Recent advances in two-dimensional layered materials for photoelectrochemical sensing

Utilizing nanotechnology to boost the reliability and determine the vertical load capacity of pile assemblies

Because of their high electrocatalytic activity, sensitivity, selectivity, and long-term stability in electrochemical sensors and biosensors, numerous nanomaterials are being used as suitable electrode materials thanks to developments in nanotechnology. Electrochemical sensors and biosensors are two areas where two-dimensional layered materials (2DLMs) are finding increasing utility due to their unusual structure and physicochemical features. Nanosensors, by their unprecedented sensitivity and minute scale, can probe deeper into the structural integrity of piles, capturing intricacies that traditional tools overlook. These advanced devices detect anomalies, voids, and minute defects in the pile structure with unparalleled granularity. Their effectiveness lies in detection and their capacity to provide real-time feedback on pile health, heralding a shift from reactive to proactive maintenance methodologies. Harvesting data from these nanosensors, data was incorporated into a probabilistic model, executing the reliability index calculations through Monte Carlo simulations. Preliminary outcomes show a commendable enhancement in the predictability of vertical bearing capacity, with the coefficient of variation dwindling by up to 12%. The introduction of nanosensors facilitates instantaneous monitoring and fortifies the long-term stability of pile foundations. This study accentuates the transformative potential of nanosensors in geotechnical engineering.

Carbon-based photoelectrochemical sensors: recent developments and future prospects

Owing to the considerable potential of photoelectrochemical (PEC) sensors, they have gained significant attention in the analysis of biological, environmental, and food markers. However, the limited charge mass transfer efficiency and rapid recombination of electron hole pairs have become obstacles in the development of PEC sensors. In this case, considering the unique advantages of carbon-based materials, they can be used as photosensitizers, supporting materials and conductive substrates and coupled with semiconductors to prepare composite materials, solving the above problems. In addition, there are many types of carbon materials, which can have semiconductor properties and form heterojunctions after coupling with semiconductors, effectively promoting the separation of electron hole pairs. Herein, we aimed to provide a comprehensive analysis of reports on carbon-based PEC sensors by introducing their research and application status and discussing future development trends in this field. In particular, the types and performance improvement strategies of carbon-based electrodes and the working principles of carbon-based PEC sensors are explained. Furthermore, the applications of carbon-based photoelectric sensors in environmental monitoring, biomedicine, and food detection are highlighted. Finally, the current limitations in the research on carbon-based PEC sensors are emphasized and the need to enhance the sensitivity and selectivity through material modification, structural design, improved device performance, and other strategies are emphasized.

High-performance assaying cardiac troponin I using Bi-doped tin-based heterojunction in photoelectrochemical biosensing with the quencher of yolk-shell nanostructure

Cardiac troponin I (cTnI), a protein regulating myocardial contraction, stands the premier biomarker for diagnosing acute myocardial infarction and stratifying heart disease risk. Photoelectrochemical (PEC) biosensing combines traditional PEC analysis with high bioconjugation specificity, rendering a prospective avenue for disease biomarker analysis. However, the performance of sensors often falls short due to inadequate photoelectric materials. Hence, designing heterojunctions with proper band alignment, effective transport and separation of photogenerated carriers is highly expected for PEC sensors. Meanwhile, doping as a synergistic strategy to tune the energy band edges and improve carrier transport in heterojunctions, can also enhance the sensing performance. In this work, bismuth-doped tin oxide and tin disulfide heterojunction (Bi-SnOS) was prepared via a simple one-step hydrothermal method and utilized as a highly sensitive platform. Integrating copper sulfide-coated nano-gold (Au@CuS), a yolk-shell shaped nanocomposites, as the double quenching probe, an excellent PEC biosensor was fabricated to assay cTnI via sandwich immunorecognition. Under optimal conditions, the proposed biosensor displayed a high-performance for cTnI in the range from 0.1 pg/mL to 5.0 ng/mL with a low detection limit (44.7 fg/mL, 3σ). The strong photocurrent response, high stability and suitable selectivity point out that the synergistic effect between heterojunction and doping provides a promising prospect for the design of new PEC materials.

