Nanozymes based on metal-organic frameworks: Construction and prospects

Doughnut-shaped bimetallic Cu-Zn-MOF with peroxidase-like activity for colorimetric detection of glucose and antibacterial applications

Metal-organic frameworks (MOFs), especially bimetallic MOFs, have attracted widespread attention for simulating the structure and function of natural enzymes. In this study, different morphologies of bimetallic Cu-Zn-MOF with different peroxidase (POD)-like activities were prepared by simply controlling the molar ratio of Cu2+ and Zn2+. Among them, the doughnut-shaped Cu9-Zn1-MOF exhibited the largest POD-like activity. Cu9-Zn1-MOF was combined with glucose oxidase to construct a sensitive and selective glucose colorimetric biosensor with a linear detection range of 10-300 μM and a detection limit of 7.1 μm. Furthermore, Cu9-Zn1-MOF can efficiently convert hydrogen peroxide (H2O2) into hydroxyl radicals that effectively kill both gram-negative and gram-positive bacteria at low H2O2 level. The results of this study may promote the synthesis of bimetallic MOFs and broaden their applications in the biomedical field.

pH-Responsive injectable self-healing hydrogels loading Au nanoparticles-decorated bimetallic organic frameworks for synergistic sonodynamic-chemodynamic-starvation-chemo therapy of cancer

A novel and efficient cancer therapy was developed using a smart hydrogel containing multifunctional bimetallic organic frameworks and anticancer drugs. The injectable self-healing hydrogel with pH-responsiveness was constructed through borate ester and imine bonds among dopamine-grafted sodium alginate (SADA), hydroxypropyl chitosan (HPCS) and 2-formylphenylboronic acid (2-FPBA). The Au nanoparticles-decorated Ti/Fe bimetallic organic framework tetragonal nanosheets (Au/TF-MOF TNS) were synthesized and incorporated into the hydrogel with the anticancer drugs doxorubicin (DOX). Upon intratumoral injection of nanocomposite hydrogel, the acidic tumor microenvironment triggered the cleavage of borate ester and imine bonds, causing the hydrogel to break down and accelerating the release of both Au/TF-MOF TNS and DOX. These Au/TF-MOF TNS functioned as nanozymes, producing hydroxyl radicals (·OH) for chemodynamic therapy (CDT), generating oxygen (O2) to support sonodynamic therapy (SDT), and depleting glucose for starvation therapy (ST). Additionally, the Au/TF-MOF TNS served as sonosensitizers, capable of converting O2 into singlet oxygen (1O2) upon ultrasound irradiation to achieve SDT. Therefore, this nanocomposite hydrogel system enabled synergistic sonodynamic-chemodynamic-starvation-chemo therapy (SDT-CDT-ST-CT) of cancer, presenting a promising platform for advanced cancer therapy strategies.

Bioactive Metal-Organic Frameworks as a Distinctive Platform to Diagnosis and Treat Vascular Diseases

Vascular diseases (VDs) pose the leading threat worldwide due to high morbidity and mortality. The detection of VDs is commonly dependent on individual signs, which limits the accuracy and timeliness of therapies, especially for asymptomatic patients in clinical management. Therefore, more effective early diagnosis and lesion-targeted treatments remain a pressing clinical need. Metal-organic frameworks (MOFs) are porous crystalline materials formed by the coordination of inorganic metal ions and organic ligands. Due to their unique high specific surface area, structural flexibility, and functional versatility, MOFs are recognized as highly promising candidates for diagnostic and therapeutic applications in the field of VDs. In this review, the potential of MOFs to act as biosensors, contrast agents, artificial nanozymes, and multifunctional therapeutic agents in the diagnosis and treatment of VDs from the clinical perspective, highlighting the integration between clinical methods with MOFs is generalized. At the same time, multidisciplinary cooperation from chemistry, physics, biology, and medicine to promote the substantial commercial transformation of MOFs in tackling VDs is called for.

Colorimetric Immunoassays with Boronic Acid-Decorated, Peroxidase-like Metal-Organic Frameworks as the Carriers of Antibodies and Enzymes

The sensitivity of immunoassays is generally limited by the low signal reporter/recognition element ratio. Nanomaterials serving as the carriers can enhance the loading number of signal reporters, thus improving the detection sensitivity. However, the general immobilization strategies, including direct physical adsorption and covalent coupling, may cause the random orientation and conformational change in proteins, partially or completely suppressing the enzymatic activity and the molecular recognition ability. In this work, we proposed a strategy to load recognition elements of antibodies and enzyme labels using boronic acid-modified metal-organic frameworks (MOFs) as the nanocarriers for signal amplification. The conjugation strategy was proposed based on the boronate ester interactions between the carbohydrate moieties in antibodies and enzymes and the boronic acid moieties on MOFs. Both enzymes and MOFs could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H2O2, therefore achieving dual signal amplification. To indicate the feasibility and sensitivity of the strategy, colorimetric immunoassays of prostate specific antigen (PSA) were performed with boronic acid-modified Cu-MOFs as peroxidase mimics to catalyze TMB oxidation and nanocarriers to load antibody and enzyme (horseradish peroxidase, HRP). According to the change in the absorbance intensity of the oxidized TMB (oxTMB), PSA at the concentration range of 1~250 pg/mL could be readily determined. In addition, this work presented a site-specific and oriented conjugation strategy for the modification of nanolabels with recognition elements and signal reporters, which should be valuable for the design of novel biosensors with high sensitivity and selectivity.

