Chemiluminescence detection of reactive oxygen species generation and potential environmental applications

Pseudo-water-soluble Fe2O3 as Nanozyme catalyzed chemiluminescent reaction for detection of brilliant blue in gelatin and beverages

Converting solid iron oxide nanoparticles into a "pseudo-water-soluble" form before applying them to chemiluminescent reactions leads to enhance the chemiluminescence intensity. Using 8-hydroxyquinoline as a colloidal agent, a new, fast, and simple method of synthesizing pseudo-water-soluble Fe2O3 nanoparticles was developed. SEM, VSM, SAED, HRTEM, XRD, FTIR, and EDS techniques were used to characterize the synthesized Fe2O3 nanoparticles. Fe2O3 nanoparticles synthesized in this study have superior peroxidase-like activity (POD-like) and are stable under a wide range of pH and temperature. The chemiluminescence reaction of luminol-H2O2 is intensified and accelerated by a colloidal solution of Fe-nanoparticles/8-hydroxyquinoline. Reverse-flow injection analysis was employed to determine brilliant blue. A chemiluminescent sensing method based on iron oxide nanozymes was utilized for sensitive detection of the brilliant blue synthetic dye, achieving a limit of detection of 0.06 mg/L and a dynamic linear range of 0.1 to 50 mg/L. The recovery and relative standard deviations of real samples were found to be 97.83-99.93% and 0.09-3.07%, respectively. An analysis of a sample, from injection to obtaining the maximum peak, could be performed in less than one minute.

A New Fluorene-Based Fluorescent Probe for Recognition of Hypochlorite Ions and its Applications

Oxidative stress is a trigger for many diseases and occurs with the unstable hypochlorite (ClO-), known as one of the reactive oxygen species (ROS) in organisms. Then, HOCI is acknowledged as an oxidizing species that eliminates a variety of environmental pollutants. Hence, the development of novel methodologies for the selective and precise identification of HOCl/ ClO- is considered to be of utmost importance. In this study, the design, characterization, and applications of a fluorene-based fluorescent probe (FHBP) dependent on the ESIPT mechanism with a "turn-on" response for the sensitive/selective determination of ClO- against other competing samples were reported. The experimental results indicated that the detection limit for ClO-could be quantitatively determined by the probe to be 8.2 × 10-7 M. The binding constant of the probe FHBP with ClO- was computed as 9.75 × 103 M-1. In addition, the response time of FHBP was appointed to be 30 s, indicating a rapid reaction with ClO-. It has also been demonstrated that this probe can be successfully used for the detection of ClO- on filter papers, TLC sheets, cotton swabs, and real samples.

A fluorescence probe with targeted mitochondria for detecting hydrogen peroxide in vitro and in diabetic mice

We designed and prepared probe W-1 for the detection of H2O2. W-1 showed excellent selectivity for H2O2 and was accompanied by colorimetric signal changes. The excellent linear relationship between fluorescence intensity and H2O2 concentration (0-100 μM) provided favorable conditions for its quantitative detection. In addition, the combination of portable test strips with a smartphone platform provided great convenience for on-site visual detection of H2O2. Moreover, W-1 possessed targeting mitochondria property and could be applied to image the exogenous and endogenous H2O2 in cells to distinguish normal cells and cancer cells. Lastly, W-1 was used for monitoring the H2O2 fluctuation of the diabetic process in mice, and the results showed an increase in H2O2 levels in diabetes. Therefore, the probe provided a tool for understanding the pathological and physiological mechanisms of diabetes by imaging H2O2.

Field Quantification of Hydroxyl Radicals by Flow-Injection Chemiluminescence Analysis with a Portable Device