High-Throughput Multitarget Molecular Detection in an Automatic Light-Addressable Photoelectrochemical Sensing Platform

Successively emerged high-throughput multitarget molecular detection methods bring significant development tides in chemical, biological, and environmental fields. However, several persistent challenges of intricate sample preparation, expensive instruments, and tedious and skilled operations still need to be further addressed. Here, we propose an automatic light-addressable photoelectrochemical (ALA-PEC) sensing platform for sensitive and selective detection of multitarget molecules. With Au nanoparticle-decorated TiO2 nanotube photonic crystals (Au-TiO2 NTPCs) as a photoelectrode and 8 kinds of antibiotics as target molecules, the ALA-PEC sensing system implements automatic detection of multimolecules in a short time with high sensitivity and good selectivity. Random samples with different amounts of antibiotics have been well-distinguished in the ALA-PEC system, and both the chemical components and concentrations have been well-illustrated in a pattern recognition model. It is worth noting that 8 samples are not the limit of the ALA-PEC sensing platform, which can be easily expanded to more complex detection arrays based on practical needs. The emerging ALA-PEC sensing platform provides a new solution for rapid screening and detection of multitarget and high-throughput substances and potentially brings the automatic, portable, sensitive, high-throughput, and cost-effective detection technique to an entire new realm.

Cellulose acetate/MOF film-based colorimetric ammonia sensor for non-destructive remote monitoring of meat product spoilage

Herein, we designed an on-site and portable colorimetric assay using cellulose acetate polymeric films incorporated with HKUST-1 metal-organic framework while immersed in a solution of methyl red and brilliant cresyl blue organic dyes as an indicator for monitoring ammonia levels. Ammonia serves as a significant biomarker of food spoilage which falls under the category of volatile organic compounds (VOCs). The designed colorimetric solid-state sensor was comprehensively characterized using FE-SEM, EDS-mapping, XRD, FTIR, and contact angle analyses. The results confirmed the superior stability, water permeability, good crystallinity and desirable morphology of the prepared sensor platform. Additionally, customized smartphone was developed and applied for online signaling and colorimetric analysis. The findings demonstrated two linear ranges: 1-100 ppb and 0.1-1340 ppm with a detection limit of 0.02 ppm. The solid-state sensor exhibited high selectivity in the presence of other VOCs such as methanol, ethanol, acetone, 2-propanol, toluene, humidity, and hexane. It displayed acceptable repeatability in both inter-day (RSD = 3.38 %) and intraday (RSD = 3.86 %), long-term stability over 4 days as well as reusability over 3 cycles. We successfully applied this sensing platform for ammonia monitoring in spoiled meat foods including veal, fish and chicken. The results indicated favorable percentage recovery and repeatability, confirming the feasibility and potential applicability of this intelligent packaging system for monitoring freshness. The platform allows for real-time monitoring and data analysis via smartphone-based online signaling, providing a convenient and effective method for ensuring food quality.

Au/TiO2-based molecularly imprinted photoelectrochemical sensor for dibutyl phthalate detection

A photoelectrochemical molecular imprinting sensor based on Au/TiO₂ nanocomposite was constructed for the detection of dibutyl phthalate. Firstly, TiO₂ nanorods were grown on fluorine-doped tin oxide substrate by hydrothermal method. Then, gold nanoparticles were electrodeposited on TiO₂ to fabricate Au/TiO₂. Finally, molecular imprinted polymer was electropolymerized on the Au/TiO₂ surface to construct MIP/Au/TiO₂ PEC sensor for DBP. The conjugation effect of MIP accelerates the electron transfer between TiO₂ and MIP, which can greatly improve the photoelectric conversion efficiency and sensitivity of the sensor. In addition, MIP can also provide sites for highly selective recognition of dibutyl phthalate molecules. Under optimal experimental conditions, the prepared photoelectrochemical sensor was used for the quantitative determination of DBP and the results showed a wide linear range (50 to 500 nM), a low limit of detection (0.698 nM), and good selectivity. The sensor was used in a study of real water samples to show that it has promising applications in environmental analysis.

