Doping nanoparticles into polymers and ceramics using ultrasound radiation

A Review of Ultrasonic Treatment in Mineral Flotation: Mechanism and Recent Development

Ultrasonic treatment has been widely used in the mineral flotation process due to its advantages in terms of operational simplicity, no secondary pollutant formation, and safety. Currently, many studies have reported the effect of ultrasonic treatment on mineral flotation and shown excellent flotation performance. In this review, the ultrasonic mechanisms are classified into three types: the transient cavitation effect, stable cavitation effect, and acoustic radiation force effect. The effect of the main ultrasonic parameters, including ultrasonic power and ultrasonic frequency, on mineral flotation are discussed. This review highlights the uses of the application of ultrasonic treatment in minerals (such as the cleaning effect, ultrasonic corrosion, and desulfuration), flotation agents (such as dispersion and emulsification and change in properties and microstructure of pharmaceutical solution), and slurry (such formation of microbubbles and coalescence). Additionally, this review discusses the challenges and prospects of using ultrasonic approaches for mineral flotation. The findings demonstrate that the application of the ultrasonic effect yields diverse impacts on flotation, thereby enabling the regulation of flotation behavior through various treatment methods to enhance flotation indices and achieve the desired objectives.

The structural characteristics and physicochemical properties of mung bean protein hydrolysate of protamex induced by ultrasound

BACKGROUND

The limited physicochemical properties (such as low foaming and emulsifying capacity) of mung bean protein hydrolysate restrict its application in the food industry. Ultrasound treatment could change the structures of protein hydrolysate to accordingly affect its physicochemical properties. The aim of this study was to investigate the effects of ultrasound treatment on the structural and physicochemical properties of mung bean protein hydrolysate of protamex (MBHP). The structural characteristics of MBHP were evaluated using tricine sodium dodecylsulfate-polyacrylamide gel electrophoresis, laser scattering, fluorescence spectrometry, etc. Solubility, fat absorption capacity and foaming, emulsifying and thermal properties were determined to characterize the physicochemical properties of MBHP.

RESULTS

MBHP and ultrasonicated-MBHPs (UT-MBHPs) all contained five main bands of 25.8, 12.1, 5.6, 4.8 and 3.9 kDa, illustrating that ultrasound did not change the subunits of MBHP. Ultrasound treatment increased the contents of α-helix, β-sheet and random coil and enhanced the intrinsic fluorescence intensity of MBHP, but decreased the content of β-turn, which demonstrated that ultrasound modified the secondary and tertiary structures of MBHP. UT-MBHPs exhibited higher solubility, foaming capacity and emulsifying properties than MBHP, among which MBHP-330 W had the highest solubility (97.32%), foaming capacity (200%), emulsification activity index (306.96 m2  g-1 ) and emulsion stability index (94.80%) at pH 9.0.

CONCLUSION

Ultrasound treatment enhanced the physicochemical properties of MBHP, which could broaden its application as a vital ingredient in the food industry. © 2023 Society of Chemical Industry.

Making salty cucumbers and honeyed apples by applying the sonochemical method

Sonochemistry was applied in the last few years for coating surfaces of various substrates for imparting desired properties to the surface. In the current paper the coating of cucumbers with NaCl nanoparticles and apples with honey nanoparticles was accomplished by applying the sonochemical method. In both coating the nanoparticles were deposited from aqueous solutions. The products were characterized by Inductively coupled plasma, Dynamic light scattering, Scanning electron microscopy, and Nuclear magnetic resonance.

