Sonocatalytic degradation of Acid Blue 92 using sonochemically prepared samarium doped zinc oxide nanostructures

Superb bio-effectiveness of Cobalt (II) phthalocyanine and Ag NPs adorned Sm-doped ZnO nanorods/cuttlefish bone to annihilate Trichinella spiralis muscle larvae and adult worms: In-vitro evaluation

Herein, innovative biocides are designed for the treatment of Trichinella spiralis muscle larvae (ML) and adult worms. Samarium-doped ZnO nanorods (Sm-doped ZnO) are stabilized onto the laminar structure of cuttlefish bone (CB) matrix and adorned by either Ag NPs or cobalt phthalocyanine (CoPc) species. Physicochemical characteristics of such nanocomposites are scrutinised. Adorning of Sm-doped ZnO/CB with Ag NPs shortens rod-like shaped Sm-doped ZnO nanoparticles and accrues them, developing large-sized detached patches over CB moiety. Meanwhile, adorning of Sm-doped ZnO/CB by CoPc species degenerates CB lamellae forming semi-rounded platelets and encourages invading of Sm-doped ZnO nanorods deeply inside gallery spacings of CB. Both nanocomposites possess advanced parasiticidal activity, displaying quite intoxication for ML and adult worms (≥88% mortality) within an incubation period of <48 h at concentrations around 200 μg/ml. CoPc@Sm-doped ZnO/CB nanocomposite exhibits faster killing efficiency of adult worms than that of Ag@Sm-doped ZnO/CB at a concentration of ∼75 μg/ml showing entire destruction of parasite after 24 h incubation with the former nanocomposite and just 60% worm mortality after 36 h exposure to the later one. Morphological studies of the treated ML and adult worms show that CoPc@Sm-doped ZnO/CB exhibits a destructive impact on the parasite body, creating featureless and sloughed fragments enriched with intensive vacuoles. Hybridization of cuttlefish bone lamellae by CoPc species is considered a springboard for fabrication of futuristic aggressive drugs against various food- and water-borne parasites.

Research Progress on the Degradation of Organic Pollutants in Wastewater via Ultrasound/Periodate Systems: A Review

In recent years, the efficient removal of organic pollutants from wastewater has emerged as a critical area of global research interest. Against this backdrop, an array of innovative technologies for wastewater treatment has been developed. Among numerous advanced oxidation processes (AOPs), periodate (PI), an emerging oxidizing agent in AOPs, has garnered significant attention from researchers. Particularly, the integration of ultrasound (US)-activated PI systems has been recognized as an exceptionally promising approach for the synergistic degradation of organic pollutants in wastewater. In this paper, we conducted a thorough analysis of the mechanisms underlying the degradation of organic pollutants using the US/PI system. Furthermore, we comprehensively delineated the effects of ultrasonic power, periodate concentration, temperature, pH, coexisting inorganic ions, and dissolved organic matter on the removal efficiency of organic pollutants and summarized application cases of the US/PI system for the degradation of different pollutants. Finally, we also offered prospective discussions on the future trajectories of US/PI technology development.

Enhanced mitigation of acidic and basic dyes by ZnO based nano-photocatalysis: current applications and future perspectives

Dye wastewater possess immense toxicity with carcinogenic properties and they persist in environment owing to their stability and resistance to chemical and photochemical changes. The bio degradability of dye-contaminated wastewater is low due to its complex molecular structure. Nano-photocatalysts based on zinc oxide are reported as one of the effective metal oxides for dye remediation due to their photostability, enhanced UV and visible absorption capabilities in an affordable manner. An electron-hole pair forms when electrons in the valence band of ZnO nano-photocatalyst transfer into the conduction band by absorbing UV light. The review article presents a detailed review on ZnO applications for treating acidic and basic dyes along with the dye degradation performance based on operating conditions and photocatalytic kinetic models. Several acidic and basic dyes have been shown to degrade efficiently using ZnO and its nanocomposites. Higher removal percentages for crystal violet was reported at pH 12 by ZnO/Graphene oxide catalyst under 400 nm UV light, whereas acidic dye Rhodamine B at a pH of 5.8 was degraded to 100% by pristine ZnO. The mechanism of action of ZnO nanocatalysts in degrading the dye contamination are reported and the research gaps to make these agents in environmental remediation on real time operations are discussed.

