Recent advances of bimetallic nanomaterials and its nanocomposites for biosensing applications

Dual lateral flow assay based on PdRu nanocages for human Papillomavirus detection

Cervical cancer is one of the most common gynecological malignancies, with the vast majority of which being caused by persistent infection with Human Papillomavirus (HPV) 16 and 18. The current available HPV detection methods are sensitive and genotyped but are restricted by expensive instruments and skilled personnel. The development of an easy-to-use, rapid, and cost-friendly analysis method for HPV is of great need. Herein, hollow palladium-ruthenium nanocages modified with two oligonucleotides (PdRu capture probes) were constructed for genotyping and simultaneous detection of target nucleic acids HPV16 and HPV18 by dual lateral flow assay (DLFA). PdRu capture probes were endowed with bi-functions for the first time, which could be used to output signals and hybridize target nucleic acids. Under optimized conditions, the PdRu based-DLFA with detection limits of 0.93 nM and 0.19 nM, respectively, exhibited convenient operation, and high sensitivity. Meanwhile, the DLFA achieved excellent rapid detection within 20 min, which was attributed to capture probes that can be directly bound to amplification-free target nucleic acids. Therefore, the development of PdRu-based DLFA can be utilized for rapid, sensitive, and simultaneous genotyping detection of HPV16 and HPV18, showing great application for nucleic acid detection.

Neuromodulatory Compensation of Cortical Neural Activity on Electrodeposited Pt/Ir Modified Microelectrode Arrays for Temperature Transients

Temperature has a profound influence on various neuromodulation processes and has emerged as a focal point. However, the effects of acute environmental temperature fluctuations on cultured cortical networks have been inadequately elucidated. To bridge this gap, we have developed a brain-on-a-chip platform integrating cortical networks and electrodeposited Pt/Ir modified microelectrode arrays (MEAs) with 3D-printed bear-shaped triple chambers, facilitating control of temperature transients. This innovative system administers thermal stimuli while concurrently monitoring neuronal activity, including spikes and local field potentials, from 60 microelectrodes (diameter: 30 μm; impedance: 9.34 ± 1.37 kΩ; and phase delay: -45.26 ± 2.85°). Temperature transitions of approximately ±10 °C/s were applied to cortical networks on MEAs via in situ perfusion within the triple chambers. Subsequently, we examined the spatiotemporal dynamics of the brain-on-a-chip under temperature regulation at both the group level (neuronal population) and their interactions (network dynamics) and the individual level (cellular activity). Specifically, we found that after the temperature reduction neurons enhanced the overall information transmission efficiency of the network through synchronous firing to compensate for the decreased efficiency of single-cell level information transmission, in contrast to temperature elevation. By leveraging the integration of high-performance MEAs with perfusion chambers, this investigation provides a comprehensive understanding of the impact of temperature on the spatiotemporal dynamics of neural networks, thereby facilitating future exploration of the intricate interplay between temperature and brain function.

A novel electrochemical aptasensor based on AgPdNPs/PEI-GO and hollow nanobox-like Pt@Ni-CoHNBs for procymidone detection

Herein, an aptasensor based on a signal amplification strategy was developed for the sensitive detection of procymidone (PCM). AgPd nanoparticles/Polenimine Graphite oxide (AgPdNPs/PEI-GO) was weaned as electrode modification material to facilitate electron transport and increase the active sites on the electrode surface. Besides, Pt@Ni-Co nanoboxes (Pt@Ni-CoHNBs) were utilized to be carriers for signaling tags, after hollowing ZIF-67 and growing Pt, the resulting Pt@Ni-CoHNBs has a tremendous amounts of folds occurred on the surface, enables it to carry a larger quantity of thionine, thus amplify the detectable electrochemical signal. In the presence of PCM, the binding of PCM to the signal probe would trigger a change in electrical signal. The aptasensor was demonstrated with excellent sensitivity and a low detection limit of 0.98 pg·mL-1, along with a wide linear range of 1 μg·mL-1 to 1 pg·mL-1. Meanwhile, the specificity, stability and reproducibility of the constructed aptasensor were proved to be satisfactory.

Directionally Exfoliated Ni/Co Hydroxide-Organic Framework Nanosheets for Enhanced Wearable Glucose Sensing

We report two-dimensional (2D) Ni/Co-based metal hydroxide-organic framework nanosheets (Ni/Co-MHOF NSs) for the construction of an efficient electrochemical nonenzymatic glucose sensor. The nanosheet architecture maximizes the exposure of coordinatively unsaturated metal sites, which enables a largely improved electrocatalytic performance toward the glucose oxidation reaction. The as-designed nonenzymatic sensor exhibits a high sensitivity of 235.71 μA·mM-1·cm-2 and a wide linear range of 1-3000 μM. The sensor presents excellent selectivity against several potential interferences and a short response time of 3.0 s. Of interest, a high-performance flexible sensor is developed by depositing the Ni/Co-MHOF NSs on screen-printed electrodes, which reveal decent bending stability. The designed glucose sensor patch can attach to the human body and realize noninvasive glucose monitoring in human sweat. This work may shed light on the application of novel MHOFs in the field of wearable electrochemical sensing.

