Ultrasonic-assisted deacetylation of cellulose acetate nanofibers: A rapid method to produce cellulose nanofibers

Separation of oil-water emulsion by cellulose acetate ultrafiltration membranes

This study reports the separation of oil from water using cellulose acetate (CA) ultrafiltration (UF) membranes. The CA membranes were fabricated by varying bath temperatures such as 5 ± 2°C, 25 ± 2°C and 45 ± 2°C using the phase inversion technique and assess their performance based on the oil removal efficiency. Changing the coagulation bath temperature (CBT) at that stage of membrane formations affects the porosity, pore size, hydraulic resistance, morphological structure and performance of membranes. The obtained results revealed increased porosity and pore size and also decreased hydraulic resistance of the membranes as the CBT increases. Field Emission Scanning Electron Microscopy (FESEM) images indicate that a large number of surface pores are visibly found at the higher bath temperature. Atomic force Microscopy (AFM) images show increased average roughness (Ra) of the membrane as the CBT of the membrane increases. The water flux and permeate flux of all the membranes tend to increase with an increase in CBT. From Chemical Oxygen Demand (COD) studies, the oil removal efficiency was maximum for the lower bath temperature membrane. The results indicate that conditions of the coagulation bath significantly affect the porous structure, morphology and performance of the membrane.

Overlooked Promising Green Features of Electrospun Cellulose-Based Fibers in Lithium-Ion Batteries

Lithium-ion batteries (LIBs) are accounted as promising power tools, applicable in a wide range of energy-based equipment, from portable devices to electric vehicles. Meanwhile, approaching a cost-effective, environmentally friendly, and safe LIB array has remained sluggish yet. In this regard, cellulose, as a nontoxic natural renewable polymer, has provided a stable and cohesive electrode structure with excellent mechanical stability and reduced electrode cracking or delamination during cycling. Additionally, the porous configuration of the cellulose allows for efficient and faster ion transport as a separator component. Miniaturizing cellulose and its derivatives have revealed more fabulous characteristics for the anode, cathode, and separator resulting from the increased surface-to-volume ratio and superior porosity, as well as their thin and lightweight architectures. The focal point of this review outlines the challenges relating to the extraction and electrospinning of cellulose-based nanofibers. Additionally, the efforts to employ these membranes as the LIBs' components are elucidated. Correspondingly, despite the great performance of cellulose-based LIB structures, a research gap is sensed in this era, possibly due to the difficulties in processing the electrospun cellulose fibers. Hence, this review can provide a source of recent advancements and innovations in cellulose-based electrospun LIBs for researchers who aim to develop versatile battery structures using green materials, worthwhile, and eco-friendly processing techniques.

Solution blow co-spinning of cellulose acetate with poly(ethylene oxide). Structure, morphology, and properties of nanofibers

Cellulose acetate (CA) nanofibers are prepared using solution blow co-spinning (SBS) with poly(ethylene oxide) (PEO). The pure CA membranes are obtained by washing water-soluble PEO from the fibrous CA-PEO blend. Nanofibrous membranes are characterized using optical and scanning electron microscopy (SEM), differential scanning calorimetry (DSC), infrared spectroscopy (ATR-FTIR), and surface zeta potential measurements. Thermal transitions from DSC and ATR-FTIR spectra analysis were used to confirm the removal of the PEO. Although the characteristic signals of PEO are not observed by FTIR, an additional thermal step transition in CA nanofibers indicates the embedding of a small amount of PEO (up to 6 wt%). SEM analysis shows that CA-PEO blends are constituted by fibers with mean diameters from 671 to 857 nm (depending on the SBS parameters), while after PEO removal, diameters range from 567 to 605 nm. We propose a new method for staining CA-PEO membranes with iodine solution in absolute ethanol that allows the differentiation of CA and PEO components with an optical microscope. The microscopy results suggest that PEO assists in the spinning by enveloping CA nanofibers, allowing uninterrupted processing. The successful deacetylation to cellulose using an aqueous KOH solution is confirmed with zeta potential measurements and ATR-FTIR.