Multi-Enzyme Activity of MIL-101 (Fe)-Derived Cascade Nano-Enzymes for Antitumor and Antimicrobial Therapy

The clinical application of oncology therapy is hampered by high glutathione concentrations, hypoxia, and inefficient activation of cell death mechanisms in cancer cells. In this study, Fe and Mo bimetallic sulfide nanomaterial (FeS2@MoS2) based on metal-organic framework structure is rationally prepared with peroxidase (POD)-, catalase (CAT)-, superoxide dismutase (SOD)-like activities and glutathione depletion ability, which can confer versatility for treating tumors and mending wounds. In the lesion area, FeS2@MoS2 with SOD-like activity can facilitate the transformation of superoxide anions (O2 -) to hydrogen peroxide (H2O2), and then the resulting H2O2 serves as a substrate for the Fenton reaction with FMS to produce highly toxic hydroxyl radicals (∙OH). Simultaneously, FeS2@MoS2 has an ability to deplete glutathione (GSH) and catalyze the decomposition of nicotinamide adenine dinucleotide phosphate (NADPH) to curb the regeneration of GSH from the source. Thus it can realize effective tumor elimination through synergistic apoptosis-ferroptosis strategy. Based on the alteration of the H2O2 system, free radical production, glutathione depletion and the alleviation of hypoxia in the tumor microenvironment, FeS2@MoS2 NPS can not only significantly inhibit tumors in vivo and in vitro, but also inhibit multidrug-resistant bacteria and hasten wound healing. It may open the door to the development of cascade nanoplatforms for effective tumor treatment and overcoming wound infection.

Facile colorimetric sensor using oxidase-like activity of octahedral Ag2O particles for highly selective detection of Pb(II) in water

Pb(II) is a prevalent heavy metal ion classified as a 2B carcinogen. Excessive intake of Pb(II) in the human body can damage the central nervous system, kidneys, liver, and immune system, leading to permanent brain damage, anemia, and cancer. Colorimetry can be applied to rapidly determine Pb(II) residues, but there are still many challenges in the accuracy and sensitivity of detection. Based on the inhibitory impact of Pb(II) on the oxidase-like activity of octahedral silver oxide (Ag2O), a colorimetric sensor with smartphone-assisted analysis for the Pb(II) detection was first developed. Herein, it has been found that Pb(II) can adsorb onto the surface of octahedral Ag2O, hindering the production of O2- in the reaction system. This ultimately results in the suppression of oxidase-like activity, leading to a lighter purple appearance of the colorimetric reaction solution. The sensor exhibits a high degree of sensitivity and a limit of detection (LOD) for Pb(II) was calculated as 2.2 μg L-1. Hence, the developed colorimetric sensor with high sensitivity, excellent specificity, and high tolerance to sodium ions is hopeful to have practical applications in Pb(II) detection in environmental water samples. Moreover, the sensor will provide a novel strategy for heavy metal ion detection and other substances.

Recent Progress and Prospect of Metal-Organic Framework-Based Nanozymes in Biomedical Application

A nanozyme is a nanoscale material having enzyme-like properties. It exhibits several superior properties, including low preparation cost, robust catalytic activity, and long-term storage at ambient temperatures. Moreover, high stability enables repetitive use in multiple catalytic reactions. Hence, it is considered a potential replacement for natural enzymes. Enormous research interest in nanozymes in the past two decades has made it imperative to look for better enzyme-mimicking materials for biomedical applications. Given this, research on metal-organic frameworks (MOFs) as a potential nanozyme material has gained momentum. MOFs are advanced hybrid materials made of inorganic metal ions and organic ligands. Their distinct composition, adaptable pore size, structural diversity, and ease in the tunability of physicochemical properties enable MOFs to mimic enzyme-like activities and act as promising nanozyme candidates. This review aims to discuss recent advances in the development of MOF-based nanozymes (MOF-NZs) and highlight their applications in the field of biomedicine. Firstly, different enzyme-mimetic activities exhibited by MOFs are discussed, and insights are given into various strategies to achieve them. Modification and functionalization strategies are deliberated to obtain MOF-NZs with enhanced catalytic activity. Subsequently, applications of MOF-NZs in the biosensing and therapeutics domain are discussed. Finally, the review is concluded by giving insights into the challenges encountered with MOF-NZs and possible directions to overcome them in the future. With this review, we aim to encourage consolidated efforts across enzyme engineering, nanotechnology, materials science, and biomedicine disciplines to inspire exciting innovations in this emerging yet promising field.

WO3 nanosheets with peroxidase-like activity and carbon dots based ratiometric fluorescent strategy for xanthine oxidase activity sensing and inhibitor screening

The abnormal level of xanthine oxidase (XOD) often causes pathological changes, which are related to a series of diseases. Herein, a novel and sensitive ratiometric fluorescent sensing platform based on WO3 nanosheets and carbon dots (CDs) was constructed to detect XOD activity for the first time. Under the catalytic oxidation of xanthine by XOD, hydrogen peroxide (H2O2) was generated. In the presence of H2O2, WO3 nanosheets were able to catalyze the oxidation of o-phenylenediamine to generate 2,3-diaminophenazine (DAP) with a yellow fluorescence signal at 570 nm due to its great peroxidase-like activity. The oxidation product DAP was capable of quenching the fluorescence of CDs at 430 nm through the inner filter effect. Therefore, the fluorescence intensity ratio F570/F430 can be used for quantitative analysis of XOD activity. This assay displayed good linear relationships in the range of 0.005-0.05 U/L and 0.5-40 U/L with a detection limit of 0.002 U/L. In addition, this ratiometric fluorescent sensing platform was successfully applied to the determination of XOD in human serum samples and XOD inhibitor screening, demonstrating significant potential in disease diagnosis and drug-screening applications.

Hydrolytic nanozymes: Preparation, properties, and applications

Hydrolytic nanozymes, as promising alternatives to hydrolytic enzymes, can efficiently catalyze the hydrolysis reactions and overcome the operating window limitations of natural enzymes. Moreover, they exhibit several merits such as relatively low cost, easier recovery and reuse, improved operating stability, and adjustable catalytic properties. Consequently, they have found relevance in practical applications such as organic synthesis, chemical weapon degradation, and biosensing. In this review, we highlight recent works addressing the broad topic of the development of hydrolytic nanozymes. We review the preparation, properties, and applications of six types of hydrolytic nanozymes, including AuNP-based nanozymes, polymeric nanozymes, surfactant assemblies, peptide assemblies, metal and metal oxide nanoparticles, and MOFs. Last, we discuss the remaining challenges and future directions. This review will stimulate the development and application of hydrolytic nanozymes.