Hydroxyl radical (•OH) is a powerful oxidant abundantly found in nature and plays a central role in numerous environmental processes. On-site detection of •OH is highly desirable for real-time assessments of •OH-centered processes and yet is restrained by a lack of an analysis system suitable for field applications. Here, we report the development of a flow-injection chemiluminescence analysis (FIA-CL) system for the continuous field detection of •OH. The system is based on the reaction of •OH with phthalhydrazide to generate 5-hydroxy-2,3-dihydro-1,4-phthalazinedione, which emits chemiluminescence (CL) when oxidatively activated by H2O2 and Cu3+. The FIA-CL system was successfully validated using the Fenton reaction as a standard •OH source. Unlike traditional absorbance- or fluorescence-based methods, CL detection could minimize interference from an environmental medium (e.g., organic matter), therefore attaining highly sensitive •OH detection (limits of detection and quantification = 0.035 and 0.12 nM, respectively). The broad applications of FIA-CL were illustrated for on-site 24 h detection of •OH produced from photochemical processes in lake water and air, where the temporal variations on •OH productions (1.0-12.2 nM in water and 1.5-37.1 × 107 cm-3 in air) agreed well with sunlight photon flux. Further, the FIA-CL system enabled field 24 h field analysis of •OH productions from the oxidation of reduced substances triggered by tidal fluctuations in coastal soils. The superior analytical capability of the FIA-CL system opens new opportunities for monitoring •OH dynamics under field conditions.

Online chemiluminescence determination of the hydroxyl radical using coumarin as a probe

The hydroxyl radical (˙OH) is one of the strongest oxidizing species, which can react with a variety of organic and inorganic chemicals. Although ˙OH is widely used for degradation of environmental pollutants, detection of ˙OH remains a major challenge due to its high reactivity and short lifetime, especially online detection. In this study, a novel method for online detection of ˙OH by flow oxidization chemiluminescence (F-OCL) using coumarin as a probe was established. The concentrations of ˙OH determined by this new method were consistent with those determined by HPLC analysis. Because the new method has a short response speed, it was successfully used to quantify the dynamic change of ˙OH in the TiO2 photocatalytic process and Fenton reaction in real time. Furthermore, a combination of two chemiluminescence systems was developed to track the dynamics of ˙OH and hydrogen peroxide (H2O2) in homogeneous or heterogeneous Fenton reactions occurring in soil slurry. The proposed method and strategy have good application potential in online ROS monitoring of both natural and engineered systems.

Europium-Functionalized Graphitic Carbon Nitride for Efficient Chemiluminescence Detection of Singlet Oxygen

Enhancing the sensitivity and selectivity of chemiluminescence (CL) sensors for detecting chemical species in complex samples poses a significant challenge in nanoparticle surface engineering. Graphitic carbon nitride (CN) shows promise but suffers from weak CL intensity and unknown luminescence mechanisms. In this study, we propose a nitrogen defect strategy to enhance the CL efficiency of europium-functionalized graphitic carbon nitride (Eu-CNNPs). By controlling the dosage of the europium modification, we can adjust the nitrogen defect content to reduce the energy gap and improve the CL performance. Remarkably, Eu-CNNPs with rich nitrogen defects exhibit strong chemiluminescence emission specifically for singlet oxygen (1O2) without responding to other reactive oxygen species (ROS). Building upon this finding, we developed a direct, selective, and sensitive CL sensing platform for 1O2 in PM2.5 and monitored 1O2 production in photosensitizers without interference from metal ions. Through extensive experiments, we attribute the 1O2-driven CL response to the presence of abundant nitrogen defects in the CN material, accelerating electron transfer and yielding a high generation of 1O2. Furthermore, chemiluminescence resonance energy transfer (CRET) between (1O2)2* (1O2 dimeric aggregate) and Eu-CNNPs contributes to strong CL emission. This work provides insights into enhancing the CL performance of CN and offers new possibilities for advancing the practical analysis of nanomaterials using the intriguing mechanism of nitrogen defects.

Hierarchically Structured and Highly Dispersible MOF Nanozymes Combining Self-Assembly and Biomineralization for Sensitive and Persistent Chemiluminescence Immunoassay

Metal-organic frameworks (MOF) are promising candidates for the construction of artificial nanozymes and have found applications in many fields. However, the preparation of nanosized MOF materials with high performance and good dispersibility is still a big challenge and is in great demand as signal labels for immunoassays. In this work, hierarchically structured and highly dispersible MOF nanoparticles were facilely prepared in a one-pot method. Self-assembled micelles from PEGylated hematin were used as structured templates to mediate the formation of zeolitic imidazole framework-8 (ZIF-8) nanoparticles in aqueous solution. The encapsulation of micelles in ZIF-8 frameworks produces well-dispersed nanoparticles and generates dual-confinement effects for catalytic hematin. Owing to the hierarchical structures, the formed MOF nanozymes show enhanced peroxidase-like activity and enable persistent chemiluminescence behaviors for the luminol system. Sandwich-type chemiluminescence immunoassays for carcinoembryonic antigen (CEA) were proposed using MOF nanozymes as signal labels, and good analytical performances were achieved. The combination of self-assembly and biomineralization may open new avenues for the development of MOF nanomaterials.