Modified Electrospun Membranes Using Different Nanomaterials for Membrane Distillation

Obtaining fresh drinking water is a challenge directly related to the change in agricultural, industrial, and societal demands and pressure. Therefore, the sustainable treatment of saline water to get clean water is a major requirement for human survival. In this review, we have detailed the use of electrospun nanofiber-based membranes (ENMs) for water reclamation improvements with respect to physical and chemical modifications. Although membrane distillation (MD) has been considered a low-cost water reclamation process, especially with the availability of low-grade waste heat sources, significant improvements are still required in terms of preparing efficient membranes with enhanced water flux, anti-fouling, and anti-scaling characteristics. In particular, different types of nanomaterials have been explored as guest molecules for electrospinning with different polymers. Nanomaterials such as metallic organic frameworks (MOFs), zeolites, dioxides, carbon nanotubes (CNTs), etc., have opened unprecedented perspectives for the implementation of the MD process. The integration of nanofillers gives appropriate characteristics to the MD membranes by changing their chemical and physical properties, which significantly enhances energy efficiency without impacting the economic costs. Here, we provide a comprehensive overview of the state-of-the-art status, the opportunities, open challenges, and pitfalls of the emerging field of modified ENMs using different nanomaterials for desalination applications.

Enhanced cellulose nanofiber mechanical stability through ionic crosslinking and interpretation of adsorption data using machine learning

Herein we report the fabrication of cationic functionalized cellulose nanofibers (c-CNF) having 0.13 mmol.g^-1 ammonium content and its ionic crosslinking via the pad-batch process. The overall chemical modifications were justified through infrared spectroscopy. It is revealed that the tensile strength of ionic crosslinked c-CNF (z_c-CNF) improved from 3.8 MPa to 5.4 MPa over c-CNF. The adsorption capacity of z_c--CNF was found to be 158 mg.g^-1 followed by the Thomas model. Further, the experimental data were used to train and test a series of machine learning (ML) models. A total of 23 various classical ML models (as a benchmark) were compared simultaneously using Pycaret which helped reduce the programming complexity. However, shallow, and deep neural networks are used that outperformed the classic machine learning models. The best classical-tuned ML model using Random Forests regression had an accuracy of 92.6 %. The deep neural network made effective by early stopping and dropout regularization techniques, with 20 × 6 (Neurons x Layers) configuration, showed an appreciable prediction accuracy of 96 %.

Antibacterial and Antiviral Effects of Ag, Cu and Zn Metals, Respective Nanoparticles and Filter Materials Thereof against Coronavirus SARS-CoV-2 and Influenza A Virus

Due to the high prevalence of infectious diseases and their concurrent outbreaks, there is a high interest in developing novel materials with antimicrobial properties. Antibacterial and antiviral properties of a range of metal-based nanoparticles (NPs) are a promising means to fight airborne diseases caused by viruses and bacteria. The aim of this study was to test antimicrobial metals and metal-based nanoparticles efficacy against three viruses, namely influenza A virus (H1N1; A/WSN/1933) and coronaviruses TGEV and SARS-CoV-2; and two bacteria, Escherichia coli and Staphylococcus aureus. The efficacy of ZnO, CuO, and Ag NPs and their respective metal salts, i.e., ZnSO₄, CuSO₄, and AgNO₃, was evaluated in suspensions, and the compounds with the highest antiviral efficacy were chosen for incorporation into fibers of cellulose acetate (CA), using electrospinning to produce filter materials for face masks. Among the tested compounds, CuSO₄ demonstrated the highest efficacy against influenza A virus and SARS-CoV-2 (1 h IC50 1.395 mg/L and 0.45 mg/L, respectively), followed by Zn salt and Ag salt. Therefore, Cu compounds were selected for incorporation into CA fibers to produce antiviral and antibacterial filter materials for face masks. CA fibers comprising CuSO₄ decreased SARS-CoV-2 titer by 0.38 logarithms and influenza A virus titer by 1.08 logarithms after 5 min of contact; after 1 h of contact, SARS-COV-2 virus was completely inactivated. Developed CuO- and CuSO₄-based filter materials also efficiently inactivated the bacteria Escherichia coli and Staphylococcus aureus. The metal NPs and respective metal salts were potent antibacterial and antiviral compounds that were successfully incorporated into the filter materials of face masks. New antibacterial and antiviral materials developed and characterized in this study are crucial in the context of the ongoing SARS-CoV-2 pandemic and beyond.