Investigation of Ultrasonic Treatment on Physicochemical, Structural and Morphological Properties of Sodium Alginate/AgNPs/Apple Polyphenol Films and Its Preservation Effect on Strawberry

An antibacterial and anti-oxidation composite film was prepared by a casting method using sodium alginate (SA) and apple polyphenols (APPs) as the base material and glycerol as the plasticizer. Silver nanoparticles (AgNPs) were deposited by ultrasonic-assisted electrospray method. The degree of influence of the addition ratio of SA and AgNPs and different ultrasonic time on the mechanical properties, barrier properties, optical properties, and hydrophilicity of the composite film was explored. The composite films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the SA: AgNPs ratio of 7:3 and the ultrasonic time for 30 min have the best comprehensive performance, and SA/AgNPs/APP films showed the lowest water vapor permeability value of 0.75 × 10⁻¹¹ g/m·s·Pa. The composite film has good strength and softness, with tensile strength (TS) and elongation at break (E) at 23.94 MPa and 29.18%, respectively. SEM images showed that the surface of the composite film was smooth and the AgNPs’ distribution was uniform. The composite film showed broad antibacterial activity, and the antibacterial activity of Escherichia coli (92.01%) was higher than that of Staphylococcus aureus (91.26%). However, due to the addition of APP, its antioxidant activity can reach 98.39%, which has a synergistic effect on antibacterial activity. For strawberry as a model, the results showed that this composite film can prolong the shelf life of strawberries for about 8 days at 4 °C, effectively maintaining their storage quality. Compared with the commonly used PE(Polyethylene film) film on the market, it has a greater fresh-keeping effect and can be used as an active food packaging material.

The Use of Power Ultrasound for the Production of PEMFC and PEMWE Catalysts and Low-Pt Loading and High-Performing Electrodes

This short review paper highlights some of the research works undertaken over the years by Pollet’s research groups in Birmingham, Cape Town, and Trondheim, in the use of power ultrasound for the fabrication of low temperature fuel cell and electrolyzer catalysts and electrodes. Since the publication of ‘The use of ultrasound for the fabrication of fuel cell materials’ in 2010, there has been an upsurge of international interest in the use of power ultrasound, sonochemistry, and sonoelectrochemistry for the production of low temperature fuel cell and electrolyzer materials. This is because power ultrasound offers many advantages over traditional synthetic methods. The attraction of power ultrasound is the ability to create localized transient high temperatures and pressures, as a result of cavitation, in solutions at room temperature.

Ultrasound promoted transition metal doped polyaniline nanofibers: Enhanced electrode material for electrochemical energy storage applications

Here in, we report a simple and facile method to synthesis morphology oriented transition metal (Nickel) doped polyaniline (Ni²⁺/PANI) by chemical oxidative polymerization with the assistance of ultrasonic irradiation. Physicochemical property of the materials examined through XRD and FT-IR. The morphological feature exposed that the sonochemical assisted Ni²⁺ doped PANI is differing from the conventional method and it reveals a notable electrochemical property as in the form of specific capacitance (370 F g^-1 at 0.5 A g^-1) with improved rate capability and sustained cycling performance due to its typical interconnected nano-fibrillar morphology than the other synthesized materials. These intriguing features realized from the properly arranged nanostructure with perfect doping and make as a promising candidate as an electrode material in supercapacitor applications.

Luminol modified polycarbazole and poly(o-anisidine): Theoretical insights compared with experimental data

With the aim to explore the effect of luminol as a multifunctional dopant for conjugated polymers, the present study reports the ultrasound-assisted doping of polycarbazole (PCz) and poly(o-anisidine) (PAnis) with luminol in basic, acidic and neutral media. The synthesized homopolymers and luminol doped polymers were characterized using FT-IR, UV-visible and XRD studies while the photo-physical properties were investigated via fluorescence spectroscopy. Density functional theory (DFT) calculations were performed to get insights into the structural, optical, and electronic properties of homopolymers of polycarbazole (PCz) and poly(o-anisidine) (PAnis). Vibrational bands B3LYP/6-311G (d,p) level, UV-vis spectral bands and electronic properties such as ionization potentials (IP), electron affinities (EA) and HOMO-LUMO band gap energies of the homopolymers and doped polymers were calculated and compared. Results revealed that luminol doped polymers showed different photo-physical characteristics in acidic, basic and neutral media which could be tuned to obtain near infrared (NIR) emitting polymers.