Much Stronger Chemiluminescence of 9-Mesityl-10-methylacridinium Ion than Lucigenin at Neutral Conditions for Co2+ Detection

9-Mesityl-10-methylacridinium ion (Acr+-Mes) is a donor-acceptor molecule with a much longer lifetime and a higher energy electron transfer excited state than natural photosynthetic reaction centers. Unlike lucigenin with a coplanar geometry, Acr+-Mes has an orthogonal geometry. There is no π conjugation between Acr+ and Mes. Due to its special electron donor-acceptor structure, it does not rely on strong alkalinity to generate an electron transfer state like lucigenin, which makes it possible to achieve chemiluminescence (CL) under weakly alkaline or neutral conditions. In this study, we report Acr+-Mes CL for the first time. Acr+-Mes generates about 400 times stronger CL intensity than lucigenin under neutral conditions (pH = 7) using KHSO5 as the coreactant. Moreover, Co2+ can enhance Acr+-Mes/KHSO5 CL remarkably. Acr+-Mes/KHSO5 CL enables Co2+ detection with a linear range of 0.5-500 nM and a limit of detection of 28 pM (S/N = 3). This method was tested for the detection of Co2+ in lake water, and the standard recovery rate of 96.8-107% was achieved. This study provides a new way to develop efficient CL systems in neutral solutions.

Zirconium dioxide as electrochemiluminescence emitter for D-dimer determination based on dual-quenching sensing strategy

The ECL emission of simple and stable zirconium dioxide nanomaterials has always been a blank slate in the ECL sensors field. In this work, zirconium dioxide (ZrO₂)-titanium dioxide (TiO₂)-gold nanoparticle (AuNPs) composite (ZT-Au), a novel self-enhanced ECL emitter, was introduced the system of dual-quenching ECL immunosensor. The anodic luminescence of ZrO₂ in the system of tripropylamine (TPrA) as a co-reagent was first reported and explored. Meanwhile, TiO₂ was designed into the ECL scheme as a co-reaction accelerator to form the ZrO₂/TPrA/TiO₂ ternary system, which can efficiently amplify the ECL signal of the emitter. In addition, cuprous oxide-triaminophenol (Cu₂O-APF) as the quencher was devoted to the dual-quenching sensing strategy. The dual-quenching mechanism that effectively boosted the immunosensor sensitivity was adequately investigated and conjectured in this paper. The sensing model based on the luminophor ZT-Au and the quencher Cu₂O-APF was utilized for the detection of D-dimer, a reliable marker for the diagnosis and evaluation of thrombotic diseases. The short peptide ligands NARKFYKGC (NFC) with efficient biological affinity were used to site-directionally capture antibodies for adequately protecting the activity of antigen binding sites during the construction of the immunosensor. The implemented immunosensor was equipped with a broad linear range of 0.01-500 ng/mL and a low detection limit of 3.6 pg/mL. The original methodology opens up the field of vision for the detection of additional biomarkers.

Recent Advances in Nanomaterial-Based Chemiluminescence Probes for Biosensing and Imaging of Reactive Oxygen Species

Reactive oxygen species (ROS) play important roles in organisms and are closely related to various physiological and pathological processes. Due to the short lifetime and easy transformation of ROS, the determination of ROS content in biosystem has always been a challenging task. Chemiluminescence (CL) analysis has been widely used in the detection of ROS due to its advantages of high sensitivity, good selectivity and no background signal, among which nanomaterial-related CL probes are rapidly developing. In this review, the roles of nanomaterials in CL systems are summarized, mainly including their roles as catalysts, emitters, and carriers. The nanomaterial-based CL probes for biosensing and bioimaging of ROS developed in the past five years are reviewed. We expect that this review will provide guidance for the design and development of nanomaterial-based CL probes and facilitate the wider application of CL analysis in ROS sensing and imaging in biological systems.

