Radiopacity and histological assessment of Portland cement plus bismuth oxide

Influence of the addition of different metal oxides on physicochemical and biological properties of calcium fluorosilicate/PCL bone cement

Calcium silicate cements have been greatly developed in the last decades through different approaches. Among these approaches, the inclusion of antibacterial agents or addition of metal oxides. Herein, calcium silicate cement containing fluorine (CFS) was developed from sodium fluorosilicate precursor for the first time using chemical perception method. Afterwards, metal oxide Bi2O3 or MgO or ZrO2 was individually mixed with CFS powder and blended together using Polycaprolactone polymer (PCL). The cement mixtures were characterized using DSC, XRD, FTIR and SEM/EDX to determine the effect of metal oxide on the pure CFS. Furthermore, mechanical, antibacterial and cell viability properties were evaluated for the developed CFS mixture cements. Moreover, these CFS mixture cements were implanted in male Wistar rats to determine the effect of metal oxides on the rate of bone reformation. The findings of physicochemical and morphological characterization showed no remarkable effects on the pure CFS after mixing with each metal oxide. However, enhanced compressive strengths (up to 104.07N/cm2), antibacterial activity and cell viability (up to 96%) were achieved for the CFS cement mixtures. Finally, the in vivo studies confirmed the biocompatibility of the CFS cement mixtures and especially those mixed with Bi2O3 or ZrO2. Therefore, this study supports that CFS blends with Bi2O3 or ZrO2 can be novel promising cementing materials for bone restoration.

Biocompatibility of Ajwain Oil Combined with Eugenol and Zinc Oxide as a Deciduous Root Canal Obturating Material: An In Vivo Study

Aim and objectives

The present study was intended to assess the biocompatibility of newly formulated materials such as zinc oxide (ZO) admixed with ajwain oil (A) as well as ajwain eugenol (E) (1:1 ratio) against ZOE through an animal model as root canal obturating materials in deciduous teeth.

Materials and methods

The study involved randomly selected 24 albino rats, which were divided into three groups based on test materials. Two polyethylene tubes (PETT) (8 mm long × 1 mm internal diameter) were inserted into connective tissues of the dorsal side on either side of each rat viz empty tube (negative control) and another containing test material (test group). Animals were sacrificed at the end of the 7th and 21st days. PETT with surrounding connective tissues were excised. Histopathological evaluations of the material's biocompatibility were done by determining inflammatory tissue responses. Non-parametric tests such as Kruskal-Wallis and Mann-Whitney U were used for statistical analysis (p < 0.05).

Results

Histopathological examination on the 7th day showed increased polymorphonuclear cells for all test materials compared to the negative control (p = 0.92), suggesting acute inflammation. The inflammation subsided gradually after 21 days (p = 0.48). The lymphocytes increased after 21 days for all the materials indicating chronic inflammation (p = 0.79), as well as fibroblasts (p = 0.34) and capillaries (p = 0.35), indicating healing and repair.

Conclusion

The newly formulated obturating materials were found to be biocompatible compared to ZOE.

How to cite this article

Dahake PT, Joshi SS, Kale YJ, et al. Biocompatibility of Ajwain Oil Combined with Eugenol and Zinc Oxide as a Deciduous Root Canal Obturating Material: An In Vivo Study. Int J Clin Pediatr Dent 2023;16(3):431-436.

A Short Review on Biomedical Applications of Nanostructured Bismuth Oxide and Related Nanomaterials

In this review, we reported the main achievements reached by using bismuth oxides and related materials for biological applications. We overviewed the complex chemical behavior of bismuth during the transformation of its compounds to oxide and bismuth oxide phase transitions. Afterward, we summarized the more relevant studies regrouped into three categories based on the use of bismuth species: (i) active drugs, (ii) diagnostic and (iii) theragnostic. We hope to provide a complete overview of the great potential of bismuth oxides in biological environments.

Bone morphogenetic proteins in biomineralization of two endodontic restorative cements

To assess the effect of biodentine (BD) and MTA-angelus (MTA) on biocompatibility, BMP2, BMP4, and osteocalcin (OC) expression. Subcutaneously implanted tubes of four groups (MTA, BD, Control, and Sham) were kept over 15, 30, and 60 days; histological analyses were performed using H&E and Von Kossa; ELISA quantified IL-1β and IL-8 expression; and qRT-PCR verified gene expression of BMPs and OC. Sham showed slight changes in profile/intensity of inflammatory infiltrate in all periods. Control had an inflammatory score significantly higher than Sham at 15 days (p < .05). BD revealed a similar inflammatory response to Sham, without significant changes over periods. MTA group exhibited an increase in chronic inflammatory profile at 30 days, with significant reduction at 60 days, when compared to Sham (p < .05). At 30/60 days, experimental groups presented birefringent areas. At 30/60 days, BD and MTA significantly increase IL-1β compared to Control, whereas an increase in IL-8 was observed only in BD. At 30/60 days, BD produces an expression of BMP2 whereas MTA influenced BMP4 and OC. Materials tested are biocompatible and they have osteoinductive activity; the materials influenced the expression of the tested mediators differently, suggesting different affinities with the substrate and the dental substrates.

