A novel liquid plasma AOP device integrating microwaves and ultrasounds and its evaluation in defluorinating perfluorooctanoic acid in aqueous media

Theoretical and experimental insights into the mechanisms of C6/C6 PFPiA degradation by dielectric barrier discharge plasma

As an emerging alternative legacy perfluoroalkyl substance, C6/C6 PFPiA (perfluoroalkyl phosphinic acids) has been detected in aquatic environments and causes potential risks to human health. The degradation mechanisms of C6/C6 PFPiA in a dielectric barrier discharge (DBD) plasma system were explored using validated experimental data and density functional theory (DFT) calculations. Approximately 94.5% of C6/C6 PFPiA was degraded by plasma treatment within 15 min at 18 kV. A relatively higher discharge voltage and alkaline conditions favored its degradation. C6/C6 PFPiA degradation was attributed to attacks of •OH, •O₂^-, and ¹O₂. Besides PFHxPA and C2 -C6 shorter-chain perfluorocarboxylic acids, several other major intermediates including C4/C6 PFPiA, C4/C4 PFPiA, and C3/C3 PFPiA were identified. According to DFT calculations, the potential energy surface was proposed for possible reactions during C6/C6 PFPiA degradation in the discharge plasma system. Integrating the identified intermediates and DFT results, C6/C6 PFPiA degradation was deduced to occur by stepwise losing CF₂, free radical polymerization, and C-C bond cleavage. Furthermore, the DBD plasma treatment process decreased the toxicity of C6/C6 PFPiA to some extent. This study provides a comprehensive understanding of C6/C6 PFPiA degradation by plasma advanced oxidation.

A novel green chemistry gelation method for polyvinyl pyrrolidone (PVP) and dimethylpolysiloxane (silicone): microwave-induced in-liquid-plasma

The focus of this article rests on our discovery that a water-soluble polymer could be cross-linked to form a gel using a novel Green Chemistry gelation method: the microwave-induced in-liquid-plasma (MILP) method that requires neither a cross-linking agent nor an initiator as are required in the conventional chemical method. For instance, the water-soluble polyvinyl pyrrolidone (PVP) polymer was gelled by MILP plasma irradiation within a few minutes without using toxic cross-linking agents and initiators. As well, the hydrophobic dimethylpolysiloxane macromolecule was dispersed in aqueous media to a colloidal sol, which could then also be easily gelled under MILP irradiation conditions within a few minutes, in comparison to the conventional method that often requires several hours to days for gelation to occur in the presence of cross-linking agents and initiators. The viscosity of the MILP silicone gel was greater than a similar gel formed by the conventional method. In contrast, the viscosity of the MILP-formed PVP gel was lower than the viscosity of the PVP gel obtained from the conventional method. Gels were characterized by ¹³C-NMR spectrometry, FT-IR spectroscopy, SEM microscopy, viscosity measurements, and dynamic light scattering for particle size distributions. Plausible mechanistic stages for the two gelation occurrences have been inferred as involving the synergistic effects from microwaves, together with the sound waves (cavitation microbubbles), heat, UV and ˙OH radicals resulting from the microwave-generated in-liquid-plasma.

The discovery of a water-soluble polymer that cross-links to form a gel using a novel green gelation method: the microwave-induced in-liquid-plasma method that requires neither a cross-linking agent nor an initiator as are required in the conventional chemical method.

Enhanced Degradation of Organic Pollutants with Microwave-induced Plasma-in-liquid (MPL): Case of Flame Retardant Tetrabromobisphenol-A in Alkaline Aqueous Media

We report the enhanced degradation of a widely used brominated flame retardant, tetrabromobisphenol-A (TBBPA), which is soluble only in organic solvents and strongly alkaline solutions, where most advanced oxidation processes (AOPs) for such substrates tend to be rather inefficient. We further report an environmentally friendly method (microwave-induced plasma-in-liquid; MPL) that operates efficiently in alkaline aqueous media without the need for organic solvents to enhance the solubility of TBBPA in water. The enhanced debromination and almost complete mineralization of TBBPA under alkaline conditions occurs within 20 min of MPL irradiation. This method, which is a new member of the AOP family, provides a simple and green approach to detoxify aqueous media contaminated with TBBPA, which requires only electric power and neither catalysts nor oxidizing agents. Several intermediate species have been identified by liquid chromatography/mass spectrometry (LC-MS), following events that involved reactive oxygen species (ROSs) such as·OH, whose first task was to approach the substrate at carbon atoms bearing the highest electron densities.

