Use of PVA/α-MnO2-stearic acid nanocomposite films prepared by sonochemical method as a potential sorbent for adsorption of Cd (II) ion from aqueous solution

A novel green synthesis of MnO2-Coal composite for rapid removal of silver and lead from wastewater

The presence of Ag(I) and Pb(II) ions in wastewater poses a significant threat to human health in contemporary times. This study aims to explore the development of a novel and economical adsorbent by grafting MnO2 particles onto low-rank coal, providing an innovative solution for the remediation of water contaminated with silver and lead. The synthesized nanocomposites, referred to as MnO2-Coal, underwent thorough characterization using FTIR, XRD, BET, and SEM to highlight the feasibility of in-situ surface modification of coal with MnO2 nanoparticles. The adsorption of Ag(I) and Pb(II) from their respective aqueous solution onto MnO2-Coal was systematically investigated, with optimization of key parameters such as pH, temperature, initial concentration, contact time, ionic strength, and competing ions. Remarkably adsorption equilibrium was achieved within a 10 min, resulting in impressive removal rates of 80-90 % for both Ag(I) and Pb(II) at pH 6. The experimental data were evaluated using Langmuir, Freundlich, and Temkin isotherm models. The Langmuir isotherm model proved to be more accurate in representing the adsorption of Ag(I) and Pb(II) ions onto MnO2-Coal, exhibiting high regression coefficients (R2 = 0.99) and maximum adsorption capacities of 93.57 and 61.98 mg/g, along with partition coefficients of 4.53 and 71.92 L/g for Ag(I) and Pb(II), respectively, at 293 K. Kinetic assessments employing PFO, PSO, Elovich, and IPD models indicated that the PFO and PSO models were most suitable for adsorption mechanism of Pb(II) and Ag(I) on MnO2-Coal composites, respectively. Moreover, thermodynamic evaluation revealed the spontaneous and endothermic adsorption process for Ag(I), while exothermic behavior for adsorption of Pb(II). Importantly, this approach not only demonstrates cost-effectiveness but also environmental friendliness in treating heavy metal-contamination in water. The research suggests the potential of MnO2-Coal composites as efficient and sustainable adsorbents for water purification applications.

Functional Ag-EDTA-modified MnO2 nanocoral reef for rapid removal of hazardous copper from wastewater

A novel MnO2@EDTA-Ag nanocoral reef was constructed via a simplified redox reaction followed by EDTA and Ag nanoparticles impregnation to capture hazardous copper (II) from wastewater. A comprehensive characterization of the synthesized materials was conducted. The morphology of MnO2@EDTA-Ag in the form of a nanocoral reef was constructed of two-dimensional nanoplatelets and nanorod-like nanostructures. The optimal adsorption conditions proposed by the Plackett-Burman design (PBD) that would provide a removal % of 99.95 were pH 5.5, a contact time of 32.0 min, a Cu(II) concentration of 11.2 mg L-1, an adsorbent dose of 0.05 g, and a temperature of 40.3 °C. The loading of Ag nanoparticles onto MnO2@EDTA improved the adsorption capability of MnO2@EDTA-Ag. Additionally, the recyclability of MnO2@EDTA-Ag nanocoral reef was maintained at 80% after three adsorption-desorption cycles, and there was no significant change in the XRD analysis before and after the recycling process, implying its stability. It was found that nanocoral reef-assisted EDTA formed a chelation/complexation reaction between COO- groups and C-N bonds of EDTA with Cu(II) ions. In addition, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis proved the synergistic effect of the electrostatic interaction and chelation/complexation was responsible for the removal mechanism of Cu(II). Also, the results demonstrated no significant variation in MnO2@EDTA-Ag removal efficiency for all the tested real water samples, revealing its efficacy in wastewater treatment. Therefore, the current study suggests that MnO2@EDTA-Ag has substantial potential to be used as a feasible adsorbent for probable hazardous metals remediation.

How APTMS Acts as a Bridge to Enhance the Compatibility of the Interface between the Hydrophilic Poly(vinyl alcohol) Film and the Hydrophobic Stearic Acid Coating

The hydrophobic modification of poly(vinyl alcohol) (PVA) film as a biodegradable packaging material has received significant attention in recent research. Despite the use of stearic acid (SA) as a coating for the PVA film, a challenge persists due to the poor compatibility between SA and PVA. This study addressed the aforementioned issue by utilizing (3-aminopropyl)trimethoxysilane (APTMS) as a bridging agent to establish a connection between the hydrophilic PVA film and the hydrophobic SA coating through hydrogen bonding and chemical reactions. First, SEM and EDS analyses confirmed the enhanced interfacial compatibility between the SA coating and the PVA film. Subsequently, the results from 1H NMR, FTIR, and XPS experiments presented evidence of hydrogen bonding and chemical reactions among APTMS, SA, and the PVA film. Interestingly, the PVA-APTMS-SA film demonstrated a contact angle of 120.77°, a water absorption of 7.81%, and a water vapor transmission rate of 8.69 g/m2/h. Furthermore, such a composite film displayed exceptional adhesion performance, requiring detachment stresses of 9.86 ± 0.91 and 6.17 ± 0.75 MPa when tested on glass and marble surfaces, respectively. In conclusion, the PVA-APTMS-SA film exhibited significant potential in extending the freshness of fresh-cut apples, making it a promising eco-friendly packaging material for food preservation.