Calcium silicate-based cements and functional impacts of various constituents

Calcium silicate-based cements have superior sealing ability, bioactivity, and marginal adaptation, which make them suitable for different dental treatment applications. However, they exhibit some drawbacks such as long setting time and poor handling characteristics. To overcome these limitations calcium silicates are engineered with various constituents to improve specific characteristics of the base material, and are the focus of this review. An electronic search of the PubMed, MEDLINE, and EMBASE via OVID databases using appropriate terms and keywords related to the use, application, and properties of calcium silicate-based cements was conducted. Two independent reviewers obtained and analyzed the full texts of the selected articles. Although the effects of various constituents and additives to the base Portland cement-like materials have been investigated, there is no one particular ingredient that stands out as being most important. Applying nanotechnology and new synthesis methods for powders most positively affected the cement properties.

Pulp tissue response to Portland cement associated with different radio pacifying agents on pulpotomy of human primary molars

The objective of this research was to evaluate the response of Portland cement associated with different radio pacifying agents on pulp treatment of human primary teeth by clinical and radiographic exams and microscopic analysis. Thirty mandibular primary molars were randomly divided into the following groups: Group I - Portland cement; Group II - Portland cement with iodoform (Portland cement + CHI3 ); Group III - Portland cement with zirconium oxide (Portland cement + ZrO2 ); and treated by pulpotomy technique (removal of a portion of the pulp aiming to maintain the vitally of the remaining radicular pulp tissue using a therapeutic dressing). Clinical and radiographic evaluations were recorded at 6, 12 and 24 months follow-up. The teeth at the regular exfoliation period were extracted and processed for histological analysis. Data were tested using statistical analysis with a significance level of 5%. The microscopic findings were descriptively analysed. All treated teeth were clinically and radiographically successful at follow-up appointments. The microscopic analysis revealed positive response to pulp repair with hard tissue barrier formation and pulp calcification in the remaining roots of all available teeth. The findings of this study suggest that primary teeth pulp tissue exhibited satisfactory biological response to Portland cement associated with radio pacifying agents. However, further studies with long-term follow-up are needed to determine the safe clinical indication of this alternative material for pulp therapy of primary teeth.

Clinical and radiographic evaluation of Portland cement added to radiopacifying agents in primary molar pulpotomies

AIM

This was to evaluate the clinical and radiographic outcomes of Portland cement (PC) added to radiopacifying agents in primary molar pulpotomies.

METHODS

Thirty primary mandibular molars of children aged between 5 and 9 years were randomly assigned to the following groups: PC; PC with iodoform (PC + CHI(3)); PC with zirconium oxide (PC + ZrO(2)) and treated by pulpotomy technique. Clinical and radiographic follow-up assessments were performed at 6, 12 and 24 months. Statistical analysis was performed by Fisher's exact test (P < 0.05).

RESULTS

The clinical and radiographic evaluations showed 100 % success rates, and the results showed no statistically significant difference between groups.

CONCLUSIONS

According to this study, PC added to radiopacifying agents exhibited satisfactory clinical and radiographic results in primary molar pulpotomies.

Influence of bismuth oxide concentration on the pH level and biocompatibility of white Portland cement

Objectives

To investigate if there is a relation between the increase of bismuth oxide and the decrease of pH levels and an intensification of toxicity in the Portland cement.

Material and Methods

White Portland cement (WPC) was mixed with 0, 15, 20, 30 and 50% bismuth oxide, in weight. For the pH level test, polyethylene tubes were filled with the cements and immersed in Milli-Q water for 15, 30 and 60 days. After each period, the increase of the pH level was assessed. For the biocompatibility, two polyethylene tubes filled with the cements were implanted in ninety albino rats (n=6). The analysis of the intensity of the inflammatory infiltrate was performed after 15, 30 and 60 days. The statistical analysis was performed using the Kruskal-Wallis, Dunn and Friedman tests for the pH level and the Kruskal-Wallis and Dunn tests for the biological analysis (p<0.05).