Hand-crafted potent hydroxyl-rich husk succoured Fe3O4 @ Cu, Mn, Ni, Co - tetra-metallic heterogenous nanocomposite as a catalytic accelerant

An innovative means of synthesizing mechanically recoverable ternary nanocomposite (NC) comprising Fe3O4 supported on Oryza sativa husk (OSH) and ornamented with 3d tetra-metals (M = Mn, Co, Ni, Cu) is proposed using a manual grinding method. This NC was prepared via a one-step manual method. The added advantage of this method is the non-usage of solvents during the synthesis of the NC. In situ, the NPs were grown on OSH-supported magnetite NPs, where they combined to form a matrix to facilitate the formation of the metal NPs in it. The as-crafted Oryza sativa husk-supported magnetite @ tetra-metallic nanocore hybrid (OSFTC) was confirmed via several characterisation techniques, such as XRD, FT-IR, HR-TEM, FE-SEM, XPS, VSM, NMR, and UV-vis analysis. The interesting twist in this NC is that the leaching-in of metals toward the core of the NC increases the magnetic nature of the composite as evidenced by VSM analysis. The electrostatic attraction between NPs formed and the matrix plausibly results in enhanced photocatalytic degradation of pharma-waste in an efficient way. The activity of the OSFTC increases for ciprofloxacin and paracetamol by 67 and 71%. Furthermore, the hydrogenation of anthropogenic pollutants via a foreign agent yields a good conversion percentage of 92%. In addition, the noxious hexavalent chromium is converted to a trivalent cation with the help of OSFTC, indicating good conversion under ambient conditions. Herein, OSFTC also exhibited effective activity against both Gram-positive and Gram-negative bacteria. Moreover, the ternary composite demonstrates consistent and commendable activity against pharmaceutical compounds and carcinogenic pollutants. The OSFTC was designed in a way to perform the cleavage of bonds for toxic materials efficiently.

Biosensing Platforms for Cardiac Biomarker Detection

Myocardial infarction (MI) is a cardiovascular disease that occurs when there is an elevated demand for myocardial oxygen as a result of the rupture or erosion of atherosclerotic plaques. Globally, the mortality rates associated with MI are steadily on the rise. Traditional diagnostic biomarkers employed in clinical settings for MI diagnosis have various drawbacks, prompting researchers to investigate fast, precise, and highly sensitive biosensor platforms and technologies. Biosensors are analytical devices that combine biological elements with physicochemical transducers to detect and quantify specific compounds or analytes. These devices play a crucial role in various fields including healthcare, environmental monitoring, food safety, and biotechnology. Biosensors developed for the detection of cardiac biomarkers are typically electrochemical, mass, and optical biosensors. Nanomaterials have emerged as revolutionary components in the field of biosensing, offering unique properties that significantly enhance the sensitivity and specificity of the detection systems. This review provides a comprehensive overview of the advancements and applications of nanomaterial-based biosensing systems. Beginning with an exploration of the fundamental principles governing nanomaterials, we delve into their diverse properties, including but not limited to electrical, optical, magnetic, and thermal characteristics. The integration of these nanomaterials as transducers in biosensors has paved the way for unprecedented developments in analytical techniques. Moreover, the principles and types of biosensors and their applications in cardiovascular disease diagnosis are explained in detail. The current biosensors for cardiac biomarker detection are also discussed, with an elaboration of the pros and cons of existing platforms and concluding with future perspectives.

Bimetallic Coordination Polymers: Synthesis and Applications in Biosensing and Biomedicine

Bimetallic coordination polymers (CPs) have two different metal ions as connecting nodes in their polymer structure. The synthesis methods of bimetallic CPs are mainly categorized into the one-pot method and post-synthesis modifications according to various needs. Compared with monometallic CPs, bimetallic CPs have synergistic effects and excellent properties, such as higher gas adsorption rate, more efficient catalytic properties, stronger luminescent properties, and more stable loading platforms, which have been widely applied in the fields of gas adsorption, catalysis, energy storage as well as conversion, and biosensing. In recent years, the study of bimetallic CPs synergized with cancer drugs and functional nanomaterials for the therapy of cancer has increasingly attracted the attention of scientists. This review presents the research progress of bimetallic CPs in biosensing and biomedicine in the last five years and provides a perspective for their future development.