SARS-CoV-2 detection enabled by a portable and label-free photoelectrochemical genosensor using graphitic carbon nitride and gold nanoparticles

Fast, sensitive, simple, and cheap sensors are highly desirable to be applied in the health system because they improve point-of-care diagnostics, which can reduce the number of cases of infection or even deaths. In this context, here we report the development of a label-free genosensor using a screen-printed electrode modified with 2D-carbonylated graphitic carbon nitride (c-g-C₃N₄), poly(diallyldimethylammonium) chloride (PDDA), and glutathione-protected gold nanoparticles (GSH-AuNPs) for photoelectrochemical (PEC) detection of SARS-CoV-2. We also made use of Arduino and 3D printing to miniaturize the sensor device. The electrode surface was characterized by AFM and SEM techniques, and the gold nanoparticles by UV–Vis spectrophotometry. For SARS-CoV-2 detection, capture probe DNA was immobilized on the electrode surface. The hybridization of the final genosensor was tested with a synthetic single-strand DNA target and with natural saliva samples using the photoelectrochemistry method. The device presented a linear range from 1 to 10,000 fmol L⁻¹ and a limit of detection of 2.2 and 3.4 fmol L⁻¹ using cpDNA 1A and 3A respectively. The sensibility and accuracy found for the genosensor using cpDNA 1A using biological samples were 93.3 and 80% respectively, indicating the potential of the label-free and portable genosensor to detect SARS-CoV-2 RNA in saliva samples.

Insights into the multirole CoAl layered double hydroxide on boosting photoelectrochemical activity of hematite: Application to hydrogen peroxide sensing

As an important compound in many industrial and biological processes, hydrogen peroxide (H₂O₂) would cause harmfulness to human health at high concentration level. It thus is urgent to develop highly sensitive and selective sensors for practical H₂O₂ detection in the fields of water monitoring, food quality control, and so on. In this work, CoAl layered double hydroxide ultrathin nanosheets decorated hematite (CoAl-LDH/α-Fe₂O₃) photoelectrode was successfully fabricated by a facile hydrothermal process. CoAl-LDH/α-Fe₂O₃ displays the relatively wide linear range from 1 to 2000 μM with a high sensitivity of 132.0 μA mM^-1 cm^-2 and a low detection limit of 0.04 μM (S/N ≥ 3) for PEC detection of H₂O₂, which is superior to other similar α-Fe₂O₃-based sensors in literatures. The (photo)electrochemical characterizations, such as electrochemical impedance spectroscopy, Mott-Schottky plot, cyclic voltammetry, open circuit potential and intensity modulated photocurrent spectroscopy, were used to investigate the roles of CoAl-LDH on the improved PEC response of α-Fe₂O₃ toward H₂O₂. It revealed that, CoAl-LDH could not only passivate the surface states and enlarge the band bending of α-Fe₂O₃, but also could act as trapping centers for holes and followed by as active sites for H₂O₂ oxidation, thus facilitated the charge separation and transfer. The strategy for boosting PEC response would be help for the further development of semiconductor-based PEC sensors.

Highly sensitive photoelectrochemical immunosensor for detecting cancer marker CA19-9 based on a new SnSe quantum dot

A sandwich-type photoelectrochemical (PEC) immunosensor was constructed on a screen-printed electrode (SPE) using gold-coated tin selenide quantum dots (Au-SnSe QDs) to determine the carbohydrate antigen 19 9 (CA19-9). Water-soluble Au-SnSe QDs were prepared by coating low-cost SnSe QDs, prepared by reacting tin(II) 2-ethyl hexanoate with selenium ions (HNaSe) without needing to add an external capping agent (SnSe QDs). SnSe-based QDs were characterized using high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS). DSP (dithio-bis (succinimidyl propionate)) as a linker was attached on Au@SnSe QDs and conjugated with CA19-9 monoclonal antibodies (Ab₂-DSP-Au@SnSE QD). For capture probe assembling, an Au nano-layer was electrochemically deposited on a SPE by HAuCl₄ reduction using 12 cycles of cyclic voltammetry (0 to - 1.4 V) at the scan rate of 50 mV s^-1, then covered by self-assembly of DSP and covalent conjugation of CA19-9 Ab₁. Our developed PEC immunosensor showed a significant photoelectrochemical response, recorded using chronoamperometry (0.3 V), for the presence of CA19-9 antigen in serum samples under light irradiation, with a detection limit (LOD) of 0.0011 U mL^-1 and a dynamic range of 0.005-100 U mL^-1. The recovery of CA19-9 determination from serum samples was 101 to 113%.