Results

The results showed an increase of the pH level after 15 days, followed by a slight increase after 30 days and a decrease after 60 days. There were no significant statistical differences among the groups (p>0.05). For the inflammatory infiltrates, no significant statistical differences were found among the groups in each period (p>0.05). The 15% WPC showed a significant decrease of the inflammatory infiltrate from 15 to 30 and 60 days (p<0.05).

Conclusions

The addition of bismuth oxide into Portland cement did not affect the pH level and the biological response. The concentration of 15% of bismuth oxide resulted in significant reduction in inflammatory response in comparison with the other concentrations evaluated.

Análise físico-química do MTA e do cimento Portland associado a quatro diferentes radiopacificadores

INTRODUÇÃO: O Mineral Trióxido Agregado (MTA) é composto por cimento Portland (CP) e um radiopacificador (óxido de bismuto).OBJETIVO: Avaliar tempo de presa, solubilidade, pH, liberação de íons Cálcio e radiopacidade do cimento Portland puro ou associado a quatro radiopacificadores (sulfato de bário, carbonato de bismuto, óxido de bismuto e iodofórmio), comparados ao MTA branco (Angelus, Londrina, Brasil).MATERIAL E MÉTODO: A proporção empregada CP/radiopacificador foi de 4:1 em peso, (80% de cimento Portland e 20% de radiopacificador). A especificação 57 da ADA foi usada para avaliação do tempo de presa. A solubilidade foi analisada segundo a especificação ISO 6876/2001. A avaliação do pH foi realizada com peagâmetro digital e a liberação de íons Ca++foi verificada por meio de espectrofotômetro de absorção atômica. A radiopacidade foi determinada em milímetros de alumínio (mm/Al). Os resultados foram submetidos aos testes de Análise de Variância e Tukey, nível de significância 5%.RESULTADO: O sulfato de bário não alterou o tempo de presa final do CP. Radiopacidade inferior ao mínimo recomendado pelas normas da ADA nº 57 e ISO 6876/2001 foi observada para CP e CP associado com sulfato de bário. O CP associado ao iodofórmio apresentou solubilidade acima dos 3% recomendados pela ISO 6876/2001. Todos os materiais proporcionaram alcalinização do meio e promoveram liberação de íons cálcio.CONCLUSÃO: Carbonato de bismuto ou óxido de bismuto proporcionaram tempo de presa inicial, solubilidade, pH, liberação de íons Cálcio e radiopacidade adequados quando associados ao CP.

Cytocompatibility and antibacterial properties of capping materials

The aim of this study was to evaluate and compare the antimicrobial activity and cytocompatibility of six different pulp-capping materials: Dycal (Dentsply), Calcicur (Voco), Calcimol LC (Voco), TheraCal LC (Bisco), MTA Angelus (Angelus), and Biodentine (Septodont). To evaluate antimicrobial activity, materials were challenged in vitro with Streptococcus mutans, Streptococcus salivarius, and Streptococcus sanguis in the agar disc diffusion test. Cytocompatibility of the assayed materials towards rat MDPC-23 cells was evaluated at different times by both MTT and apoptosis assays. Results significantly differed among the different materials tested. Both bacterial growth inhibition halos and cytocompatibility performances were significantly different among materials with different composition. MTA-based products showed lower cytotoxicity and valuable antibacterial activity, different from calcium hydroxide-based materials, which exhibited not only higher antibacterial activity but also higher cytotoxicity.

Effect of bismuth oxide on white mineral trioxide aggregate: chemical characterization and physical properties

AIM

To assess the effect of bismuth oxide (Bi2 O3 ) on the chemical characterization and physical properties of White mineral trioxide aggregate (MTA) Angelus.

METHODOLOGY

Commercially available White MTA Angelus and White MTA Angelus without Bi2 O3 provided by the manufacturer especially for this study were subjected to the following tests: Rietveld X-ray diffraction analysis (XRD), energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM), compressive strength, Vickers microhardness test and setting time. Chemical analysis data were reported descriptively, and physical properties were expressed as means and standard deviations. Data were analysed using Student's t-test and Mann-Whitney U test (P = 0.05).

RESULTS

Calcium silicate peaks were reduced in the diffractograms of both hydrated materials. Bismuth particles were found on the surface of White MTA Angelus, and a greater amount of particles characterized as calcium hydroxide was observed by visual examination on White MTA without Bi2 O3 . The material without Bi2 O3 had the shortest final setting time (38.33 min, P = 0.002), the highest Vickers microhardness mean value (72.35 MPa, P = 0.000) and similar compressive strength results (P = 0.329) when compared with the commercially available White MTA Angelus containing Bi2 O3 .