Co-based Nanozymatic Profiling: Advances Spanning Chemistry, Biomedical, and Environmental Sciences

Nanozymes, next-generation enzyme-mimicking nanomaterials, have entered an era of rational design; among them, Co-based nanozymes have emerged as captivating players over times. Co-based nanozymes have been developed and have garnered significant attention over the past five years. Their extraordinary properties, including regulatable enzymatic activity, stability, and multifunctionality stemming from magnetic properties, photothermal conversion effects, cavitation effects, and relaxation efficiency, have made Co-based nanozymes a rising star. This review presents the first comprehensive profiling of the Co-based nanozymes in the chemistry, biology, and environmental sciences. The review begins by scrutinizing the various synthetic methods employed for Co-based nanozyme fabrication, such as template and sol-gel methods, highlighting their distinctive merits from a chemical standpoint. Furthermore, a detailed exploration of their wide-ranging applications in biosensing and biomedical therapeutics, as well as their contributions to environmental monitoring and remediation is provided. Notably, drawing inspiration from state-of-the-art techniques such as omics, a comprehensive analysis of Co-based nanozymes is undertaken, employing analogous statistical methodologies to provide valuable guidance. To conclude, a comprehensive outlook on the challenges and prospects for Co-based nanozymes is presented, spanning from microscopic physicochemical mechanisms to macroscopic clinical translational applications.

Rapid assays of SARS-CoV-2 virus and noble biosensors by nanomaterials

The COVID-19 outbreak caused by SARS-CoV-2 in late 2019 has spread rapidly across the world to form a global epidemic of respiratory infectious diseases. Increased investigations on diagnostic tools are currently implemented to assist rapid identification of the virus because mass and rapid diagnosis might be the best way to prevent the outbreak of the virus. This critical review discusses the detection principles, fabrication techniques, and applications on the rapid detection of SARS-CoV-2 with three categories: rapid nuclear acid augmentation test, rapid immunoassay test and biosensors. Special efforts were put on enhancement of nanomaterials on biosensors for rapid, sensitive, and low-cost diagnostics of SARS-CoV-2 virus. Future developments are suggested regarding potential candidates in hospitals, clinics and laboratories for control and prevention of large-scale epidemic.

Electrochemical Sensor for Tryptophan Determination Based on Trimetallic-CuZnCo-Nanoparticle-Modified Electrodes

The superior properties of electrodeposited trimetallic CuZnCo nanoparticles, arising from the synergistic effect of combining the unique features of metallic components, were confirmed using voltametric measurements. The surface morphology and structure of the as-prepared electrocatalysts were determined using scanning electron microscopy, energy-dispersive X-ray, and X-ray photoelectron spectroscopy techniques. Here, the trimetallic CuZnCo nanoparticles were synthesized as a powerful redox probe and highly efficient signal amplifier for the electrochemical oxidation of tryptophan. Differential pulse voltammetry studies showed a linear relationship with a tryptophan concentration of 5-230 μM, and the low detection limit was identified at 1.1 μM with a sensitivity of 0.1831 μA μM-1 cm-2.

Nanomedicine Strategies in Conquering and Utilizing the Cancer Hypoxia Environment

Cancer with a complex pathological process is a major disease to human welfare. Due to the imbalance between oxygen (O2) supply and consumption, hypoxia is a natural characteristic of most solid tumors and an important obstacle for cancer therapy, which is closely related to tumor proliferation, metastasis, and invasion. Various strategies to exploit the feature of tumor hypoxia have been developed in the past decade, which can be used to alleviate tumor hypoxia, or utilize the hypoxia for targeted delivery and diagnostic imaging. The strategies to alleviate tumor hypoxia include delivering O2, in situ O2 generation, reprogramming the tumor vascular system, decreasing O2 consumption, and inhibiting HIF-1 related pathways. On the other side, hypoxia can also be utilized for hypoxia-responsive chemical construction and hypoxia-active prodrug-based strategies. Taking advantage of hypoxia in the tumor region, a number of methods have been applied to identify and keep track of changes in tumor hypoxia. Herein, we thoroughly review the recent progress of nanomedicine strategies in both conquering and utilizing hypoxia to combat cancer and put forward the prospect of emerging nanomaterials for future clinical transformation, which hopes to provide perspectives in nanomaterials design.

Organic Electronics in Biosensing: A Promising Frontier for Medical and Environmental Applications

The promising field of organic electronics has ushered in a new era of biosensing technology, thus offering a promising frontier for applications in both medical diagnostics and environmental monitoring. This review paper provides a comprehensive overview of organic electronics' remarkable progress and potential in biosensing applications. It explores the multifaceted aspects of organic materials and devices, thereby highlighting their unique advantages, such as flexibility, biocompatibility, and low-cost fabrication. The paper delves into the diverse range of biosensors enabled by organic electronics, including electrochemical, optical, piezoelectric, and thermal sensors, thus showcasing their versatility in detecting biomolecules, pathogens, and environmental pollutants. Furthermore, integrating organic biosensors into wearable devices and the Internet of Things (IoT) ecosystem is discussed, wherein they offer real-time, remote, and personalized monitoring solutions. The review also addresses the current challenges and future prospects of organic biosensing, thus emphasizing the potential for breakthroughs in personalized medicine, environmental sustainability, and the advancement of human health and well-being.

