A simple approach for the sonochemical synthesis of Fe3O4-guargum nanocomposite and its catalytic reduction of p-nitroaniline

Electron Beam-Supported Fabrication of Biocompatible Silver/iota-Carrageenan for Wound Healing Application

Silver nanoparticles (AgNPs) are a potent antibacterial agent, especially when used to treat bacteria that are multidrug resistant. However, it is challenging to eliminate the hazardous reducing agents that remain in AgNPs produced by the conventional chemical reduction process. To overcome these challenges, the presented research demonstrates the fabrication of AgNPs using iota-carrageenan (ι-carra) as a carbohydrate polymer using electron beam (EB) irradiation. Well-characterized ι-carra@AgNPs have a face-centered cubic (FCC) structure with spherical morphology and an average size of 26 nm. Herein we explored the approach for fabricating ι-carra@AgNPs that is suitable for scaling up the production of nanoparticles that exhibit excellent water stability. Further, the optimized ι-carra@AgNPs exhibited considerable antibacterial activity of 40% and 30% inhibition when tested with Gram-negative Escherichia coli ATCC 43895 and Gram-positive Staphylococcus aureus (S. aureus) (ATCC 6538), respectively, and low cytotoxicity at 10-50 μg/mL. To establish the potential biomedical application, as proof of the concept, the ι-carra@AgNPs showed significant antibiofilm activity at 20 μg/mL and also showed 95% wound healing abilities at 50 μg/mL compared to the nontreated control groups. Electron beam assisted ι-carra@AgNPs showed significant beneficial effects against specific bacterial strains and may provide a guide for the development of new antibacterial materials for wound dressing for large-scale production for biomedical applications.

Exploring the prebiotic potential of hydrolyzed fucoidan fermented in vitro with human fecal inocula: Impact on microbiota and metabolome

Fucoidan is widely applied in food and pharmaceutical industry for the promising bioactivities. Low-molecular weight hydrolyzed fucoidan has gained attention for its beneficial health effects. Here, the modulation on microbiome and metabolome features of fucoidan and its acidolyzed derivatives (HMAF, 1.5-20 kDa; LMAF, <1.5 kDa) were investigated through human fecal cultures. Fucose is the main monosaccharide component in fucoidan and LMAF, while HMAF contains abundant glucuronic acid. LMAF fermentation resulted in the highest production of short-chain fatty acids, with acetate and propionate reaching maximum levels of 13.46 mmol/L and 11.57 mmol/L, respectively. Conversely, HMAF exhibited a maximum butyrate production of 9.28 mmol/L. Both fucoidan and acidolyzed derivatives decreased the abundance of Escherichia-Shigella and Klebsiella in human fecal cultures. Fucoidan and HMAF prefer to improve the abundance of Bacteroides. However, LMAF showed positive influence on Bifidobacterium, Lactobacillus, and Megamonas. Untargeted metabolome indicated that fucoidan and its derivatives mainly altered the metabolic level of lipids, indole, and their derivatives, with fucoidan and HMAF promoting higher level of indole-3-propionic acid and indole-3-carboxaldehyde compared to LMAF. Considering the chemical structural differences, this study suggested that hydrolyzed fucoidan can provide potential therapeutic applications for targeted regulation of microbial communities.

Synthesis and characterization of novel guar gum based waste material derived nanocomposite for effective removal of hexabromocyclododecane and lindane

Herein, efficient degradation of hexabromocyclododecane (HBCD) and Lindane, a persistent organic pollutant using guar gum based calcium oxide doped silicon dioxide (GG-CaO@SiO2) has been reported. The nanocomposite was prepared by waste egg shell (CaO) and rice husk (SiO2) was well characterized. The maximum degradation of HBCD and Lindane were observed at 8 mg catalyst loading, neutral pH, and 2 mg L-1 of pollutant amount. The photocatalytic performance of GG-CaO@SiO2 for HBCD and Lindane photodegradation was evaluated, and it was found that the rate constant increased in the order of GG-CaO@SiO2 > CaO@SiO2 > GG. The polymeric GG-CaO@SiO2 nanocomposite showed maximum removal of both pollutants due to higher surface area (70 m2 g-1) and synergistic interactions among GG moieties. It achieved HBCD and Lindane elimination rates of 94 % and 90 % by photo-adsorptive degradation within 150 min. Meanwhile, the leaching of HBCD from expanded polystyrene (EPS) materials (0.14 ± 0.05 ppm) underwater with different time intervals and degradation of leachate HBCD were also assessed. The eradication of the pollutant manifested first-order kinetics, with the Langmuir adsorption. LC-MS analysis confirmed that GG-CaO@SiO2 effectively breaks down complex structure toxic pollutants into safer metabolites under natural sunlight exposure. The polymeric GG-CaO@SiO2 nanocomposite showed notable reusability up to ten cycle promotes sustainability.