Consolidated vs new advanced treatment methods for the removal of contaminants of emerging concern from urban wastewater

Urban wastewater treatment plants (WWTPs) are among the main anthropogenic sources for the release of contaminants of emerging concern (CECs) into the environment, which can result in toxic and adverse effects on aquatic organisms and consequently on humans. Unfortunately, WWTPs are not designed to remove CECs and secondary (e.g., conventional activated sludge process, CAS) and tertiary (such as filtration and disinfection) treatments are not effective in the removal of most CECs entering WWTP. Accordingly, several advanced treatment methods have been investigated for the removal of CECs from wastewater, including consolidated (namely, activated carbon (AC) adsorption, ozonation and membranes) and new (such as advanced oxidation processes (AOPs)) processes/technologies. This review paper gathers the efforts of a group of international experts, members of the NEREUS COST Action ES1403 who for three years have been constructively discussing the state of the art and the best available technologies for the advanced treatment of urban wastewater. In particular, this work critically reviews the papers available in scientific literature on consolidated (ozonation, AC and membranes) and new advanced treatment methods (mainly AOPs) to analyse: (i) their efficiency in the removal of CECs from wastewater, (ii) advantages and drawbacks, (iii) possible obstacles to the application of AOPs, (iv) technological limitations and mid to long-term perspectives for the application of heterogeneous processes, and (v) a technical and economic comparison among the different processes/technologies.

Metal nanoparticles by doping carbon nanotubes improved the sorption of perfluorooctanoic acid

Due to considerable application of perfluorooctanoic acid (PFOA) and its refractory degradation, the widespread distribution of PFOA has already resulted in its' risks to environment and organisms. However, the intrinsic characteristic of pristine multi-walled carbon nanotubes (MWCNTs) limited their application for removing PFOA from aqueous medium. Therefore, three nano-metals (nano-crystalline iron, copper and zinc) grafted MWCNTs were synthesized and characterized by BET-N₂, TEM, FTIR, XPS and XRD as well as MWCNTs (as the control treatment) in this study. The results showed that nano metals were well grafted on the surface of MWCNTs. Adsorption were investigated by using radioactive labeled PFOA (¹⁴C-PFOA) to quantify the trace PFOA. Adsorption kinetics showed the adsorption of PFOA on the metal doped MWCNTs (MDCNTs) was controlled by intra-particle diffusion. Adsorption isotherms showed the sorption amounts on the MDCNTs were higher than the control. This attributed much to the hydrophobic interaction, electrostatic interaction and the formation of the inner sphere complexes. Ionic strength (0-100 mM) and ionic species (Ca²⁺) had little effects on the sorption of MDCNTs. PFOA adsorption on MDCNTs strongly depended on pH value in the medium. These results provide an innovative approach for removing trace PFOA from liquid medium.

In-liquid plasma: a novel tool in the fabrication of nanomaterials and in the treatment of wastewaters

Attempts to generate plasma in liquids have been successful and various devices have been proposed.

Removal of Endocrine Disruptors from Urban Wastewater by Advanced Oxidation Processes (AOPs): A Review

Over the last years the growing presence of endocrine disrupting compounds in the environment has been regarded as a serious sanitary issue. The more and more frequent detection of these compounds in the effluents of wastewater treatment plants poses the risk associated to their persistence into the aquatic systems as well as to their adverse effects on both public health and environment.

As conventional systems do not allow their efficient removal, great attention has been raised towards their possible treatment by Advanced Oxidation Processes (AOPs). They rely on the action of hydroxyl radicals, which are highly reactive species, able to oxidize recalcitrant and non-biodegradable pollutants.

AOPs can either provide contaminant partial degradation or their complete removal. As their effectiveness has been proved for a wide spectrum of both organic and inorganic pollutants, they are considered a suitable option for the treatment of contaminated aqueous media, especially when combined with conventional biological processes.

This paper aims at reviewing main AOPs for the removal of endocrine disruptors, in order to highlight the most important features of different technologies, thus providing their comparative assessment. To this end, a brief overview of the most frequently detected endocrine disruptor compounds was also discussed, in order to clarify their fate into the environment as well as the contamination pathways of greatest concern for human health.

Effect of surfactants on the degradation of perfluorooctanoic acid (PFOA) by ultrasonic (US) treatment

Perfluorooctanoic acid (C7F15COOH, PFOA) is an aqueous anionic surfactant and a persistent organic pollutant. It can be easily adsorbed onto the bubble-water interface and both mineralized and degraded by ultrasonic (US) cavitation at room temperature. The aim of this study is to investigate whether the effect of US on the degradation of PFOA in solution can be enhanced by the addition of surfactant. To achieve this aim, we first investigated the addition of a cationic (hexadecyl trimethyl ammonium bromide, CTAB), a nonionic (octyl phenol ethoxylate, TritonX-100), and an anionic (sodium dodecyl sulfate, SDS) surfactant. We found the addition of CTAB to have increased the degradation rate the most, followed by TritonX-100. SDS inhibited the degradation rate. We then conducted further experiments characterizing the removal efficiency of CTAB at varying surfactant concentrations and solution pHs. The removal efficiency of PFOA increased with CTAB concentration, with the efficiency reaching 79% after 120 min at 25°C with a 0.12 mM CTAB dose.