One-pot synthesis of AuPt@FexOy nanoparticles with excellent peroxidase-like activity for development of ultrasensitive colorimetric lateral flow immunoassay of cardiac troponin I

Detection of cardiac troponin I (cTnI) plays a critical role in diagnosing acute myocardial infarction (AMI). In this report, a new kind of spherical AuPt@FexOy core@shell nanoparticles (termed as AuPt@FexOy NPs) were one-pot synthesized by a redox interaction-engaged strategy (RIES) without the addition of any surfactants or reducing agents. The as-synthesized AuPt@FexOy NPs not only retain the plasmonic activity of gold nanoparticles (AuNPs), but also possess excellent catalytic activities of platinum nanoparticles (PtNPs) and FexOy nanoclusters. The features of AuPt@FexOy NPs enable greatly enhance the colorimetric detection sensitivity of lateral flow immunoassay (LFIA) through integrating AuPt@FexOy NPs labeling procedure and catalyzing oxidation of chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) signal amplification strategy. The as-developed colorimetric LFIA (termed as AuPt@FexOy-LFIA) exhibits the limit of detection (LOD) as 26.0 pg mL-1 cTnI under the TMB signal amplification mode. In particular, the detection results of cTnI in 40 clinical seral samples by AuPt@FexOy-LFIA are correlated well with those of cTnI in the same samples by commercial enzyme-linked immunosorbent assay (ELISA) detection kit (R2 = 0.97, slope = 1), demonstrating the highly reliable analytical performance and good application prospect of AuPt@FexOy-LFIA.

Tuning the plasmonic and catalytic signals of Au@Pt nanoparticles for dual-mode biosensing

Dual-mode biosensors have gained great attention due to their excellent detection accuracy provided by the mutual verification of output signals. However, current strategies for dual-mode sensing mainly rely on a signal probe exhibiting dual properties that may encounter unreliability. Herein, we report a dual-mode biosensing strategy by modulating the plasmonic and catalytic activities of nanoparticles through a surface growing approach. Ascorbic acid enables the growing of Au shell on Au@Pt NPs to tune both their peroxidase-like activity and plasmonic signal. Enzyme-catalyzed reactions can generate ascorbic acid to modulate the plasmonic and catalytic activities of nanoparticles. Combined with enzyme-linked immunosorbent assay, it enables dual-mode immunoassays of carbofuran with both a colorimetric readout by a spectrometer down to 0.1 ppb and a naked-eye readout of 5 ppb. This dual-mode biosensing technique advantages in tunable sensitivity and robustness, holding promise as an analytical platform for biomedical diagnosis and food safety.

Recent Advances in Bimetallic Nanoporous Gold Electrodes for Electrochemical Sensing

Bimetallic nanocomposites and nanoparticles have received tremendous interest recently because they often exhibit better properties than single-component materials. Improved electron transfer rates and the synergistic interactions between individual metals are two of the most beneficial attributes of these materials. In this review, we focus on bimetallic nanoporous gold (NPG) because of its importance in the field of electrochemical sensing coupled with the ease with which it can be made. NPG is a particularly important scaffold because of its unique properties, including biofouling resistance and ease of modification. In this review, several different methods to synthesize NPG, along with varying modification approaches are described. These include the use of ternary alloys, immersion-reduction (chemical, electrochemical, hybrid), co-electrodeposition-annealing, and under-potential deposition coupled with surface-limited redox replacement of NPG with different metal nanoparticles (e.g., Pt, Cu, Pd, Ni, Co, Fe, etc.). The review also describes the importance of fully characterizing these bimetallic nanocomposites and critically analyzing their structure, surface morphology, surface composition, and application in electrochemical sensing of chemical and biochemical species. The authors attempt to highlight the most recent and advanced techniques for designing non-enzymatic bimetallic electrochemical nanosensors. The review opens up a window for readers to obtain detailed knowledge about the formation and structure of bimetallic electrodes and their applications in electrochemical sensing.

Facile immobilization of cholesterol oxidase on Pt,Ru-C nanocomposite and ionic liquid-modified carbon paste electrode for an efficient amperometric free cholesterol biosensing

In present work, the enzyme cholesterol oxidase (ChOx) was immobilized by Nafion® (Naf) on Pt,Ru-C nanocomposite and an ionic liquid (IL)-modified carbon paste electrode (CPE) in order to create cholesterol biosensor (Naf/ChOx/Pt,Ru-C/IL-CPE). The prepared working electrodes were characterized using scanning electron microscopy-energy-dispersive spectrometry, while their electrochemical performance was evaluated using electrochemical impedance spectroscopic, cyclic voltammetric, and amperometric techniques. Excellent synergism between IL 1-allyl-3-methylimidazolium dicyanamide ([AMIM][DCA]), Pt,Ru-C, and ChOx, as modifiers of CPE, offers the most pronounced analytical performance for improved cholesterol amperometric determination in phosphate buffer solution pH 7.50 at a working potential of 0.60 V. Under optimized experimental conditions, a linear relationship between oxidation current and cholesterol concentration was found for the range from 0.31 to 2.46 µM, with an estimated detection limit of 0.13 µM and relative standard deviation (RSD) below 5.5%. The optimized amperometric method in combination with the developed Naf/ChOx/Pt,Ru-C/IL-CPE biosensor showed good repeatability and high selectivity towards cholesterol biosensing. The proposed biosensor was successfully applied to determine free cholesterol in a human blood serum sample via its enzymatic reaction product hydrogen peroxide despite the presence of possible interferences. The percentage recovery ranged from 99.08 to 102.81%, while RSD was below 2.0% for the unspiked as well as the spiked human blood serum sample. The obtained results indicated excellent accuracy and precision of the method, concluding that the developed biosensor can be a promising alternative to existing commercial cholesterol tests used in medical practice.