Degradation of reactive red 198 dye from aqueous solutions by combined technology advanced sonofenton with zero valent iron: Characteristics/ effect of parameters/kinetic studies

Dyes are one of the most common contaminants in industrial effluents, whose continuous release into the environment has become an increasing global concern. In this work, nanoparticles of zero-valent iron (NZVI) were synthesized using the chemical regeneration method ،and were utilized for the first time as a catalyst in the advanced Sono-Nano-Fenton hybrid method for the decomposition of Reactive Red 198 (RR198). The properties of zero-valent iron nanoparticles were analyzed using SEM and XRD. The effect of pH, initial dye concentration, nanoparticle dosage, zero-valent iron and H2O2 concentration on the decomposition efficiency of Red Reactive 198 was investigated. Comparing the efficiency of Reactivate 198 dye degradation in Sonolysis, Sono-NZVI, Sono-H2O2 and Sono-Nano Fenton processes showed that 97 % efficiency was achieved by the Sono-Nano Fenton process in 60 min. The kinetics of the removal process showed that this process follows pseudo-first-order kinetics and the Langmuir-Hinshelwood model. The results indicate that the effectiveness of the ultrasonic process in removing resistant organic pollutants such as dyes increases tremendously with the synergy of the Fenton process.

Sonochemical Synthesis of Magnetite/Poly(lactic acid) Nanocomposites

Nanocomposites based on poly(lactic acid) (PLA) and magnetite nanoparticles (MNP-Fe3O4) show promise for applications in biomedical treatments. One key challenge is to improve the stabilization and dispersion of MNP-Fe3O4. To address this, we synthesized MNP-Fe3O4/PLA nanocomposites using ultrasound mediation and a single iron(II) precursor, eliminating the need for surfactants or organic solvents, and conducted the process under ambient conditions. The resulting materials, containing 18 and 33 wt.% Fe3O4, exhibited unique thermal behavior characterized by two mass losses: one at a lower degradation temperature (Td) and another at a higher Td compared to pure PLA. This suggests that the interaction between PLA and MNP-Fe3O4 occurs through hydrogen bonds, enhancing the thermal stability of a portion of the polymer. Fourier Transform Infrared (FT-IR) analysis supported this finding, revealing shifts in bands related to the terminal -OH groups of the polymer and the Fe-O bonds, thereby confirming the interaction between the groups. Raman spectroscopy demonstrated that the PLA serves as a protective layer against the oxidation of MNP-Fe3O4 in the 18% MNP-Fe3O4/PLA nanocomposite when exposed to a high-power laser (90 mW). Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM) analyses confirmed that the synthetic procedure yields materials with dispersed nanoparticles within the PLA matrix without the need for additional reactants.

Properties of galactomannans and their textile-related applications-A concise review

Galactomannans are reserve carbohydrates in legume plants and are primarily extracted from their seeds. They contain galactose side chains throughout the mannose backbone and have unique features such as emulsifying, thickening, and gelling together with biodegradability, biocompatibility, and non-toxicity, which make them an appealing material. Guar gum and locust bean gum mainly are used in all galactomannan needed applications. Nonetheless, tara gum and fenugreek gum have also attracted considerable attention in recent decades. Despite the increased usage of galactomannans in the textile-related fields in recent years, there is no review article published yet. To fill this gap and to demonstrate the striking and increasing importance of galactomannans, a concise summary of the properties of common galactomannans and their comparisons is given first, followed by an account of recent developments and applications of galactomannans in the textile-related fields. The associated potential opportunities are also provided at the end of this review.