Band gap and defect engineering of bismuth vanadate using La, Ce, Zr dopants to obtain a photoelectrochemical system for ultra-sensitive detection of glucose in blood serum

Bismuth vanadate (BiVO₄) is a promising photoactive material for the design of photoelectrochemical (PEC) analytical devices for the non-enzymatic detection of glucose. In this work, un-doped and La/Ce/Zr doped BiVO₄ photo anodes were developed by spray pyrolysis coating to generate unique 2D hierarchical architectures using the facile ultrasonic spray coating technique without any complex pre or post-treatment. The influence of different dopants on the morphology and photoelectrochemical activity of BiVO₄ coatings was investigated. X-ray diffraction, scanning electron microscopy, UV-vis optical absorbance, and positron annihilation techniques were used to evaluate the structure, defects, and optical properties of BiVO₄ films. DFT simulation confirmed the Zr doping induced band gap reduction in the BiVO₄ lattice. The Zr doping on the Bi site in BiVO₄ lattice provided significantly low Bi and V-based defect density and a higher bulk diffusion length of charge pairs (4 times that of pristine) as well as charge transfer efficiency and this led to the foremost photocurrent for water splitting. The Zr-doped BiVO₄ photo anode showed remarkable sensitivity in glucose sensing. The sensitivity and limit of detection of the Zr-doped BiVO₄ PEC device towards glucose were 0.14 mA cm^-2 mM^-1 and 1.22 μM, respectively, in the concentration range of 1-7 mM. The system showed sensitive detection of glucose in blood serum. This is the first time that a 2D morphology electrode design consisting of Zr-doped BiVO₄, which leads to exceptionally high sensitivity for glucose sensing, has been reported.

Dual ligand-induced photoelectrochemical sensing by integrating Pt/MoS2 heterostructure and Au polyhedra for sensitive detection of SARS-CoV-2

The continuous evolution of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), with discovery of multiple mutants, has caused widespread panic and concern worldwide. The rapid antigen detection method via a single ligand recognition, although currently implemented in many countries, remains challenging for mutated antigens. Herein, we present a novel strategy using a dual recognition by two types of targeted ligands, based on photoelectrochemical (PEC) sensing for detection of SARS-CoV-2 spike protein. To demonstrate this strategy, the specific antibodies are modified onto the photoactive material with a supported nanostructure, created by loading the Pt nanoparticles onto MoS₂ nanosheets (Pt/MoS₂) to boost photon-to-electricity conversion efficiency. By subsequent binding of the targeted aptamers to the Au polyhedra, which act as a signal amplifier to suppress PEC photocurrent by competing with the Pt/MoS₂ for the absorption of excitation light energy, the dual recognition is successfully achieved. The constructed biosensor not only shows satisfactory stability, high sensitivity, and selectivity, but is effective for test of the pseudovirus of SARS-CoV-2. The work provides useful advance for the development of PEC biosensors for sensitive detection of SARS-CoV-2.

2D carbon materials based photoelectrochemical biosensors for detection of cancer antigens

Cancer is a leading cause of death globally and early diagnosis is of paramount importance for identifying appropriate treatment pathways to improve cancer patient survival. However, conventional methods for cancer detection such as biopsy, CT scan, magnetic resonance imaging, endoscopy, X-ray and ultrasound are limited and not efficient for early cancer detection. Advancements in molecular technology have enabled the identification of various cancer biomarkers for diagnosis and prognosis of the deadly disease. The detection of these biomarkers can be done by biosensors. Biosensors are less time consuming compared to conventional methods and has the potential to detect cancer at an earlier stage. Compared to conventional biosensors, photoelectrochemical (PEC) biosensors have improved selectivity and sensitivity and is a suitable tool for detecting cancer agents. Recently, 2D carbon materials have gained interest as a PEC sensing platform due to their high surface area and ease of surface modifications for improved electrical transfer and attachment of biorecognition elements. This review will focus on the development of 2D carbon nanomaterials as electrode platform in PEC biosensors for the detection of cancer biomarkers. The working principles, biorecognition strategies and key parameters that influence the performance of the biosensors will be critically discussed. In addition, the potential application of PEC biosensor in clinical settings will also be explored, providing insights into the future perspective and challenges of exploiting PEC biosensors for cancer diagnosis.