Preparation and Evaluation of Undaria pinnatifida Nanocellulose in Fabricating Pickering Emulsions for Protection of Astaxanthin

Pickering emulsions stabilized from natural sources are often used to load unstable bio-active ingredients, such as astaxanthin (AXT), to improve their functionality. In this study, AXT-loaded Pickering emulsions were successfully prepared by 2,2,6,6-tetramethy-1-piperidine oxide (TEMPO)-oxidized cellulose nanofibers (TOCNFs) from Undaria pinnatifida. The morphology analysis showed that TOCNFs had a high aspect ratio and dispersibility, which could effectively prevent the aggregation of oil droplets. The stable emulsion was obtained after exploring the influence of different factors (ultrasonic intensity, TOCNFs concentration, pH, and ionic strength). As expected, AXT-loaded Pickering emulsions showed good stability at 50 °C and 14 days of storage. The results of simulated in vitro digestion showed that the emulsions exhibited higher release of free fatty acids (FFAs) and bioaccessibility of AXT than those in sunflower oil. Hence, our work brought new insights into the preparation of Pickering emulsions and their applications in protection and sustained, controlled release of AXT.

Fabrication of Ceftriaxone-Loaded Cellulose Acetate and Polyvinyl Alcohol Nanofibers and Their Antibacterial Evaluation

Nanotechnology provides solutions by combining the fields of textiles and medicine to prevent infectious microbial spread. Our study aimed to evaluate the antimicrobial activity of nanofiber sheets incorporated with a well-known antibiotic, ceftriaxone. It is a third-generation antibiotic that belongs to the cephalosporin group. Different percentages (0, 5%, 10%, 15%, and 20%; based on polymer wt%) of ceftriaxone were incorporated with a polymer such as polyvinyl alcohol (PVA) via electrospinning to fabricate nanofiber sheets. The Kirby-Bauer method was used to evaluate the antimicrobial susceptibility of the nanofiber sheets using Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). For the characterization of the nanofiber sheets incorporated with the drug, several techniques were used, such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Our results showed that the nanofiber sheets containing ceftriaxone had potential inhibitory activity against E. coli and S. aureus as they had inhibition zones of approximately 20–25 mm on Mueller-Hinton-agar-containing plates. In conclusion, our nanofiber sheets fabricated with ceftriaxone have potential inhibitory effects against bacteria and can be used as a dressing to treat wounds in hospitals and for other biomedical applications.

Rational design of Janus nanofibrous membranes with novel under-oil superhydrophilic/superhydrophobic asymmetric wettability for water-in-diesel emulsion separation

Endowing nanofibrous membranes with special wettability has always been the dominant strategy to improve the separation performance for water-in-oil emulsions. In this work, a rational design of deacetylated cellulose acetate/polyvinylidene fluoride (dCA/PVDF) Janus nanofibrous membrane, with asymmetric wettability in either air, water or diesel environment, was developed via sequential electrospinning PVDF and CA membranes followed by alkali treatment. In the process of water-in-diesel emulsion separation, the under-diesel superhydrophilic dCA layer is able to capture the emulsified water and strengthens the demulsification ability of the Janus membrane, while the under-diesel superhydrophobic PVDF layer acts as a water barrier and further improves the separation ability. The Janus membrane therefore exhibited prominent separation performance not only for the water/diesel mixture (separation efficiency 99.98%) but also for the surfactant-stabilized water-in-diesel emulsion with l vol% water (separation efficiency 97.74%). Moreover, the Janus membrane maintained high separation efficiency over 96% after repeated use for 50 times or soaking in corrosive solutions for 24 h. The Janus dCA/PVDF nanofibrous membrane possesses competitive efficiency, reusability and acid/alkali resistance, making it a promising candidate as the separation membrane for the surfactant-stabilized water-in-diesel emulsion.

Nanofiber Systems as Herbal Bioactive Compounds Carriers: Current Applications in Healthcare

Nanofibers have emerged as a potential novel platform due to their physicochemical properties for healthcare applications. Nanofibers’ advantages rely on their high specific surface-area-to-volume and highly porous mesh. Their peculiar assembly allows cell accommodation, nutrient infiltration, gas exchange, waste excretion, high drug release rate, and stable structure. This review provided comprehensive information on the design and development of natural-based polymer nanofibers with the incorporation of herbal medicines for the treatment of common diseases and their in vivo studies. Natural and synthetic polymers have been widely used for the fabrication of nanofibers capable of mimicking extracellular matrix structure. Among them, natural polymers are preferred because of their biocompatibility, biodegradability, and similarity with extracellular matrix proteins. Herbal bioactive compounds from natural extracts have raised special interest due to their prominent beneficial properties in healthcare. Nanofiber properties allow these systems to serve as bioactive compound carriers to generate functional matrices with antimicrobial, anti-inflammatory, antioxidant, antiseptic, anti-viral, and other properties which have been studied in vitro and in vivo, mostly to prove their wound healing capacity and anti-inflammation properties.