Environment-friendly degradable zinc-ion battery based on guar gum-cellulose aerogel electrolyte

With the vigorous development of electronics and the increasingly prominent problem of environmental pollution, it is particularly important to exploit environmentally friendly electronic devices. Transient electronics represent a kind of device that once the specified functions have completed can completely or partially disappear through physical or chemical actions. In this work, we introduce a novel guar gum-cellulose aerogel (GCA) membrane based on natural biomaterials and successfully use it as an electrolyte film to fabricate a degradable zinc-ion battery (DZIB). All components of the prepared DZIBs can be successfully degraded or disintegrate in phosphate-buffered saline (PBS) containing a solution of proteinase K after approximately 40 days. This electrolyte film has a high ionic conductivity of approximately 4.73 × 10^-2 S cm^-1 and a good mechanical stress property. When applied to DZIB, the production of zinc dendrites can be restrained, leading to the battery showing excellent electrochemical performance. The battery exhibits a specific capacity of 309.1 mA h g^-1 at a current density of 308 mA g^-1 after 100 cycles and a steady cycling ability (100% capacity retention after 200 cycles). More importantly, the electrochemical performance of DZIB is better than that of transient batteries reported in the past, taking a solid step in the field of transient electronics in the initial stage.

Sunlight-induced photocatalytic degradation of various dyes and bacterial inactivation using CuO-MgO-ZnO nanocomposite

Novel tri-phase CuO-MgO-ZnO nanocomposite was prepared using the co-precipitation technique and investigated its physical properties using characterization techniques including XRD, FTIR, Raman, IV, UV-vis, PL, and SEM. The application of grown CuO-MgO-ZnO nanocomposite for the degradation of various dyes under sunlight and antibacterial activity against different bacteria were studied. The XRD confirmed the existence of diffraction peaks related to CuO (monoclinic), MgO (cubic), and ZnO (hexagonal) with CuO phase 40%, MgO 24%, and ZnO 36%. The optical energy gap of nanocomposite was 2.9 eV, which made it an efficient catalyst under sunlight. Raman and FTIR spectra have further confirmed the formation of the nanocomposite. SEM images revealed agglomerated rod-shaped morphology. EDX results showed the atomic percentage of a constituent element in this order Cu>Zn>Mg. PL results demonstrate the presence of intrinsic defects. The photocatalytic activity against methylene blue (MB), methyl orange (MO), rhodamine-B (RhB), cresol red (CR), and P-nitroaniline (P-Nitro) dyes has shown the excellent degradation efficiencies 88.5%, 93.5%, 75.9%, 98.8%, and 98.6% at 5 ppm dye concentration and 82.6%, 83.6%, 64.3%, 93.1%, and 94.3% at 10 ppm dye concentration in 100 min, respectively, under sunlight illumination. The higher degradation is due to the generation of superoxide and hydroxyl radicals. The recyclability test showed the reusability of catalyst up to the 5th cycle. The antibacterial activity against Escherichia coli, Klebsiella pneumoniae, Proteus Vulgaris, Staphylococcus aureus, and Pseudomonas aeruginosa bacteria with the zone of inhibition 30, 31, 30, 30, and 30 mm, respectively, was achieved.

Subcritical and supercritical water oxidation for dye decomposition

The total annual output of synthetic dyes exceeds 7 × 10⁵ tons. About 1,000 tons of non-biodegradable synthetic dyes are released every year into the natural streams and water sources from textile wastes. The release of these colored wastewater exerts negative impact on aquatic ecology and human beings because of the poisonous and carcinogenic repercussions of dyes involved in coloration production. Therefore, with a growing interest in the environment, efficient technologies need to be developed to eliminate dyes from local and industrial wastewater. Supercritical water oxidation as a promising wastewater treatment technology has many advantages, such as a rapid reaction and pollution-free products. However, due to corrosion, salt precipitation and operational problems, supercritical water oxidation process did not gain expected industrial development. These technical difficulties can be overcome by application of non-corrosive subcritical water as a reaction medium. This work summarizes the negative impacts of dyes and role of subcritical and supercritical water and their efficiencies in dye oxidation processes.

