Sonoluminescence and dynamics of cavitation bubble populations in sulfuric acid

Observation of cavitation dynamics in viscous deep eutectic solvents during power ultrasound sonication

Deep eutectic solvents (DESs) are a class of ionic liquid with emerging applications in ionometallurgy. The characteristic high viscosity of DESs, however, limit mass transport and result in slow dissolution kinetics. Through targeted application of high-power ultrasound, ionometallurgical processing time can be significantly accelerated. This acceleration is primarily mediated by the cavitation generated in the liquid surrounding the ultrasound source. In this work, we characterise the development of cavitation structure in three DESs of increasing viscosity, and water, via high-speed imaging and parallel acoustic detection. The intensity of the cavitation is characterised in each liquid as a function of input power of a commercially available ultrasonic horn across more than twenty input powers, by monitoring the bubble collapse shockwaves generated by intense, inertially collapsing bubbles. Through analysis of the acoustic emissions and bubble structure dynamics in each liquid, optimal driving powers are identified where cavitation is most effective. In each of the DESs, driving the ultrasonic horn at lower input powers (25%) was associated with greater cavitation performance than at double the driving power (50%).

Jetting bubbles observed by x-ray holography at a free-electron laser: internal structure and the effect of non-axisymmetric boundary conditions

In this work, we study the jetting dynamics of individual cavitation bubbles using x-ray holographic imaging and high-speed optical shadowgraphy. The bubbles are induced by a focused infrared laser pulse in water near the surface of a flat, circular glass plate, and later probed with ultrashort x-ray pulses produced by an x-ray free-electron laser (XFEL). The holographic imaging can reveal essential information of the bubble interior that would otherwise not be accessible in the optical regime due to obscuration or diffraction. The influence of asymmetric boundary conditions on the jet's characteristics is analysed for cases where the axial symmetry is perturbed and curved liquid filaments can form inside the cavity. The x-ray images demonstrate that when oblique jets impact the rigid boundary, they produce a non-axisymmetric splash which grows from a moving stagnation point. Additionally, the images reveal the formation of complex gas/liquid structures inside the jetting bubbles that are invisible to standard optical microscopy. The experimental results are analysed with the assistance of full three-dimensional numerical simulations of the Navier-Stokes equations in their compressible formulation, which allow a deeper understanding of the distinctive features observed in the x-ray holographic images. In particular, the effects of varying the dimensionless stand-off distances measured from the initial bubble location to the surface of the solid plate and also to its nearest edge are addressed using both experiments and simulations. A relation between the jet tilting angle and the dimensionless bubble position asymmetry is derived. The present study provides new insights into bubble jetting and demonstrates the potential of x-ray holography for future investigations in this field.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00348-023-03759-9.

A mechanistic study identifying improved technology critical metal delamination from printed circuit boards at lower power sonications in a deep eutectic solvent

Deep eutectic solvents (DESs) are an emerging class of ionic liquids that offer a solution to reclaiming technology critical metals (TCMs) from electronic waste, with potential for improved life cycle analysis. The high viscosities typical of DESs, however, impose mass transport limitations such that passive TCM removal generally requires immersion over extended durations, in some cases in the order of hours. It is postulated that, through the targeted application of power ultrasound, delamination of key structures in electronic components immersed in DESs can be significantly accelerated, thereby enabling rapid recovery of TCMs. In this paper, we fully characterise cavitation in a Choline Chloride-Ethylene Glycol DES as a function of sonotrode input power, by the acoustic detection of the bubble collapse shockwave content generated during sonications at more than 20 input powers over the available range. This justifies the selection of two powers for a detailed study of ultrasonically enhanced TCM-delamination from printed circuit boards (PCBs). Dual-perspective high-speed imaging is employed, which facilitates simultaneous observation of TCM removal, and the cavitation evolution and interaction with the PCB surface. Bubble jetting is identified as a key contributor to initial pitting of the TCM layers, exposing the larger underlying copper layer, with the contributions of additional inertial cavitation-mediated phenomena such as bubble-collapse shockwaves also demonstrated as important for delamination. Optimal cavitation activity throughout the sonication then promotes etching of the copper base layer of the PCB structure targeted by the DES, liberating the overlaying TCMs in sections as large as 0.79 mm2. We report a thirtyfold improvement in processing time compared to passive delamination, with sonications at the lower power outperforming those at the higher power. The results demonstrate the potential for industrially scalable recovery of TCMs from the growing quantities of global e-waste, using combined power ultrasonics and DESs.