Growth and optical properties of Ag-Ti composite nanorods based on oblique angle co-deposition technique

Ag-Ti composite nanorod structures with various Ag compositions were fabricated by the oblique angle co-deposition technique, and their optical transmission spectra are tuned by composition ratios of Ag and Ti, polarization directions, and deposition angles. Such tunable optical properties have potential applications in optoelectronics. Specially, for the Ag80 composite nanorod structures, there exists a wavelength, where it is isotropic. We also show that the transmission spectra of the Ag80 composite nanorod structure for the deposition angle of 87.5° are greater than 90%, while the transmission spectra for the 75° deposition angle are lower than 20%. Utilizing such a property, high or low transmission lenses can be designed.

Characterization of nanoparticles doped composites using ultrasound

The aim of this work is the non-destructive automatic mechanical characterization of nanoparticles doped composites using ultrasound in order to understand and control the dispersion of the dopant nanoparticles in the final product. We present a method which is able to measure the elastic constants of composites (Youngs, Bulk, Shear Modulus and Poissons ratio), in addition to other parameters as density, sound velocity and thickness, providing information of the nanoparticles dispersion in the samples. All results are obtained with a single ultrasonic measure at each point of the samples' surface in an immersion setup with both pulse-echo and through-transmission measurements simultaneously, obtaining detailed information for all the samples' surface in a XY scanning. All the analysis is performed automatically, that is, no manual correction or adjustment is needed at any stage of the process. To validate the results, a polyester based resin has been analyzed with different concentrations of graphene nanoparticles as dopant. The method has shown to be very accurate and reliable. The resolution of the values obtained for the elastic constants is limited by the resolution in the velocities measurements, for which we have achieved a resolution in the order of cm/s, thus providing very accurate measurements of the elastic constants.

Imparting Pharmaceutical Applications to the Surface of Fabrics for Wound and Skin Care by Ultrasonic Waves

In this review, we report the functionalization of textiles composed of nanoscale reactive materials in the treatment of wounds and skin diseases such as acne. In view of the growing demand for high-quality textiles, much research is focused on the creation of antimicrobial finishings for fabrics, in order to protect customers from pathogenic or odorgenerating microorganisms. We present coatings from inorganic, organic and biochemical nanoparticles (NPs) on surfaces that impart the ability to kill bacteria, avoid biofilm formation and speed up the recovery of wounds. In all three cases, sonochemistry is used for immobilizing the nanoparticles on the surfaces. The Introduction broadly covers the progress of nanotechnology in the fields of wound and skin care. The first section of this review outlines the mechanism of the ultrasound-assisted deposition of nanoparticles on textiles. The coating can be performed by an in-situ process in which the nanoparticles are formed and subsequently thrown onto the surface of the fabrics at a very high speed. This approach was used in depositing metal-oxide NPs such as ZnO, CuO and Zn-CuO or the organic NPs of tannic acid, chitosan, etc. on textiles. In addition, the sonochemical process can be used as a "throwing stone" technique, namely, previously synthesized or commercially purchased NPs can be placed in the sonication bath and sonicated in the presence of the fabric. The collapse of the acoustic bubble in the solution causes the throwing of the immersed commercial NPs onto the textiles. This section will also outline why sonochemical deposition on textiles is considered the best coating technique. The second section will discuss new applications of the sonochemically- coated textiles in killing bacteria, avoiding biofilm formation and more. Two points should be noted: 1) the review will primarily report results obtained at Bar-Ilan University and 2) since for all textiles tested in our experiments (cotton, polyester, nylon, nonwoven) similar results were obtained, the type of textile used in a specific experiment will not be mentioned - textiles will be discussed in general. It is also worth emphasizing that this review concentrates only on the sonochemical coating of textiles, ignoring other deposition techniques.