Treatment of drilling fluid waste during oil and gas drilling: a review

Oil and gas exploration and development provide important energy sources for the world, and drilling fluid is an essential engineering material for oil and gas exploration and development. During the drilling of oil wells, drilling fluids are eventually discarded as waste products after many cycles. Abandoned drilling fluid constitutes one of the largest wastes generated during oil and gas exploration and development. Drilling fluid contains many chemicals, which turn into pollutants during use. Furthermore, when drilling is carried out to reach reservoir, the drilling fluid becomes contaminated with crude oil. It may also mix with groundwater containing salts and heavy metals. The resulting pollutants and harmful substances threaten the environment, humans, animals, and plants. The variety and complexity of drilling fluid waste have increased in recent years. Various countries and regions are paying more attention to the ecological environment, and effective methods are urgently needed to solve problems associated with of environmental pollution caused by drilling fluid wastes. At present, various physical, chemical, and biological methods have been proposed for the treatment of drilling fluid wastes: safe landfilling, stabilization/solidification treatment, physicochemical treatment, thermal treatment, supercritical fluid treatment, bioremediation, etc. All of these methods show promising characteristics, and they each have advantages and limitations; thus, treatment methods need to be selected according to the actual application scenarios. This critical overview is based on an extensive literature review, and it summarizes and expounds on the current drilling fluid waste treatment technologies and proposes views future potential and outlook.

Microwave-assisted synthesis of MnO2 nanosorbent for adsorptive removal of Cs(I) and Sr(II) from water solutions

In this study, a flower-like porous δ-MnO₂ nanostructure was synthesized by a microwave-assisted hydrothermal process for adsorptive removal of strontium (Sr(II)) and cesium (Cs(I)) from wastewater. The prepared δ-MnO₂ nanosorbent exhibited superior affinity for Sr(II) over Cs(I) in the single-solute system, with partition coefficient (PC) values of 10.2 and 2.3 L/g, respectively, at pH 6.0. In the two-solute system, the flower-like δ-MnO₂ also adsorbed Sr(II) (PC = 3.81 L/g) more selectively than Cs(I) (PC 1.15 L/g). Further, their adsorption capacities decreased by 12 and 16%, respectively, relative to the single-solute system. In contrast, adsorption of the ions onto δ-MnO₂ was affected less sensitively in dual than in single system when changes occurred in environmental variables such as pH (2-8) and ionic strength (1-100 mM). Adsorption kinetics, thermodynamics, and isotherm studies demonstrated the pivotal role of the monolayer surface active sites of endothermic δ-MnO₂ (e.g., a complexation interaction with Mn-OH). Furthermore, the δ-MnO₂ nanosorbent exhibited good regenerability, retaining more than 80% of its adsorption capacity when tested over four reuse cycles. The overall results of this study are expected to help establish strategies to effectively remove metal contaminants from wastewater using a green and low-cost hierarchical nanosorbent.

A, Choe Y. A novel β-MnO2 and carbon nanotube composite with potent electrochemical properties synthesized using a microwave-assisted method for use in supercapacitor electrodes

In this work, we report the synthesis of a novel β-MnO2/CNT nanocomposite with good electrical conductivity for high-performance supercapacitors via a microwave-assisted method.

Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review

The concentrations of heavy metal ions found in waterways near industrial zones are often exceed the prescribed limits, posing a continued danger to the environment and public health. Therefore, greater attention has been devoted into finding the efficient solutions for adsorbing heavy metal ions. This review paper focuses on the synthesis of carbon nanotubes (CNTs) from biomass and their application in the removal of heavy metals from aqueous solutions. Techniques to produce CNTs, benefits of modification with various functional groups to enhance sorption uptake, effects of operating parameters, and adsorption mechanisms are reviewed. Adsorption occurs via physical adsorption, electrostatic interaction, surface complexation, and interaction between functional groups and heavy metal ions. Moreover, factors such as pH level, CNTs dosage, duration, temperature, ionic strength, and surface property of adsorbents have been identified as the common factors influencing the adsorption of heavy metals. The oxygenated functional groups initially present on the surface of the modified CNTs are responsible towards the adsorption enhancement of commonly-encountered heavy metals such as Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Cr⁶⁺. Despite the recent advances in the application of CNTs in environmental clean-up and pollution treatment have been demonstrated, major obstacles of CNTs such as high synthesis cost, the agglomeration in the post-treated solutions and the secondary pollution from chemicals in the surface modification, should be critically addressed in the future studies for successful large-scale applications of CNTs.