CONCLUSION

The lack of Bi2 O3 was associated with an increase in Vickers microhardness, a reduction in final setting time, absence of Bi2 O3 peaks in diffractograms, as well as a large amount of calcium and a morphology characteristic of calcium hydroxide in EDX/SEM analysis.

The cytotoxic evaluation of mineral trioxide aggregate and bioaggregate in the subcutaneous connective tissue of rats

Objectives: The purpose of this study was to evaluate and compare the cytotoxic effects of ProRoot MTA and DiaRoot BA, a bioceramic nanoparticulate cement, on subcutaneous rat tissue. Study Design: Fifty Sprouge Dawley rats were used in this study. Polyethylene tubes filled with ProRoot MTA and DiaRoot BioAggregate, along with a control group of empty, were implanted into dorsal connective tissue of rats for 7, 15, 30, 60, and 90 days. After estimated time intervals the rats were sacrificed. The specimens were fixed, stained with hematoxylin and eosin, and then evaluated under a light microscope for inflammatory reactions and mineralization. Results: All groups evoked a severe to moderate chronic inflammatory reaction at 7 and 15 days, which decreased with time. Both the MTA and BioAggregate groups showed similar inflammatory reactions, except at 90 days when MTA showed statistically significant greater inflammation (p>0.05). The MTA group showed foreign body reaction at all times. Compared to BioAggregate, MTA showed significantly more foreign body reaction at 60 and 90 days (p<0.0001). After 30 days foreign body reaction of BioAggregate decreased significantly. Both MTA and BioAggregate groups showed similar necrosis at 7 and 15 days (p=0.094 and p=0.186 respectively). No necrosis was observed after 15 days. Similarly there was no fibrosis after 30 days for both MTA and BioAggregate groups (p>0.05). Conclusions: Since DiaRoot BioAggregate showed significantly better results than MTA, we can conclude that it is more biocompatible. However, further studies are required to confirm this result.

Key words:Biocompatibility, mineral trioxide aggregate, bioAggregate.

Rat subcutaneous tissue response to MTA Fillapex® and Portland cement

The aim of this study was to evaluate the response of rat subcutaneous tissue to MTA Fillapex® (Angelus), an experimental root canal filling material based on Portland cement and propylene glycol (PCPG), and a zinc oxide, eugenol and iodoform (ZOEI) paste. These materials were placed in polyethylene tubes and implanted into the dorsal connective tissue of Wistar rats for 7 and 15 days. The specimens were stained with hematoxylin and eosin, and evaluated regarding inflammatory reaction parameters by optical microscopy. The intensity of inflammatory response against the sealers was analyzed by two blinded and previously calibrated examiners for all experimental periods (kappa=0.96). The histological evaluation showed that all materials caused a moderate inflammatory reaction at 7 days, which subsided with time. A greater inflammatory reaction was observed at 7 days in the tubes filled with ZOEI paste. Tubes filled with MTA Fillapex presented some giant cells, macrophages and lymphocytes after 7 days. At 15 days, the presence of fibroblasts and collagen fibers was observed indicating normal tissue healing. The tubes filled with PCPG showed similar results to those observed in MTA Fillapex. At 15 days, the inflammatory reaction was almost absent at the tissue, with several collagen fibers indicating normal tissue healing. Data were analyzed by the nonparametric Kruskal-Wallis test (α=0.05). Statistically significant difference (p<0.05) was found only between PCPG at 15 days and ZOEI at 7 days groups. No significant differences were observed among the other groups/periods (p>0.05). MTA Fillapex and Portland cement added with propylene glycol had greater tissue compatibility than the PCPG paste.

Cement-related particles interact with proinflammatory IL-8 chemokine from human primary oropharyngeal mucosa cells and human epithelial lung cancer cell line A549