Advances on sonophotocatalysis as a water and wastewater treatment technique: efficiency, challenges and process optimisation

Due to water shortage and increased water pollution, various methods are being explored to improve water quality by treating contaminants. Sonophotocatalysis is a combination of two individual water treatment processes i.e., photocatalysis and sonocatalysis. With advantages including shorter reaction times and enhanced activity, this technique shows possible futuristic applications as an efficient water treatment technology. Herein, background insight on sonophotocalysis as a water and wastewater treatment technique as well as the general mechanism of activity is explained. The commonly used catalysts for sonophotocatalytic applications as well as their synthesis pathways are also briefly discussed. Additionally, the utilisation of sonophotocatalysis for the disinfection of various microbial species as well as treatment of wastewater pollutants including organic (dyes, pharmaceuticals and pesticides) and inorganic species (heavy metals) is deliberated. This review also gives a critical analysis of the efficiency, enhancement strategies as well as challenges and outlooks in this field. It is thus intended to give insight to researchers in the context of facilitating future developments in the field of water treatment, and advancing sonophotocatalysis towards large-scale implementation and commercialization.

Sonoluminescence Spectra in the First Tens of Seconds of Sonolysis of [BEPip][NTf2], at 20 kHz under Ar

Following recent works on the sonochemical degradation of butyl ethyl piperidinium bis-(trifluoromethylsulfonyl)imide ([BEPip][NTf₂]), monitoring of sonoluminescence (SL) spectra in the first tens of seconds of sonolysis was needed to better characterize the formed plasma and to question the correlation of the SL spectra with the viscosity. A very dry [BEPip][NTf₂] ionic liquid (IL) and a water-saturated liquid are studied in this paper. In both cases, IL degradation is observed as soon as SL emission appears. It is confirmed that the initial evolution of the SL intensity is closely linked to the liquid viscosity that impacts the number of bubbles; however, other parameters can also play a role, such as the presence of water. The water-saturated IL shows more intense SL and faster degradation. In addition to the expected bands, new emission bands are detected and attributed to the S₂ B-X emission, which is favored in the water-saturated ionic liquid.

A Review on Production and Surface Modifications of Biochar Materials via Biomass Pyrolysis Process for Supercapacitor Applications

Biochar (BC) based materials are solid carbon enriched materials produced via different thermochemical techniques such as pyrolysis. However, the non-modified/non-activated BC-based materials obtained from the low-temperature pyrolysis of biomass cannot perform well in energy storage applications due to the mismatched physicochemical and electrical properties such as low surface area, poor pore features, and low density and conductivity. Therefore, to improve the surface features and structure of the BC and surface functionalities, surface modifications and activations are introduced to improve its properties to achieve enhanced electrochemical performance. The surface modifications use various activation methods to modify the surface properties of BC to achieve enhanced performance for supercapacitors in energy storage applications. This article provides a detailed review of surface modification methods and the application of modified BC to be used for the synthesis of electrodes for supercapacitors. The effect of those activation methods on physicochemical and electrical properties is critically presented. Finally, the research gap and future prospects are also elucidated.

Modeling the Voltage Produced by Ultrasound in Seawater by Stochastic and Artificial Intelligence Methods

Experiments have proved that an electrical signal appears in the ultrasonic cavitation field; its properties are influenced by the ultrasound frequency, the liquid type, and liquid characteristics such as density, viscosity, and surface tension. Still, the features of the signals are not entirely known. Therefore, we present the results on modeling the voltage collected in seawater, in ultrasound cavitation produced by a 20 kHz frequency generator, working at 80 W. Comparisons of the Box–Jenkins approaches, with artificial intelligence methods (GRNN) and hybrid (Wavelet-ARIMA and Wavelet-ANN) are provided, using different goodness of fit indicators. It is shown that the last approach gave the best model.

Acoustic characterization of cavitation intensity: A review

Cavitation intensity is used to describe the activity of cavitation, and several methods are developed to identify the intensity of cavitation. This work aimed to provide an overview and discussion of the several existing characterization methods for cavitation intensity, three acoustic approaches for charactering cavitation were discussed in detail. It was showed that cavitation noise spectrum is too complex and there are some differences and disputes on the characterization of cavitation intensity by cavitation noise. In this review, we recommended a total cavitation noise intensity estimated via the integration of real cavitation noise spectrum over full frequency domain instead of artificially adding inaccurate filtering processing.