Airborne Nanoparticle Release and Toxicological Risk from Metal-Oxide-Coated Textiles: Toward a Multiscale Safe-by-Design Approach

Nano metal oxides have been proposed as alternatives to silver (Ag) nanoparticles (NPs) for antibacterial coatings. Here, cotton and polyester-cotton fabrics were sonochemically coated with zinc oxide (ZnO) and copper oxide (CuO) NPs. By varying the reaction solvent (water or ethanol), NPs with different sizes and shapes were synthesized. The cytotoxic and pro-inflammatory effects of studied NPs were investigated in vitro in human alveolar epithelial A549 and macrophage-like THP1 cells. To understand the potential respiratory impact of the NPs, the coated textiles were subjected to the abrasion tests, and the released airborne particles were measured. A very small amount of the studied metal oxides NPs was released from abrasion of the textiles coated by the ethanol-based sonochemical process. The release from the water-based coating was comparably higher. Lung and immune cells viability decreased after 24 h of exposure only at the highest studied NPs concentration (100 μg/mL). Different from the ZnO NPs, both formulations of CuO NPs induced IL-8 release in the lung epithelial cells already at subtoxic concentrations (1-10 μg/mL) but not in immune cells. All of the studied NPs did not induce IL-6 release by the lung and immune cells. Calculations revealed that the exposures of the NPs to human lung due to the abrasion of the textiles were lower or comparable to the minimum doses in the cell viability tests (0.1 μg/mL), at which acute cytotoxicity was not observed. The results alleviate the concerns regarding the potential risk of these metal oxide NPs in their applications for the textile coating and provide insight for the safe-by-design approach.

Surfactant Incorporated Co Nanoparticles Polymer Composites with Uniform Dispersion and Double Percolation

Series of Cobalt nanoparticles incorporated polymethylmethacrylate composites in the presence and absence of dodecyl-benzene-sulphonic acid (DBSA-CoNPs/PMMA and CoNPs/PMMA, resp.) were synthesized by solution mixing methodology. UV-visible and FTIR techniques were used to confirm the formation of nanocomposite. UV-visible spectra of the composites showed the incorporation of filler particles in the polymer matrix. On the other hand, FTIR spectra indicated the physical interaction between the two phases of the composite. Moreover, the electrical nature of the composites was studied by plotting graphs between electrical conductivity (measured using LCR meter at 100 kHz) and contents of the filler particles as introduced in the polymer matrix. An increase in electrical conductivity was first observed with increasing filler concentration up to the critical percolation threshold value (0.5% for DBSA-CoNPs/PMMA and 1% for CoNPs/PMMA), which then dropped upon further increments in the filler content. However, at higher concentrations, a second jump in the conductivity was observed in case of DBSA-CoNPs/PMMA composites.

New life for an old antibiotic

Restoring the antibacterial properties of existing antibiotics is of great concern. Herein, we present, for the first time, the formation and deposition of stable antibiotic nanoparticles (NPs) on graphene oxide (GO) sheets by a facile one-step sonochemical technique. Sonochemically synthesized graphene oxide/tetracycline (GO/TET) composite shows enhanced activity against both sensitive and resistant Staphylococcus aureus (S. aureus). The size and deposition of tetracycline (TET) nanoparticles on GO can be controlled by varying the sonication time. The synthesized NPs ranged from 21 to 180 nm. Moreover, ultrasonic irradiation does not cause any structural and chemical changes to the TET molecule as confirmed by Fourier transform infrared spectroscopy (FTIR). The virtue of π-π stacking between GO and TET additionally facilitate the coating of TET NPs upon GO. A time dependent release kinetics of TET NPs from the GO surface is also monitored providing important insights regarding the mechanism of antibacterial activity of GO/TET composites. Our results show that the GO/TET composite is bactericidal in nature, resulting in similar values of minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC). This composite is found to be active against TET resistant S. aureus at a concentration four times lower than the pristine TET. The sensitive S. aureus follows the same trend showing six times lower MIC values compared to pristine TET. GO shows no activity against both sensitive and resistant S. aureus even at a concentration as high as 1 mg/mL but influences the biocidal activity of the GO/TET composite. We propose that the unique structure and composition manifested by GO/TET composites may be further utilized for different formulations of antibiotics with GO. The sonochemical method used in this work can be precisely tailored for the stable deposition of a variety of antibiotics on the GO surface to reduce health risks and increase the spectrum of applications.

Antibiotic nanoparticles embedded into the Parylene C layer as a new method to prevent medical device-associated infections

Tetracycline nanoparticles (NPs) were synthesized and simultaneously deposited on Parylene-C coated glass slides using ultrasound irradiation.