Epidemiological studies have shown that respirable exposure to emitted cement particulate matter is associated with adverse health risk for human. The underlying mechanisms, however, are poorly understood. To examine the effect of cement, nine blinded cement-related particulates (<10 μm) were assessed with regard to their induction of the proinflammatory cytokines IL-6 and IL-8 in human primary epithelial cells (pEC) from oropharyngeal mucosa as well as from nonsmall-cell lung carcinoma (non-SCLC) cells A549. It was demonstrated that the cement specimens did not act cytotoxic as assessed by the lactate dehydrogenase (LDH) assay. The basal and IL-1β-induced IL-8 expression was suppressed, in contrast to an unchanged IL-6. At the transcript level the basal and induced IL-6 and IL-8 gene expression was not influenced by cement dust. To discover the mechanism by which cement influenced the IL-8 expression the following experiments were performed. Submerse exposure experiments have shown that the release of IL-8 was suppressed by cement dust. Furthermore, the incubation of IL-8 with cement-related specimens under cell-free condition led to a loss of immunoreactive IL-8. An immunological masking of IL-8 by free soluble components of respiratory epithelial cells was excluded. Thus, the decrease of IL-8 protein content after cement exposure seems to be a result of the adsorption of IL-8 protein to cement particles and the inhibition of IL-8 release. In conclusion, due to absent cytotoxic and inflammatory effects of cement-related specimens in both human pEC and A549 cell models it remains open how cement exposure may lead to the respiratory adverse effects in humans.

Clinical study of Mineral Trioxide Aggregate in primary molars. Comparison between Grey and White MTA--a long term follow-up (84 months)

OBJECTIVES

The aim of the present study was to conduct a clinical and radiographic long-term evaluation of pulpotomy in temporary molars performed with Grey and White Mineral Trioxide Aggregate (MTA) and compare the results of Grey and White MTA pulpotomies in a sample of 233 primary molars with a maximum follow-up period of 84 months.

METHODS

The sample was selected from patients treated at the Department of Pediatric Dentistry, Faculty of Dentistry, Complutense University of Madrid, Spain. This prospective study included first and second primary molars treated with pulpotomy with Grey or White MTA, controlled for a maximum follow-up period of 84 months. Statistical analysis of clinical and radiographic findings was completed using ANOVA (P<0.05).

RESULTS

Follow-up evaluations, performed every 6 months, revealed that only 2 molars treated with White MTA presented abscess and pathological mobility. Radiographic examination of the 210 molars revealed unfavourable pulp response in only 6 molars (internal or furcation root resorption), without statistically significant differences between Grey and White MTA. Two radiological findings were noticed: dentine bridge formation and partial or total root canal stenosis. Grey MTA induced a higher percentage of dentine bridges with statistically significant differences (P<0.05), and a higher percentage of pulp canal stenosis, without a statistically significant difference.

CONCLUSIONS

Grey and White MTA presented high levels of clinical and radiographic success. Although the present study showed evidence of a very good biologic response with both types of MTA, Grey MTA showed significantly higher number of dentine bridge formation than White MTA.

Ex vivo assessment of genotoxicity and cytotoxicity in murine fibroblasts exposed to white MTA or white Portland cement with 15% bismuth oxide

AIMS

To evaluate whether white mineral trioxide aggregate (MTA) or white Portland cement with 15% bismuth oxide were able to induce genetic damage and cellular death ex vivo.

METHODOLOGY

Aliquots of 1 × 10(4) murine fibroblasts were incubated at 37 °C for 3 h with MTA (white) or white Portland cement with 15% bismuth oxide, at final concentrations ranging from 10 to 1000 μg mL(-1) individually. Data of three independent repeats from the comet assay and the trypan blue exclusion test were assessed by the one-way anova followed by Tukey's test.

RESULTS

Mineral trioxide aggregate or Portland cement containing bismuth oxide did not produce genotoxic effects with respect to the single-cell gel (comet) assay data for all concentrations evaluated. Furthermore, no cytotoxicity was observed for MTA or Portland cement.

CONCLUSION

White MTA or white Portland cement containing 15% bismuth oxide were not genotoxic and cytotoxic.

Understanding mineral trioxide aggregate/Portland-cement: a review of literature and background factors

AIM

This was to carry out a review of the literature concerning mineral trioxide aggregate (MTA) and Portland cement with regards to clinical, biological and mechanical findings and a possible substitution of MTA through Portland cement for endodontic use.

STUDY DESIGN

Electronic literature search of scientific papers from January 1993 to January 2009 was carried out on the MEDLINE and Scopus databases using specific key words. In total, 57 papers were identified that dealt with MTA and Portland cement in a relevant way.

RESULTS

The review of 50 papers conforming to the applied criteria showed that MTA and Portland cements have the same clinical, biological and mechanical properties. In animal experiments and technical characterisations both materials seemed to have very similar properties. The only difference is bismuth oxide in MTA added for better radio opacity. It seems likely that MTA materials are based on industrial Portland cements mixed with bismuth oxide. More studies, especially some long-term studies comparing MTA and Portland cement, are necessary.

CONCLUSION

The existing literature gives a solid base for clinical studies with Portland cement in order to replace MTA as an endodontic material. Portland cement could be a substitute for most endodontic materials used in primary teeth.