Power density modulated ultrasonic degradation of perfluoroalkyl substances with and without sparging Argon

The power density modulates the dynamics of the chemical reactions during the ultrasonic breakdown of organic compounds. We evaluated the ultrasonic degradation of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) at various power densities (30 W/L-262 W/L) with and without sparging Argon. We observed pseudo-first-order degradation kinetics at an initial PFASs concentration of 100 nM over a range of power density. The rate kinetics of degradation shows a non-linear increase with an increase in power density. We proposed a four-parameter logistic regression (4PLR) equation that empirically fits the degradation rate kinetics with the power density. The 4PLR equation predicts that the maximum achievable half-life of PFOA and PFOS sonochemical degradation are 1 and 10 min under a given set of experimental conditions. The high bulk-water temperature (i.e., 30 °C) of the aqueous sample helps increase the degradation rate of PFOA and PFOS. The addition of oxidants such as iodate and chlorate help enhance PFOA degradation in an argon environment at an ultrasonic frequency of 575 kHz.

The role of the bubble-bubble interaction on radial pulsations of bubbles

Using a model that with or without considering the interaction between bubbles through the radiated pressure waves, numerical simulations of cavitation bubbles have been performed in order to study the effect of the bubble-bubble interaction on radial pulsations of bubbles. Comparing the results obtained by with or without considering the bubble-bubble interaction, it is suggested that the suppression or enlargement property of expansion ratios of bubbles due to the bubble-bubble interaction largely depends on the ultrasound parameters, the ambient bubble radii, the distances between bubbles and the number of bubbles (in multi-bubble environment, the last two aspects can be expressed using the coupling strength). The frequency response curve of expansion ratio decreases and shifts to left due to the bubble-bubble interaction and the larger the coupling strength is, the more the left-shifting is.

Thermodynamic effect of single bubble near a rigid wall

The objective of this paper is to numerically investigate the thermodynamic effect during bubble collapse near a rigid boundary. A compressible fluid model is introduced to accurately capture the transient process of bubble shapes and temperature, as well as corresponding pressure, and velocity. The accuracy of the numerical model is verified by the experimental data of bubble shapes, and Keller-Kolodner equation as well as its thermodynamic equation. The results show that a bubble near the rigid boundary presents high-speed jet in collapse stage and counter jet in rebound stage, respectively. In the collapse stage, the bubble margin will shrink rapidly and do the positive work on the compressible vapor inside the bubble, then a significant amount of heat will be generated, and finally the generation of high-speed jet drives the low-temperature liquid outside the bubble to occupy the position of high-temperature vapor inside the bubble. In the rebound stage, the counter jet moving away from the rigid boundary takes part of heat away from the sub-bubble, which avoids the external work of the expansion of the sub-bubble and the temperature reduction caused by the dissipation effect of the vortex structure. In addition, the initial standoff has a significant effect on the thermodynamics of bubble oscillation. The temperature keeps increasing with the increase of the initial standoff in the collapse stage, while it shows a downward trend with the increase of the initial standoff in the rebound stage. That's because the high-speed jet and counter jet of bubble gradually disappear when the initial standoff increases, which is the important reason for the opposite evolution trend of temperature in collapse and rebound stage.

Application of ultrasonic technology in postharvested fruits and vegetables storage: A review

It has been an important research topic and a serious applicable issue to extend storage time of fruits and vegetables using advanced scientific and effective technology. Among various approaches, ultrasound has been regarded as one of the most pollution-free and effective technical means to significantly improve the preservation of fruits and vegetables. This paper summarizes the application of ultrasonic technology in fruits and vegetables storage in recent years, including removal of pesticide residues and cleaning, sterilization, enzyme inactivation, effect on physico-chemical indexes. Additionally, we also discussed limitations and negative effects of ultrasonic treatment on fruits and vegetables such as damages to tissues and cells. Furthermore, a proper application of ultrasonic technology has been proven to effectively extend the storage period of postharvest fruits and vegetables and maintain the quality. Moreover, the combination of ultrasound and other conventional preservation technologies can further improve the preservation in a coordinate manner and even have a broader application prospect.

