and muscle) rather than lipid-rich tissues (fish liver). Based on the calculated hazard quotients (HQ), doxycycline in fish muscle may pose a distinct risk to human health, which deserves special attention. Overall, these results provide insight into the bioaccumulation patterns of antibiotics during different growth stages and tissues of maricultured organisms.

Invited review: Stress resistance of Cronobacter spp. affecting control of its growth during food production

Members of the Cronobacter genus include food-borne pathogens that can cause infections in infants, with a mortality rate as high as 40 to 80%. The high fatality rate of Cronobacter and its isolation from numerous types of food, especially from powdered infant formula, demonstrate the serious nature of this organism. The source tracking of Cronobacter spp. and the analysis of high-frequency species from different sources are helpful for a more targeted control. Furthermore, the persistence during food processing and storage may be attributed to strong resistance of Cronobacter spp. to environment stresses such as heat, pH, and desiccation. There are many factors that support the survival of Cronobacter spp. in harsh environments, such as some genes, regulatory systems, and biofilms. Advanced detection technology is helpful for the strict monitoring of Cronobacter spp. In addition to the traditional heat treatment, many new control techniques have been developed, and the ability to control Cronobacter spp. has been demonstrated. The control of this bacteria is required not only during manufacture, but also through the selection of packaging methods to reduce postprocessing contamination. At the same time, the effect of inactivation methods on product quality and safety must be considered. This review considers the advances in our understanding of environmental stress response in Cronobacter spp. with special emphasis on its implications in food processing.

What Can Electrochemical Methods Offer in Determining DNA-Drug Interactions?

The interactions of compounds with DNA have been studied since the recognition of the role of nucleic acid in organisms. The design of molecules which specifically interact with DNA sequences allows for the control of the gene expression. Determining the type and strength of such interaction is an indispensable element of pharmaceutical studies. Cognition of the therapeutic action mechanisms is particularly important for designing new drugs. Owing to their sensitivity, simplicity, and low costs, electrochemical methods are increasingly used for this type of research. Compared to other techniques, they require a small number of samples and are characterized by a high reliability. These methods can provide information about the type of interaction and the binding strength, as well as the damage caused by biologically active molecules targeting the cellular DNA. This review paper summarizes the various electrochemical approaches used for the study of the interactions between pharmaceuticals and DNA. The main focus is on the papers from the last decade, with particular attention on the voltammetric techniques. The most preferred experimental approaches, the electrode materials and the new methods of modification are presented. The data on the detection ranges, the binding modes and the binding constant values of pharmaceuticals are summarized. Both the importance of the presented research and the importance of future prospects are discussed.

Ruthenium-based Photoactive Metalloantibiotics†

Antibiotic resistance is one of the world's most urgent public health problems. Antimicrobial photodynamic therapy (aPDT) is a promising therapy to combat the growing threat of antibiotic resistance. The aPDT combines a photosensitizer and light to generate reactive oxygen species to induce bacterial inactivation. Ruthenium polypyridyl complexes are significant because they possess unique photophysical properties that allow them to produce reactive oxygen species upon photoirradiation, which leads to cytotoxicity. These antimicrobial agents cause bacterial cell death by DNA and cytoplasmic membrane damage. This article presents a comprehensive review of photoactive antimicrobial properties of kinetically inert and labile ruthenium complexes, nanoparticles coupled photoactive ruthenium complexes, and photoactive ruthenium nanoparticles. Additionally, limitations of current ruthenium-based photoactive antimicrobial agents and future directions for the development of antibiotic-resistant photoactive antimicrobial agents are discussed. It is important to raise awareness for the ruthenium-based aPDT agents in order to develop a new class of photoactive metalloantibiotics capable of combating antibiotic resistance.

Synthesis, Characterization, and Antibacterial Evaluation of Heteroleptic Oxytetracycline-Salicylaldehyde Complexes

A new series of mixed ligand complexes of Cd(II) and Mo(V) were successfully synthesized by refluxing the mixture solution of oxytetracycline hydrochloride (OTC.HCl) with an aqueous and alcoholic solution of metal (M = Cd(II) and Mo(V)) salts and an alcoholic solution of salicylaldehyde (Sal). The complexes were characterized by modern analytical and spectral methods such as elemental microanalysis, pH, conductivity, surface tension, viscosity, melting point, and spectral methods such as FT-IR, NMR, electronic absorption, SEM, and mass spectrometry. Conductivity measurements of the complexes revealed their electrolytic nature. The kinetic and thermal stabilities were investigated using thermogravimetric and differential thermal analysis techniques. Thermodynamic and kinetic parameters such as E∗, ΔH∗, ΔS∗, and ΔG∗ were calculated from TG curves using the Coats–Redfern method. Geometry optimization of the proposed structure of the complexes was achieved by running MM2 calculations in a Gaussian-supported CS ChemOffice 3D Pro.12.0 version software. The final optimized geometrical energies for respective Cd-OTC/Sal and Mo-OTC/Sal complexes were found to be 923.1740 and 899.3184 kcal/mol. The electronic absorption spectral study revealed a tetrahedral geometry for the Cd-OTC/Sal complex and octahedral geometry for the Mo-OTC/Sal complex. The antibacterial sensitivity of the complexes was evaluated against three bacterial pathogens such as S. aureus, E. coli, and P. mirabilis using the modified Kirby–Bauer paper disc diffusion method. The antibacterial study revealed significant growth inhibitory action of the complexes.