Amorphous copper(II)-cyanoimidazole frameworks as peroxidase mimics for hydrogen sulfide assay

Metal-organic frameworks with hierarchical porosities and exposed active sites are promising for ideal enzyme mimics. In this work, we developed a simple and feasible air oxidation strategy to prepare amorphous Cu(II)-cyanoimidazole frameworks (aCu(II)-CIFs) using CuI as the metal source in dimethylsulfoxide. Benefiting from coordination unsaturation and hierarchical porosities, aCu(II)-CIFs exhibit inherent peroxidase-mimic activity for rapid colorimetric reaction of 3,3',5,5'-tetramethylbenzidine (TMB). aCu(II)-CIFs were utilized to develop a colorimetric platform for specific H2S assay in the range of 0.6-30 μM, achieving a limit of detection (LOD) of 0.071 μM. Structural collapse of aCu(II)-CIFs and subsequent generation of stable CuS particles, along with reducibility of H2S, are likely responsible for suppressing TMBox conversion. The proposed method successfully detected H2S in real water samples, with a relative standard deviation (RSD) lower than 8.4%. This contribution is expected to offer unique insights into the amorphization mechanisms of MOFs and their potential applications.

Metal Site and Size-Controlled BTC-Based MOF as Cysteine Oxidase Mimic for Self-Cascade Detection of Cysteine and Hg2

Nanozyme-mediated strategy for sensing has been widely applied nowadays, in which the construction of a nanozyme cascade platform is an effective and challenging method to simulate the complexity and multifunctionality of natural systems. Herein, a simple and convenient self-cascade sensing platform was developed for the fluorescent detection of cysteine and Hg2+ by a BTC-based MOF through screening the metal sites and crystal sizes. By the introduction of polyvinylpyrrolidone, the as-prepared Cu-BTC possessed a metal center of Cu2+ and smaller size, which exhibited both cysteine oxidase- and peroxidase-like activities. The dual enzymic characters of Cu-BTC made a self-cascade reaction occur during which cysteine was first oxidized to cystine and generated H2O2 in the presence of O2, then H2O2 was decomposed into ·OH, and finally the ·OH triggered the turn-on fluorescence of Cu-BTC. Based on the self-cascade reactions and high affinity of Hg2+ and -SH within cysteine, a fluorescent method was developed to detect cysteine and Hg2+ with a range of 0-160/0-15 μM and a limit of detection of 0.04/0.09 μM, respectively. This work reveals the important role of the Cu2+ center for mimicking cysteine oxidase and gives a feasible strategy for constructing simple self-cascade reactions.

Exploring the potential of iron-based metal-organic frameworks as peroxidase nanozymes for glucose detection with various secondary building units

Finding materials in biosensing that balance enzyme-like reactivity, stability, and affordability is essential for the future. Because of their unique peroxidase properties, including variable pore size, surface area, and Lewis acid active sites, iron-based metal-organic frameworks (MOFs) have evolved as viable possibilities. In this study, we constructed a Fe-MOF and tested its peroxidase-like activity and responsiveness toward H2O2 colorimetric techniques. Using encapsulation, we incorporated glucose oxidase into the ZIF-90 PVP MOF and conducted a sequential reaction with the Fe-MOF to detect glucose. The results showed better peroxidase catalytic activity of the MIL-88B(Fe) (1,4-NDC) MOF and similar secondary building unit (SBU) Fe-MOFs were studied in other peroxidase nanozyme studies. When combined with an enzyme-encapsulating ZIF-90 PVP MOF, they could be sequentially employed for glucose detection purposes. This study highlights the potential of nanozymes as an alternative to natural enzymes, with promising applications in biosensing and beyond.

Secondary metal doped cuprous-cyanoimidazole frameworks for triple-mode detection of dopamine

BACKGROUNDS

Metal-organic framework-based nanozymes enable several opportunities for designing novel analysis methods for the detection of pesticides, heavy metal ions, and biomolecules; however, practical applications are still limited by a complicated synthesis route, lower catalytic activity, and single detection mode. Dopamine (DA) is a crucial catecholamine substance in the human body that acts as a neurotransmitter regulating a variety of physiological functions of the central nervous system. Therefore, it is highly significant to explore simple nanozymes synthesis methods for constructing a multiple analysis system to detection DA.

RESULTS

Herein, we elaborately selected cobalt ions as the secondary metal doping in cuprous-cyanoimidazole frameworks (CuCo-CIFs) with a mass-production strategy. CuCo-CIFs possess intrinsic peroxidase-like activity that can convert hydrogen peroxide into various reactive oxygen species (i.e., 1O2, OH·, O2·-) and thereby oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) and DA to blue oxTMB and orange polydopamine (PDA), respectively. The absorption of the detection system increases at 460 nm while decreases at 652 nm as the concentration of DA increases under near-neutral pH (6.1), resulting in a color transition from blue to orange. Consequently, an unprecedented triple-mode analysis system of DA monitored by naked eyes, ratiometric-absorption, and scanometric was constructed. The limit of detection for the ratiometric-absorption and scanometric mode can reach 20 nM and 28 nM, respectively. CuCo-CIFs were successfully used for the rapid and accurate detection of DA in practical samples.

SIGNIFICANCE

As a simple, low-cost, multi-mode colorimetric platform, this kind of nanozyme detection with peroxidase-like activity exhibits significant potential for the detection of DA. Our work not only expands the applications of MOFs in analytical fields but also addresses the general challenges faced by nanozyme-based colorimetric detection systems of DA. This work provides valuable insights for the rational application of nanozyme and the design of new analysis systems.