Nano-manganese oxide and reduced graphene oxide-incorporated polyacrylonitrile fiber mats as an electrode material for capacitive deionization (CDI) technology

Capacitive deionization (CDI) is a trending water desalination method during which the impurity ions in water can be removed by electrosorption. In this study, nano-manganese dioxide (MnO2) and reduced graphene oxide (rGO)-doped polyacrylonitrile (PAN) composite fibers are fabricated using an electrospinning technique. The incorporation of both MnO2 and rGO nanomaterials in the synthesized fibers was confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The electrochemical characteristics of electrode materials were examined using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and constant current charge-discharge cycles (CCCDs). The specific capacitance of the PAN electrode increased with increasing MnO2 and rGO contents as well as when thermally treated at 280 °C. Thermally treated composite fibers with 17% (w/w) MnO2 and 1% (w/w) rGO (C-rGOMnPAN) were observed to have the best electrochemical performance, with a specific capacitance of 244 F g-1 at a 10 mV s-1 scan rate. The electrode system was used to study the removal of sodium chloride (NaCl), cadmium (Cd2+) and lead (Pb2+) ions. Results indicated that NaCl showed the highest electrosorption (20 472 C g-1) compared to two heavy metal salts (14 260 C g-1 for Pb2+ and 6265 C g-1 for Cd2+), which is most likely to be due to the ease of mass transfer of lighter Na+ and Cl- ions; When compared, Pb2+ ions tend to show more electrosorption on these fibers than Cd2+ ions. Also, the C-rGOMnPAN electrode system is shown to work with 95% regeneration efficiency when 100 ppm NaCl is used as the electrolyte. Hence, it is clear that the novel binder-free, electrospun C-rGOMnPAN electrodes have the potential to be used in salt removal and also for the heavy metal removal applications of water purification.

Adsorption of Methyl Orange from Aqueous Solution Using PVOH Composite Films Cross-Linked by Glutaraldehyde and Reinforced with Modified α-MnO2

A poly(vinyl alcohol) (PVOH) composite cross-linked with glutaraldehyde (GL) containing α-MnO₂ modified with stearic acid (ST) was fabricated as an efficient sorbent for capturing methyl orange (MO) dye from the water system. We investigated the factors affecting MO adsorption in detail. The adsorption process showed a high dependence on the pH value. The highest removal efficiency (96.5%) was obtained at pH 2. The adsorption isotherm study indicated that the linear Freundlich isotherm was a more appropriate model for the adsorption process. The adsorption kinetics study revealed that the adsorption data matched with a nonlinear pseudo-first-order model. Physical adsorption interactions, including electrostatic interactions, hydrogen bonds, and dipole-dipole forces, play dominant roles in this process. Thermodynamic investigations confirmed that MO adsorption was spontaneous and exothermic with physical interactions. The outcomes demonstrated that the cross-linked PVOH-GL/α-MnO₂-ST composite could be a hopeful sorbent for the efficient uptake of MO molecules from polluted waters.

Influence of elevated atmospheric CO2 levels on phytoremediation effect of Festuca arundinacea intercropped with Echinochloa caudata

Atmospheric CO₂ levels have been increasing with increasing industrialization. Studies have shown the growth response of various plant species to climate change and increasing CO₂ levels, but variations in phytoremediation caused by elevated CO₂ levels, especially in intercropping systems, have rarely been reported. The current study therefore revealed variations in the phytoremediation effect of Festuca arundinacea intercropped with Echinochloa caudata, a pernicious annual weed, exposed to various CO₂ levels (280, 400, and 550 ppm). The biomass yield and Cd uptake capacity of monocultured F. arundinacea were found to increase with increasing atmospheric CO₂ level, highlighting the promoted phytoremediation efficiency of this species under elevated CO₂ levels. Elevated CO₂ levels also significantly increased the dry weight of monocultured E. caudata but did not change the Cd content in various parts of the plant. However, the intercropping system decreased the biomass yield of belowground and aerial parts of F. arundinacea under all treatments, since E. caudata competed with it for water and nutrients. The weight reduction of F. arundinacea in the intercropping system increased with increasing CO₂ level, because elevated CO₂ significantly increased the competitiveness of the weed. Therefore, the Cd phytoremediation efficiency of F. arundinacea intercropped with E. caudata exposed to 280, 400, and 550 ppm CO₂ decreased by 46.1%, 81.5%, and 215.0%, respectively, as evidenced by the decreased dry weight of F. arundinacea. Therefore, elevated CO₂ levels could decrease the phytoremediation effect of F. arundinacea in fields where weed growth is unavoidable.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Photocatalytic activity and water purification performance of in situ and ex situ synthesized bacterial cellulose-CuO nanohybrids

