Changes in the temporomandibular joint after mandibular setback surgery in monkeys: intraoral vertical versus sagittal split ramus osteotomy

Changes in strain energy density in the temporomandibular joint disk after sagittal split ramus osteotomy using a computed tomography-based finite element model

PURPOSE

We evaluated the changes in the strain energy density (SED) in the temporomandibular joint (TMJ) disk after sagittal split ramus osteotomy (SSRO) at three time points. A finite element model (FEM) based on real patient-based computed tomography (CT) data was used to examine the effect of SSRO on the TMJ.

METHODS

Measurements of the condylar position and angulation in CT images and FEM analyses were performed for 17 patients scheduled to undergo SSROs at the following time points: before surgery, immediately after surgery, and 1 year after surgery. SED on the entire disk was calculated at each of the three time points using FEM. Furthermore, the relationship between individual SED values and the corresponding condylar position was also evaluated.

RESULTS

No significant change was observed in the condylar position at the three time points. The FEM analysis showed that SED was the highest and lowest immediately after and 1 year after surgery, respectively. A possible SED distribution imbalance between the left and right joints was improved 1 year after SSRO. Concerning the effect of fossa morphometry and condylar position, wide and deep glenoid fossae and a more posterior condylar position tended to show lower SED.

CONCLUSION

SED in the articular disk temporarily increased after surgery and significantly decreased 1 year after surgery compared with that before surgery. SSRO generally improved the imbalance between the left and right joints. Thus, SSRO, which improves maxillofacial morphology, may also improve components of temporomandibular disorders.

Craniofacial syndromes and class III phenotype: common genotype fingerprints? A scoping review and meta-analysis

Skeletal Class III (SCIII) is among the most challenging craniofacial dysmorphologies to treat. There is, however, a knowledge gap regarding which syndromes share this clinical phenotype. The aims of this study were to: (i) identify the syndromes affected by the SCIII phenotype; (ii) clarify the involvement of maxillary and/or mandibular structures; (iii) explore shared genetic/molecular mechanisms. A two-step strategy was designed: [Step#1] OMIM, MHDD, HPO, GeneReviews and MedGen databases were explored; [Step#2]: Syndromic conditions indexed in [Step#1] were explored in Medline, Pubmed, Scopus, Cochrane Library, WOS and OpenGrey. Eligibility criteria were defined. Individual studies were assessed for risk of bias using the New Ottawa Scale. For quantitative analysis, a meta-analysis was conducted. This scoping review is a hypothesis-generating research. Twenty-two studies met the eligibility criteria. Eight syndromes affected by the SCIII were targeted: Apert syndrome, Crouzon syndrome, achondroplasia, X-linked hypohidrotic ectodermal dysplasia (XLED), tricho-dento-osseous syndrome, cleidocranial dysplasia, Klinefelter and Down syndromes. Despite heterogeneity between studies [p < 0.05], overall effects showed that midface components were affected in Apert and Down Syndromes, lower face in Klinefelter Syndrome and midface and lower face components in XLED. Our review provides new evidence on the craniofacial characteristics of genetically confirmed syndromes exhibiting the SCIII phenotype. Four major regulatory pathways might have a modulatory effect on this phenotype. IMPACT: What does this review add to the existing literature? To date, there is no literature exploring which particular syndromes exhibit mandibular prognathism as a common trait. Through this research, it was possibly to identify the particular syndromes that share the skeletal Class III phenotype (mandibular prognathism) as a common trait highlighting the common genetic and molecular pathways between different syndromes acknowledging their impact in craniofacial development.

Volumetric changes in temporomandibular joint space following trans-oral vertical ramus osteotomy in patients with mandibular prognathism: a one-year follow-up study

This study measured and analyzed chronological changes in temporomandibular joint space volume by compartment following transoral vertical ramus osteotomy (TOVRO) using reconstructed 3-dimensional (3D) images of patients with mandibular prognathism. It included 70 joints of 35 patients who underwent TOVRO between January 2018 and December 2021. Computed tomography (CT) or cone-beam CT (CBCT) was performed before surgery (T0) and at 3 days (T1), 6 months (T2), and 12 months postoperatively (T3). These scans were then analyzed using 3D software. The volumes of the overall (Vjs), anterior (Vajs), posterior (Vpjs), medial (Vmjs), and lateral (Vljs) joint spaces were calculated at each time point. A linear mixed model and repeated-measures covariance pattern with unstructured covariance were used to evaluate significant changes in joint space volume over time. Vjs significantly increased to 134.54 ± 34.28 mm3 at T3 compared to T0 (p < 0.001). Vpjas and Vljs increased by 130.72 ± 10.07 mm3 and 109.98 ± 7.52 mm3 at T3 compared to T0, respectively (p < 0.001). However, no significant difference was observed between T0 and T2 in Vajs and Vmjs (p = 0.9999). The observed volume increases in Vpjs and Vljs appeared to contribute to the overall Vjs increase.