Ultrasound-Assisted Adsorption of Perchlorate Using Calcined Hydrotalcites and the Thermal Stabilization Effect of Recycled Adsorbents on Poly(vinyl chloride)

Due to their high anion exchange and memory effect, the layered double hydroxides (LHDs) have wide applications for some areas. In this work, an efficient and green recycling route for layered double hydroxide based adsorbents is proposed specifically for application as a poly(vinyl chloride) (PVC) heat stabilizer without requiring secondary calcination. Conventional magnesium-aluminum hydrotalcite was synthesized using the hydrothermal method followed by removal of carbonate anion (CO₃^2-) between LDH layers by calcination. The adsorption of perchlorate anion (ClO₄^-) by the memory effect of calcined LDHs with and without ultrasound assistance was compared. Using ultrasound assistance, the maximum adsorption capacity of the adsorbents (291.89 mg/g) was increased, and the adsorption process was fitted using the kinetic Elovich rate equation (R² = 0.992) and Langmuir adsorption model (R² = 0.996). This material was characterized using XRD, FT-IR, EDS, and TGA which demonstrated that ClO₄^- was intercalated into the hydrotalcite layer successfully. The recycled adsorbents were used to augment a commercial calcium-zinc-based PVC stabilizer package applied in a epoxidized soybean oil plasticized cast sheet which is based on an emulsion type PVC homopolymer resin. Use of perchlorate intercalated LDH augmentation yielded significant improvement to static heat resistance as indicated by the degree of discoloration with a life extension of approximately 60 min. The improved stability was corroborated by evaluation of HCl gas evolved during thermal degradation using conductivity change curves and the Congo red test.

A facile synthesis of K3PMo12O40/WO3 crystals for effective sonocatalytic performance

Proper treatment of hazardous contaminants in the air, land, and water is crucial to environmental remediation. Sonocatalysis, by using ultrasound and suitable catalysts, has shown its potential in organic pollutant removal. In this work, K₃PMo₁₂O₄₀/WO₃ sonocatalysts were fabricated via a facile solution method at room temperature. Techniques such as powder X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, and X-ray photoelectron spectroscopy were used to characterize the structure and morphology of the products. By using the K₃PMo₁₂O₄₀/WO₃ sonocatalyst, an ultrasound-assisted advanced oxidation process has been developed for the catalytic degradation of methyl orange and acid red 88. Almost all dyes were degraded within 120 min of ultrasound baths, proving that the K₃PMo₁₂O₄₀/WO₃ sonocatalyst has the advantage of speeding up the decomposition of contaminants. The impacts of key parameters, including catalyst dosage, dye concentration, dye pH, and ultrasonic power were evaluated to understand and reach optimized conditions in sonocatalysis. The remarkable performance of K₃PMo₁₂O₄₀/WO₃ in the sonocatalytic degradation of pollutants provides a new strategy for the application of K₃PMo₁₂O₄₀ in sonocatalysis.

Synthesis of magnetic graphene-like carbon nitride-cobalt ferrite (g-C3N4/CoFe2O4) nanocomposite for sonocatalytic remediation of toxic organic dyes

A novel magnetic g-C₃N₄/CoFe₂O₄ nanocomposite was successfully synthesized by a simple hydrothermal method and applied as a new graphene-like carbon nitride-based sonocatalyst for sonodegradation of pollutant dyes. The as-prepared samples were characterized by using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance spectroscopy (DRS), BET surface area measurements and photoluminescence (PL) spectroscopy. The results indicate that the nanocomposite sample is composed of spherical CoFe₂O₄ nanoparticles adhered to g-C₃N₄ naosheets. The g-C₃N₄/CoFe₂O₄ nanocomposites were used as a new magnetically separable sonocatalyst in H₂O₂-assisted sonodegradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes in aqueous media. The results showed complete degradation (ca. 100%) of dyes within short times (30-35 min). The sonocatalytic activity of graphitic carbon nitride (g-C₃N₄) was greatly enhanced with CoFe₂O₄ modification. Trapping experiments indicated that the g-C₃N₄/CoFe₂O₄ nanocomposites serves as a generator of hydroxyl radical (˙OH) via activation of H₂O₂ for degradation of dyes under ultrasound irradiation. Furthermore, the magnetic sonocatalyst can be separated from solution by an external magnet and reused several times without observable loss of activity. The possible mechanism of sonocatalytic activity was also proposed according to experimental results.

Using a promising biomass-based biochar in photocatalytic degradation: highly impressive performance of RHB/SnO2/Fe3O4 for elimination of AO7