Sonosynthesis and characterization of konjac gum/xanthan gum supported ironoxide nanoparticles

In this study, an optimized method was developed for the synthesis of biological macromolecule blend supported iron oxide nanoparticles (IO NPs). The nanostructure was composed of binary polymer blends of konjac gum (KG) and xanthan gum (XG). The synthesized KG/XG@IO NPs were characterized by SEM, EDX, HRTEM, FTIR, XRD, XPS, zeta potential, DLS, TGA, and DSC. According to results, the KG/XG@IO NPs had a spherical shape with an average diameter range of ~40 nm using Scherrer's equation and Williamson-Hall equation. The results of TGA and DSC analysis confirmed that the KG/XG@IO NPs maintained good thermal stability. Our motivation was to determine the effect of the biopolymer blend matrix on the morphology, size, stability, and thermal properties of the green KG/XG@IO NPs. Furthermore, the effects of sonication process time (10-30 min), mass ratio of biological macromolecule blend (KG/XG) (1:1, 1:2, and 1:4), and amplitude frequency (5%-40%) on the rheological parameters of NPs were investigated to optimize the sonochemical process. From optimization analysis, we concluded that the sonication had a role in the size distribution and the formation of nanoparticles with the optimum mixture ratio of binary biopolymer matrix as it provided long-term stability.

Flowability of Gel-Matrix and Magnetorheological Response for Carrageenan Magnetic Hydrogels

The relationship between rheological features in the absence of a magnetic field and magnetic response was investigated for κ-carrageenan magnetic hydrogels containing carbonyl iron particles. The concentration of carrageenan was varied from 1.0 to 5.0 wt%, while the concentration of carbonyl iron was kept at 70 wt%. The magnetic response revealed that the change in storage modulus ΔG' decreased inversely proportional to the carrageenan concentration. A characteristic strain γ1 where G' equals to G″ was seen in a strain range of 10-3. It was found that ΔG' was inversely proportional to the characteristic stress at γ1. Another characteristic strain γ2 where the loss tangent significantly increased was also analyzed. Similar to the behavior of γ1, ΔG' was inversely proportional to γ2. The characteristic stresses at γ1 and γ2 were distributed at 80-720 Pa and 40-310 Pa, respectively. It was revealed that a giant magnetorheology higher than 1 MPa can be observed when the characteristic stresses at γ1 and γ2 are below approximately 240 Pa and 110 Pa, respectively.

Recent Advances in Inorganic Nanomaterials Synthesis Using Sonochemistry: A Comprehensive Review on Iron Oxide, Gold and Iron Oxide Coated Gold Nanoparticles

Sonochemistry uses ultrasound to improve or modify chemical reactions. Sonochemistry occurs when the ultrasound causes chemical effects on the reaction system, such as the formation of free radicals, that intensify the reaction. Many studies have investigated the synthesis of nanomaterials by the sonochemical method, but there is still very limited information on the detailed characterization of these physicochemical and morphological nanoparticles. In this comprehensive review, recent advances in the sonochemical synthesis of nanomaterials based on iron oxide nanoparticles (Fe3O4NP), gold nanoparticles (AuNP) and iron oxide-coated gold nanoparticles (Fe3O4@Au NP) are discussed. These materials are the most studied materials for various applications, such as medical and commercial uses. This review will: (1) address the simple processing and observations on the principles of sonochemistry as a starting point for understanding the fundamental mechanisms, (2) summarize and review the most relevant publications and (3) describe the typical shape of the products provided in sonochemistry. All in all, this review's main outcome will provide a comprehensive overview of the available literature knowledge that promotes and encourages future sonochemical work.

