Sonochemical fabrication of mesoporous TiO2 inside diatom frustules for photocatalyst

Hydraulic retention time governed the micro/nanostructures of titanium-incorporated diatoms and their photocatalytic activity

Titanium-incorporated diatoms are promising biomaterials to photodegrade micropollutants such as pharmaceuticals and personal care products (PPCPs). Hydraulic retention time (HRT) is a key parameter for diatom cultivation and the incorporation of titanium into diatom frustules. This study assessed how HRT governs the micro/nanostructures, titania (TiO2) content and distribution, and the photocatalytic activity of titanium-incorporated diatom frustules. We cultivated a diatom strain Stephanodiscus hantzschii using a feed solution containing titanium(IV) in membrane bioreactors (MBRs) at a solids retention time (SRT) of 10 d and staged HRTs from 24 to 12 and to 6 h. The decrease in HRT reduced the porosity of diatom frustules but increased their silicon and titania contents. When the HRT decreased from 24 to 12 and to 6 h, the specific surface areas of the diatom decreased from 37.65 ± 3.19 to 31.53 ± 3.71 and to 18.43 ± 2.69 m2·g-1 frustules, while the titanium (Ti) contents increased from 53 ± 14 to 71 ± 9 and to 85 ± 13 mg Ti·g-1 frustules. The increase in the influent flow rates of the MBRs with decreasing HRTs likely enhanced nutrient diffusion inside the diatom valve pores, facilitating the uptake and incorporation of silicon and titanium. The titanium-incorporated frustules were effective in removing two representative PPCPs, bisphenol A (BPA) and N,N-diethyl-meta-toluamide (DEET), from water. As photocatalytic activity depends on the amount of titanium, decreasing the HRT substantially increased the photocatalytic activity of the titanium-incorporated frustules. In batch tests under ultraviolet light, frustules from the diatom cultivated at HRTs of 24, 12, and 6 h had the pseudo-first-order removal (mainly through photodegradation) rate constants of BPA of 0.376, 0.456, and 0.683 h-1, respectively. Under the same experimental condition, the pseudo-first-order removal rate constants of DEET by the frustules cultivated at HRTs of 24, 12, and 6 h increased from 0.270 to 0.330 and to 0.480 h-1.

Advances in ultrasound-assisted synthesis of photocatalysts and sonophotocatalytic processes: A review

Water pollution and the global energy crisis are two significant challenges that the world is facing today. Ultrasound-assisted synthesis offers a simple, versatile, and green synthetic tool for nanostructured materials that are often unavailable by traditional synthesis. Furthermore, the integration of ultrasound and photocatalysis has recently received considerable interest due to its potential for environmental remediation as a low-cost, efficient, and environmentally friendly technique. The underlying principles and mechanisms of sonophotocatalysis, including enhanced mass transfer, improved catalyst-pollutant interaction, and reactive species production have been discussed. Various organic pollutants as dyes, pharmaceuticals, pesticides, and emerging organic pollutants are targeted based on their improved sonophotocatalytic degradation efficiency. Additionally, the important factors affecting sonophotocatalytic processes and the advantages and challenges associated with these processes are discussed. Overall, this review provides a comprehensive understanding of sono-assisted synthesis and photocatalytic degradation of organic pollutants and prospects for progress in this field.

Structural Characterization of Polycrystalline Titania Nanoparticles on C. striata Biosilica for Photocatalytic POME Degradation