Sonochemistry in the service of SOFC research

Decoration of SOFC anode cermets with metal nanoparticles (NPs) enchance their ability and stability in natural gas to hydrogen reform. A novel sonoelectrochemical approach of Au-NPs synthesis (mean 12.31±2.69nm) is suggested, according to which the sonication is held constant while the electrochemical activity is either pulsed or continuous. The gold colloidal solution is cosonicated with state of the art cermet powder to yield particles decorated with Au-NPs. Nevertheless sonochemical routes of mixed molybdenum, rhenium or tungsten mixed oxides synthesis are utilized in order to decorate SOFC anode cermets. The decoration loading achieved spanned from 0.1 to 10.0wt.%.

Tannic acid NPs - synthesis and immobilization onto a solid surface in a one-step process and their antibacterial and anti-inflammatory properties

Tannic acid nanoparticles were synthesized from an aqueous solution without the use of stabilizers via a sonochemical process. In order to avoid the dissolution of the formed nanoparticles, the sonochemical reaction was performed in the presence of a cotton fabric: following their formation, the tannic acid nanoparticles were embedded into the cotton substrate in a one-step process. The bioactive properties of the tannic acid coated surface were examined towards the inhibition of myeloperoxidase and collagenase, two major enzymes related with inflammatory processes. In addition, the antibacterial activity of the tannic acid nanoparticles coated textiles was evaluated against Staphylococcus aureus and Pseudomonas aeruginosa.

Synthesis of MnO2 nanoparticles from sonochemical reduction of MnO4(-) in water under different pH conditions

MnO2 was synthesized by sonochemical reduction of MnO4(-) in water under Ar atmosphere at 20°C, where the effects of solution pH on the reduction of MnO4(-) were investigated. The obtained XRD results showed that poor crystallinity δ-MnO2 was formed at pH 2.2, 6.0 and 9.3. When solution pH was increased from 2.2 to 9.3, the morphologies of δ-MnO2 changed from aggregated sheet-like or needle-like structures to spherical nanoparticles and finally to cubic or polyhedron nanoparticles. After further irradiation, MnO2 was readily reduced to Mn(2+). It was confirmed that H2O2 and H atoms formed in the sonolysis of water acted as reductants for both reduction for MnO4(-) to MnO2 and MnO2 to Mn(2+). The optimum irradiation time for the effective synthesis of MnO2 was 13 min at pH 2.2, 9 min at pH 6.0, 8 min at pH 9.3, respectively.

Synthesis of flexible magnetic nanohybrid based on bacterial cellulose under ultrasonic irradiation

Flexible magnetic membrane based on bacterial cellulose (BC) was successfully prepared by in-situ synthesis of the Fe3O4 nanoparticles under different conditions and its properties were characterized. The results demonstrated that the Fe3O4 nanoparticles coated with PEG were well homogeneously dispersed in the BC matrix under ultrasonic irradiation with the saturation magnetization of 40.58 emu/g. Besides that, the membranes exhibited the striking flexibility and mechanical properties. This study provided a green and facile method to inhibit magnetic nanoparticle aggregation without compromising the mechanical properties of the nanocomposites. Magnetically responsive BC membrane would have potential applications in electronic actuators, information storage, electromagnetic shielding coating and anti-counterfeit.

Ultrasound and Microwave Coassisted Synthesis and Luminescent Properties of (Ln = La, Gd; ) Phosphors

In order to control reaction temperature and reduce processing time, a new method of ultrasound irradiation with microwave heating was used to synthesize (Ln = La, Gd; ) phosphors at only 80°C in 30 minutes. Their crystal structures and morphologies which have been verified by X-ray diffraction (XRD) and scanning electron microscopy (SEM) exhibited gradual changes due to the insertion of lanthanide ions (La or Gd) in calcium molybdates. Codoping of lanthanum ions () would enhance the emission intensities that were supported by fluorescent spectrophotometry (FL).