Cellulose-Based Nanofibers Processing Techniques and Methods Based on Bottom-Up Approach-A Review

In the past decades, cellulose (one of the most important natural polymers), in the form of nanofibers, has received special attention. The nanofibrous morphology may provide exceptional properties to materials due to the high aspect ratio and dimensions in the nanometer range of the nanofibers. The first feature may lead to important consequences in mechanical behavior if there exists a particular orientation of fibers. On the other hand, nano-sizes provide a high surface-to-volume ratio, which can have important consequences on many properties, such as the wettability. There are two basic approaches for cellulose nanofibers preparation. The top-down approach implies the isolation/extraction of cellulose nanofibrils (CNFs) and nanocrystals (CNCs) from a variety of natural resources, whereby dimensions of isolates are limited by the source of cellulose and extraction procedures. The bottom-up approach can be considered in this context as the production of nanofibers using various spinning techniques, resulting in nonwoven mats or filaments. During the spinning, depending on the method and processing conditions, good control of the resulting nanofibers dimensions and, consequently, the properties of the produced materials, is possible. Pulp, cotton, and already isolated CNFs/CNCs may be used as precursors for spinning, alongside cellulose derivatives, namely esters and ethers. This review focuses on various spinning techniques to produce submicrometric fibers comprised of cellulose and cellulose derivatives. The spinning of cellulose requires the preparation of spinning solutions; therefore, an overview of various solvents is presented showing their influence on spinnability and resulting properties of nanofibers. In addition, it is shown how bottom-up spinning techniques can be used for recycling cellulose waste into new materials with added value. The application of produced cellulose fibers in various fields is also highlighted, ranging from drug delivery systems, high-strength nonwovens and filaments, filtration membranes, to biomedical scaffolds.

Investigation of Mechanical, Chemical, and Antibacterial Properties of Electrospun Cellulose-Based Scaffolds Containing Orange Essential Oil and Silver Nanoparticles

This study demonstrated a controllable release properties and synergistic antibacterial actions between orange essential oil (OEO) and silver nanoparticles (AgNPs) incorporated onto cellulose (CL) nanofibers. The preparation of AgNPs attached on CL nanofibers was conducted through multiple processes including the deacetylation process to transform cellulose acetate (CA) nanofibers to CL nanofibers, the in situ synthesis of AgNPs, and the coating of as-prepared silver composite CL nanofibers using OEO solutions with two different concentrations. The success of immobilization of AgNPs onto the surface of CL nanofibers and the incorporation of OEO into the polymer matrix was confirmed by SEM-EDS, TEM, XRD, and FT-IR characterizations. The tensile strength, elongation at break, and Young’s modulus of the nanofibers after each step of treatment were recorded and compared to pristine CA nanofibers. The high antibacterial activities of AgNPs and OEO were assessed against Gram-positive B. subtilis and Gram-negative E. coli microorganisms. The combined effects of two antimicrobials, AgNPs and OEO, were distinctively recognized against E. coli.

A multifunctional, one-step gas foaming strategy for antimicrobial silver nanoparticle-decorated 3D cellulose nanofiber scaffolds

Creating nanoparticle-decorated nanofibers in a single step can greatly speed up and scale up the production of scaffolds for various applications. In this study, we report a facile multifunctional method for the simultaneous foaming and synthesis of silver nanoparticles-covered three-dimensional cellulose using sodium borohydride (NaBH4). The physicochemical properties of the 3D cellulose-Ag scaffold were evaluated and compared to 2D CA membranes, including morphology (porous 3D vs flat 2D), mechanical properties (22.72 vs <13 MPa Young's modulus), antibacterial effect (27 vs 0 mm zone of inhibition), and biocompatibility. The findings suggest that our method enables the scaffold to be easily manufactured-indicating it can be used to scale-up manufacturing processes-with high bioactivity, antibacterial effect, and biocompatibility, showing potential as a 3D structure production method for tissue engineering and other relevant applications.