The release of industrial dyes into the environment has recently increased, resulting in harmful effects on people and ecosystems. In recent years, the use of adsorbents in photocatalytic nanocomposites has attracted significant interest due to their low cost, efficiency, and eco-friendly physical and chemical characteristics. Herein, Acid Orange 7 (AO7) removal was investigated by photocatalytic degradation using Rice Rusk Biochar (RHB), Tin (IV) Oxide (SnO₂), and Iron Oxide (Fe₃O₄) as heterogeneous nanocomposite. After the preparation of RHB, the nanocomposite was synthesized and characterized using Field Emission Scanning Electron Microscope (FESEM), X-ray Powder Diffraction (XRD), Brunauer-Emmett-Teller (BET), and Fourier-Transform Infrared Spectroscopy (FT-IR). To optimize the elimination of AO7 by the One-Factor-At-a-Time (OFAT) method, effective parameters including mixing ratio (RHB:SnO₂:Fe₃O₄), dye concentration, solution pH, and nanocomposite dose were studied. The results showed that the removal efficiency of AO7 after 120 min under the optimal mixing ratio of 1:1.5:0.6, dye concentration of 75 mg/l, solution pH of 4, and nanocomposite dose of 0.7 g/l was 92.37%. Moreover, Chemical Oxygen Demand (COD) and Total Organic Carbon (TOC) removal rates were obtained at 82.22 and 72.22%, respectively. The Average Oxidation State (AOS) and Carbon Oxidation State (COS) of the AO7 solution were increased after the process, indicating biodegradability improvement. Various scavenger effects were studied under optimal conditions, and the results revealed that O₂^- and H⁺ reactive species play a crucial role in the photocatalytic degradation of AO7. The reusability and stability of nanocomposite were tested in several consecutive experiments, and the degradation efficiency was reduced from 92 to 79% after five consecutive cycles. It is expected that this research contributes significantly to the utilization of agricultural waste in photocatalytic nanocomposites for the degradation of environmental pollutants.

Boosted sono-oxidative catalytic degradation of Brilliant green dye by magnetic MgFe2O4 catalyst: Degradation mechanism, assessment of bio-toxicity and cost analysis

The magnetic MgFe₂O₄ nanoparticles (NPs) were fabricated via a facile co-precipitation technique and was comprehensively characterized by XRD, FTIR, SEM, EDX and VSM. The prepared NPs were used as catalyst in presence of ultrasound (US) irradiation to activate persulfate (PS) for generation of sulfate radicals (SO₄^·-) for boosted degradation of toxic Brilliant Green (BG) dye. Preliminary experiments revealed that highest BG dye degradation efficiency of 91.63% was achieved at MgFe₂O₄ catalyst dose of 1.0 g/L, PS dose of 300 mg/L, and initial dye concentration of 70 ppm within 15 min of US irradiation. However, only US, US in presence of PS oxidation and US in presence of MgFe₂O₄ catalyst have shown 20.2%, 83.6% and 45.0% of BG dye removal, respectively. Furthermore, response surface methodology (RSM) based central composite design (CCD) was executed to investigate the effect of interaction between independent variables such as MgFe₂O₄ catalyst dose (0.5-1.5 g/L), PS dose (150-350 mg/L), initial BG dye concentration (50-150 ppm) and US irradiation time (4-12 min). The RSM based quadratic model was used to predict the experimental data, and the prediction accuracy was confirmed by analysis of variance (R² = 0.98). The established RSM model has predicted the optimum experimental conditions as MgFe₂O₄ catalyst dose of 0.75 g/L, PS dose of 300 mg/L, initial dye concentration of 75 ppm and sonication time of 10 min. Subsequently, the treatment cost analysis was performed for all thirty experimental runs of CCD, and the RSM predicted response was found to be evidently optimum as this has delivered best economic condition (140 $/kg of BG removed) with respect to relative dye removal (%). COD removal and residual sulfate analysis have demonstrated satisfactory reduction of COD (90.31%) as well as sulfate ions (42.87 ppm) in the dye solution after treatment. Results of degradation pathway analysis portrayed the transformation of BG molecule (M/Z ratio 385) into simpler fractions with M/Z ratio of 193, 161, 73, and 61. Moreover, the toxicity analysis revealed that sono-catalytically activated PS system has efficiently reduced the toxicity level of BG dye from 93.9% to 5.13%.

A Sm-doped Egeria-densa-like ZnO nanowires@PVDF nanofiber membrane for high-efficiency water clean

A biomimetic Egeria-densa-like hybrid composite nanofiber membrane was fabricated to degrade organic pollutants in water, with PVDF nanofibers as stems to provide support, and ZnO nanowires as leaves to provide active sites. The Sm-doped ZnO nanowires@PVDF nanofiber membranes were characterized by FE-SEM, X-ray photoelectron spectroscopy, Fourier transform infrared, X-ray diffraction, and UV-vis diffuse reflectance spectrometer. Compared with the pure ZnO nanowires@PVDF nanofiber membrane, the Sm-doped membrane showed higher photocatalytic performance. The excellent photocatalytic activity was attributed to the increased specific surface area and the decreased bandgap of ZnO nanowires after Sm doping, which inhibited the recombination rate of electrons and holes and improved the absorption of visible light. We found that the superoxide free radicals (O₂^-) played a critical role in photocatalytic degradation. The Sm-doped ZnO nanowires@PVDF nanofiber membrane exhibited good stability after 5 cycles of RhB degradation. We believe such Sm-doped hybrid membrane can work as an effective photocatalyst for wastewater treatment.

Magnetic separable zeolite-type ZSM-5/CdS nanorods/MoS2 nanoflowers/MnFe2O4 quaternary nanocomposites: synthesis and application of sonocatalytic activities

Magnetic zeolite-type ZSM-5/CdS nanorods/MoS₂ nanoflowers/MnFe₂O₄ quaternary nanocomposites were synthesized and used for the sonocatalytic degradation of organic pollutants.