Elucidation of an Aggregate Excited State in the Electrochemiluminescence and Chemiluminescence of a Thermally Activated Delayed Fluorescence (TADF) Emitter

The electrochemistry, electrochemiluminescence (ECL), and chemiluminescence (CL) properties of a thermally activated delayed fluorescence (TADF) emitter 4,4'-(1,2-dihydroacenaphthylene-5,6-diyl)bis(N,N-diphenylaniline) (TPA-ace-TRZ) and three of its analogues were investigated. TPA-ace-TRZ exhibits both (a) delayed onset of ECL and (b) long-persistent luminescence, which we have attributed to the formation of an aggregate excited state in excimer or exciplex form. The evidence of this aggregate excited state was consistent across ECL annihilation and coreactant pathways as well as in CL. The absolute ECL efficiency of TPA-ace-TRZ using benzoyl peroxide (BPO) as a coreactant was found to be 0.028%, which was 9-fold stronger than the [Ru(bpy)₃]²⁺/BPO reference coereactant system. Furthermore, the absolute CL quantum efficiency of TPA-ace-TRZ was determined to be 0.92%. The performance and flexibility of the TADF emitter TPA-ace-TRZ under these various emissive pathways are highly desirable toward applications in sensing, imaging, and light-emitting devices.

A novel enzyme-free long-lasting chemiluminescence system based on a luminol functionalized β-cyclodextrin hydrogel for sensitive detection of H2O2 in urine and cells

A novel long-lasting chemiluminescent (CL) hydrogel (β-CD@luminol-Co²⁺) was synthesized by embedding luminol and cobalt ions (Co²⁺) into β-cyclodextrin (β-CD) through non-covalent interactions. Due to its porous structure and viscosity, the synthesized β-CD@luminol-Co²⁺ hydrogel exhibited long-lasting CL properties and can emit light for 12 h under both alkaline and neutral conditions. In addition, the CL intensities of β-CD@luminol-Co²⁺ were linear with the logarithm of the hydrogen peroxide (H₂O₂) concentration in the range of 1.0 × 10^-11-1.0 × 10^-7 M, and the limit of detection (LOD) was 0.63 × 10^-11 M and 0.85 × 10^-11 M under alkaline and neutral conditions, respectively. On this basis, an enzyme-free CL sensor based on β-CD@luminol-Co²⁺ was fabricated for the sensitive detection of H₂O₂ in human urine samples under alkaline conditions, and showed good accuracy and recovery. Since β-CD@luminol-Co²⁺ showed good CL properties under neutral conditions, it can be applied to detect H₂O₂ in cells. In order to prolong the emission wavelength of β-CD@luminol-Co²⁺ for better cell imaging, β-CD@luminol-FL-Co²⁺ was prepared by adding fluorescein (FL) to β-CD@luminol-Co²⁺. The as-prepared β-CD@luminol-FL-Co²⁺ also displayed long-lasting CL properties and showed a linear relationship with H₂O₂ concentrations. In addition, the maximum emission wavelength of β-CD@luminol-FL-Co²⁺ was 520 nm, which was red-shifted by 95 nm compared with β-CD@luminol-Co²⁺. The methyl thiazolyl tetrazolium (MTT) assay results and confocal microscopy images illustrated that β-CD@luminol-FL-Co²⁺ had low toxicity and can be taken up by A549 cells. Finally, β-CD@luminol-FL-Co²⁺ was successfully applied for CL imaging and detection of intracellular H₂O₂ in A549 cells under neutral conditions. This enzyme-free long-lasting CL system with high sensitivity can also be extended to real-time monitoring of H₂O₂in vivo.

A Novel Chemiluminescent Method for Efficient Evaluation of Heterogeneous Fenton Catalysts Using Cigarette Tar