Green Synthesis and Incorporation of Sericin Silver Nanoclusters into Electrospun Ultrafine Cellulose Acetate Fibers for Anti-Bacterial Applications

Fiber based antibacterial materials have gained an enormous attraction for the researchers in these days. In this study, a novel Sericin Encapsulated Silver Nanoclusters (sericin-AgNCs) were synthesized through single pot and green synthesis route. Subsequently these sericin-AgNCs were incorporated into ultrafine electrospun cellulose acetate (CA) fibers for assessing the antibacterial performance. The physicochemical properties of sericin-AgNCs/CA composite fibers were investigated by transmission electron microscopy (TEM), field emission electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR) and wide X-ray diffraction (XRD). The antibacterial properties of sericin-AgNCs/CA composite fibers against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were systematically evaluated. The results showed that sericin-AgNCs incorporated in ultrafine CA fibers have played a vital role for antibacterial activity. An amount of 0.17 mg/mL sericin-AgNCs to CA fibers showed more than 90% results and elevated upto >99.9% with 1.7 mg/mL of sericin-AgNCs against E. coli. The study indicated that sericin-AgNCs/CA composite confirms an enhanced antibacterial efficiency, which could be used as a promising antibacterial product.

CO2-assisted catalytic pyrolysis of cellulose acetate using Ni-based catalysts

Cellulose acetate (CA) is one of widely used polymers for chemical and medical applications due to its versatile physico-chemical functionalities. Although its recycle is available after a deacetylation process, the recycle process releases a huge amount of wastewater. Thus, this study investigated a direct disposal process of CA with its valorization to syngas (H₂ and CO) through pyrolysis. To construct more environmentally benign process, CO₂ was used as a co-feedstock with CA to simultaneously convert them into syngas. Pyrolysis of CA in N₂ was performed as a reference study to examine the effectiveness of CO₂ on valorization of CA. Acetic acid and methyl acetate were main volatile pyrolysates (VPs) from CA pyrolysis, and the further thermal cracking of VPs resulted in syngas and CH₄ formations under both N₂ and CO₂ conditions. To expedite syngas formations, multi-stage pyrolysis (two-stage pyrolysis) and catalytic pyrolysis were employed. With the increased thermal energy through two-stage pyrolysis, four times more production of syngas was shown, comparing to the result of a single-stage pyrolysis. With Ni catalysts, the syngas formation was the two orders of magnitude higher than the single-stage pyrolysis, and the significant enhancement of CO formation was shown in the presence of CO₂ due to combined effects of CO₂ and the Ni-based catalysts. This CO enhancement resulted from catalytically expedited gas phase reactions between CO₂ and VPs evolved from CA. In addition, the CO₂ contributed to the suppression of coke deposition on the catalyst, thereby suggesting more technical and environmental benefits of CO₂ as a reactive co-feedstock of pyrolysis in reference to N₂. Therefore, this study proved the direct and versatile technical platform to convert CA and CO₂ into syngas.

A single step ultrasound-assisted nitrocellulose synthesis from microcrystalline cellulose

Nitrocellulose is a nitrated cellulose polymer with a broad application in industry. Depending on the nitrogen content, this polymer can be used for manufacturing explosives, varnishes, clothes, and films, being considered a product of high value-added. In this work, the use of ultrasound was investigated for the intensification of nitrocellulose synthesis from microcrystalline cellulose. The ultrasound-assisted nitrocellulose synthesis (UANS) was carried out using several ultrasound systems, such as baths and cup horns, allowing the evaluation of the frequency (from 20 to 130 kHz) and delivered power (from 23 to 134 W dm^-3) to the reaction medium. The following parameters were evaluated: acid mixture (H₂SO₄, H₃PO₄, CH₂O₂ or CH₃COOH with HNO₃, 2 to 14.4 mol L^-1), ultrasound amplitude (10 to 70%) and reaction time (5 to 50 min). Better nitrocellulose yield (nitrogen content of 12.5% was obtained from 1 g of microcrystalline cellulose employing a cup horn system operating at 20 kHz, 750 W of nominal power with 60% of amplitude, 25 mL of acid solution (13.6 mL of 18.4 mol L^-1 H₂SO₄ + 9.2 mL of 14.4 mol L^-1 HNO₃ + 2.2 mL H₂O), at 30 °C for 30 min. At silent conditions (mechanical stirring ranging from 100 to 500 rpm), the nitrogen content was lower than 11.8% which demonstrate the ultrasound effects for nitrocellulose synthesis.