Synthesis and characterization of a novel manganese ferrite–metal organic framework MIL-101(Cr) nanocomposite as an efficient and magnetically recyclable sonocatalyst

A magnetic MnFe₂O₄/MIL-101(Cr) nanocomposite was synthesized and applied as a novel sonocatalyst for enhanced degradation of organic dye pollutants.

Stone cutting industry waste-supported zinc oxide nanostructures for ultrasonic assisted decomposition of an anti-inflammatory non-steroidal pharmaceutical compound

Powdered stone waste (PSW) obtained from a stone cutting industrial unit was applied as support for the immobilization of nano-sized ZnO to be utilized as an effective catalyst for the catalytic conversion of acetaminophen (ACE) under ultrasonication. The incorporation of ZnO nanostructures into PSW structure enhanced the specific surface area and pore volume of the as-prepared nanocompound. The change in the value of zero point of charge (pH_zpc) of the PSW after being covered also demonstrated the good immobilization and distribution of ZnO nanostructures on the surface of PSW. The sonocatalysis of ACE over ZnO/PSW followed pseudo-first order kinetic (reaction rate of 2.27 × 10^-2 1/min). The highest degradation efficiency of 98.1% was attained when the ZnO/PSW-contained sono-reactor was irradiated by UVC light. The presence of t-butanol led to the lowest degradation efficiency (57.7%), indicating that the sonocatalytic conversion of ACE was hydroxyl radical (OH)-dependent. Although the mineralization efficiency of ACE by the process was not excellent, bio-toxicity assessment on the effluent revealed decreasing the inhibition percent from 50.8 to 16.7% within reaction time of 240 min.

Enhanced sonocatalytic performance of ZnTi nano-layered double hydroxide by substitution of Cu (II) cations

In this research, a series of CuZnTi-LDHs with different Cu²⁺/Zn²⁺ molar ratio were synthesized by co-precipitation method with the purpose of improving the sonocatalytic performance of ZnTi-LDH. All the LDH samples were synthesized by a facile co-precipitation process. The as-prepared LDHs were characterized by Powder X-ray diffraction (XRD), Field emission-scanning electron microscopy (FESEM), Transition electron microscopy (TEM), Brunauer-Emmelt-Teller (BET) analysis, and UV-visible diffuse reflectance spectroscopy (DRS) analysis. The results showed that Cu²⁺ substitution can significantly enhance the sonocatalytic properties of ZnTi-LDH. The Methylene blue degradation percentage over ZnTi-LDH reached 30% in 90 min, whilst this percentage reaches 71% over CuZnTi-LDH (1:1). The role of the Cu²⁺ incorporation on the observed enhancement in sonocatalytic performance was revealed by investigating the effect of radical scavengers on degradation efficiency and DRS spectra of ZnTi-LDH and CuZnTi-LDH (1:1). Benzoquinone (BQ), ammonium oxalate and tert-Bu lead to 22.5%, 53.5% and 74.6% decrease in degradation percentage by CuZnTi-LDH (1:1). However, the degradation efficiency showed 16.6%, 3.3% and 63.3% reduction in the presence of BQ, ammonium oxalate and tert-Bu respectively, in dye degradation by ZnTi-LDH. DRS spectra demonstrated that the band gap of the LDH decreases by Cu²⁺ substitution. The effect of operational parameters on sonodegradation was investigated as well. The kinetics of sonodegradation reaction obeyed the first order reaction kinetics with R² of 0.95.

A sono-photocatalyst for humic acid removal from water: Operational parameters, kinetics and mechanism

As a precursor of disinfection byproducts, humic acid (HA) has adverse effects on aquatic environments and human health. Currently, many advanced oxidation processes (AOPs) have been proposed to remove HA from drinking water, one of which is photocatalysis. However, the long reaction time required for degradation and drawbacks of the photocatalysts limit the large-scale application of photocatalysis. Therefore, two principal objectives were achieved in this work. First regarding the technology, we combined photocatalysis with ultrasonic waves to remove HA. Second regarding the photocatalyst, quaternary Fe₃O₄/TiO₂-N-GO (FTNG) sono-photocatalysts with different amounts of Fe₃O₄ were first synthesized using a simple hydrothermal method. Characterizations were performed to confirm the successful synthesis of the sono-photocatalyst and to determine some of its properties. The influence of different experimental factors such as Fe₃O₄ content, ultrasonic power, catalyst dosage and initial HA concentration were studied. The first-order kinetic and second-order kinetic equations were used to simulate the experimental data. The results showed that FTNG-0.2 with 0.2 g of Fe₃O₄, which was added upon preparation, showed the highest sono-photocatalytic ability. In our experimental setup, greater than 99% removal efficiency (UV₂₅₄) and 94% mineralization rate (TOC) were achieved within 90 min at the optimum conditions (60 W ultrasound power and 1.0 g/L catalyst dosage for 30 mg/L HA). Compared with the pseudo-first-order kinetic model, pseudo-second-order model fitted better with the experimental data and it had higher R² values of 0.92, 0.98 and 0.98 for 30, 40 and 50 mg/L of HA, respectively. According to the scavenging tests and the ESR analysis, both of the OH and O₂^- were produced in the reaction, however, O₂^- radicals were assumed to be the dominating reactive species for the HA degradation. Moreover, after five repetitive experiments, the removal efficiency of HA can still reach 88.5%, indicating high stability of FTNG-0.2 sono-photocatalyst. The mechanism of degradation of HA by FTNG-0.2 in sono-photocatalytic system was mentioned based on several factors including the ultrasonic cavitation effect, Fenton-like reactions, photocatalytic reactions, etc. In fact, this was the first study to treat HA through sono-photocatalytic process, which showed great potential in drinking water treatment.