The biosilica shell of marine diatoms has emerged as a unique matrix for photocatalysis, owing to its sophisticated architecture with hierarchical nanopores and large surface area. Although the deposition of titania nanoparticles on diatom biosilica has been demonstrated previously, their photocatalytic activity has been tested only for degradation of pure compounds, such as dyes, nitrogen oxide, and aldehydes. The efficiency of such photocatalysts for degradation of mixtures, for instance, industrial wastewaters, is yet to be investigated. Furthermore, reports on the lattice structures and orientation of nanotitania crystals on biosilica are considerably limited, especially for the underexplored tropical marine diatoms. Here, we report an extensive characterization of titania-loaded biosilica from the tropical Cyclotella striata diatom, starting from freshly grown cell cultures to photodegradation of wastewaters, namely, the palm oil mill effluent (POME). As Indonesia is the largest palm oil producer in the world, photocatalytic technology could serve as a sustainable alternative for local treatment of POME. In this study, we achieved a 54% loading of titania on C. striata TBI strain biosilica, as corroborated by XRF analyses, which was considerably high compared to previous studies. Through visualization using HR-TEM, supported by SAED and XRD analyses, nanocrystal TiO₂ appeared to be trapped in an anatase phase with polycrystalline characteristics and distinct crystallographic orientations. Importantly, the presence of C. striata biosilica lowered the band gap of titania from 3.41 eV to around 3.2 eV upon deposition, enabling photodegradation of POME using a broad-range xenon lamp as the light source, mimicking the sunlight. Kinetic analyses revealed that POME degradation using the photocatalysts followed quasi-first-order kinetics, in which the highest titania content resulted in the highest photocatalytic activity (i.e., up to 47% decrease in chemical oxygen demand) and exhibited good photostability throughout the reaction cycles. Unraveling the structure and photoactivity of titania-biosilica catalysts allows transforming marine diatoms into functional materials for wastewater photodegradation.

Metabolically Doping of 3D Diatomaceous Biosilica with Titanium

Diatoms represent, in terms of species number, one of the largest groups of microalgae that have the ability to synthesize phenomenal mineral composites characterized by complex hierarchical structures. Their shells, called frustules, create intricately ornamented structures, reminiscent of the most sophisticated, natural mosaics. Ordinated pore systems perforate siliceous walls of the frustules with diameters ranging from nano to micro-scale, forming openwork three-dimensional silica structures. The use of these features is one of the main challenges in developing new technological solutions. In this study we assess the ability of selected diatom species (Pseudostaurosira trainorii) for metabolic insertion of soluble titanium from the culture medium into the structure of amorphous silica cell walls by its cultivation in laboratory conditions. The study is aimed at obtaining new and strengthening the already existing optical properties of diatomaceous biosilica. The physicochemical properties of the obtained materials have been studied using a series of instrumental methods.

Diatom Biosilica Doped with Palladium(II) Chloride Nanoparticles as New Efficient Photocatalysts for Methyl Orange Degradation

A new catalyst based on biosilica doped with palladium(II) chloride nanoparticles was prepared and tested for efficient degradation of methyl orange (MO) in water solution under UV light excitation. The obtained photocatalyst was characterized by X-ray diffraction, TEM and N₂ adsorption/desorption isotherms. The photocatalytic degradation process was studied as a function of pH of the solution, temperature, UV irradiation time, and MO initial concentration. The possibilities of recycling and durability of the prepared photocatalysts were also tested. Products of photocatalytic degradation were identified by liquid chromatography–mass spectrometry analyses. The photocatalyst exhibited excellent photodegradation activity toward MO degradation under UV light irradiation. Rapid photocatalytic degradation was found to take place within one minute with an efficiency of 85% reaching over 98% after 75 min. The proposed mechanism of photodegradation is based on the assumption that both HO^• and O₂^•− radicals, as strongly oxidizing species that can participate in the dye degradation reaction, are generated by the attacks of photons emitted from diatom biosilica (photonic scattering effect) under the influence of UV light excitation. The degradation efficiency significantly increases as the intensity of photons emitted from biosilica is enhanced by palladium(II) chloride nanoparticles immobilized on biosilica (synergetic photonic scattering effect).