Introducing Mn into ZIF-8 nanozyme for enhancing its catalytic activities and adding specific recognizer for detection of organophosphorus pesticides

In order to design and establish a highly efficient and selective nanozyme-based sensing platform for the UV-vis detection of organophosphorus pesticides (OPs), Mn was introduced into ZIF-8 nanozyme for enhancing its catalytic activities and adding specific recognizer. The Mn-doped ZIF-8 (Mn-ZIF-8) nanocomposites were synthesized with a very facile one-pot method by heating the mixture of ZnO, 2-methylimidazole (Hmin) and Mn(CH3COO)2·4H2O in a solvent-free system at 180 °C for 8 h. The Mn-ZIF-8 nanocomposite showed a higher peroxidase activity and an additional thiocholine (TCh)-degradable property compared to the pristine ZIF-8. OPs could inhibit acetylcholinesterase (AChE) to catalyze the hydrolysis of acetylthiocholine (ATCh) to produce TCh, thus blocking the degradation of Mn-ZIF-8 and protecting the catalysis of the oxidation of colorless 3,3',5,5'-tetramethylbenzydine (TMB) to blue oxidized TMB (ox-TMB). Accordingly, a detection method for OPs with high sensitivity and selectivity was designed and established on the basis of the Mn-ZIF-8 nanozyme with a linear range of 0.1-20 nM and a limit of detection (LOD) as low as 54 pM.

Exceptional peroxidase-like activity of an iron and copper based organic framework nanosheet for consecutive colorimetric biosensing of glucose and kanamycin in real food samples

Two-dimensional metal-organic framework nanosheets are attractive as peroxidase mimicking nanocatalysts due to their rich chemical functional groups, large surface area, high porosity, and accessible active sites. In this study, we synthesized FeCu bifunctional 2D MOF nanosheets using a solvothermal method. Fe and Cu ions were added as metal precursors, while organic amine and acid served as the organic ligands to construct the FeCu-MOF nanosheets. These nanosheets demonstrated robust peroxidase-like catalytic activities and were employed to develop a visual detection system for multiple targets, such as glucose and kanamycin. In the detection mechanism, glucose was oxidized into gluconic acid by glucose oxidase (GOx), leading to the generation of H2O2. When H2O2 is present, the FeCu-MOF NSs demonstrate high intrinsic peroxidase-like activity, which might catalytically oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into a blue-coloured oxTMB product with a strong UV absorption at 654 nm. Subsequently, kanamycin was added to the above sensing system. The kanamycin strongly interacted with the FeCu-MOF NSs through H-bonding and blocked electron transfer, resulting in a colour change of the solution from blue to colourless with a weak UV absorption at 654 nm. Under the optimal conditions, the proposed colorimetric sensor exhibits an excellent linear response to glucose and kanamycin over the 0.25-5 μM and 0.02-0.1 μM ranges, respectively. The proposed colorimetric assay detection limits for glucose and kanamycin were found to be as low as 0.1 μM and 8 nM, respectively, and such a sensor shows excellent selectivity and sensitivity against different potential interferents. Thus, our proposed colorimetric assay was satisfactory when applied to glucose and kanamycin detection in agricultural and livestock husbandry samples.

Hierarchically Structured and Highly Dispersible MOF Nanozymes Combining Self-Assembly and Biomineralization for Sensitive and Persistent Chemiluminescence Immunoassay

Metal-organic frameworks (MOF) are promising candidates for the construction of artificial nanozymes and have found applications in many fields. However, the preparation of nanosized MOF materials with high performance and good dispersibility is still a big challenge and is in great demand as signal labels for immunoassays. In this work, hierarchically structured and highly dispersible MOF nanoparticles were facilely prepared in a one-pot method. Self-assembled micelles from PEGylated hematin were used as structured templates to mediate the formation of zeolitic imidazole framework-8 (ZIF-8) nanoparticles in aqueous solution. The encapsulation of micelles in ZIF-8 frameworks produces well-dispersed nanoparticles and generates dual-confinement effects for catalytic hematin. Owing to the hierarchical structures, the formed MOF nanozymes show enhanced peroxidase-like activity and enable persistent chemiluminescence behaviors for the luminol system. Sandwich-type chemiluminescence immunoassays for carcinoembryonic antigen (CEA) were proposed using MOF nanozymes as signal labels, and good analytical performances were achieved. The combination of self-assembly and biomineralization may open new avenues for the development of MOF nanomaterials.

Portable Biosensor with Bimetallic Metal-Organic Frameworks for Visual Detection and Elimination of Bacteria

A multifunctional platform that meets the demands of both bacterial detection and elimination is urgently needed because of their harm to human health. Herein, a "sense-and-treat" biosensor was developed by using immunomagnetic beads (IMBs) and AgPt nanoparticle-decorated PCN-223-Fe (AgPt/PCN-223-Fe, PCN stands for porous coordination network) metal-organic frameworks (MOFs). The synthesized AgPt/PCN-223-Fe not only exhibited excellent peroxidase-like activity but also could efficiently kill bacteria under near infrared (NIR) irradiation. This biosensor enabled the colorimetric detection of E. coli O157:H7 in the range of 103-108 CFU/mL with a limit of detection of 276 CFU/mL, accompanied with high selectivity, good reproducibility, and wide applicability in diverse real samples. Furthermore, the biosensor possessed a highly effective antibacterial rate of 99.94% against E. coli O157:H7 under 808 nm light irradiation for 20 min. This strategy can provide a reference for the design of novel versatile biosensors for bacterial discrimination and antibacterial applications.

CeO2-Based Porous Carbonaceous Frameworks as Antioxidant Nanozymes for Scavenging Reactive Oxygen Species and Adsorbing Benzo[a]pyrene

Barbecue smoke, car exhaust, cigarette smoke, and other waste gases contain toxic reactive oxygen species (ROS) and polycyclic aromatic hydrocarbons (PAHs). Herein, CeO2-based porous carbonaceous frameworks (CeO2 PCFs) were explored as antioxidant nanozymes to scavenge ROS and absorb benzo[a]pyrene (B[a]P). Using cerium-based frameworks as the precursors, CeO2 PCFs were constructed by high-temperature calcination. Due to excellent superoxide dismutase-like and catalase-like activity, CeO2 PCFs could effectively eliminate superoxide radical, hydroxyl radical, and hydrogen peroxide. The 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) free radical scavenging assay had substantiated free radical scavenging ability of CeO2 PCFs. In addition, with a large surface area and porous structure, CeO2 PCFs could adsorb B[a]P efficiently. The designed CeO2 PCFs may provide a new opportunity as scavengers of ROS and absorbents of PAHs in some harmful gases.