Fabrication of graphene-oxide/β-Bi2O3/TiO2/Bi2Ti2O7 heterojuncted nanocomposite and its sonocatalytic degradation for selected pharmaceuticals

A graphene-oxide (GO)/β-Bi₂O₃/TiO₂/Bi₂Ti₂O₇ heterojuncted nanocomposite, designated as GBT, was synthesized via a two-step hydrothermal process. The sonocatalytic activity of the GBT was evaluated at several frequencies (28, 580, and 970 kHz) and compared with Bi-doped GO (GB) and Ti-doped GO (GT). Transmission electron microscopy images showed heterojuncted crystal structures of Bi and Ti on GO, and X-ray diffraction patterns verified that the crystal structures consisted of β-Bi₂O₃, TiO₂, and Bi₂Ti₂O₇ nanocomposites. Energy-dispersive X-ray spectroscopy revealed a higher proportion of metal on GBT surfaces compared with GB and GT surfaces. The energy band gaps of GT, GB, and GBT were 3.0, 2.8, and 2.5 eV, respectively. Two pharmaceuticals (PhACs; carbamazepine [CBZ] and acetaminophen [ACE]) were selected and treated under sonolytic conditions at frequencies of 28, 580, and 970 kHz at a power level of 180 W L^-1. The selected pharmaceuticals, present at initial concentrations of 20 μM, were reduced by over 99% by ultrasonic irradiation in the presence of GBT. The 580 kHz treatment achieved the most rapid organic removal among the frequencies tested. The removal kinetic of CBZ was higher than that of ACE owing to its relatively high hydrophobicity. High sonocatalytic activity of GBT was observed through measurement of H₂O₂ in solution. Because of its low band gaps and high surface activity, GBT exhibited higher sonolytic activity in removing selected PhACs than GT or GB.

A review on heterogeneous sonocatalyst for treatment of organic pollutants in aqueous phase based on catalytic mechanism

Heterogeneous sonocatalysis, as an emerging advanced oxidation process (AOP), has shown immense potential in water treatment and been widely demonstrated to remove persistent organic compounds in the past decade. The present article aims to provide a comprehensive review on the development of a heterogeneous catalyst for enhancing the ultrasonic degradation rate of organic pollutants from a viewpoint of sonocatalytic mechanism. The rational design and fundamentals for preparing sonocatalysts are presented in the context of facilitating the heterogeneous nucleation and photo-thermal-catalytic effects as well as considering the mechanical stability and separation capacity of the heterogeneous catalyst. In addition, some new trends, ongoing challenges and possible methods to overcome these challenges are also highlighted and proposed.

A novel Z-scheme sonocatalyst system, Er3+:Y3Al5O12@Ni(Fe0.05Ga0.95)2O4-Au-BiVO4, and application in sonocatalytic degradation of sulfanilamide

A novel Z-scheme coated composite, Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, was designed for sonocatalytic degradation of sulfanilamide and fabricated by sol-hydrothermal and calcination methods. The prepared sample was characterized by X-ray diffractometer (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), UV-vis diffuse reflectance spectra (DRS), fourier transform infrared (FT-IR) spectra, Raman spectra and photoluminescence (PL) spectra. In Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, Ni(Fe_0.05Ga_0.95)₂O₄ and BiVO₄ form a Z-scheme sonocatalytic system, Er³⁺:Y₃Al₅O₁₂ as an up-conversion luminescence agent (from visible-light to ultraviolet-light) provides the ultraviolet-light for satisfying the energy demand of wide band-gap Ni(Fe_0.05Ga_0.95)₂O₄ and Au nanoparticles as co-catalyst forms more active sites to enrich electrons. Also, Au nanoparticles as conductive channels promotes the electrons (e^-) from conduction band of BiVO₄ to transfer to valence band of Ni(Fe_0.05Ga_0.95)₂O₄. Due to the characteristics of valence state diversity, the Fe³⁺ and V⁵⁺ constitute a redox reaction recombination system, which can also push electrons (e^-) on conduction band of BiVO₄ to quickly transfer to valence band of Ni(Fe_0.05Ga_0.95)₂O₄. The sonocatalytic activity of Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄ nanocomposite was detected through degradation of sulfanilamide under ultrasonic irradiation. A high sonocatalytic degradation ratio (95.64%) of sulfanilamide can be obtained when the conditions of 10.00 mg/L sulfanilamide, 1.00 g/L Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, 300 min ultrasonic irradiation and 100 mL total volume were adopted. Some factors such as ultrasonic irradiation time and cycle number on the sonocatalytic degradation efficiency are also investigated by using TOC and UV-vis spectroscopy. Subsequently, the effects of hydroxyl radicals (OH) and hole scavengers were investigated to elaborate the mechanism. The researches show that the prepared Z-scheme Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄ coated composite displayed an excellent sonocatalytic activity in degradation of sulfanilamide under ultrasonic irradiation.