The aim of this research was synthesizing of bacterial cellulose (BC) nanohybrids by incorporation of CuO-NPs and evaluation of their ability in the removing of microbial, heavy metals, and dyes pollutants from water. CuO-BC nanohybrids were synthesized by two in situ (sonochemical and precipitation) methods and compared with ex situ synthesized nanohybrid. FE-SEM images revealed that the growth of CuO-NPs in the sonochemically synthesized in situ substrate is better. The ex situ nanohybrid had the highest loading capacity (27.17 μg/cm² ) but the migration of CuO-NPs from this substrate was higher than in situ ones. According to antimicrobial tests, 80% and 90% of initial population of E. coli and S. aureus, respectively, were removed after 6 hr contact of substrates with water. The potential of the substrates in the adsorption of lead and arsenic was about 60% after 24 hr. About 75% of methylene blue and methyl orange dyes were adsorbed into substrates after 6 hr. CuO doped substrates had the photocatalytic activity and caused to decrease the oxygen content about 4%-7% during 6 hr. In general, the reusability of ex situ synthesized substrate was lower than in situ nanohybrids. Sonochemically synthesized substrate was suggested as the best nanohybrid for water purification applications in terms of morphological properties and reusability. PRACTITIONER POINTS: CuO-BC nanohybrids were prepared by in-situ and ex-situ methods. Well distribution of NPs and slower release was achieved by in-situ methods. Antimicrobial and photocatalytic activity of ex-situ nanohybrid was higher than in-situ ones. Dyes and heavy metals were removed successfully with nanohybrid substrates. Sonochemical in-situ nanohybrid exhibited the best water purification performance.

Ultrasonic-assisted recycling of Nile tilapia fish scale biowaste into low-cost nano-hydroxyapatite: Ultrasonic-assisted adsorption for Hg2+ removal from aqueous solution followed by "turn-off" fluorescent sensor based on Hg2+-graphene quantum dots

This study was planned to recycle calcium and the phosphorus-rich Nile tilapia fish scale biowaste into nano-hydroxyapatite (FHAP), using ultrasonic-assisted extraction of calcium and phosphorus from fish scales, which was optimized in term of extraction time, acid concentration, extraction temperature, and ultrasonic power. These two elements were determined simultaneously by inductively coupled plasma atomic emission spectrometry and the FHAP phase was formed upon addition of the extracted element solution in alkaline medium using homogenous precipitation assisted with ultrasound energy. The FHAP adsorbent was characterized by x-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller. A combination of FHAP and the ultrasonic method was then used to remove Hg²⁺ from aqueous solution. Four significant variables affecting Hg²⁺ removal, namely, adsorbent dosage, pH, ultrasonic power, and adsorption time, were studied. The results exhibited that the optimal conditions for maximizing the removal of Hg²⁺ were 0.02 g adsorbent dosage, pH 8, 0.4 kW ultrasonic power, 20 min adsorption time, and 30 °C adsorption temperature. The sorption mechanism of Hg²⁺ was revealed by isotherm modeling, indicating that FHAP adsorbent has a potential for Hg²⁺ removal in aqueous media with the maximum adsorption capacity being 227.27 mg g^-1. This adsorption behavior is in agreement with the Langmuir model as reflected by a satisfactory R² value of 0.9967, when the kinetics data were fitted with pseudo-second-order. Therefore, the FHAP could be an alternative adsorbent for the ultrasonic-assisted removal of Hg²⁺ at very high efficiency and within a very short period of time.

Recent trends of MnO2-derived adsorbents for water treatment: a review

Over the years, manganese dioxide (MnO₂) and its different allotropes have gained significant research attention in the field of wastewater treatment because of their exciting physicochemical properties.

Design and identification of poly(vinyl chloride)/layered double hydroxide@MnO2 nanocomposite films and evaluation of the methyl orange uptake: linear and non-linear isotherm and kinetic adsorption models

In this work, an adsorbent based on poly(vinyl chloride) (PVC) for the removal of methyl orange (MO) dye is proposed.

Simple construction of core–shell MnO2@TiO2 with highly enhanced U(vi) adsorption performance and evaluated adsorption mechanism

Simple construction of core–shell MnO₂@TiO₂ with highly enhanced U(vi) adsorption performance and evaluation of its adsorption mechanism.