Ultrasensitive photoelectrochemical biosensing platform based target-triggered biocatalytic precipitation reactions on a flower-like Bi2O2S super-structured photoanode

Herein, we reported a novel photoelectrochemical immunoassay method based on a target-triggered on/off signal of the ultra-structured Bi₂O₂S (BOS) photoanode system for the sensitive testing of carcinoembryonic antigens (CEAs) in serum samples. Well-defined three-dimensional sheet-like self-assembled flower-like Bi₂O₂S superstructures were obtained using a time-controlled hydrothermal method. Such well-shaped multifaceted surfaces were considered to be good laser cavity mirror surfaces for multifaceted reflection and refraction of excitation light in the material. An elegant enzyme biocatalytic strategy was introduced into the constructed detection model to sensitively detect CEAs. The substrate 4-chloro-1-naphthol (4-CN) was oxidized to 4-chloro-hexadienone (4-CD) under the formation of target-triggered immune complexes against mAb₁ and peroxidase-modified mAb₂. Subsequently, 4-CD produced by the biocatalytic precipitation reaction was transferred to the photoanodes of Bi₂O₂S nanoflowers (BOS NFs) to burst their photoelectric signals, thus achieving the quantification of CEAs. Through optimization of the conditions of the immunization protocol, a good negative photocurrent response to the target CEA was found in the wide range of 0.02-50 ng mL^-1 with a detection limit of 11.2 pg mL^-1. Impressively, the reported biocatalytic PEC sensing strategy on superstructures is comparable, or superior, to the gold standard ELISA kit in terms of sensitivity and the target response range. This study presents a target-mediated PEC immunoassay for biocatalytic precipitation based on a self-assembled superstructure of Bi₂O₂S, providing a fresh scheme for the analysis of disease-related markers.

Homogeneous photoelectrochemical biosensor for sensitive detection of omethoate via ALP-mediated pesticide assay and Bi2S3@Bi2Sn2O7 heterojunction as photoactive material

A simple homogeneous photoelectrochemical (PEC) sensing platform based on an alkaline phosphatase (ALP)-mediated pesticide assay was established for the sensitive detection of omethoate (OM). The Bi₂S₃@Bi₂Sn₂O₇ heterojunction was used as a photoactive material to provide stable background photocurrent signals. The inhibition of OM on ALP and PEC determination was carried out in the homogeneous system. In the absence of OM, dephosphorylation of L-ascorbic acid 2-phosphate trisodium salt (AAP) was catalyzed by ALP to produce the enzyme-catalyzed product (L-ascorbic acid, AA). AA, as an electron donor, could capture photogenerated holes on the Bi₂S₃@Bi₂Sn₂O₇ heterojunction, thus inhibiting the recombination of electron holes to achieve an increase of the photocurrent signal. When the OM was introduced, the enzyme activity of ALP was reduced due to the organophosphorus pesticides (OPs)-based enzyme inhibition, and the AA produced by catalytic hydrolysis was also reduced, thus reducing the photocurrent signal. Compared with the traditional PEC sensor for OPs, this homogeneous PEC sensor avoided immobilization procedures, covalent labeling, separation, and the steric hindrance effect caused by immobilized biomolecules, which achieved high recognition efficiency and caused a reduction in analysis time. Additionally, an ALP-mediated pesticide assay for the determination of OPs with a simplified experimental process further improved the stability and reproducibility of the PEC sensor. The PEC sensor showed high sensitivity to the target OM within a dynamic range of 0.05 ~ 500 ng mL^-1, and the detection limit was 0.0146 ng mL^-1. Additionally, the PEC biosensing system showed good selectivity and anti-interference ability, and exhibited a satisfactory result in spinach and mustard samples. A homogeneous PEC biosensor based on ALP inhibition strategy was constructed for OM detection in vegetable samples via Bi₂S₃@Bi₂Sn₂O₇ heterojunction as the photoactive substrate material.