Preparation of a Novel Cellulose-Styrene Copolymer Adsorbent and Its Adsorption of Nitrobenzene from Aqueous Solutions

A novel cellulose–styrene copolymer adsorbent (cellulose-St) was prepared using free radical polymerization. Successful polymerization was confirmed through Fourier Transform Infrared Spectroscopy (FTIR), Carbon 13 Solid Nuclear Magnetic Resonance (¹³C NMR) Spectroscopy, Scanning Electron Microscopy (SEM), etc. Cellulose-St possessed good hydrophobicity, and the best water contact angle of cellulose-St samples could reach 146°. It had the ability of adsorption for nitrobenzene (NB), and the adsorption process could be well described by the pseudo-second-order (R² > 0.99) and three-stage intraparticle diffusion (R² > 0.99) kinetic models. Furthermore, the dynamic adsorption experiments revealed that cellulose-St had the potential for continuous separation of NB in water, and the breakthrough point for the initial NB concentration of 10 mg/L reached 1.275 L/g. Moreover, cellulose-St exhibited excellent environmental adaptability that it could maintain its hydrophobicity and adsorption ability for NB in strong acids, strong alkalis, or organic solvents. The used cellulose-St could be reused after washing with ethanol and keep almost constant adsorption capacity after ten cycles.

Simple conversion of 3D electrospun nanofibrous cellulose acetate into a mechanically robust nanocomposite cellulose/calcium scaffold

Cellulose and its derivatives are widely used as nanofibrous biomaterials, but obtaining 3D cellulose nanofibers is difficult and relevant research is scarce. In the present study, we propose a simple method for converting electrospun 3D cellulose acetate/lactic acid nanofibers via calcium hydroxide treatment into a 3D cellulose/calcium lactate nanocomposite matrix. The conversion resulted in producing a stronger nanofibrous matrix (1.382 MPa vs. 0.112 MPa) that is more hydrophilic and cell-friendly compared to the untreated cellulose acetate/lactic acid group. The successful conversion was verified via FTIR, XPS, TGA, DTG, and XRD. The ability of the scaffolds to provide a suitable environment for cell growth and infiltration was verified by CCK assay and confocal microscopy. The porous nature, mechanical strength, and presence of calcium make the 3D cellulose/calcium lactate matrix a promising material for bone tissue engineering.

Zein nanofibers via deep eutectic solvent electrospinning: tunable morphology with super hydrophilic properties

The use of organic solvents for the preparation of nanofibers are challenged due to their volatile and hazardous behavior. Recently deep eutectic solvents (DES) are widely recognized as non-volatile and non-hazardous solvents which never been utilized directly for nanofabrication via electrospinning. Here, we present the preparation of Zein nanofibers using deep eutectic solvents (DES-Zein). The DES-Zein nanofibers were produced at an optimized polymer concentration of 45% (w/w) with pH 7.3 and electroconductivity 233 mS cm-1. DES-Zein nanofibers showed aligned to tweed like cedar leaf morphology tuned by varying the spreading angle from 0° to 90°. In contrast to hydrophobic conventional Zein nanofibers, DES-Zein nanofibers showed super hydrophilic character and about 200 nm finer average diameter. The proposed method of preparing Zein nanofibers using DES opens a new door to continuous electrospinning with tunable morphology, having potential to be used for environmental and biomedical applications.

Highly Efficient Removal of Methylene Blue Dye from an Aqueous Solution Using Cellulose Acetate Nanofibrous Membranes Modified by Polydopamine

A new type of deacetylated cellulose acetate (DA)@polydopamine (PDA) composite nanofiber membrane was fabricated by electrospinning and surface modification. The membrane was applied as a highly efficient adsorbent for removing methylene blue (MB) from an aqueous solution. The morphology, surface chemistry, surface wettability, and effects of operating conditions on MB adsorption ability, as well as the equilibrium, kinetics, thermodynamics, and mechanism of adsorption, were systematically studied. The results demonstrated that a uniform PDA coating layer was successfully developed on the surface of DA nanofibers. The adsorption capacity of the DA@PDA nanofiber membrane reached up to 88.2 mg/g at a temperature of 25 °C and a pH of 6.5 after adsorption for 30 h, which is about 8.6 times higher than that of DA nanofibers. The experimental results showed that the adsorption behavior of DA@PDA composite nanofibers followed the Weber's intraparticle diffusion model, pseudo-second-order model, and Langmuir isothermal model. A thermodynamic analysis indicated that endothermic, spontaneous, and physisorption processes occurred. Based on the experimental results, the adsorption mechanism of DA@PDA composite nanofibers was also demonstrated.