Synthesis and characterization of a series of novel perovskite-type LaMnO3/Keggin-type polyoxometalate hybrid nanomaterials for fast and selective removal of cationic dyes from aqueous solutions

In this paper, Keggin-type heteropoly acids H₃PMo₁₂O₄₀ (PMo₁₂), H₃PW₁₂O₄₀ (PW₁₂) and H₄SiW₁₂O₄₀ (SiW₁₂) were successfully supported on silica-coated perovskite type LaMnO₃ nanoparticles by a simple acid-base reaction. These novel hybrid nanomaterials (denoted as LaMnO₃@SiO₂/PMo₁₂ (1), LaMnO₃@SiO₂/PW₁₂ (2), and LaMnO₃@SiO₂/SiW₁₂ (3)) were characterized by means of FT-IR, PXRD, inductively coupled plasma (ICP) spectrometry, SEM, EDX, TEM and BET surface area analysis. Furthermore, the adsorption abilities of 1-3 were tested towards cationic methylene blue (MB) and anionic methyl orange (MO) dyes. The results revealed that the MB dye can be removed almost completely (≥98%) by adsorbents 1-3 in 1, 30 and 0.5 minutes, respectively. For the most efficient adsorbent 3, the effects of the initial concentration and the initial pH values of MB solution on its adsorption ability were examined. Furthermore, the selective adsorption of the hybrid materials towards mixed MB & MO solution was investigated. The nanomaterials 1-3 could be easily separated from the aqueous solution and reused several times without any impact on their adsorption abilities and structures.

ZnFe-Cl nanolayered double hydroxide as a novel catalyst for sonocatalytic degradation of an organic dye

ZnFe nanolayered double hydroxide (NLDH) with anions of Cl^- in its interlayer space was synthesized using a facile co-precipitation method. The synthesized ZnFe-Cl NLDH was characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), N₂ adsorption/desorption, diffuse reflectance spectroscopy (DRS) and point of zero charge pH (pHpzc) analyses. In this research, the sonocatalytic activity of the as-prepared NLDH was investigated for removal of acid red 17 as model pollutant. The effects of the operating parameters including sonocatalyst concentration, pH, initial dye concentration, intensity of ultrasonic irradiation and the presence of radical scavengers and process enhancers were studied on the sonocatalytic degradation of acid red 17. The decreased decolorization efficiency in the presence of the radical scavengers confirmed that the free radicals play the basic roll in the degradation of acid red 17 molecules. In addition a probable mechanism for degradation of acid red 17 through the sonocatalytic process was proposed according to the identified intermediates detected using gas chromatography-mass (GC-MS) spectroscopy.

Ultrasonic impregnation of MnO2/CeO2 and its application in catalytic sono-degradation of methyl orange

MnO₂/CeO₂ catalyst was prepared by ultrasonic impregnation method. The traditional and stirring impregnation methods were used as control. Results showed that ultrasonic impregnation was the best synthesis method. The impregnation time was shortened from 120 min (traditional method) to 20 min, the specific surface area of catalyst was three times larger, and the catalytic activity of catalyst was also the highest. Furthermore, MnO₂ had crystalline structure and distributed uniformly on the support, CeO₂. The preparing conditions were further examined and the optimal conditions were found to be: 20 min of ultrasonic impregnation, 4.3 mol/L of manganese nitrate concentration and 450 °C of calcination temperature. The so prepared catalyst removed 94% of methyl orange in 30 min with a dosage of 0.5 g/L. The efficiency was 77.7% and 85.9% for traditional and stirring impregnation method under the same experimental conditions. The reaction process involved two stages: adsorption-dominated and degradation-dominated stages. The reaction rate constant of adsorption-dominated stage had little difference. However, compared with traditional impregnation, the reaction rate constant of degradation-dominated stage improved from 0.01 to 0.14 min^-1 by ultrasonic impregnation. Mechanism analysis showed that the activity of ultrasonic impregnation MnO₂/CeO₂ was improved by the effects of acoustic cavitation and ultrasound oscillation on solid-liquid transport and distribution status.