Photocatalysis of TiO2 Sensitized with Graphitic Carbon Nitride and Electrodeposited Aryl Diazonium on Screen-Printed Electrodes to Detect Prostate Specific Antigen under Visible Light

We report on a photoelectrochemical (PEC) device to detect prostatic-specific antigen (PSA) under visible LED light irradiation within the point-of-care (POC) paradigm. The device consists of a 3D printed miniaturized photoelectrochemical system and a disposable PEC immunosensor made with screen-printed carbon electrodes (SPCEs). The SPCEs were coated with nickel single atoms anchored on graphitic carbon nitride (Ni-gC₃N₄), titanium dioxide nanoparticles (TiO₂), and aryl diazonium salt prepared from p-aminobenzoic acid. The electrodeposited aryl diazonium on Ni-gC₃N₄/TiO₂ decreased the recombination of photogenerated charge carriers, leading to a 3.1-fold increase in the photocurrent compared to pure TiO₂. This functionalization strategy provides carboxylic groups to anchor antibodies via the carbodiimide reaction, which may be extended to any other type of immunosensor. Under optimal conditions, the PEC immunosensor was able to detect PSA from 10^-16 to 10^-8 g mL^-1 with a detection limit of 0.06 fg mL^-1. The device robustness was confirmed with reproducibility and stability tests. PSA could also be detected in human serum samples, which demonstrates the potential of the PEC immunosensor for clinical diagnosis.

Emerging architecture titanium carbide (Ti3C2Tx) MXene based photocatalyst toward degradation of hazardous pollutants: Recent progress and perspectives

MXenes family has aroused marvelous consideration as a frontier photoactive candidate for solar energy transformation and environmental remediation. 2D Ti₃C₂ exhibit a unique layered microstructure, large surface functional groups (-F, -OH, -O), substantial sorption selectivity, superior reduction efficiency, and electrical conductivity. Electronically conductive Ti₃C₂T_x with tunable energy band gap (0.92-1.75eV) makes it one of the most potential photoactive materials for photodegradation. The present review paper aims to design cost-effective heterojunctions and Schottky junctions of Ti₃C₂ with transition metal oxides, sulfides, g-C₃N₄, and other organic frameworks. The discussion mainly involves different aspects related to its tunable electronic structure, stability problems, and surface morphology control. In addition, the advantages of Ti₃C₂ in fabricating highly efficient Ti₃C₂ based catalytic junctions exhibiting suppressed charge carrier recombination are discussed with particular emphasis on their adsorption and redox properties for the removal of toxic dyes, heavy metal ions, and various pharmaceuticals. Finally, current challenges and research directions are outlined and prospected for the future development of Ti₃C₂ based photocatalytic systems.

Target-Induced In Situ Formation of Organic Photosensitizer: A New Strategy for Photoelectrochemical Sensing

Small-molecule photosensitizers have great application prospects in photoelectrochemical (PEC) sensing due to their defined composition, diversified structure, and adjustable photophysical properties. Herein, we propose a new strategy for PEC analysis based on the target-induced in situ formation of the organic photosensitizer. Taking thiophenol (PhSH) as a model analyte, we designed and synthesized a 2,4-dinitrophenyl (DNP)-caged coumarin precursor (Dye-PhSH), which was then covalently coupled onto the TiO₂ nanoarray substrate to obtain the working photoanode. Due to the intramolecular photoinduced electron transfer process, Dye-PhSH has only a very weak photoelectric response. Upon reacting with the target, Dye-PhSH undergoes a tandem reaction of the detachment of the DNP moiety and the intramolecular cyclization process, which leads to a coumarin dye with a pronounced photoelectric effect, thus achieving a highly selective turn-on PEC response to PhSH. For the first time, this study was to construct a PEC sensor by exploiting specific organic reactions for the in situ generation of small molecule-based photoactive material. It can be anticipated that the proposed strategy will expand the paradigm of PEC sensing and holds great potential for detecting various other analytes.