Dual super-amphiphilic modified cellulose acetate nanofiber membranes with highly efficient oil/water separation and excellent antifouling properties

Along with increasing oily, industrial wastewater and seawater pollution, oil spills-and their clean-up via the separation of oil and water-are still a worldwide challenge. Aiming to fabricate an oil/water separation membrane with excellent comprehensive performance, we report here a new type of multifunctional deacetylated cellulose acetate (d-CA) membrane. The cellulose acetate (CA) nanofiber membranes are fabricated by electrospinning and then deacetylated to obtain the d-CA nanofiber membranes, which are super-amphiphilic in air, oleophobic in water, and super-hydrophilic in oil. The multifunctional d-CA nanofiber membranes can be used as water-removal substances for oil/water mixtures, as well as emulsified oil/water and oil/corrosive aqueous systems, with gravity as the only needed driving force. The d-CA nanofiber membranes possess the highest separation flux, reaching up to 38,000 L/m²·h, and the highest separation efficiency, reaching up to 99.97 % for chloroform/water mixtures under the force of gravity. In fact, the separation flux was several times higher than that of commercial CA (c-CA) membranes. The excellent anti-pollution and self-cleaning abilities endow the membranes with powerful cyclic stability and reusability. The d-CA nanofiber membranes show great application prospects in chemical plants, textile mills, and the food industry, as well as offshore oil spills, to separate oil from water.

Ionic cross-linking of cellulose nanofibers: an approach to enhance mechanical stability for dynamic adsorption

Herein, we attempt to improve the mechanical stability of anionic functionalized cellulose nanofibers (a-CNF) having 1.25 mmol of carboxymethyl groups per gram of cellulose nanofibers (CNF). The a-CNF and cross-linked a-CNF (z_a-CNF) then used for water desalination in the continuous mode using a tubular adsorption column. It is worth mentioning that the z_a-CNF possess 40% degree of cross-linking provided better mechanical stability as the tensile strength improved from 3.2 to 5.2 MPa over a-CNF. The IR spectroscopy was used to confirm the success of chemical modifications. Upon ionic cross-linking, the BET surface area reduced from 13.53 to 7.54 m²·g^-1 corresponds to a-CNF and z_a-CNF, respectively. Moreover, this research was extended to determine the dynamic adsorption capacities for a-CNF and z_a-CNF, which were found to be 21 and 10 mg·g^-1 respectively at a flow rate of 5-mL·min^-1 explained by Thomas model.

Nano-scale polysaccharide materials in food and agricultural applications

Potential applications of nanotechnology in food and agriculture include: (1) the encapsulation of functional compounds; (2) production of reinforcing materials; (3) delivery of nutraceuticals in foods; (4) food safety, for detection and control of chemical and microbiological risks; (5) active and intelligent food packaging; (6) incorporation of protective substances of seeds; (7) addition of nutrients in the soil; (8) use of controlled release pesticides. Natural polysaccharides and their derivatives are widely used in the production of nano-scale materials. This chapter examines, the use of polysaccharides, such as starch, cellulose, lignin, pectin, gums, and cyclodextrins for the production of nano-scale materials, including nanocrystals, nanoemulsions, nanocomplexes, nanocapsules, and nanofibers.

Sonication induced effective approach for coloration of compact polyacrylonitrile (PAN) nanofibers

We present our research on dyeability of polyacrylonitrile (PAN) nanofibers following ultrasonic dyeing method. Although PAN has been extensively utilized in textile apparel, sportswear, upholstery and home furnishing, however, coloration of PAN nanofibers has not yet been reported. PAN is a compact fiber while the nanofiber structure makes it more difficult to color PAN nanofibers. PAN is generally dyed with basic dyes and dyeing is carried out in acidic conditions, while the dyeing process takes about two hours at boiling temperature. A systematic study on dyeability of PAN nanofibers will extend its use in textile apparel industry. Thus, we used ultrasonic energy and first time conducted our research on dyeability of electrospun PAN nanofibers using disperse dyes. Dyeing process parameters such as dyeing time, temperatures and concentrations of dyes were optimized. Ultrasonic dyeing of PAN nanofibers was compared with its conventional dyeing as well. Affect of ultrasonic dyeing on the morphology, chemical state, crystallographic structure and mechanical strength of PAN nanofibers has been studied. PAN nanofiber samples were characterized by SEM, FTIR, XRD and tensile strength tests. The results revealed 80 °C and 60 min as optimum temperature and time for ultrasonic dyeing of PAN nanofibers. The ultrasonic dyeing does not affect morphology, chemical and crystalline structure of the PAN nanofibers while it improves their mechanical strength. Our research suggests dyeability of PAN nanofibers with disperse dyes by ultrasonic method and their subsequent use in textile apparels.