The evaluation of the catalytic capacity of catalysts is indispensable research, as catalytic capacity is a crucial factor to dictate the efficiency of heterogeneous Fenton catalysis. Herein, we obtained cigarette tar-methanol extracts (CTME) by applying methanol to cigarette tar and found that CTME could cause CL reactions with Fe²⁺/H₂O₂ systems in acidic, neutral, and alkaline media. The CL spectrum experiment indicated that the emission wavelengths of the CTME CL reaction with Fe²⁺/H₂O₂ systems were about 490 nm, 535 nm, and 590 nm. Quenching experiments confirmed that hydroxyl radicals (•OH) were responsible for the CL reaction for CTME. Then the CL property of CTME was applied in-situ to rapidly determine the amounts of •OH in tetrachloro-1,4-benzoquinone (TCBQ)/H₂O₂ system in acidic, neutral and alkaline media, and the CL intensities correlated the best (R² = 0.99) with TCBQ concentrations. To demonstrate the utility of the CTME CL method, the catalytic capacity of different types and concentrations of catalysts in heterogeneous Fenton catalysis were examined. It was found that the order of CL intensities was consistent with the order of degradation efficiencies of Rhodamine B, indicating that this method could distinguish the catalytic capacity of catalysts. The CTME CL method could provide a convenient tool for the efficient evaluation of the catalytic capacity of catalysts in heterogeneous Fenton catalysis.

Advances, applications, and limitations of portable and rapid detection technologies for routinely encountered foodborne pathogens

Traditional foodborne pathogen detection methods are highly dependent on pre-treatment of samples and selective microbiological plating to reliably screen target microorganisms. Inherent limitations of conventional methods include longer turnaround time and high costs, use of bulky equipment, and the need for trained staff in centralized laboratory settings. Researchers have developed stable, reliable, sensitive, and selective, rapid foodborne pathogens detection assays to work around these limitations. Recent advances in rapid diagnostic technologies have shifted to on-site testing, which offers flexibility and ease-of-use, a significant improvement from traditional methods' rigid and cumbersome steps. This comprehensive review aims to thoroughly discuss the recent advances, applications, and limitations of portable and rapid biosensors for routinely encountered foodborne pathogens. It discusses the major differences between biosensing systems based on the molecular interactions of target analytes and biorecognition agents. Though detection limits and costs still need further improvement, reviewed technologies have high potential to assist the food industry in the on-site detection of biological hazards such as foodborne pathogens and toxins to maintain safe and healthy foods. Finally, this review offers targeted recommendations for future development and commercialization of diagnostic technologies specifically for emerging and re-emerging foodborne pathogens.

Chemiluminescence of doped carbon dots with H2O2-KMnO4 system for the detection of Cu2+ and tannin

The carbon dots doped with chlorine and phosphorus (CDs-Cl,P) were used as chemiluminescence (CL) reagent for the sensitive detection of copper ions (Cu²⁺) and tannin (TA). The CDs-Cl,P was found to strongly enhance the reaction of H₂O₂ and KMnO₄ in alkaline medium. The enhanced CL behavior of CDs-Cl,P was investigated and it was found that some radicals such as ^•OH, ^•O₂^- and ¹O₂ appeared in the CL reaction process. The participation of Cu²⁺ could result in an enhanced CL intensity of the CDs-Cl,P-H₂O₂-KMnO₄ system due to the Cu²⁺-catalyzed decomposition of H₂O₂ resulting in more ^•OH generation. Therefore, the CDs-Cl,P-H₂O₂-KMnO₄ system was used to selectively quantify Cu²⁺ in solution by CL emission. A linear increase was observed between CL intensity and Cu²⁺ concentration. The CDs-Cl,P-H₂O₂-KMnO₄ system allowed the detection of Cu²⁺ down to lower concentration of 0.1 μM with a linear range of 0.2-60.0 μM. Moreover, TA as a common polyphenolic compound, could selectively decrease the CL signal of the CDs-Cl,P-H₂O₂-KMnO₄-Cu²⁺ system due to its complexation with Cu²⁺. On this basis, the CL assay for TA was also developed. The detection limit was 0.14 μM and the linear range was from 5.0 μM to 100.0 μM. The proposed method was successfully applied to the determination of Cu²⁺ and TA in water, rice dumplings leaves, sodium copper chlorophyllin and wine samples with satisfactory results.