Using sonochemistry for the production of poly(vinyl alcohol)/MWCNT–vitamin B1 nanocomposites: exploration of morphology, thermal and mechanical properties

Functionalized MWCNTs with vitamin B₁ as a green material were applied for the enhancement of poly(vinyl alcohol) properties.

Production of polyimide ceria nanocomposites by development of molecular hook technology in nano-sonochemistry

Poly(amic acid), the precursor of polyimide (PI), was used for the preparation of PI/CeO₂ nanocomposites (NC)s by ultrasonic assisted technique via insertion of the surface modified CeO₂ nanoparticles (NP)s into PI matrix. In the preparation stages, in the first, the modifications of CeO₂ NPs by using hexadecyltrimethoxysilane (HDTMS) as a binder were targeted using ultrasonic waves. In the second step, newly designed PI structure was formed from the sonochemical imidization process as a molecular hook. In this step two different reactions were occurred. The acetic acid elimination reaction in the main chain of macromolecule, and the acetylation reaction in the side chains of poly(amic acid) were accomplished. By acetylation process the hook structure was created for trapping of the modified nanoparticles. In the final step the preparation of PI NCs were achieved by sonochemical process. The structural and thermal properties of pure PI and PI/CeO₂ NCs were studied by several techniques such as fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (NMR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and thermal analyses. FT-IR and ¹H NMR spectra confirmed the success in preparation of PI matrix. The FE-SEM, TEM, and AFM analyses showed the uniform distribution of CeO₂ NPs in PI matrix. The XRD patterns of NCs show the presence of crystalline CeO₂ NPs in amorphous PI matrix. The thermal analysis results reveal that, with increases in the content of CeO₂ NPs in PI matrix, the thermally stability factors of samples were improved.

Sonochemical synthesis of PVA/PVP blend nanocomposite containing modified CuO nanoparticles with vitamin B1 and their antibacterial activity against Staphylococcus aureus and Escherichia coli

The aim of this paper was to blend the polymers, poly(N-vinyl-2-pyrrolidone) (PVP) and poly(vinyl alcohol) (PVA) to produce a novel composite materials possessing the benefits of both. CuO nanoparticles (NPs) were used as a suitable filler to fabricate the blend nanocomposites (NCs) with desired properties. First, the surface of NPs, was modified with vitamin B₁ (VB₁) as a bio-safe coupling agent. Then, the blend NCs with various ratios of modified CuO (3, 5, and 7 wt%) were fabricated under ultrasonic irradiations followed by casting/solvent evaporation method. These processes are fast and green way to disperse the NPs sufficiently. Several techniques were applied for the characterization of the obtained NCs. morphology examination demonstrated the morphology of NCs and compatibility of NPs with the blend polymer. EDX results indicated the weight and atomic percentage of the achieved materials. TGA analysis verified that the NCs show higher thermal properties than the neat blend polymer. Also embedding the modified NPs into the blend polymer had effected on optical absorbance of the obtained NCs. The contact angle measurements confirmed that the hydrophilicity decreased for different proportions of the modified NPs loaded in the blend polymer. Finally, NCs show better bactericidal effects against gram-positive than gram-negative bacteria.

A scalable ultrasonic-assisted and foaming combination method preparation polyvinyl alcohol/phytic acid polymer sponge with thermal stability and conductive capability

In this article, polyvinyl alcohol/phytic acid polymer (PVA/PA polymer) is synthesized from PVA and PA via the esterification reaction of PVA and PA in the case of acidity and ultrasound irradiation, and PVA/PA polymer sponge is prepared via foaming PVA/PA polymer in the presence of n-pentane and ammonium bicarbonate, and the structure of PVA/PA polymer and the structure, morphology and crystallinity of PVA/PA polymer sponge are characterized, and the thermal stability and surface resistivity of PVA/PA polymer sponge are investigated. Based on these, it has been attested that PVA/PA polymer synthesized under the acidity and ultrasound irradiation and PVA/PA polymer sponge are structured by the chain of PVA and the cricoid PA connected in the form of ether bonds and phosphonate bonds, and the thermal stability of PVA/PA polymer sponge attains 416.5 °C, and the surface resistivity of PVA/PA polymer sponge reaches 5.76 × 10⁴ ohms/sq.