Conjugated Polymers for Aptasensing Applications

Rapid and specific assaying of molecules that report on a pathophysiological condition, environmental pollution, or drug concentration is pivotal for establishing efficient and accurate diagnostic systems. One of the main components required for the construction of these systems is the recognition element (receptor) that can identify target analytes. Oligonucleotide switching structures, or aptamers, have been widely studied as selective receptors that can precisely identify targets in different analyzed matrices with minimal interference from other components in an antibody-like recognition process. These aptasensors, especially when integrated into sensing platforms, enable a multitude of sensors that can outperform antibody-based sensors in terms of flexibility of the sensing strategy and ease of deployment to areas with limited resources. Research into compounds that efficiently enhance signal transduction and provide a suitable platform for conjugating aptamers has gained huge momentum over the past decade. The multifaceted nature of conjugated polymers (CPs), notably their versatile electrical and optical properties, endows them with a broad range of potential applications in optical, electrical, and electrochemical signal transduction. Despite the substantial body of research demonstrating the enhanced performance of sensing devices using doped or nanostructure-embedded CPs, few reviews are available that specifically describe the use of conjugated polymers in aptasensing. The purpose of this review is to bridge this gap and provide a comprehensive description of a variety of CPs, from a historical viewpoint, underpinning their specific characteristics and demonstrating the advances in biosensors associated with the use of these conjugated polymers.

Hollow cage-like PtCu nanozyme-regulated photo-activity of porous CdIn2S4/SnO2 heterojunctions for ultrasensitive PEC sensing of streptomycin

Streptomycin (STR) is extensively employed for preventive and curative purposes in animals, which is accumulated in human body through food chain and induces serious health problems. Herein, highly photoactive type II heterojunctions of porous CdIn₂S₄/SnO₂ microspheres were initially prepared, which can effectively inhibit the recombination of the charge-hole pairs. Besides, the peroxidase-mimicking catalytic property of the hollow PtCu nanocages (PtCu NCs) was carefully investigated by UV-vis spectroscopy, where catalytic oxidation of tetramethylbenzidine behaved as the benchmarked reaction. On such basis, a highly selective photoelectrochemical (PEC) aptasensor was established with the CdIn₂S₄/SnO₂ heterojunctions for bioanalysis of streptomycin, coupled by the PtCu NCs nanozyme-catalyzed biocatalytic precipitation to achieve signal magnification. Specifically, the home-made nanozyme was applied for catalytic oxidation of 3,3'-diaminobenzidine to generate insulating precipitate in aqueous H₂O₂ system and thereby block the light harvesting on the photoanode, showing steeply declined PEC responses. The as-built aptasensor showed a broad linear range of 0.01-200 nM with a low limit of detection of 7.50 pM (S/N = 3) for such analysis, combined by exploring its practical detection in milk samples. This work shows excellent nanozyme-catalyzed signal amplification for fabrication of ultrasensitive PEC biosensors towards other antibiotics detection.

Biogenic silver based nanostructures: Synthesis, mechanistic approach and biological applications

The alarming impact of antibiotic resistance sparked the quest for complementary treatments to overcome the confrontation over resistant pathogens. Metallic nanoparticles, especially silver nanoparticles (Ag NPs) have gained a much attention because of their remarkable biological characteristics. Moreover, their medicinal properties can be enhanced by preparing the composites with other materials. This article delves a comprehensive review of biosynthesis route for Ag NPs and their nanocomposites (NCs) with in-depth mechanism, methods and favorable experimental parameters. Comprehensive biological features Ag NPs such as antibacterial, antiviral, antifungal have been examined, with a focus on their potential uses in biomedicine and diagnostics has also been discussed. Additionally, we have also explored the hitches and potential outcomes of biosynthesis of Ag NPs in biomedical filed.