Eigenfrequency characterization and tuning of Ti-6Al-4V ultrasonic horn at high temperatures for glass molding

Glass molding assisted by ultrasonic vibration is a promising yet challenging technique for microoptics fabrication. During glass molding localized high temperatures (300-600 °C) often result in transformed eigenfrequencies of the ultrasonic horn, and hence decreased electroacoustic efficiencies of the ultrasonic system. This study proposes a systematic methodology to optimally tune the objective eigenfrequency of the horn at elevated temperatures. Theoretical and numerical analyses are first performed to characterize the thermally disturbed modal characteristics of the horn. Numerical results indicate that the longitudinal eigenfrequency of the horn decreases significantly with the increasing molding temperature T_m. To compensate for this eigenfrequency decrease, numerical size optimization is then conducted and a two-segment cylindrical horn with an optimized tool (68.62 mm in length) is obtained. In situ eigenfrequency measurements of the optimized horn are further implemented at varying molding temperatures. Experimental results suggest that the tuned eigenfrequencies of the optimized Ti-6Al-4V horn are within the prescribed frequency-tracking range (35 ± 0.5 kHz) over a wide range of molding temperatures (226-641 °C). Thus, by merely pre-adjusting the theoretical eigenlength of the horn, a well-tuned and adaptable high-temperature ultrasonic vibration system can be effectively developed. In addition to glass molding, the proposed methodology applies to design and optimization of ultrasonic horns for diverse thermally involved processes.

Effect of NaCl salt on sonochemistry and sonoluminescence in aqueous solutions

The presence of salts in a solution is known to affect sonochemistry, but until now no consensus has been reached in the literature on how and why a salt influences sonochemistry. The present study focuses on the effect of NaCl on sonochemical activity and sonoluminescence at 362-kHz frequency in aqueous solutions saturated with He and Ar. It is shown that the presence of salt has a multiple impact: the global population of active bubbles decreases due to the decreasing gas solubility, new chemical reactions involving Na and Cl atoms occur that influence hydrogen and hydrogen peroxide yields and the standing wave component of the US wave is enhanced, favoring sonoluminescence emission. Interestingly, the effect of salt greatly depends on the nature of the saturating gas: for instance, strong acidification occurs under He, while it is limited under Ar.

Mechanochemistry in Translation

As the influence of translation rates on protein folding and function has come to light, the mechanisms by which translation speed is modulated have become an important issue. One mechanism entails the generation of force by the nascent protein. Cotranslational processes, such as nascent protein folding, the emergence of unfolded nascent chain segments from the ribosome's exit tunnel, and insertion of the nascent chain into or translocation of the nascent chain through membranes, can generate forces that are transmitted back to the peptidyl transferase center and affect translation rates. In this Perspective, we examine the processes that generate these forces, the mechanisms of transmission along the ribosomal exit tunnel to the peptidyl transferase center, and the effects of force on the ribosome's catalytic cycle. We also discuss the physical models that have been developed to predict and explain force generation for individual processes and speculate about other processes that may generate forces that have yet to be tested.