Advances in the application of metal-organic framework nanozymes in colorimetric sensing of heavy metal ions

Nanozymes, which can be defined as nanomaterials with excellent catalytic function, are well known to the scientific community due to their distinct merits, such as low cost and high stability, which render them preferable to natural enzymes. As porous organic-inorganic coordination materials, metal-organic frameworks (MOFs) possess a large number of active sites and thus can effectively mimic the properties of natural enzymes. Recently, MOF-based nanozymes have also exhibited good application potential for the analysis of heavy metal ions. In comparison to the traditional detection methods for heavy metal ions, nanozyme-based colorimetric sensing permits intuitive visual analysis by using relatively simple instruments, facilitating rapid and simple on-site screening. In this minireview, the preparation of MOF-based nanozymes and the different nanozyme activity types are briefly described, such as peroxidase-like and oxidase-like, and the relevant catalytic mechanisms are elaborated. Based on this, different response mechanisms of MOF-based colorimetric methods to heavy metal ions, such as turn-off, turn-on, and turn-off-on, are discussed. In addition, the colorimetric sensing applications of MOF-based nanozymes for the detection of heavy metal ions are summarized. Finally, the current research status of MOF-based nanozymes and the future development direction are discussed.

Atomically Fe-anchored MOF-on-MOF nanozyme with differential signal amplification for ultrasensitive cathodic electrochemiluminescence immunoassay

The successful application of electrochemiluminescence (ECL) in immunoassays for clinical diagnosis requires stable electrodes and high-efficient ECL signal amplification strategies. Herein, the authors discovered a new class of atomically dispersed peroxidase-like nanozymes with multiple active sites (CoNi-MOF@PCN-224/Fe), which significantly improved the catalytic performance and uncovered the underlying mechanism. Experimental studies and theoretical calculation results revealed that the nanozyme introduced a Fenton-like reaction into the catalytic system and the crucial synergistic effects of definite active moieties endow CoNi-MOF@PCN-224/Fe strong electron-withdrawing effect and low thermodynamic activation energy toward H2O2. Benefiting from the high peroxidase-like activity of the hybrid system, the resultant ECL electrode exhibited superior catalytic activity in the luminol-H2O2 system and resulted in an ≈17-fold increase in the ECL intensity. In addition, plasmonic Ag/Au core-satellite nanocubes (Ag/AuNCs) were designed as high-efficient co-reactant quenchers to improve the performance of the ECL immunoassay. On the basis of the differential signal amplification strategy (DSAS) proposed, the immunoassay displayed superior detection ability, with a low limit of detection (LOD) of 0.13 pg mL-1 for prostate-specific antigen (PSA). The designed atomically anchored MOF-on-MOF nanozyme and DSAS strategy provides more possibilities for the ultrasensitive detection of disease markers in clinical diagnosis.

Metal-organic framework (MOF) hybridized gold nanoparticles as a bifunctional nanozyme for glucose sensing

Inspired by natural enzymes that possess multiple catalytic activities, here we develop a bifunctional metal-organic frame-work (MOF) for biosensing applications. Ultrasmall gold nano-particles (AuNPs) are grown in the internal cavities of an iron (Fe) porphyrin-based MOF to produce a hybridized nanozyme, AuNPs@PCN-224(Fe), in which AuNPs and PCN-224(Fe) exhibit the catalytic activity of glucose oxidase (GOx) and horseradish peroxidase (HRP), respectively. We established that the bifunctional nanozyme was capable of a cascade reaction to generate hydrogen peroxide in the presence of d-glucose and oxygen in situ, and subsequently activate a colorimetric or chemiluminescent substrate through HRP-mimicking catalytic activity. The nanozyme was selective over a range of other saccharides, and 93% of the catalytic activity was retained after being recycled five times.

The development of a novel copper-loaded mesoporous silica nanoparticle as a peroxidase mimetic for colorimetric biosensing and its application in H2O2 and GSH assay

In recent years, the development of nanomaterials-based peroxidase mimics as enzyme sensors has been attracting considerable interest due to their outstanding features, including potent stability, and cost-effectiveness toward natural enzymes. In this work, mesoporous silica nanoparticles functionalized by copper (Cu-MSN) were prepared as a new artificial enzyme for the first time through the sol-gel procedure. A comprehensive investigation of the catalytic activity of Cu-MSN was done through the oxidation of chromogenic peroxidase substrates, 3,3',5,5'-tetramethylbenzidine (TMB), and (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), in the presence of H₂O₂. The results indicate that the peroxidase-like activity of the as-prepared sample is significantly higher than other nanoparticles. Additionally, for the study, a facile and rapid sensing method based on the enzyme-like activity of Cu-MSN to detect H₂O₂ and glutathione (GSH) was developed to examine the potency of the proposed biosensor. Preliminary analysis revealed that the limit of detection (LOD) of H₂O₂ and GSH is 0.2 and 0.0126 μM, in the range of 0.9-100 and 0.042-1 μM, respectively. These findings support the claims for the efficiency of the sensor in detection fields. Also, human serum was utilized as the real sample to obtain additional evidence.

ROS-scavenging biomaterials for periodontitis

Periodontitis is defined as a chronic inflammatory disease in which the continuous activation of oxidative stress surpasses the reactive oxygen species (ROS) scavenging capacity of the endogenous antioxidative defense system. Studies have demonstrated that ROS-scavenging biomaterials should be promising candidates for periodontitis therapy. To benefit the understanding and design of scavenging biomaterials for periodontitis, this review details the relationship between ROS and periodontitis, including direct and indirect damage, the application of ROS-scavenging biomaterials in periodontitis, including organic and inorganic ROS-scavenging biomaterials, and the various dosage forms of fabricated materials currently used for periodontal therapy. Finally, the current situation and further prospects of ROS-scavenging biomaterials in periodontal applications are summarized. Expecting that improved ROS-scavenging biomaterials could be better designed and developed for periodontal and even clinical application.