Ultrasonic-assisted manufacturing of new hydrogel nanocomposite biosorbent containing calcium carbonate nanoparticles and tragacanth gum for removal of heavy metal

This article reports the first incorporation of calcium carbonate nanoparticles (CC NPs) into tragacanth gum (TG) to prepare a new hydrogel nanocomposite (HNC) system using a green, safe, and eco-friendly method, ultrasound irradiation as an efficient biosorbent of heavy metal ions from wastewater. Morphological studies revealed that the surface of obtained HNCs is rough, homogeneous, and porous-like due to the embedding of CC NPs as well as sonication in comparison to the neat TG which has a smooth surface. The particle size reduction was observed for CC NPs in the matrix (from 57 to 10 nm), which is owing to the extraordinary effect of sonication on this process. Thermal stability of HNCs has been increased after using CC NPs from 8.5 wt% for TG to about 22 wt% for HNCs. The optical band gap of TG/CC HNC 5 wt% calculated to be 4.46 eV which is less than that of CC NPs (5.58 eV) and even TG (6.28 eV) and this result indicated that TG/CC HNC 5 wt% is relatively more conductive than CC NPs and TG. The nitrogen adsorption-desorption disclosed an isotherm type III of Brunauer classification for TG/CC HNC 5 wt% and the surface area has been increased from 0.7 m².g^-1 for TG to 2.3 m².g^-1 for TG/CC HNC 5 wt%. Also, the BET surface area for TG/CC HNC 5 wt% calculated to be 7.8 nm which is classified into mesoporous materials. The Pb²⁺ ions were significantly removed from water using TG/CC HNC 5 wt% and the removal efficiency was determined as 83% at optimized conditions (pH = 5, adsorbent dosage = 0.015 g, time = 3 h, and Pb²⁺ concentration = 70 mg.L^-1).

Employment of ultrasonic irradiation for production of poly(vinyl pyrrolidone)/modified alpha manganese dioxide nanocomposites: Morphology, thermal and optical characterization

This work explains the production, morphology, and features of novel nanocomposite (NC) established on poly(vinyl pyrrolidone) (PVP) as polymer background and modified alpha manganese dioxide (α-MnO₂) nanorod (NR) asan efficient filler. At first, one-dimensional α-MnO₂ nanorods (NRs) were produced by a hydrothermal technique and then they were amended with stearic acid (SA) by a solvothermal process. In following, the NCs were made by adding different volumes of α-MnO₂-SA NR (1, 3 and 5wt%) in the PVP matrix through ultrasonic irradiation as a green, low-cost, fast, and useful technique. Structural and morphological descriptions confirm crystallinity of α-MnO₂-SA NRs and showed that NRs have been separately dispersed in PVP matrix with rod-like morphology and diameter of about 40-60nm. The use of modifier and ultrasonic waves is accountable for good homogeneities of NRs. Thermogravimetric analysis revealed that thermal permanency of the obtained NCs has grown with increasing the α-MnO₂-SA content. Also, the UV-vis absorption of NCs was enhanced with the incorporation of the modified α-MnO₂ NR in PVP matrix. The substantial perfections in NCs properties are associated to compatible intermolecular relations between the surface modifying groups of the α-MnO₂-SA and PVP chain.

Surface modified SiO2 nanoparticles by thiamine and ultrasonication synthesis of PCL/SiO2-VB1 NCs: Morphology, thermal, mechanical and bioactivity investigations

The influence of silica (SiO₂) nanoparticles (NPs) on the properties of polycaprolactone (PCL) was investigated. Due to the intense tendency of SiO₂ NPs to aggregation and their high surface energy, the surface of SiO₂ NPs was treatment via Vitamin B₁ (VB₁) as a biosafe coupling agent. Novel PCL/SiO₂-VB₁ nanocomposites (NC) films by variety of percentage of SiO₂-VB₁ NPs were prepared under ultrasonic irradiation as an eco-friendly and fast procedure following by casting method. Fourier transform infrared spectroscopy and energy dispersive X-ray analysis exposed the presence of SiO₂ NPs into the polymer matrix. A good distribution of the silica into the polymer matrix was detected by microscopic observations and EDX testing. According to the UV-Vis spectra, the absorption of prepared NCs was improved via increasing the amount of SiO₂ NPs. PCL/SiO₂-VB₁ NCs showed more thermal stability compared to the pure polymer. The tensile test was investigated and good arrangement among the experimental data and the predicted flexibility of NCs was obtained. Moreover, PCL/SiO₂-VB₁ 6wt% had noticeable increase values for tensile strength. Finally, in vitro bioactivity investigation designated that by rising SiO₂ contents in the NCs, the amount of the hydroxyapatite formed was increased and NC films are bioactive and have a potential to be utilized in bone tissue engineering.