The growth of CuSi composite nanorod arrays by oblique angle co-deposition, and their structural, electrical and optical properties

Different CuSi composite nanorods with 0-100 at.% Cu were fabricated by an oblique angle co-deposition technique. The effects of increasing Cu during deposition on the morphologies, structures and properties were investigated. During co-evaporation, the addition of Cu decreases the nanorod width and height but increases the nanorod tilting angle. The polarized optical transmission spectra reveal that all the nanorod samples show a remarkable anisotropic response to visible light with an eccentricity e ≈ 1, whereas their optical response to NIR light depends strongly on the Cu composition, and the related eccentricity increases monotonically with the increase of Cu. The obtained amorphous Si film has a resistivity of approximately 4.9 × 10(4) Ω cm. The incorporation of 5-75 at.% Cu increases the electrical conductance from two to eight orders of magnitude. The improved conductance and the unique optical properties of the Si-based nanocomposites could have potential applications for Li-ion battery anode and optical design.

Forming nanoparticles of water-soluble ionic molecules and embedding them into polymer and glass substrates

This work describes a general method for the preparation of salt nanoparticles (NPs) made from an aqueous solution of ionic compounds (NaCl, CuSO(4) and KI). These nanoparticles were created by the application of ultrasonic waves to the aqueous solutions of these salts. When the sonication was carried out in the presence of a glass microscope slide, a parylene-coated glass slide, or a silicon wafer the ionic NPs were embedded in these substrates by a one-step, ultrasound-assisted procedure. Optimization of the coating process resulted in homogeneous distributions of nanocrystals, 30 nm in size, on the surfaces of the substrates. The morphology and structure of each of the coatings were characterized by physical and chemical methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). After 24 h of leaching into water the nanoparticles of the inorganic salts were still present on the slides, and complete leaching of nanoparticles occurred only after 96 h. A mechanism of the ultrasound-assisted coating is proposed.

Thermophysical properties of hydrogenated vanadium-doped magnesium porous nanostructures

Vanadium-doped magnesium nanostructures are fabricated by an oblique angle co-deposition method and hydrogenated/dehydrogenated for 21 cycles. The effective thermal conductivity and density of the MgH2 nanostructures is measured by using a photothermal system. A multilayer physical model is used to fit the experimental data. Our results show that the effective thermal conductivity of the hydrogenated V-doped Mg nanostructures is in the range of 1.16-2.40 W m(-1) K(-1) and the density falls in the range of 878-1320 kg m(-3). The measured density agrees well with the estimation from electron micrograph observation. Variation in the measurements indicates strong nonuniformity of the sample structure and thickness. Based on the measured density and effective thermal conductivity, the thermal conductivity of bulk V-doped Mg hydrides is also evaluated using Maxwell's correlation.

Sonochemical reduction of permanganate to manganese dioxide: the effects of H2O2 formed in the sonolysis of water on the rates of reduction

Chemical effects of ultrasound have been actively researched in the field of the synthesis of various metal nanoparticles and nanostructured materials. It is very important to understand the reduction mechanism of metal ions, because the reduction processes can be often applied to the synthesis of various materials. In this study, the sonochemical reduction of MnO4- to MnO2 in water under Ar atmosphere was investigated to discuss the reduction mechanism. It has been reported that H, OH, H2 and H2O2 are formed from the sonolysis of water. To understand the roles of H2O2 on the reduction, the reaction of MnO4- with H2O2 without ultrasonic irradiation was investigated. The obtained results suggested the progress of the following reaction: 2MnO4-+3H2O2-->2MnO2+3O2+2OH-+2H2O. In addition, the rates of the sonochemical reduction of MnO4- were investigated in the presence of 1-propanol, where 1-propanol acted as an OH radical scavenger so that the amounts of the sonochemically formed H2O2 molecules were able to be controlled. The results clearly indicated that the sonochemically formed H2O2 molecules as well as H2 molecules and H atoms play an important role for MnO4- reduction. This mechanism was also supported by the analysis of pH changes during ultrasonic irradiation: the pH value increased as the sonochemical reduction of MnO4- proceeded.