MIL-101(CuFe) Nanozymes with Excellent Peroxidase-like Activity for Simple, Accurate, and Visual Naked-Eye Detection of SARS-CoV-2

The COVID-19 pandemic has spread to every corner of the world and seriously affected our health and daily activities in the past three years; thereby, it is still urgent to develop various simple, quick, and accurate methods for early detection of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) transmission. Nanozymes, a kind of nanomaterial with intrinsic enzyme-mimicking activity, have emerged as a suitable alternative for both therapy and diagnosis of SARS-CoV-2. Here, ultrasensitive and ultrafast MIL-101(CuFe)-CD147 biosensors are established for the detection of SARS-CoV-2 by a simple colorimetric method. A MIL-101(CuFe) metal-organic framework has excellent peroxidase-like activity due to the synergistic effect of Fe and Cu atoms. In addition, the MIL-101(CuFe)-CD147 biosensor shows great potential to detect the various variants of SARS-CoV-2 due to the universal receptor of CD147. The enzyme-based biosensor for the detection of SARS-CoV-2 achieves a very low limit of detection (about 3 PFU/mL) within 30 min. Therefore, the present method provides a new generation of an alternative approach for highly sensitive and visual diagnosis of COVID-19.

A novel liquid crystal resonance Rayleigh scattering spectral probe for determination of trace Cr6

Hexavalent chromium (Cr⁶⁺) has strong oxidizing property and toxicity. It has been identified as a carcinogen with obvious carcinogenic effect by the International Anti-cancer Research Center. Therefore, it has a great significance to establish a simple and sensitive method for Cr⁶⁺. In the solution, liquid crystal (LC) trans, trans-4-(3,4-difluorophenyl)-4'-n-pentylbicyclohexyl (DP) exhibits strong resonance Rayleigh scattering (RRS) effect due to formation DP nanoparticles. It was used firstly as nanoprobe, to establish a simple and sensitive RRS energy transfer (RRS-ET) method for the determination of trace Cr⁶⁺ in water samples. The Cr⁶⁺ reacts with diphenylcarbazide (DCB) to produce purple complex. It is adsorbed on the nanoprobe surface, the purple complex as energy receptor and DP as energy donor to produce RRS-ET phenomenon, to make the RRS signal of 370 nm decreasing. In the range of 3-30 nmol/L Cr⁶⁺, with the increase of concentration, the RRS signal decreased linearly at 370 nm, with a detection limit of 0.49 nmol/L. This new RRS-ET method was applied to the determination of Cr⁶⁺ in water samples, with recovery of 96.0-104.7% and the relative standard deviation (RSD) of 4.44-9.98%.

Recent Advances in Construction and Application of Metal-Nanozymes in Pharmaceutical Analysis

Nanozymes, made of emerging nanomaterials, have similar activity to natural enzyme and exhibit promising applications in in the fields of environment, biology and medicine, and food safety science. In recent years, with the deep finding and research to nanozymes by researchers, its application in field of pharmaceutical analysis has emerged gradually, possessing great significance in drug safety evaluation and quality control. This review summarizes the construction of metal nanozymes, strategies to improve their performance and their application in pharmaceutical detection and analysis, especially in detection of target analytes consisting of small molecule medicine macromolecule, toxic and others, which proposes theoretical foundation for development of nanozymes in this field. At the same time, it also provides opportunities and challenges for the construction and application of new nanozymes.

Design and Application of Electrochemical Sensors with Metal-Organic Frameworks as the Electrode Materials or Signal Tags

Metal-organic frameworks (MOFs) with fascinating chemical and physical properties have attracted immense interest from researchers regarding the construction of electrochemical sensors. In this work, we review the most recent advancements of MOF-based electrochemical sensors for the detection of electroactive small molecules and biological macromolecules (e.g., DNA, proteins, and enzymes). The types and functions of MOF-based nanomaterials in terms of the design of electrochemical sensors are also discussed. Furthermore, the limitations and challenges of MOF-based electrochemical sensing devices are explored. This work should be invaluable for the development of MOF-based advanced sensing platforms.

Advances in Nanomaterial-Based Biosensors for Determination of Glycated Hemoglobin

Diabetes is a major public health burden whose prevalence has been steadily increasing over the past decades. Glycated hemoglobin (HbA1c) is currently the gold standard for diagnostics and monitoring glycemic control in diabetes patients. HbA1c biosensors are often considered to be cost-effective alternatives for smaller testing laboratories or clinics unable to access other reference methods. Many of these sensors deploy nanomaterials as recognition elements, detection labels, and/or transducers for achieving sensitive and selective detection of HbA1c. Nanomaterials have emerged as important sensor components due to their excellent optical and electrical properties, tunable morphologies, and easy integration into multiple sensing platforms. In this review, we discuss the advantages of using nanomaterials to construct HbA1c sensors and various sensing strategies for HbA1c measurements. Key gaps between the current technologies with what is needed moving forward are also summarized.

Discovery of novel rost-4-ene derivatives as potential plant activators for preventing phytopathogenic bacterial infection: Design, synthesis and biological studies

BACKGROUND

Gradually aggravated disease caused by phytopathogenic bacteria severely restricts food security and crop yield, and few pesticides can relieve this severe situation. Thus, development and excavation of new agrochemicals with high bioactivity and novel action mechanism may be a feasible strategy to control intractable bacterial diseases. As a privileged molecular framework, steroid molecules exhibit diversiform bioactivities. Herein, a series of novel androst-4-ene derivatives were designed, synthesised and investigated for their antibacterial behaviour to excavate novel agrochemicals on the base of steroid molecules.