The influence of bovine serum albumin-modified silica on the physicochemical properties of poly(vinyl alcohol) nanocomposites synthesized by ultrasonication technique

In this study, for the first time polymeric nanocomposite (NC) films of poly(vinyl alcohol)/SiO₂@bovine serum albumin (PVA/SiO₂@BSA) were synthesized by solution casting method under facile and fast method of sonication. In this regard, SiO₂ nanoparticles (NPs) were modified by BSA, at room temperature by using phosphate buffer and ultrasonic-assisted method. Then, PVA/SiO₂@BSA NCs were prepared by insertion of variant amount (3, 6 and 9wt%) of SiO₂@BSA into the PVA matrix, under ultrasonic irradiation. The morphological traits of the NCs were surveyed by Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray diffraction and field emission scanning electron microscopy. It was detected that NPs incorporation didn't remarkably affect the crystallinity and morphology of the NCs. TEM images indicated that the inserted NPs have good diffusions in the PVA matrix, and their embedment in the matrix significantly upgraded its thermal, optical and mechanical behaviors. The tensile strength showed more than 2-fold increase and the thermal stability exhibited about 37% enhancement that was higher, in comparison with those of the similar NCs. This showed that the prepared NCs can have potential application in food packaging.∗∗∗.

Ultrasonic-assisted fabrication of starch/MWCNT-glucose nanocomposites for drug delivery

The principal focus of this investigation is to prepare starch nanocomposite (NC) films containing multi-walled carbon nanotube (MWCNT) and apply these NCs for drug delivery. Firstly, to raise the hydrophilicity of carboxyl functionalized MWCNT, the surface of them was modified with d-glucose (Gl) as a low cost and environmentally friendly biomolecule. Different percentages of MWCNT-Gl (0.5, 1 and 2wt%) were embedded in starch matrix through sonochemical method as an economical, fast, eco-friendly, and effective method. The properties of starch/MWCNT-Gl NCs were characterized using Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, field emission scanning electron microscopy and transmission electron microscopy (TEM). Afterwards, pure starch and starch/MWCNT-Gl NCs were reacted with oleic acid to obtain amphiphilic (Amph) esters. Except Amph obtained from pure starch, other Amph esters could convert to drug-loaded nanoparticles which were characterized by dynamic light scattering and TEM. The sizes of nanoparticles depended on the value of MWCNT-Gl. The thinnest particles obtained from starch/MWCNT-Gl NCs containing the highest value of MWCNT-Gl (2wt%), and this system was chosen for measurement of entrapment efficiency, loading capacity and in vitro release study for zolpidem as a hydrophobic drug model.

Capturing Cd2+ ions from wastewater using PVA/α-MnO2–oleic acid nanocomposites

A poly(vinyl alcohol) nanocomposite containing α-MnO₂–oleic acid has been fabricated as an efficient adsorbent for capturing Cd²⁺ ions from aqueous solution.

Ultrasonication synthesis of PVA/PVP/α-MnO2-stearic acid blend nanocomposites for adsorbing CdII ion

In this research, the functionalization of α-MnO₂ nanorods (NRs) was conducted with stearic acid (SA) through solvothermal technique. The α-MnO₂-SA NRs were used as nanofiller for the preparation of blend nanocomposites (NCs) based on poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) by ultrasonic irradiation. The results exhibit that with increasing in α-MnO₂-SA quantity, the thermal stability of blend NCs was improved. Morphological studies revealed that α-MnO₂-SA with rod structure and a diameter size of 25-80nm was uniformly dispersed in the PVA and PVP matrices. The use of ultrasonic was responsible for these great homogeneities which could not be achieved by mechanical or magnetically stirring. The prepared blend NCs were exploited as an adsorbing for uptake of Cd^II ion from the aqueous system. The results indicated that they can be potentially utilized for the elimination of Cd^II ion from an aqueous system with q_m of 47(mgg^-1).

Sono-assisted preparation of bio-nanocomposite for removal of Pb2+ ions: Study of morphology, thermal and wettability properties

Multi-walled carbon nanotubes (MWCNT) loaded poly(ethylene terephthalate) (PET) composites, with different CNT contents, were fabricated through an ultrasound assisted method as a fast and green way. Then, the obtained composites were fully characterized via FT-IR, UV-Vis, XRD, TGA, FE-SEM and TEM, etc. For this purpose, PET bottle was recycled and applied as matrix of nanocomposites (NC)s. Then, we dispersed the covalent functionalization of MWCNTs with a protein dispersant and obtained a powder of protein-functionalized CNTs. Bio-functionalized MWCNTs showed higher Pb²⁺ removal efficiency compared to MWCNT-COOH as ascertained via batch equilibrium adsorption experiments. Also, the results indicated the novel NCs presents a high affinity for Pb²⁺ heavy metal owing to the presence of several good sites. The contact angle results indicated that the addition of MWCNT-BSA increased significantly the contact angle compared to the pure PET. It was concluded that inflame retarding feature of NC was higher than pure polymer.