Highly efficient electrochemical degradation of perfluorooctanoic acid (PFOA) by F-doped Ti/SnO2 electrode

The novel F-doped Ti/SnO2 electrode prepared by SnF4 as the single-source precursor was used for electrochemical degradation of aqueous perfluorooctanoic acid (PFOA). Higher oxidation reactivity and significantly longer service life were achieved for Ti/SnO2-F electrode than Ti/SnO2-X (X=Cl, Br, I, or Sb) electrode, which could decomposed over 99% of PFOA (50 mL of 100 mg L(-1)) within 30-min electrolysis. The property of Ti/SnO2-F electrode and its electrooxidation mechanism were investigated by XRD, SEM-EDX, EIS, LSV, and interfacial resistance measurements. We propose that the similar ionic radii of F and O as well as strong electronegativity of F caused its electrochemical stability with high oxygen evolution potential (OEP) and smooth surface to generate weakly adsorbed OH. The preparation conditions of electrode were also optimized including F doping amount, calcination temperature, and dip coating times, which revealed the formation process of electrode. Additionally, the major mineralization product, F(-), and low concentration of shorter chain perfluorocarboxylic acids (PFCAs) were detected in solution. So the reaction pathway of PFOA electrooxidation was proposed by intermediate analysis. These results demonstrate that Ti/SnO2-F electrode is promising for highly efficient treatment of PFOA in wastewater.

Enabling technologies built on a sonochemical platform: challenges and opportunities

Scientific and technological progress now occurs at the interface between two or more scientific and technical disciplines while chemistry is intertwined with almost all scientific domains. Complementary and synergistic effects have been found in the overlay between sonochemistry and other enabling technologies such as mechanochemistry, microwave chemistry and flow-chemistry. Although their nature and effects are intrinsically different, these techniques share the ability to significantly activate most chemical processes and peculiar phenomena. These studies offer a comprehensive overview of sonochemistry, provide a better understanding of correlated phenomena (mechanochemical effects, hot spots, etc.), and pave the way for emerging applications which unite hybrid reactors.

Microwave-assisted organic syntheses: microwave effect on intramolecular reactions – the Claisen rearrangement of allylphenyl ether and 1-allyloxy-4-methoxybenzene

We examined the possible effect microwaves may have on intramolecular reactions such as the Claisen-type rearrangement process carried out in DMSO solvent and in solvent-free microwave irradiation conditions.

Enhancing decomposition rate of perfluorooctanoic acid by carbonate radical assisted sonochemical treatment

Perfluorooctanoic acid (PFOA) is a recalcitrant organic pollutant in wastewater because of its wide range of applications. Technologies for PFOA treatment have recently been developed. In this study, PFOA decomposition by sonochemical treatment was investigated to determine the effects of NaHCO3 concentrations, N2 saturation, and pH on decomposition rates and defluorination efficiencies. The results showed that PFOA decomposition by ultrasound treatment only (150 W, 40 kHz), with or without saturated N2, was <25% after 4 h reaction. The extent and rate of PFOA decomposition and defluorination efficiencies of PFOA, however, greatly increased with the addition of carbonate radical reagents. PFOA was completely decomposed after 4h of sonochemical treatment with a carbonate radical oxidant and saturated N2. Without saturated N2, PFOA was also decomposed to a high (98.81%) degree. The highest PFOA decomposition and defluorination efficiencies occurred in N2 saturated solution containing an initial NaHCO3 concentration of 30 mM. Sonodecomposition of PFOA with CO3(-) radical was most favorable in a slightly alkaline environment (pH=8.65). There isn't any shorter-chain perfluorinated carboxylic acids detected except fluorine ions in final reaction solution.

Microwaves and their coupling to advanced oxidation processes: enhanced performance in pollutants degradation

This review assesses microwaves (MW) coupled to advanced oxidation processes (AOPs) for pollutants degradation, as well as the basic theory and mechanisms of MW dielectric heating. We addressed the following couplings: MW/H2O2, MW/UV/H2O2, MW/Fenton, MW/US, and MW/UV/TiO2, as well as few studies that tested alternative oxidants and catalysts. Microwave Discharge Electrodeless Lamps (MDELs) are being extensively used with great advantages over ballasts. In their degradation studies, researchers generally employed domestic ovens with minor adaptations. Non-thermal effects and synergies between UV and MW radiation play an important role in the processes. Published papers so far report degradation enhancements between 30 and 1,300%. Unfortunately, how microwaves enhance pollutants is still obscure and real wastewaters scarcely studied. Based on the results surveyed in the literature, MW/AOPs are promising alternatives for treating/remediating environmental pollutants, whenever one considers high degradation yields, short reaction times, and small costs.