Ultrasound-assisted degradation of organic dyes over magnetic CoFe2O4@ZnS core-shell nanocomposite

Magnetic CoFe₂O₄@ZnS core-shell nanocomposite was successfully synthesized via one-step hydrothermal decomposition of zinc(II) diethanoldithiocarbamate complex over CoFe₂O₄ nanoparticles at low temperature of 200°C. The obtained nanocomposite was characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, UV-Vis spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, magnetic measurements, and Brunauere-Emmette-Teller. The results confirmed the formation of CoFe₂O₄@ZnS nanocomposite with the average crystallite size of 18nm. The band gap of 3.4eV was obtained using UV-vis absorption of CoFe₂O₄@ZnS nanocomposite, which made it a suitable candidate for sono-/photo catalytic processes. This nanocomposite was applied as a novel sonocatalyst for the degradation of organic pollutants under ultrasound irradiation. The results showed complete degradation of methylene blue (MB) (25mg/L) within 70min in the presence of CoFe₂O₄@ZnS nanocomposite and H₂O₂ (4mM). The trapping experiments indicated that OH radicals are the main active species in dye degradation. In addition, sonocatalytic activity of the CoFe₂O₄@ZnS nanocomposite was higher than those of pure ZnS and CoFe₂O₄, showing that the combining ZnS with magnetic CoFe₂O₄ could be an excellent choice to improve its sonocatalytic activity. The nanocomposite could be magnetically separated and reused without any observable change in its structure and performance even after five consecutive runs.

Sonocatalytic degradation of ciprofloxacin using synthesized TiO2 nanoparticles on montmorillonite

TiO₂/Montmorillonite (TiO₂/MMT) nanocomposite as sonocatalyst was produced by immobilizing synthesized TiO₂ on the surface of montmorillonite. The characteristics of produced nanocomposite were investigated using XRD, XRF, FTIR, TEM, SEM, EDX, UV-vis DRS and nitrogen adsorption-desorption analyses. The synthesized TiO₂ and TiO₂/MMT samples were applied as catalysts for sonocatalytic degradation of ciprofloxacin (CIP). The performance of the TiO₂/MMT was greater than pure TiO₂ sample in treatment of CIP solution. The degradation efficiency of the CIP by sonocatalytic process was affected by solution pH, catalyst dosage, initial CIP concentrations and ultrasonic power. Degradation efficiency of 65.01% was obtained at the pH of 6, catalyst dosage of 0.2gL^-1, initial CIP concentration of 10mgL^-1 and ultrasonic power of 650WL^-1. It was observed that the presence of inorganic and organic scavengers suppressed the performance of sonocatalytic process. The stability of the nanocomposite was studied in several successive experiments, and the degradation efficiency declined only 61.48% after 4 repeated experiments. The main degradation by-products were recognized by GC-MS method to propose the possible sonocatalytic mechanism for the degradation of CIP.

Preparation of Er3+:Y3Al5O12/WO3-KNbO3 composite and application in treatment of methamphetamine under ultrasonic irradiation

Er³⁺:Y₃Al₅O₁₂/WO₃-KNbO₃ composite powder as an effective sonocatalyst was prepared via collosol-gelling-hydrothermal and high-temperature calcination methods. The textures of materials were observed by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). In order to estimate the sonocatalytic activity of Er³⁺:Y₃Al₅O₁₂/WO₃-KNbO₃ composite powder, the sonocatalytic degradation of methamphetamine (MAPA) was performed. Furthermore, the influences of mass ratio of WO₃ and KNbO₃, ultrasonic irradiation time, catalyst addition amount, initial methamphetamine (MAPA) concentration and used times on the sonocatalytic degradation of methamphetamine (MAPA) caused by Er³⁺:Y₃Al₅O₁₂/WO₃-KNbO₃ composite powder were investigated by using gas chromatography. Under optimal conditions of 1.00g/L Er³⁺:Y₃Al₅O₁₂/WO₃-KNbO₃ addition amount and 10.00mg/L methamphetamine (MAPA) initial concentration, 68% of methamphetamine (MAPA) could be removed after 150min ultrasonic irradiation. The experimental results showed that the Er³⁺:Y₃Al₅O₁₂/WO₃-KNbO₃ as sonocatalyst displayed an excellent sonocatalytic activity in degradation of methamphetamine (MAPA) under ultrasonic irradiation.