Ultrasonic-assisted fabrication and characterization of PVC-SiO2 nanocomposites having bovine serum albumin as a bio coupling agent

In this work, SiO₂ nanoparticles (NPs) were modified with bovine serum albumin (BSA) under ultrasound irradiations as a green and fast route to achieve their good dispersion. Subsequently, different weight percentages of the modified NPs (3, 6, and 9wt%) were incorporated in poly(vinyl chloride) (PVC) as the matrix. Thermogravimetric analysis of the SiO₂-BSA NPs indicated that 12wt% of the modifier was loaded on the surface of SiO₂ NPs. Encapsulation of the SiO₂-BSA resulted in a meaningful improvement in the optical, mechanical and thermal characteristics of the prepared PVC nanocomposites (NCs). X-ray diffraction (XRD) patterns for the PVC/SiO₂-BSA NCs showed a crystalline behavior for the NC with 6wt% of the SiO₂-BSA originated from the phosphate buffer on the NPs. Water contact angle of the PVC/SiO₂-BSA NCs showed that the hydrophilicity enhanced with increasing of the NPs contents.

Facile and cost-effective preparation of PVA/modified calcium carbonate nanocomposites via ultrasonic irradiation: Application in adsorption of heavy metal and oxygen permeation property

This work is focused on the fabrication and determination of physicochemical behaviors of new poly(vinyl alcohol) (PVA) nanocomposites (NCs) containing various contents of calcium carbonate (CC) nanoparticles modified with γ-aminopropyl triethoxy silane (ATS) (henceforth designated as CC-ATS) which could be a crucial treatment for their application as gas barrier to O₂ gas and uptake of metal ions in waste waters. Samples were produced through the solution casting method under ultrasound irradiation. Thermal and mechanical performances were also evaluated for all ultrasonically synthesized nanocomposites and the results indicated that thermal and mechanical stability are dramatically enhanced by addition of a small amount of modified CC-ATS within PVA up to 5wt% and higher amounts has low effect on the composite properties. The result of oxygen gas permeability of PVA showed a 25.44% reduction by adding of 5wt% of CC-ATS into polymer matrix. Experimental adsorption isotherm data indicated that PVA NC has more efficiency for Cu(II) adsorption relative to pure PVA and well simulated by Langmuir model with maximum adsorption capacity of 45.45mgg^-1. Moreover, study of sorption kinetic indicated that the solute adsorption on PVA/CC-ATS NC 5wt% was well modeled using the pseudo-second-order.

Ultrasonic-assisted synthesis of polyvinyl alcohol/phytic acid polymer film and its thermal stability, mechanical properties and surface resistivity

In this paper, polyvinyl alcohol/phytic acid polymer (PVA/PA polymer) was synthesized through esterification reaction of PVA and PA in the case of acidity and ultrasound irradiation and characterized, and PVA/PA polymer film was prepared by PVA/PA polymer and characterized, and the influence of dosage of PA on the thermal stability, mechanical properties and surface resistivity of PVA/PA polymer film were researched, and the influence of sonication time on the mechanical properties of PVA/PA polymer film was investigated. Based on those, it was concluded that the hydroxyl group on the chain of PVA and the phosphonic group on PA were connected together in the form of phosphonate bond, and the hydroxyl group on the chain of PVA were connected together in the form of ether bond after the intermolecular dehydration; in the meantime, it was also confirmed that PVA/PA polymer film prepared from 1.20mL of PA not only had the high thermal stability and favorable ductility but also the low surface resistivity in comparison with PVA/PA polymer film with 0.00mL of PA, and the ductility of PVA/PA polymer film was very sensitive to the sonication time.

Ultrasonic assisted synthesis of nanocomposite materials based on resole resin and surface modified nano CeO2: Chemical and morphological aspects

In this study, phenol-formaldehyde (PF)/CeO₂ nanocomposites (NC)s were prepared by in-situ polymerization of phenol and formaldehyde in alkali solution in the presence of surface modified CeO₂ nanoparticles (NP)s by sonochemical assisted synthesis. The morphology and structure of PF/CeO₂ NCs were characterized by using fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and thermal analyses methods. It was found that due to the good dispersion of surface modified NPs in polymer matrix and the strong interfacial interaction between the CeO₂ NPs and PF matrix, the thermal stability and thermo-mechanical properties of the PF/CeO₂ NCs were greatly enhanced. FE-SEM and AFM analyses showed the uniform distribution of CeO₂ NPs in PF matrix. The XRD patterns of NCs show the presence of crystalline CeO₂ NPs in amorphous matrix. The thermal analysis results reveal that, with increases in the content of CeO₂ NPs in PF matrix, the thermally stability factors of samples were drastically enhanced.