The Chemical History of a Bubble

Acoustic cavitation (the growth, oscillation, and rapid collapse of bubbles in a liquid) occurs in all liquids irradiated with sufficient intensity of sound or ultrasound. The collapse of such bubbles creates local heating and provides a unique source of energy for driving chemical reactions. In addition to sonochemical bond scission and formation, cavitation also induces light emission in many liquids. This phenomenon of sonoluminescence (SL) has captured the imagination of many researchers since it was first observed 85 years ago. SL provides a direct probe of cavitation events and has provided most of our understanding of the conditions created inside collapsing bubbles. Spectroscopic analyses of SL from single acoustically levitated bubbles as well as from clouds of bubbles have revealed molecular, atomic, and ionic line and band emission riding atop an underlying continuum arising from radiative plasma processes. Application of spectrometric methods of pyrometry and plasma diagnostics to these spectra has permitted quantitative measurement of the intracavity conditions: relative peak intensities for temperature measurements, peak shifts and broadening for pressures, and peak asymmetries for plasma electron densities. The studies discussed herein have revealed that extraordinary conditions are generated inside the collapsing bubbles in ordinary room-temperature liquids: observable temperatures exceeding 15 000 K (i.e., three times the surface temperature of our sun), pressures of well over 1000 bar (more than the pressure at the bottom of the Mariana Trench), and heating and cooling rates in excess of 10¹² K·s^-1. Scientists from many disciplines, and even nonscientists, have been and continue to be intrigued by the consequences of dynamic bubbles in liquids. As chemists, we are fascinated by the high energy reactions and processes that occur during acoustic cavitation and by the use of SL as a spectroscopic probe of the events during cavitation. Within the chemical realm of SL and cavitation there are many interesting questions that are now answered but also many that remain to be explored, so we hope that this Account reveals to the reader some of the most fascinating of those curiosities as we explore the chemical history of a bubble. The high energy species produced inside collapsing bubbles also lead to secondary reactions from the high energy species created within the collapsing bubble diffusing into the bulk liquid and expanding the range of sonochemical reactions observed, especially in redox reactions relevant to nanomaterials synthesis. Bubbles near solid surfaces deform upon collapse, which lessens the internal heating within the bubble, as shown by SL studies, but introduces important mechanical consequences in terms of surface damage and increased surface reactivity. Our understanding of the conditions created during cavitation has informed the applications of ultrasound to a wide range of chemical applications, from nanomaterials to synthetically useful organic reactions to biomedical and pharmaceutical uses. Indeed, we echo Michael Faraday's observation concerning a candle flame, "There is not a law under which any part of this universe is governed which does not come into play and is touched upon in these phenomena." ( Faraday , M. The Chemical History of a Candle ; Harper & Brothers : New York , 1861 ).

Inverse effects of the gas feed positioning on sonochemistry and sonoluminescence

Purging of solutions to enhance sonochemical reactions is a common practice. A fundamental study combining sonoluminescence spectroscopy and sonochemical activity is adopted to study the effects of continuous Ar gas flow in the solution and of the position of the gas inlet tube on high-frequency sonolysis of aqueous solutions. It has been observed that neither sonochemical activity nor sonoluminescence intensity is controlled by the gas solubility only. Besides, the change in position of the gas inlet tube leads to opposite effects in sonoluminescence intensity and sonochemical activity: while the former increases, the latter decreases. Such an observation has never been reported despite sonochemical reactions have been carried out under different gas environments. Sonoluminescence spectroscopy indicates that more extreme conditions are reached at collapse with the gas inlet on the side, which could be explained by a more symmetrical collapse. Finally, it is shown in certain conditions that it is possible to favor the formation of some sonochemical products simply by positioning the gas inlet at different positions, which has practical significance in designing large scale sonochemical reactors for industrial applications.

A novel Z-scheme sonocatalyst system, Er3+:Y3Al5O12@Ni(Fe0.05Ga0.95)2O4-Au-BiVO4, and application in sonocatalytic degradation of sulfanilamide

A novel Z-scheme coated composite, Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, was designed for sonocatalytic degradation of sulfanilamide and fabricated by sol-hydrothermal and calcination methods. The prepared sample was characterized by X-ray diffractometer (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), UV-vis diffuse reflectance spectra (DRS), fourier transform infrared (FT-IR) spectra, Raman spectra and photoluminescence (PL) spectra. In Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, Ni(Fe_0.05Ga_0.95)₂O₄ and BiVO₄ form a Z-scheme sonocatalytic system, Er³⁺:Y₃Al₅O₁₂ as an up-conversion luminescence agent (from visible-light to ultraviolet-light) provides the ultraviolet-light for satisfying the energy demand of wide band-gap Ni(Fe_0.05Ga_0.95)₂O₄ and Au nanoparticles as co-catalyst forms more active sites to enrich electrons. Also, Au nanoparticles as conductive channels promotes the electrons (e^-) from conduction band of BiVO₄ to transfer to valence band of Ni(Fe_0.05Ga_0.95)₂O₄. Due to the characteristics of valence state diversity, the Fe³⁺ and V⁵⁺ constitute a redox reaction recombination system, which can also push electrons (e^-) on conduction band of BiVO₄ to quickly transfer to valence band of Ni(Fe_0.05Ga_0.95)₂O₄. The sonocatalytic activity of Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄ nanocomposite was detected through degradation of sulfanilamide under ultrasonic irradiation. A high sonocatalytic degradation ratio (95.64%) of sulfanilamide can be obtained when the conditions of 10.00 mg/L sulfanilamide, 1.00 g/L Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄, 300 min ultrasonic irradiation and 100 mL total volume were adopted. Some factors such as ultrasonic irradiation time and cycle number on the sonocatalytic degradation efficiency are also investigated by using TOC and UV-vis spectroscopy. Subsequently, the effects of hydroxyl radicals (OH) and hole scavengers were investigated to elaborate the mechanism. The researches show that the prepared Z-scheme Er³⁺:Y₃Al₅O₁₂@Ni(Fe_0.05Ga_0.95)₂O₄-Au-BiVO₄ coated composite displayed an excellent sonocatalytic activity in degradation of sulfanilamide under ultrasonic irradiation.