RESULTS

Bioassay results indicated that target compounds displayed high bioactivities toward three destructive phytopathogenic bacteria, including Xanthomonas oryzae pv. oryzae (Xoo), Xanthomonas axonopodis pv. citri (Xac) and Pseudomonas syringae pv. actinidiae (Psa). Compound III₁₉ displayed excellent in vitro antibacterial profiling (EC₅₀  = 2.37 mg L^-1 towards Xoo, EC₅₀  = 2.10 mg L^-1 towards Xac, EC₅₀  = 9.50 mg L^-1 towards Psa). Furthermore, compound III₁₉ showed outstanding in vivo protective activities, with values of 81.81% and 58.75% towards kiwifruit bacterial canker and rice bacterial leaf blight, respectively. Analysis of the antibacterial mechanism disclosed that compound III₁₉ enhanced host defence enzyme activities superoxide dismutase (SOD), peroxidase (POD), phenylalanine ammonia lyase (PAL), polyphenol oxidase (PPO), and catalase (CAT) and increased the salicylate synthase content to induce host resistance. In addition, compound III₁₉ increased the membrane permeability, destroyed the cell membrane and killed the bacteria.

CONCLUSION

Given these profiles of target compounds, we highlight a new strategy for controlling intractable plant bacterial diseases by inducing plant resistance and targeting the bacterial cell membrane. © 2022 Society of Chemical Industry.

Metal-organic frameworks with peroxidase-like activity for efficient removal of aflatoxin B1

Aflatoxin B₁ (AFB₁), a naturally produced toxin existing in major food crops, is highly toxic and carcinogenic to human and animals. In this study, a reusable material, Pd@PCN-222 with great adsorption performance and peroxidase-like activity was synthesized for the removal of AFB₁. Pd@PCN-222 exhibited great adsorption performance owing to hierarchical porous structure. Pd@PCN-222 also could catalyze the AFB₁ in the presence of H₂O₂ due to the Fe-tetrakis (4-carboxyphenyl) porphyrin and Pd as effective peroxidase active site, which improved the removal efficiency of AFB₁. Pd@PCN-222 was applied for the removal of AFB₁ with a removal rate of 96.52% in 2 h. Owing to the advantages of high removal efficiency and reusability, Pd@PCN-222 had great application potential in AFB₁ removal.

Catalase-integrated metal-organic framework with synergetic catalytic activity for colorimetric sensing

As a platform for enzyme immobilization, metal-organic frameworks (MOFs) can protect enzyme activity from the interference of external adverse environment. Although these strategies have been proven to produce good results, little consideration has been given to the functional similarity of MOFs to the encapsulated enzyme. Here, catalase (CAT) was encapsulated in Fe-BTC with peroxidase-like activity to obtain a stable composite (CAT@Fe-BTC) with synergistic catalytic activity. Depending on the superior selectivity and high catalytic activity of CAT@Fe-BTC, colorimetric sensing for the detection of hydrogen peroxide and phenol was developed. This work demonstrates that the integration of functional MOFs with natural enzyme can be well applied to the construction of efficient catalysts.

Single-Stranded DNA-Encoded Gold Nanoparticle Clusters as Programmable Enzyme Equivalents

Nanozymes have emerged as a class of novel catalytic nanomaterials that show great potential to substitute natural enzymes in various applications. Nevertheless, spatial organization of multiple subunits in a nanozyme to rationally engineer its catalytic properties remains to be a grand challenge. Here, we report a DNA-based approach to encode the organization of gold nanoparticle clusters (GNCs) for the construction of programmable enzyme equivalents (PEEs). We find that single-stranded (ss-) DNA scaffolds can self-fold into nanostructures with prescribed poly-adenine (polyA) loops and double-stranded stems and that the polyA loops serve as specific sites for seed-free nucleation and growth of GNCs with well-defined particle numbers and interparticle spaces. A spectrum of GNCs, ranging from oligomers with discrete particle numbers (2-4) to polymer-like chains, are in situ synthesized in this manner. The polymeric GNCs with multiple spatially organized nanoparticles as subunits show programmable peroxidase-like catalytic activity that can be tuned by the scaffold size and the inter-polyA spacer length. This study thus opens new routes to the rational design of nanozymes for various biological and biomedical applications.

Metal-organic framework as a mimetic enzyme with excellent adaptability for sensitive chemiluminescence detection of glutathione in cell lysate

A novel [Co(L)(H₂O)₂] (1) was obtained by hydrothermal method and it exhibited a 1D chain with exposed carboxyl groups, the unique coordination mode made it have unusual physical and chemical stability. Meanwhile, 1 showed peroxidase-like and weak oxidase-like activity. 1 as a peroxidase mimic enzyme had an excellent affinity for the substrates luminol and H₂O₂. Compared with HRP, 1 had catalytic activity in a wide pH range and showed the best catalytic activity at pH 7.4. Meanwhile, the catalysis process of 1 was reversible and recyclable, and the catalytic activity remained stable after different pH and temperatures and long-time storage. Based on the inhibition of glutathione on luminol-H₂O₂-MOF 1 chemiluminescence signal, a chemiluminescence method for the determination of glutathione has been proposed with high sensitivity and selectivity and had been applied for detecting glutathione in cell lysate with satisfactory results.

A Comprehensive Review on the Use of Metal–Organic Frameworks (MOFs) Coupled with Enzymes as Biosensors

Several studies have shown the development of electrochemical biosensors based on enzymes immobilized in metal–organic frameworks (MOFs). Although enzymes have unique properties, such as efficiency, selectivity, and environmental sustainability, when immobilized, these properties are improved, presenting significant potential for several biotechnological applications. Using MOFs as matrices for enzyme immobilization has been considered a promising strategy due to their many advantages compared to other supporting materials, such as larger surface areas, higher porosity rates, and better stability. Biosensors are analytical tools that use a bioactive element and a transducer for the detection/quantification of biochemical substances in the most varied applications and areas, in particular, food, agriculture, pharmaceutical, and medical. This review will present novel insights on the construction of biosensors with materials based on MOFs. Herein, we have been highlighted the use of MOF for biosensing for biomedical, food safety, and environmental monitoring areas. Additionally, different methods by which immobilizations are performed in MOFs and their main advantages and disadvantages are presented.

A two-dimensional thin Co-MOF nanosheet as a nanozyme with high oxidase-like activity for GSH detection

A two-dimensional thin Co-MOF (ZIF-67) nanosheet with high oxidase-like activity was applied for sensitive visual GSH detection.