Development of Titania-Integrated Silica Cell Walls of the Titanium-Resistant Diatom, Fistulifera solaris

We report the biological synthesis of titania that is integrated into the silica-based cell walls of a titanium-resistant diatom, Fistulifera solaris. Titania is deposited across the diatom cell walls by simply incubating F. solaris in a culture medium containing a high concentration (2 mM) of a water-soluble organo-titanium compound, titanium(IV) bis(ammonium lactato) dihydroxide (TiBALDH) that would otherwise inhibit the growth of other diatom species. Furthermore, we genetically engineered the interfaces of the diatom cell walls with a titanium-associated peptide, which subsequently increased the Ti/Si atomic ratio by more than 50% (i.e., from 6.2 ± 0.2% to 9.7 ± 0.5%, as identified by inductively coupled plasma-atomic emission spectrometry). The titanium content on the F. solaris silica cell walls is one of the highest reported to date, and comparable to that of chemically synthesized TiO₂-silica composites. Subsequent thermal annealing at 500 °C in air converted the cell wall-bound titania to nanocrystalline anatase TiO₂, a highly photocatalytically active phase. We propose that incubation of the titanium-resistant F. solaris with TiBALDH as demonstrated in this study could be a promising bioprocess toward the scalable synthesis of TiO₂. In addition, the genetic engineering we used to modulate the surface properties of diatom silica cell walls could be extended to synthesize controlled nanomaterials for multiple applications including bioremediation, water purification, and energy conversion/storage.

Silica Nanowire Growth on Coscinodiscus Species Diatom Frustules via Vapor-Liquid-Solid Process

Diatom frustules are a type of porous silicon dioxide microparticle that has long been used in applications ranging from biomedical sensors to dye-sensitized solar cells. The favorable material properties, enormous surface area, and enhanced light scattering capacity support the promise of diatom frustules as candidates for next generation biomedical devices and energy applications. In this study, the vapor-liquid-solid (VLS) method is employed to incorporate silica nanowires on the surface of diatom frustules. Compared to the original frustule structures, the frustule-nanowire composite material's surface area increases over 3-fold, and the light scattering ability increases by 10%. By varying the gold catalyst thickness during the VLS process, tuning of the resultant nanowire length/density is achieved. Through material characterization, it is determined that both float growth and root growth processes jointly result in the growth of the silica nanowires. From a thermodynamics point of view, the preferential growth of the silica nanowires on frustules is found to have resulted from the enormous partial surface area of gold nanoparticles on the diatom frustules. The frustule-nanowire composite materials have potential applications in the development of novel biomedical sensing devices and may greatly enhance next generation solar cell performance.

Mesoporous Titanium Dioxide: Synthesis and Applications in Photocatalysis, Energy and Biology

Mesoporous materials are materials with high surface area and intrinsic porosity, and therefore have attracted great research interest due to these unique structures. Mesoporous titanium dioxide (TiO₂) is one of the most widely studied mesoporous materials given its special characters and enormous applications. In this article, we highlight the significant work on mesoporous TiO₂ including syntheses and applications, particularly in the field of photocatalysis, energy and biology. Different synthesis methods of mesoporous TiO₂-including sol⁻gel, hydrothermal, solvothermal method, and other template methods-are covered and compared. The applications in photocatalysis, new energy batteries and in biological fields are demonstrated. New research directions and significant challenges of mesoporous TiO₂ are also discussed.

Multiple Routes to Smart Nanostructured Materials from Diatom Microalgae: A Chemical Perspective

Diatoms are unicellular photosynthetic microalgae, ubiquitously diffused in both marine and freshwater environments, which exist worldwide with more than 100 000 species, each with different morphologies and dimensions, but typically ranging from 10 to 200 µm. A special feature of diatoms is their production of siliceous micro- to nanoporous cell walls, the frustules, whose hierarchical organization of silica layers produces extraordinarily intricate pore patterns. Due to the high surface area, mechanical resistance, unique optical features, and biocompatibility, a number of applications of diatom frustules have been investigated in photonics, sensing, optoelectronics, biomedicine, and energy conversion and storage. Current progress in diatom-based nanotechnology relies primarily on the availability of various strategies to isolate frustules, retaining their morphological features, and modify their chemical composition for applications that are not restricted to those of the bare biosilica produced by diatoms. Chemical or biological methods that decorate, integrate, convert, or mimic diatoms' biosilica shells while preserving their structural features represent powerful tools in developing scalable, low-cost routes to a wide variety of nanostructured smart materials. Here, the different approaches to chemical modification as the basis for the description of applications relating to the different materials thus obtained are presented.