3D Printing Experimental Validation of the Finite Element Analysis of the Maxillofacial Model

Contacts used in finite element (FE) models were considered as the best simulation for interactions in the temporomandibular joint (TMJ). However, the precision of simulations should be validated through experiments. Three-dimensional (3D) printing models with the high geometric and loading similarities of the individuals were used in the validation. This study aimed to validate the FE models of the TMJ using 3D printing models. Five asymptomatic subjects were recruited in this study. 3D models of mandible, disc, and maxilla were reconstructed according to cone-beam CT (CBCT) image data. PLA was chosen for 3D printing models from bottom to top. Five pressure forces corresponding to the central occlusion were applied to the 3D printing models. Ten strain rosettes were distributed on the mandible to record the horizontal and vertical strains. Contact was used in the FE models with the same geometries, material properties, loadings, and boundary conditions as 3D printing models to simulate the interaction of the disc-condyle, disc-temporal bone, and upper-lower dentition. The differences of the simulated and experimental results for each sample were less than 5% (maximum 4.92%) under all five loadings. In conclusion, it was accurate to use contact to simulate the interactions in TMJs and upper-lower dentition.

Effect of sagittal split ramus osteotomy on morphologic parameters of temporomandibular joint in patients with mandibular prognathism

The purpose of this study was to evaluate the change in three-dimensional morphology and clinical symptoms of temporomandibular joint (TMJ) in class III dentofacial deformity patients postoperatively for 6 months after sagittal split ramus osteotomy (SSRO).Seventeen patients with skeletal Class III malocclusion and 10 asymptomatic volunteers (classified as Control group) were recruited for the study and underwent cone-beam computed tomography scanning. The geometries of the maxilla and mandible were reconstructed using MIMICS (Materialise, Leuven, Belgium). The morphologic measurements of the patients' TMJs were done before surgery and at 6-month follow-up - named as Pre and Post groups, respectively.The joint spaces (medial joint space, superior joint space, lateral joint space, anterior joint space, and posterior joint space) of the Control group were significantly greater than those of the Pre and Post groups (P < .05), and SSRO did not significantly change the TMJ morphology parameters. Five patients were found to have preoperative temporomandibular disorder (TMD) symptoms, and 3 of them were relieved at 6 months after surgery. Postoperative TMD symptom was observed in 1 patient without preoperative TMD symptom.SSRO did not markedly alter the TMJ morphology of the patients with mandibular prognathism. The effects of SSRO on TMD symptoms should be related to the type of deformity.

Unilateral intraoral vertical ramus osteotomy based on preoperative three-dimensional simulation surgery in a patient with facial asymmetry

Preoperative surgical simulation in orthognathic surgery has progressed in recent years; the movement of the mandible can be anticipated through three-dimensional (3D) simulation surgery before the actual procedure. In this case report, the mandible was moved to the intended postoperative occlusion through preoperative surgical 3D simulation. Right-side condylar movement change was very slight in the surgical simulation, suggesting the possibility of mandibular surgery that included only left-side ramal osteotomy. This case report describes a patient with a mild asymmetric facial profile in which the mandibular menton had been deviated to the right and the lips canted down to the left. Before surgery, three-dimensional surgical simulation was used to evaluate and confirm a position for the condyle as well as the symmetrical postoperative state of the face. Facial asymmetry was resolved with minimal surgical treatment through unilateral intraoral vertical ramus osteotomy on the left side of the mandible. It would be a valuable complement for the reduction of the surgical treatment if one could decide with good predictability when an isolated intraoral vertical ramus osteotomy can be done without a compensatory osteotomy on the contralateral side.

Avoiding condylar displacement after intraoral vertical ramus osteotomy

The intraoral vertical osteotomy is a versatile and simple technique usually applied to correct mandibular prognathism. Its greatest advantages include ease of performance and minimum neurosensory disturbances, whereas maxillomandibular fixation is pointed as its major disadvantage. Another important concern about this technique is condylar displacement, which may lead to temporomandibular dysfunction. Technical notes to avoid condylar luxation are discussed after 15 years of experience using this osteotomy as the technique of choice to correct mandibular prognathism. Three similar cases are presented, where 1 condyle was displaced from the glenoid fossa, resulting in mandibular deviation during function in patients requiring small mandibular setback.