Breathable and Colorful Cellulose Acetate-Based Nanofibrous Membranes for Directional Moisture Transport

Textiles with excellent moisture transport characteristics play key role in regulating comfort of the body, and use of color in textiles helps in developing aesthetically pleasing apparels. Herein, we report an aesthetically pleasing and breathable dual-layer cellulose acetate (CA) based nanofibrous membranes with exceptional directional moisture transport performance. The outer layer was synthesized by subjecting CA nanofibers to hydrolysis and reactive dyeing processes, which converted moderately hydrophobic CA nanofibers into uniformly colored superhydrophilic CA nanofibers with an excellent wettability. In addition to excellent wettability and superhydrophilic nature, dyed CA (DCA) nanofibers also offered high color yield and dye fixation as well as considerable colorfastness performance against washing and light, thus, were used as the outer layer. However, pristine CA nanofibers were chosen as the inner layer for their moderate hydrophobicity. The subsequent CA/DCA nanofiber membrane produced a high wettability gradient, which facilitated directional moisture transport from CA to DCA layers. The resultant dual-layer nanofiber membranes offered a high color yield of 16.33 with ∼82% dye fixation, excellent accumulative one-way transport capacity (919%), remarkable overall moisture management capacity (0.89), and reasonably high water vapor transport rate (12.11 kg d^-1 m^-2), suggesting them to be a potential substrate for fast sweat-release applications.

Ultra-sonication assisted cross-linking of cellulose polymers

Cross-linked cellulose-epichlorohydrin polymers were synthesized by a conventional heating with stirring (C-EP heating) and a parallel process using ultra-sonication (C-EP sonication) in the presence of aqueous ammonia. Structural characterization of modified cellulose was carried out using FTIR/¹³C solid state NMR spectroscopy and thermal methods (DSC and TGA). Evidence of products with variable textural properties and morphology was supported by nitrogen gas adsorption, solvent swelling, and microscopy (SEM, TEM) results. C-EP sonication possess greater cross-linker content judging by the loss of the cellulose fibril structure which was facilitated by acoustic cavitation effects due to ultra-sonication. Equilibrium sorption studies in aqueous solution with 2-naphthoxy acetic acid (NAA) revealed that C-EP heating had slightly greater sorption capacity than C-EP sonication at alkaline pH. By contrast, C-EP sonication had greater uptake of NAA at acidic pH. Kinetic uptake studies at pH 3 is described by the pseudo-second order model, where the surface sites of C-EP heating became saturated within ca. 75 min; whereas, ca. 350 min occurred for C-EP sonication. This study demonstrates that the yield of sonication assisted cross-linking of cellulose is greater with improved adsorption properties. The study also reveals the utility of sonication assisted synthesis for the valorization and utilization of cellulose modified materials.

Sugar-cane bagasse derived cellulose enhances performance of polylactide and polydioxanone electrospun scaffold for tissue engineering

Bagasse is a waste product of sugar extraction from sugar-cane with approximately 30% cellulose content. Cellulose was successfully extracted from sugar-cane bagasse using a modified mercerization-bleaching approach with a 40% yield. Extracted cellulose was converted to cellulose acetate for enhanced electrospinnability and blended with poly-l-Lactide or polydioxanone before solution electrospinning. Physico-chemical evaluation of the electrospun mats showed variable miscibility of blends. In vitro cell studies with L929 mouse fibroblast cells was quite conclusive as regards the biocompatibility of the blended mats with proliferative behavior of cells, extracellular matrix deposition and characteristic features of healthy cellular response. MTT assay indicated that the cellulose blended mats induced higher cell densities than the controls. Cellulose content influenced parameters such as fiber diameter, porosity and cell-matrix interaction of mats impacting on cell growth and behavior. Preliminary assessment of biomineralization potential of the mats by SEM showed nano-hydroxyapatite deposits on the electrospun fibers.