Sequential-Dependent Synthesis of Bimetallic Silver-Chromium Nanoparticles for Multichannel Sensing, Logic Computing, and 3 in 1 Information Protection

Bimetallic nanomaterials (BNMs) have been used in sensing, biomedicine, and environmental remediation, but their multipurpose and comprehensive applications in molecular logic computing and information security protection have received little attention. Herein, This synthesis method is achieved by sequentially adding reactants under ice bath conditions. Interestingly, Ag-Cr NPs can dynamically selectively sense anions and reductants in multiple channels. Especially, ClO^- can be quantitatively detected by oxidizing Ag-Cr NPs with detection limits of 98.37 nM (at 270 nm) and 31.83 nM (at 394 nm). Based on sequential-dependent synthesis process of Ag-Cr NPs, Boolean logic gates and customizable molecular keypad locks are constructed by setting the reactants as the inputs, the states of the resulting solutions as the outputs. Furthermore, dynamically selective response patterns of the Ag-Cr NPs can be converted into binary strings to exploit molecular crypto-steganography to encode, store, and hide information. By integrating the three dimensions of authorization, encryption, and steganography, 3 in 1 advanced information protection based on Ag-Cr nanosensing system can be achieved, which can enhance the anti-cracking ability of information. This research will promote the development and application of nanocomposites in the field of information security and deepen the connection between molecular sensing and the information world.

THE EFFECT OF DISPERSION TIME ON THE STRUCTURE AND THERMOPHYSICAL PROPERTIES OF SYSTEMS BASED ON POLYETHYLENE GLYCOL AND MONTMORILLONITE

In this work, the effect of ultrasonic dispersion time on the structural and thermophysical properties of nanocomposites was studied. Model systems were made based on polyethylene glycol and montmorillonite. All samples had the same composition and filler content (5% by weight), the ultrasonic treatment time was from 5 to 12 minutes. The methods of wide-angle X-ray scattering and differential scanning calorimetry were used to establish the dependence of the properties of the systems on the dispersion time. Data analysis of the obtained results showed that the variation of ultrasonic dispersion time significantly affects the properties of polymer nanocomposites. As the mixing time increases, the interplanar distance of montmorillonite increases, which indicates an increase in the degree of intercalation of the polymer matrix. At the same time, the crystallinity of the nanocomposite decreases, which corresponds to the increase in the area of the polymer/filler boundary layer. The melting temperature of the nanocomposite increases with increasing dispersion time. This trend is a consequence of the complication of the thermal movement of polymer molecules due to the presence of a developed surface of the filler. It is shown that with an increase in the sonication time, the part of the immobilized amorphous fraction of the polymer increases. This is explained by the fact that the polymer intercalated in the interlayer space of montmorillonite loses its ability to cooperative movement, that is, to glass transition. It was established that the maximum improvement of system properties is observed at a dispersion time of 10 min. In this state, the montmorillonite particles are most stratified, which leads to the maximum increase in the area of the boundary layer. During further mixing, processes of aggregation of montmorillonite particles and destruction of polymer molecules occur, which leads to the loss of the desired properties of the nanocomposite. Finding the optimal mixing time of a polymer nanocomposite makes it possible to obtain the desired properties of systems with a defined composition.

Recent Advances in Metal Nanocomposite-Based Electrochemical (Bio)Sensors for Pharmaceutical Analysis

Rising rates of drug abuse and pharmaceutical pollution throughout the world as a consequence of increased drug production and utilization pose a serious risk to public health and to environmental integrity. It is thus critical that reliable analytical approaches to detecting drugs and their metabolites in a range of sample matrices be developed. Recent advances in the design of nanomaterial-based electrochemical sensors and biosensors have enabled promising new approaches to pharmaceutical analysis. In particular, the development of a range of novel metal nanocomposites with enhanced catalytic properties has provided a wealth of opportunities for the design of rapid and reliable platforms for the detection of specific pharmaceutical compounds. The present review provides a comprehensive overview of representative metal nanocomposites with synergistic properties and their recent (2017-2022) application in the context of electrochemical sensing as a means of detecting specific antibiotic, tuberculostatic, analgesic, antineoplastic, antipsychotic, and antihypertensive drugs. In discussing these applications, we further explore a variety of testing-related principles, fabrication approaches, characterization techniques, and parameters associated with the sensitivity and selectivity of these sensor platforms before surveying the future outlook regarding the fabrication of next-generation (bio)sensor platforms for use in pharmaceutical analysis.

Gold Nanomaterials and their Composites as Electrochemical Sensing Platforms for Nitrite Detection

Nitrite is one of the abundant toxic components existing in the environment and is likely to have a great potential to affect human health badly. For that reason, it has become crucial to build a reliable nitrite detection method. In recent years, several nitrite monitoring systems have been proposed. Compared with traditional analytical strategies, the electrochemical approach has a bunch of advantages, including low cost, rapid response, easy operation, simplicity, etc. In this case, noble metal nanomaterials, especially Au-based nanomaterials, have attracted attention in electrode modification because of higher catalytic activity, facile mass transfer, and broad active area for determining nitrite. This review is based on the state-of-the-art, which includes a variety of nanomaterials that have been coupled with AuNPs for the creation of nanocomposites, and the construction as well as development of electrochemical sensors for nitrite detection over the last few years (2016-2022). A background study on synthesizing different morphological AuNPs and nanocomposites has also been introduced. The fabrication methods and sensing capabilities of modified electrodes are given special consideration.