Spatially-extended 3D magnetic DNA nanodevice-based split-type photoelectrochemical strategy for sensitive and reliable miRNA detection in cancer cells

To improve the accuracy of PEC sensing. We developed a split-type “turn-off” PEC biosensor based on spatially-extended 3D magnetic DNA nanodevices with high-order DNA amplifiers for sensitive and reliable detection of miRNAs in cancer cells.

Development of QDs-based nanosensors for heavy metal detection: A review on transducer principles and in-situ detection

Heavy metal pollution has severe threats to the ecological environment and human health. Thus, it is urgent to achieve the rapid, selective, sensitive and portable detection of heavy metal ions. To overcome the defects of traditional methods such as time-consuming, low sensitivity, high cost and complicated operation, QDs (Quantum dots)-based nanomaterials have been used in sensors to significantly improve the sensing performance. Due to their excellent physicochemical properties, high specific surface area, high adsorption and reactive capacity, nanomaterials could act as potential probes or offer enhanced sensitivity and create a promising nanosensors platform. In this review, the rapidly advancing types of QDs for heavy metal ions detection are first summarized. Modified with ligands, nanomaterials, or biomaterials, QDs are assembled on sensors by the interaction of electrostatic adsorption, chemical bonding, steric hindrance, and base-pairing. The stability of QDs-based nanosensors is improved by doping the elements to QDs, providing the reference substance, optimizing the assemble strategies and so on. Then, according to transducer principles, the two most typical sensor categories based on QDs: optical and electrochemical sensors are highlighted to be discussed. In the meanwhile, portable devices combining with QDs to adapt the practical detection in complex situations are summarized. The deficiencies and future challenges of QDs in toxicity, specificity, portability, multi-metal co-detection and degradation during the detection are also pointed out. In the end, the development trends of QDs-based nanosensors for heavy metal ions detection are discussed. This review presents an overall understanding, recent advances, current challenges and future outlook of QDs-based nanosensors for heavy metal detection.

Ultrasensitive photoelectrochemical immunoassay for prostate-specific antigen based on silver nanoparticle-triggered ion-exchange reaction with ZnO/CdS nanorods

Prostate-specific antigen (PSA), a glycoprotein that is most likely to cause prostate cancer, has attracted widespread attention in recent years due to its increasing threat to people's lives and health. Herein, we developed a new signal-amplified photoelectrochemical (PEC) immunosensing method for quantitative monitoring of the target PSA based on the ion-exchange reaction for the in situ formation of ZnO/CdS/Ag₂S nanohybrids triggered by the as-released silver ions (Ag⁺) from silver nanolabels. Initially, the introduction of a target PSA caused the formation of a sandwich immunocomplex in an anti-PSA capture antibody (cAb)-coated microplate with the help of a silver nanoparticle-labeled detection antibody (AgNPs-dAb). Thereafter, the introduced AgNPs were dissolved with acid to release numerous silver ions. In this regard, an ion-exchange reaction occurred between the silver ions and ZnO/CdS nanorods on the photosensitive electrode, thus producing ZnO/CdS/Ag₂S nanohybrids to generate a relatively strong photocurrent. Under optimal conditions, the ion-exchange reaction-based PEC immunoassay exhibited a good linear range of 0.05-50 ng mL^-1 and allowed the detection of the target PSA at a concentration as low as 0.018 ng mL^-1. In addition, the PEC immunoassay displayed satisfactory repeatability, high specificity, and acceptable method accuracy. Importantly, the ion-exchange reaction-based PEC immunoassay provides a new perspective for the detection of other disease-related biomarkers by controlling the corresponding antibodies.