Magnetic covalent organic framework immobilized gold nanoparticles with high-efficiency catalytic performance for chemiluminescent detection of pesticide triazophos

Covalent organic frameworks (COFs) are considered to be a promising support material for catalyst due to their highly ordered porous structure. Here, a core-shell structured Fe₃O₄ magnetic covalent organic framework (Fe₃O₄@COF) was synthesized and employed to provide basic sites for immobilization of gold nanoparticles (AuNPs). The AuNPs was in-situ immobilized on the shell of Fe₃O₄@COF via a citrate reducing method. The Fe₃O₄@COF-AuNP had convenient magnetic separability and exhibited excellent mimicking peroxidase-like activity in catalyzing chemiluminescence (CL) reaction of luminol with hydrogen peroxide (H₂O₂). With acetylcholine chloride (ACh) as substrate of acetylcholinesterase (AChE), a CL method was exploited for sensitive detection of organophosphorus pesticide triazophos due to its irreversible inhibiting effect on the AChE activity and subsequently influences the production of H₂O₂ under the condition of choline oxidase (ChOx). This method gave a good linearity for triazophos in the range of 5.0-300.0 nmol L^-1, and a limit of detection (LOD) of 1 nmol L^-1 was acquired. The applicability of this method was verified by the determination of triazophos in different spiked vegetable samples.

Ce-MOF with Intrinsic Haloperoxidase-Like Activity for Ratiometric Colorimetric Detection of Hydrogen Peroxide

Metal–organic framework (MOF) nanozymes, as emerging members of the nanozymes, have received more and more attention due to their composition and structural characteristics. In this work, we report that mixed-valence state Ce-MOF (MVCM) has intrinsic haloperoxidase-mimicking activity. MVCM was synthesized by partial oxidation method using Ce-MOF as a precursor. In the presence of H₂O₂ and Br⁻, MVCM can catalyze oxidative bromination of chromogenic substrate phenol red (PR) to produce the blue product bromophenol blue (Br₄PR), showing good haloperoxidase-like activity. Because of the special chromogenic substrate, we constructed a ratiometric colorimetric-sensing platform by detecting the absorbance of the MVCM-(PR, Br⁻) system at wavelengths of 590 and 430, for quantifying H₂O₂, where the detection limit of the H₂O₂ is 3.25 μM. In addition, the haloperoxidase-mimicking mechanism of the MVCM is proposed. Moreover, through enzyme kinetics monitoring, the K_m (H₂O₂ and NH₄Br) of the MVCM is lower than that of cerium oxide nanomaterials, indicating that the MVCM has a stronger binding affinity for H₂O₂ and NH₄Br than other materials. This work provides more application prospects for the development of nanozymes in the field of biosensors in the future.

Pt Nanoparticles Anchored on NH2-MIL-101 with Efficient Peroxidase-Like Activity for Colorimetric Detection of Dopamine

Dopamine (DA) is an important catecholamine neurotransmitter that plays a highly relevant role in regulating the central nervous system, and abnormal DA content can cause many immune-related diseases. Hence, it is of significance to sensitively and specifically identify DA for clinical medicine. In this work, Pt/NH2-MIL-101 hybrid nanozymes with bimetallic catalytic centers were fabricated by forming coordinate bonds between Pt nanoparticles (Pt NPs) and –NH2 on metal–organic frameworks (MOF). The catalytic activity of Pt/NH2-MIL-101 was increased by 1.5 times via enlarging the exposure of more active sites and improving the activity of the active sites through the strategy of forming bimetallic catalytic centers. In the presence of DA, competing with 3, 3′, 5, 5′-tetramethylbenzidine (TMB) for the generated hydroxyl radicals (•OH), the blue oxidation state TMB (Ox-TMB) is reduced to colorless TMB, showing dramatic color changes. The Pt/NH2-MIL-101-based colorimetric assay enables the sensitive and robust detection of DA molecules with a detection limit of only 0.42 μM and has an observable potential in clinical applications.

Tailoring metal-organic frameworks-based nanozymes for bacterial theranostics

Nanozymes are next-generation artificial enzymes having distinguished features such as cost-effective, enhanced surface area, and high stability. However, limited selectivity and moderate activity of nanozymes in the biochemical environment hindered their usage and encouraged researchers to seek alternative catalytic materials. Recently, metal-organic frameworks (MOFs) characterized by distinct crystalline porous structures with large surface area, tunable pores, and uniformly dispersed active sites emerged, that filled the gap between natural enzymes and nanozymes. Moreover, by selecting suitable metal ions and organic linkers, MOFs can be designed for effective bacterial theranostics. In this review, we briefly presented the design and fabrication of MOFs. Then, we demonstrated the applications of MOFs in bacterial theranostics and their safety considerations. Finally, we proposed the major obstacles and opportunities for further development in research on the interface of nanozymes and MOFs. We expect that MOFs based nanozymes with unique physicochemical and intrinsic enzyme-mimicking properties will gain broad interest in both fundamental research and biomedical applications.

Molybdenum disulfide-based materials with enzyme-like characteristics for biological applications

Nanozyme, a kind of nanomaterials with enzymatic activity, has been developing vigorously over the past years owing to its advantages such as low-cost, easy storage, ease of use in harsh environments and so on, compared with natural enzymes. At present, as a typical two-dimensional nanomaterial, molybdenum disulfide (MoS₂) and their hybrids with unexpected enzyme-like activities have caused wide attention. In this review, we mainly investigated the enzyme-like activities of MoS₂ based nanomaterials, including peroxidase-like activity, catalase-like activity and superoxide dismutase-like activity. Furthermore, we systematically introduce recent research progress of MoS₂ based nanomaterials in the fields of biological applications such as radiation protection, cancer therapy, antibacterial, and wound healing. Finally, the current challenges and perspectives of MoS₂ based nanomaterials in the future are also discussed and proposed. We expect this review may be significant to understand the properties of MoS₂ based nanomaterials and the development of two-dimensional nanomaterials with enzyme mimicking activities.