Nanomaterials Used in Fluorescence Polarization Based Biosensors

Fluorescence polarization (FP) has been applied in detecting chemicals and biomolecules for early-stage diagnosis, food safety analyses, and environmental monitoring. Compared to organic dyes, inorganic nanomaterials such as quantum dots have special fluorescence properties that can enhance the photostability of FP-based biosensing. In addition, nanomaterials, such as metallic nanoparticles, can be used as signal amplifiers to increase fluorescence polarization. In this review paper, different types of nanomaterials used in in FP-based biosensors have been reviewed. The role of each type of nanomaterial, acting as a fluorescent element and/or the signal amplifier, has been discussed. In addition, the advantages of FP-based biosensing systems have been discussed and compared with other fluorescence-based techniques. The integration of nanomaterials and FP techniques allows biosensors to quickly detect analytes in a sensitive and cost-effective manner and positively impact a variety of different fields including early-stage diagnoses.

Advances and emerging challenges in MXenes and their nanocomposites for biosensing applications

Two-dimensional materials have unique properties and their better functionality has created new paradigms in the field of sensing. Over the past decade, a new family of 2D materials known as MXenes has emerged as a promising material for numerous applications, including biosensing. Their metallic conductivity, rich surface chemistry, hydrophilicity, good biocompatibility, and high anchoring capacity for biomaterials make them an attractive candidate to detect a variety of analytes. Despite such notable properties, there are certain limitations associated with them. This review aims to present a detailed survey of MXene's synthesis; in particular, their superiority in the field of biosensing as compared to other 2D materials is addressed. Their low oxidative stability is still an open challenge, and recent investigations on MXene's oxidation are summarized. The hexagonal stacking network of MXenes acts as a distinctive matrix to load nanoparticles, and the embedded nanoparticles can bind an excess number of biomolecules (e.g., antibodies) thereby improving biosensor performance. We will also discuss the synthesis and corresponding performance of MXenes nanocomposites with noble metal nanoparticles and magnetic nanoparticles. Furthermore, Nb and Ti2C-based MXenes, and Ti3C2-MXene sandwich immunoassays are also reviewed in view of their importance. Different aspects and challenges associated with MXenes (from their synthesis to final applications) and the future perspectives described give new directions to fabricate novel biosensors.

PtBi-β-CD-Ce6 Nanozyme for Combined Trimodal Imaging-Guided Photodynamic Therapy and NIR-II Responsive Photothermal Therapy

Combined photothermal/photodynamic therapy is a promising strategy to achieve an enhanced anticancer effect. However, hypoxia is one of the representative characteristics of the microenvironment of solid tumors, which not only attenuates the therapeutic effects but also promotes tumor invasion and metastasis. Herein, a PtBi-β-CD-Ce6 nanoplatform for the generation of sustained O2 was constructed for more effective tumor therapy. In detail, the catalase (CAT)-like nanozyme, PtBi, which could decompose H2O2 to produce O2, was modified with β-cyclodextrin (β-CD). O2 would be converted into 1O2 by PtBi-β-CD-Ce6 for enhanced photodynamic therapy (PDT) under 650 nm laser irradiation. In addition, by reason of excellent absorption in the near-infrared-II (NIR-II) region, PtBi-β-CD-Ce6 was used for photoacoustic imaging (PA) and photothermal imaging (PT)-guided photothermal therapy (PTT) in the NIR-II biowindow. Furthermore, PtBi-β-CD-Ce6 could be elected to serve as a contrast agent for X-ray computed tomography (CT) imaging due to the apparent X-ray attenuation capability of the Pt and Bi elements themselves. Therefore, by integrating the advantages of overcoming the hypoxia function and photothermal effect into a single nanoplatform, PtBi-β-CD-Ce6 showed an immense possibility in multimodal imaging-guided combined PDT/PTT.

Advanced Functionalized CeO2/Al2O3 Nanocomposite Sensor for Determination of Opioid Medication Tramadol Hydrochloride in Pharmaceutical Formulations

BACKGROUND

The exceptional characteristics of cerium oxide (CeO₂) and aluminum oxide (Al₂O₃) nanoscales have inspired significant attention to those nanocomposites as possible electroactive resources for applications of sensing and biosensing.

METHODS

In this research, an innovative new factionalized CeO₂/Al₂O₃ nanocomposite membrane sensor was presented to assess tramadol hydrochloride (TRD) in marketable products.

RESULTS

Tramadol-phosphomolybdate (TRD-PM) was formed by mixing tramadol hydrochloride and phosphomolybdic acid (PMA) in the attendance of polymeric matrix and o-nitrophenyloctyl ether solvent mediator. With 1.0 × 10^-10-1.0 × 10^-2 mol L^-1 as a range of linearity and E_mV = (57.567 ± 0.2) log [TRD] + 676.29 as a regression equation, the functionalized sensor using TRD-PM-CeO₂/Al₂O₃ nanocomposite showed great selectivity and sensitivity for the discriminating and measurement of TRD. Using the regression equation E_mV = (52.143 ± 0.4) log [TRD] + 431.45, the unmodified coated wire sensor of TRD-PM, on the other hand, showed a Nernstian response between 1.0 × 10^-6 and 1.0 × 10^-2 mol L^-1, Using the methodology's specified guidelines, the proposed improved potentiometric system was validated against several criteria.