Production of pyrite nanoparticles using high energy planetary ball milling for sonocatalytic degradation of sulfasalazine

Sonocatalytic performance of pyrite nanoparticles was evaluated by the degradation of sulfasalazine (SSZ). Pyrite nanoparticles were produced via a high energy mechanical ball milling (MBM) in different processing time from 2h to 6h, in the constant milling speed of 320rpm. X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FT-IR) analysis and Brunauer-Emmett-Teller (BET) confirmed the production of pyrite nanoparticles during 6h of ball milling with the average size distribution of 20-80nm. The effects of various operational parameters including pH value, catalyst amount (mg/L), SSZ concentration (mg/L), ultrasonic frequency (kHz) and reaction time on the SSZ removal efficiency were examined. The obtained results showed that the maximum removal efficiency of 97.00% was obtained at pH value of 4, catalyst dosage of 0.5g/L, SSZ concentration of 10mg/L and reaction time of 30min. Experimental results demonstrated that the kinetic of the degradation process can be demonstrated using Langmuir-Hinshelwood (L-H) kinetic model. The effect of different inorganic ions such as Cl^-, CO₃^2- and SO₄^2- was investigated on the L-H reaction rate (k_r) and adsorption (K_s) constants. Results showed that the presence of the mentioned ions significantly influenced the L-H constants. The impact of ethanol as a OH radical scavenger and some enhancers including H₂O₂ and K₂S₂O₈ was investigated on the SSZ removal efficiency. Accordingly, the presence of ethanol suppressed SSZ degradation due to the quenching of OH radicals and the addition of K₂S₂O₈ and H₂O₂ increased the SSZ removal efficiency, due to the formation of SO₄^- and additional OH radicals, respectively. Under the identical conditions of operating parameters, pyrite nanoparticles maintained their catalytic activity during four consecutive runs.

Heterogeneous sono-Fenton-like process using martite nanocatalyst prepared by high energy planetary ball milling for treatment of a textile dye

High energy planetary ball milling was applied to prepare sono-Fenton nanocatalyst from natural martite (NM). The NM samples were milled for 2-6h at the speed of 320rpm for production of various ball milled martite (BMM) samples. The catalytic performance of the BMMs was greater than the NM for treatment of Acid Blue 92 (AB92) in heterogeneous sono-Fenton-like process. The NM and the BMM samples were characterized by XRD, FT-IR, SEM, EDX and BET analyses. The particle size distribution of the 6h-milled martite (BMM₃) was in the range of 10-90nm, which had the highest surface area compared to the other samples. Then, the impact of main operational parameters was investigated on the process. Complete removal of the dye was obtained at the desired conditions including initial pH 7, 2.5g/L BMM₃ dosage, 10mg/L AB92 concentration, and 150W ultrasonic power after 30min of treatment. The treatment process followed pseudo-first order kinetic. Environmentally-friendly modification of the NM, low leached iron amount and repeated application at milder pH were the significant benefits of the BMM₃. The GC-MS was successfully used to identify the generated intermediates. Eventually, an artificial neural network (ANN) was applied to predict the AB92 removal efficiency based upon the experimental data with a proper correlation coefficient (R²=0.9836).

Kinetic modeling of sonocatalytic degradation of reactive orange 29 in the presence of lanthanide-doped ZnO nanoparticles

The sonocatalytic degradation of reactive orange 29 (RO29) was examined from the reaction kinetics point of view. Sonochemically synthesized lanthanides (Ho³⁺ and Er³⁺)-doped ZnO nanoparticles were utilized as catalyst during the sonocatalytic process. The prepared nanoparticles were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The aqueous RO29 solution was irradiated with a 36kHz ultrasonic bath (150W) for investigation of the degradation kinetics by varying of the initial dye concentration (10-30mg/L) and catalyst dosage (0.25-1g/L). A novel kinetic model was developed and validated for prediction of the RO29 sonocatalytic degradation efficiency using generally accepted intrinsic elementary reactions. The proposed kinetic model clearly demonstrates the dependence of the apparent first-order rate constant on the mentioned operational parameters. The predicted values of degradation efficiency and experimental results were in good agreement with appropriate correlation coefficient (R²>0.945).

Sonocatalytic removal of naproxen by synthesized zinc oxide nanoparticles on montmorillonite

ZnO/MMT nanocomposite as sonocatalyst was prepared by immobilizing synthesized ZnO on the montmorillonite surface. The characteristics of as-prepared nanocomposite were studied by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD) techniques. The synthesized samples were used as a catalyst for sonocatalytic degradation of naproxen. ZnO/MMT catalyst in the presence of ultrasound irradiation was more effective compared to pure ZnO nanoparticles and MMT particles in the sonocatalysis of naproxen. The effect of different operational parameters on the sonocatalytic degradation of naproxen including initial drug concentration, sonocatalyst dosage, solution pH, ultrasonic power and the presence of organic and inorganic scavengers were evaluated. It was found that the presence of the scavengers suppressed the sonocatalytic degradation efficiency. The reusability of the nanocomposite was examined in several consecutive runs, and the degradation efficiency decreased only 2% after 5 repeated runs. The main intermediates of naproxen degradation were determined by gas chromatography-mass spectrometry (GC-Mass).