Cationic AIEgen micelle-improved chemiluminescent H2O2 assay by integrating reactant approach and CRET

The enhancement of chemiluminescence (CL) intensity is significant in the development of chemiluminescent detection systems with improved sensitivity. In this study, a cationic surfactant with an intrinsic aggregation-induced emission emitter (AIEgen) has been applied to boost the CL signal of the horseradish peroxidase-luminol-H₂O₂ system. The formed cationic AIEgen micelles enhance the CL signal in two ways: the electrostatic attraction-mediated enrichment and approach of reactants and the high CRET efficiency between excited luminol radicals and AIEgen in the surfactant backbone. As a result, strong CL intensity is produced. Rapid and sensitive H₂O₂ detection is realized through the proposed cationic AIEgen micelle-containing chemiluminescent system with a limit of detection of 100 nM. The favourable selectivity over other possible interferents including metal ions and anions is due to the specific chemical reaction. Practical H₂O₂ analysis of thawing water samples with high accuracy using the proposed chemiluminescent platform is realized and is consistent with standard methods.

Utilizing dual carriers assisted by enzyme digestion chemiluminescence signal enhancement strategy simultaneously detect tumor markers CEA and AFP

To measure two tumor biomarkers, alpha-fetoprotein (AFP) and carcinoembryonic antigen (CEA), a dual-carrier CL sensor with restriction enzyme digestion (Exo I) and aptamer technology utilizing gold nanoparticles (hydroxylamine amplification) and horseradish peroxidase (HRP) as the CL signal enhancement in the sensing strategy was formed. These nanoparticles and nano-enzyme were precisely detected and tagged to the appropriate position attributable to the particular recognition of biotin and streptavidin. In this sensing strategy, target markers were further enriched and recognized sensitively by CL following enrichment, and matching strong chemical signals were collected under luminol catalysis, allowing for marker identification. For CEA (0.1-80 ng/mL) and AFP (2-500 ng/mL), the proposed method has a large linear range, with detection limits of 36.6 pg/mL and 0.94 ng/mL, respectively.

A portable NIR fluorimeter directly quantifies singlet oxygen generated by nanostructures for Photodynamic Therapy

This paper reports on the setting up and calibration of a portable NIR fluorimeter specifically developed for quantitative direct detection of the highly reactive singlet oxygen (¹O₂) chemical specie, of great importance in Photodynamic therapies. This quantification relies on the measurement of fluorescence emission of ¹O₂, which is peaked in the near-infrared (NIR) at λ=1270nm. In recent years, several nanostructures capable of generating reactive oxygen species (ROS) when activated by penetrating radiation (X-rays, NIR light) have been developed to apply Photodynamic Therapy (PDT) to tumours in deep tissue, where visible light cannot penetrate. A bottleneck in the characterization of these nanostructures is the lack of a fast and reliable technique to quantitatively assess their performances in generating ROS, and in particular ¹O₂. For instance, the widely used PDT "Singlet Oxygen Sensor Green" kit suffers from self-activation under X-ray irradiation. To solve this difficulty, we propose here direct detection of ¹O₂ by spectroscopic means, using an apparatus developed by us around a recent thermoelectrically-cooled InGaAs single photon avalanche photodiode (SPAD). The SPAD is coupled to a custom-made integrating sphere designed for use under irradiation with high-energy X-ray beams from clinical Radiotherapy sources. We determine the detection threshold for our apparatus, which turns to be ∼9·10⁸¹O₂ in realistic experimental condition and for measurements extending to 1 min of integration. After calibrations on standard photosensitizers, we demonstrate the potentiality of this instrument characterizing some photosensitizing nanostructures developed by us.

Electrochemical strategies for the detection of cTnI

Acute myocardial infarction (AMI) is the main cause of death from cardiovascular diseases. Thus, early diagnosis of AMI is essential for the treatment of irreversible damage from myocardial infarction. Traditional electrocardiograms (ECG) cannot meet the specific detection of AMI. Cardiac troponin I (cTnI) is the main biomarker for the diagnosis of myocardial infarction, and the detection of cTnI content has become particularly important. In this review, we introduced and compared the advantages and disadvantages of various cTnI detection methods. We focused on the analysis and comparison of the main indicators and limitations of various cTnI biosensors, including the detection range, detection limit, specificity, repeatability, and stability. In particular, we pay more attention to the application and development of electrochemical biosensors in the diagnosis of cardiovascular diseases based on different biological components. The application of electrochemical microfluidic chips for cTnI was also briefly introduced in this review. Finally, this review also briefly discusses the unresolved challenges of electrochemical detection and the expectations for improvement in the detection of cTnI biosensing in the future.