Magnetic borate-modified Mxene: A highly affinity material for the extraction of catecholamines

A novel magnetic borate-modified MXene composite was prepared by in situ growth of Fe₃O₄ particles onto the surface of phenylboronic acid modified Ti₃C₂T_x nanosheets. The magnetic composite possesses highly selective recognition properties to catecholamines, and high adsorption capacity (up to 319.6 μmol g^-1) for dopamine. Besides, the adsorption of urinary catecholamines can be accomplished within 2.0 min. The excellent adsorption performance can be assigned to its unique 2D layered structures, which helps to shorten the diffusion path and facilitate molecular transport. In addition, the multilayer adsorption and the synergetic interactions of borate affinity, van der Waals forces, hydrogen bonding and π-π stacking also contribute to the adsorption. By coupling the magnetic boronate affinity composites with high-performance liquid chromatography-fluorescence detection, a sensitive method for the determination of catecholamines in urine samples was proposed. The validation results revealed it can offer good linearities (correlation coefficients higher than 99%). The method detection limits were 0.06, 0.16, 0.03 and 0.14 ng mL^-1 for norepinephrine, epinephrine, dopamine and isoprenaline, respectively, and relative recoveries for these catecholamines were in the range of 98.56-108.1%, 92.56-110.0%, 98.79-112.3% and 88.14-97.81%, respectively. The proposed method was successfully applied to analyze the catecholamines in the urine samples from 15 healthy volunteers and 16 patients with Alzheimer's disease. The results indicated that the magnetic borate-modified Mxene composite possesses superior extraction performance, and can be used as an outstanding candidate for the extraction of catecholamines in pre-clinical or clinical studies.

Liquid-Exfoliated 2D Materials for Optoelectronic Applications

Two-dimensional (2D) materials have attracted tremendous research attention in recent days due to their extraordinary and unique properties upon exfoliation from the bulk form, which are useful for many applications such as electronics, optoelectronics, catalysis, etc. Liquid exfoliation method of 2D materials offers a facile and low-cost route to produce large quantities of mono- and few-layer 2D nanosheets in a commercially viable way. Optoelectronic devices such as photodetectors fabricated from percolating networks of liquid-exfoliated 2D materials offer advantages compared to conventional devices, including low cost, less complicated process, and higher flexibility, making them more suitable for the next generation wearable devices. This review summarizes the recent progress on metal-semiconductor-metal (MSM) photodetectors fabricated from percolating network of 2D nanosheets obtained from liquid exfoliation methods. In addition, hybrids and mixtures with other photosensitive materials, such as quantum dots, nanowires, nanorods, etc. are also discussed. First, the various methods of liquid exfoliation of 2D materials, size selection methods, and photodetection mechanisms that are responsible for light detection in networks of 2D nanosheets are briefly reviewed. At the end, some potential strategies to further improve the performance the devices are proposed.

Double ion-exchange reaction-based photoelectrochemical immunoassay for sensitive detection of prostate-specific antigen

This work developed a double ion-exchange reaction-based photoelectrochemical (PEC) immunoassay with the split-type detection mode for sensitive detection of prostate-specific antigen (PSA, used as a model). The nanocomposite of cadmium sulfide and nickel sulfide (CdS@NiS nanocomposite), as the photoactive material, was rapidly synthesized by two-step hydrothermal treatment. In the presence of target PSA, the cupric oxide nanoparticle (CuO NP) labeled detection antibody was introduced into the detection system by sandwich immunoreaction and the copper (Cu²⁺) ions was released from CuO nanoparticles by acid to participate in double ion-exchange reaction. The double ion-exchange reaction on the photoelectric sensing interface between Cu²⁺ and CdS@NiS nanocomposites formed the weak photoactive material Cu_xS (x = 1, 2) to reduce the photocurrent. Under optimal conditions, the double ion-exchange reaction-based PEC immunoassay exhibited good photocurrent responses toward target PSA within the dynamic working range from 0.01 ng mL^-1 to 50 ng mL^-1 at a low limit of detection (LOD) of 2.9 pg mL^-1. Besides, our work could achieve good reproducibility and high specificity under the split-type detection mode. Compared with human PSA ELISA kit, the accuracy obtained by our strategy was satisfactory. Importantly, this Cu²⁺-activated double ion-exchange reaction-based PEC immunoassay provides a promising platform for the detection of biomarkers.