CONCLUSION

The suggested method is suitable for the determination of TRD in its products.

Using bimetallic Au/Cu nanoplatelets for construction of facile and label-free inner filter effect-based photoluminescence sensing platform for sarcosine detection

Herein, we report a facile and label-free method for sensitive and specific determination of prostate cancer biomarker sarcosine via using photoluminescent bimetallic Au/Cu nanoplatelets (AuCu NPs) to construct an inner filter effect (IFE)-based photoluminescence (PL) sensing platform. The AuCu NPs were formed by the cysteine-induced co-reduction reaction, which displayed bright PL with an emission peak at 560 nm. Meanwhile, the Cu(I) doping caused a maximum 25-fold enhancement of quantum yield (QY), compared with the native Au(I) complexes, i.e., from 0.85 to 21.5%. By integrating the AuCu NPs with p-phenylenediamine (PPD) oxidation reaction, an IFE-based sensor for sarcosine detection was constructed. In this method, sarcosine is oxidized under the catalysis of sarcosine oxidase (SOx) to yield H₂O₂. The latter further oxidizes PPD to form 2,5-diamino-N,N'-bis(p-aminophenyl)-l,4-benzoquinone di-imine (PPDox) in the presence of horseradish peroxidase (HRP). The UV-vis absorption spectrum of the PPDox can overlap well with the excitation and emission spectra of the AuCu NPs, resulting in the efficient quenching of the AuCu NPs via the IFE effect. Therefore, this IFE-based AuCu NPs/SOx/PPD/HRP sensing platform can be used for highly sensitive and specific sensing of sarcosine. The sensing platform showed two linear regions of the PL intensity of the AuCu NPs versus the concentration of sarcosine in the range of 0.5-5 μM and 5-100 μM with a detection limit (LOD) of 0.12 μM (S/N = 3). Furthermore, this IFE-based sensing platform could be developed into a paper-based biosensor for simple, instrument-free, and visual detection of sarcosine.

Bimetallic Nanomaterials-Based Electrochemical Biosensor Platforms for Clinical Applications

Diabetes is a foremost health issue that results in ~4 million deaths every year and ~170 million people suffering globally. Though there is no treatment for diabetes yet, the blood glucose level of diabetic patients should be checked closely to avoid further problems. Screening glucose in blood has become a vital requirement, and thus the fabrication of advanced and sensitive blood sugar detection methodologies for clinical analysis and individual care. Bimetallic nanoparticles (BMNPs) are nanosized structures that are of rising interest in many clinical applications. Although their fabrication shares characteristics with physicochemical methodologies for the synthesis of corresponding mono-metallic counterparts, they can display several interesting new properties and applications as a significance of the synergetic effect between their two components. These applications can be as diverse as clinical diagnostics, anti-bacterial/anti-cancer treatments or biological imaging analyses, and drug delivery. However, the exploitation of BMNPs in such fields has received a small amount of attention predominantly due to the vital lack of understanding and concerns mainly on the usage of other nanostructured materials, such as stability and bio-degradability over extended-time, ability to form clusters, chemical reactivity, and biocompatibility. In this review article, a close look at bimetallic nanomaterial based glucose biosensing approaches is discussed, concentrating on their clinical applications as detection of glucose in various real sample sources, showing substantial development of their features related to corresponding monometallic counterparts and other existing used nanomaterials for clinical applications.

A sandwich-type electrochemical immunosensor based on Au-rGO composite for CA15-3 tumor marker detection

A sensitive detection of carbohydrate antigen 15-3 (CA15-3) levels may allow for early diagnosis and monitoring the treatment of breast cancer, but this can only be made in routine clinical practice if low-cost immunosensors are available. In this work, we developed a sandwich-type electrochemical immunosensor capable of rapid detection of CA15-3 with an ultra-low limit of detection (LOD) of 0.08 fg mL^-1 within a wide linear concentration range from 0.1 fg mL^-1 to 1 µg mL^-1. The immunosensor had a matrix of a layer-by-layer film of Au nanoparticles and reduced graphene oxide (Au-rGO) co-electrodeposited on screen-printed carbon electrodes (SPCE). The high sensitivity was achieved by using secondary antibodies (Ab₂) labeled with horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H₂O₂) as signal amplifiers, and hydroquinone (HQ) was used as an electron mediator. The immunosensor was selective for CA15-3 in human serum and artificial saliva samples, robust, and stable to permit storage at 4 °C for more than 30 days. With its high performance, the immunosensor may be incorporated into future point-of-care (POC) devices to determine CA15-3 in distinct biological fluids, including in blood and saliva samples.