Water-molecular emission from cavitation bubbles affected by electric fields

Orange emission was observed during multibubble sonoluminescence at 1 MHz in water saturated with noble gas. The emission arose in the vicinity of the peeled ground electrode of a piezoceramic transducer exposed to water, suggesting that cavitation bubbles were affected by the electric fields that leaked from the transducer. The spectrum of the emission exhibited a broad component whose intensity increased towards the near-infrared region with peaks at 713 and 813 nm. The spectral shape was independent of the saturation gas of He, Ne, or Kr. The broad component was attributed to the superposition of lines due to vibration-rotation transitions of water molecules, each of which was broadened by the high pressure and electric fields at bubble collapse. An emission mechanism based on charge induction by electric fields and the charged droplet model is proposed.

Pressure and tension waves from bubble collapse near a solid boundary: A numerical approach

The acoustic waves being generated during the motion of a bubble in water near a solid boundary are calculated numerically. The open source package OpenFOAM is used for solving the Navier-Stokes equation and extended to include nonlinear acoustic wave effects via the Tait equation for water. A bubble model with a small amount of gas is chosen, the gas obeying an adiabatic law. A bubble starting from a small size with high internal pressure near a flat, solid boundary is studied. The sequence of events from bubble growth via axial microjet formation, jet impact, annular nanojet formation, torus-bubble collapse, and bubble rebound to second collapse is described. The different pressure and tension waves with their propagation properties are demonstrated.

Simultaneous High-Speed Recording of Sonoluminescence and Bubble Dynamics in Multibubble Fields

Multibubble sonoluminescence (MBSL) is the emission of light from imploding cavitation bubbles in dense ensembles or clouds. We demonstrate a technique of high-speed recording that allows imaging of bubble oscillations and motion together with emitted light flashes in a nonstationary multibubble environment. Hereby a definite experimental identification of light emitting individual bubbles, as well as details of their collapse dynamics can be obtained. For the extremely bright MBSL of acoustic cavitation in xenon saturated phosphoric acid, we are able to explore effects of bubble translation, deformation, and interaction on MBSL activity. The recordings with up to 0.5 million frames per second show that few and only the largest bubbles in the fields are flashing brightly, and that emission often occurs repetitively. Bubble collisions can lead to coalescence and the start or intensification of the emission, but also to its termination via instabilities and splitting. Bubbles that develop a liquid jet during collapse can flash intensely, but stronger jetting gradually reduces the emissions. Estimates of MBSL collapse temperature peaks are possible by numerical fits of transient bubble dynamics, in one case yielding 38 000 K.

Visualization and optimization of cavitation activity at a solid surface in high frequency ultrasound fields

Despite the increasing use of high frequency ultrasound in heterogeneous reactions, knowledge about the spatial distribution of cavitation bubbles at the irradiated solid surface is still lacking. This gap hinders controllable surface sonoreactions. Here we present an optimization study of the cavitation bubble distribution at a solid sample using sonoluminescence and sonochemiluminescence imaging. The experiments were performed at three ultrasound frequencies, namely 580, 860 and 1142kHz. We found that position and orientation of the sample to the transducer, as well as its material properties influence the distribution of active cavitation bubbles at the sample surface in the reactor. The reason is a significant modification of the acoustic field due to reflections and absorption of the ultrasonic wave by the solid. This is retraced by numerical simulations employing the Finite Element Method, yielding reasonable agreement of luminescent zones and high acoustic pressure amplitudes in 2D simulations. A homogeneous coverage of the test sample surface with cavitation is finally reached at nearly vertical inclination with respect to the incident wave.