The highly efficient photocatalytic and light harvesting property of Ag-TiO2 with negative nano-holes structure inspired from cicada wings

The negative replica of biomorphic TiO₂ with nano-holes structure has been effectively fabricated directly from nano-nipple arrays structure of cicada wings by using a simple, low-cost and highly effective sol-gel ultrasonic method. The nano-holes array structure was well maintained after calcination in air at 500 °C. The Ag nanoparticles (10 nm–25 nm) were homogeneously decorated on the surface and to the side wall of nano-holes structure. It was observed that the biomorphic Ag-TiO₂ showed remarkable photocatalytic activity by degradation of methyl blue (MB) under UV-vis light irradiation. The biomorphic Ag-TiO₂ with nano-holes structure showed superior photocatalytic activity compared to the biomorphic TiO₂ and commercial Degussa P25. This high-performance photocatalytic activity of the biomorphic Ag-TiO₂ may be attributed to the nano-holes structure, localized surface plasmon resonance (LSPR) property of the Ag nanoparticles, and enhanced electron-hole separation. Moreover, the biomorphic Ag-TiO₂ showed more absorption capability in the visible wavelength range. This work provides a new insight to design such a structure which may lead to a range of novel applications.

Synthesis of Photoactive Materials by Sonication: Application in Photocatalysis and Solar Cells

In recent years, a good number of methods have become available for the preparation of an important group of photoactive materials for applications in photocatalysis and solar cells. Nevertheless, the benefits derived from preparing those materials through unconventional approaches are very attractive from the green chemistry point of view. This critical review work is focused on sonication as one of these promising new synthetic procedures that allow control over size, morphology, nanostructure and tuning of catalytic properties. Ultrasound-based procedures offer a facile, versatile synthetic tool for the preparation of light-activated materials often inaccessible through conventional methods.

Titanium uptake and incorporation into silica nanostructures by the diatom Pinnularia sp. (Bacillariophyceae)

Diatoms are an ecologically successful group within the phytoplankton, and their special feature is a biofabricated silica cell encasement called a frustule. These frustules attract interest in material technology, and one potential application is to use them in solar cell technology. The silica frustule with its nanoscaled pattern is interesting per se, but the utility is enhanced if we succeed in incorporating other elements. Titanium is an interesting element because its oxide is a semi-conductor with a high band gap. However, doping with relevant elements through bioincorporation is challenging, and it is necessary to understand the biology involved in element uptake and incorporation. Here we present data on bioincorporation of Ti into the silica frustules of the pennate diatom Pinnularia sp. (Ehrenberg) and show that the distribution of the incorporated Ti is inhomogeneous both between and within valves. More than a tenfold increase of Ti in newly synthesised valves was achieved, and increased Ti around the pores was confirmed by both EDS and EELS analyses. HAADF STEM spectroscopy revealed a grainy surface with amorphous silica particles of 4 to 5 nm in size. These observations are explained by what is known from the physico-chemical processes involved in biosilification and frustule formation, looking into it from a biological point of view.

Formation mechanism and optical properties of CdMoO4 and CdMoO4:Ln3+ (Ln = Pr, Sm, Eu, Dy, Ho and Er) microspheres synthesized via a facile sonochemical route

3D well-defined CdMoO₄ and CdMoO₄:Ln³⁺ (Ln = Pr, Sm, Eu, Dy, Ho and Er) microspheres have been successfully synthesized using a facile sonochemical route.