Bi metal/oxygen-deficient BiO2-x with tetrahedral morphology and high photocatalytic activity

Vacancy-rich materials with high photocatalytic activity are of great interest for pollutants removal and play a significant role in green chemistry. Herein, we successfully synthesized Bi/BiO_2-x composite through hydrothermal route. In this case, the surface plasmon resonance effect of Bi and oxygen vacancies of BiO_2-x collectively increase the removal rate of pollutants. More importantly, the Bi/BiO_2-x composites have enhanced activity in the degradation of RhB, MO, BPA and CIP, and the reduction of Cr(VI) and PNA. Besides, an enhanced photocatalytic activity is due to the main reactive species of ·[Formula: see text] and h⁺ that is confirmed by trapping experiments and ESR analyses. The electronic structure and visible light harvesting of photocatalysts were measured and also theoretically calculated by using density functional theory and finite difference time domain calculations, DRS, VB x-ray photoelectron spectroscopy and Mott-Schottky plots, which allowed to propose a possible photocatalytic mechanism for the degradation process.

Fe3O4 coated guargum nanoparticles as non-genotoxic materials for biological application

The current study aims to check various behavioural, developmental, cytotoxic, and genotoxic effects of Fe₃O₄-GG nanocomposite (GGNCs) on Drosophila melanogaster. Fe₃O₄ nanoparticles were prepared by the chemical co-precipitation method and cross-linked with guargum nanoparticles to prepare the nanocomposites. The nanocomposites were characterized by using transmission electron microscopy (TEM), X-ray diffraction (XRD), and FTIR techniques. To investigate the biomolecular interaction, GGNCs was further tagged with Fluorescein isothiocyanate. Various concentrations of nanocomposites were mixed with the food and flies were allowed to complete the life cycle. The life cycle of the flies was studied as a function of various concentrations of GGNCs. The 1st instar larvae after hatching from the egg start eating the food mixed with GGNCs. The 3rd instar larvae were investigated for various behavioural and morphological abnormalities within the gut. The 3rd instar larva has defective crawling speed, crawling path, and more number of micronuclei within the gut. Similarly, in adult flies thermal sensitivity, climbing behaviour was found to be altered. In adult flies, a significant reduction in body weight was found which is further correlated with variation of protein, carbohydrate, triglyceride, and antioxidant enzymes. Altogether, the current study suggests GGNCs as a non-genotoxic nanoparticle for various biological applications.

Simple Sonochemical Method to Optimize the Heating Efficiency of Magnetic Nanoparticles for Magnetic Fluid Hyperthermia

We developed a fast, single-step sonochemical strategy for the green manufacturing of magnetite (Fe₃O₄) magnetic nanoparticles (MNPs), using iron sulfate (FeSO₄) as the sole source of iron and sodium hydroxide (Na(OH)) as the reducing agent in an aqueous medium. The designed methodology reduces the environmental impact of toxic chemical compounds and minimizes the infrastructure requirements and reaction times down to minutes. The Na(OH) concentration has been varied to optimize the final size and magnetic properties of the MNPs and to minimize the amount of corrosive byproducts of the reaction. The change in the starting FeSO₄ concentration (from 5.4 to 43.1 mM) changed the particle sizes from (20 ± 3) to (58 ± 8) nm. These magnetite MNPs are promising for biomedical applications due to their negative surface charge, good heating properties (≈324 ± 2 W/g), and low cytotoxic effects. These results indicate the potential of this controlled, easy, and rapid ultrasonic irradiation method to prepare nanomaterials with enhanced properties and good potential for use as magnetic hyperthermia agents.

Facile sonochemical synthesis of Ag2O-guar gum nanocomposite as a visible light photocatalyst for the organic transformation reactions

Silver Oxide (Ag₂O)-Guar gum nanocomposite was fabricated via a simple sonochemical co-precipitation method. The obtained photocatalyst was characterized with various techniques such as X-ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, scanning electron microscopy and transmission electron microscopy along with energy dispersion X-ray spectroscopy. The findings have demonstrated that Ag₂O nanoparticles are spherical of 5-20 nm and were dispersed on the surface of polysaccharide guar gum to form Ag₂O-guar gum nanocomposite. The as-synthesized nanocomposite was enacted as a competent photocatalyst for the reduction of nitrobenzene and oxidation of benzyl alchohol. The conversion efficiency for the reduction of nitrobenzene was 96 % with the addition of sodium borohydride, and the conversion of benzyl alcohol was 98 %. The highly efficient photocatalytic activity was due to the exceedingly dispersed Ag₂O-guar gum nanocomposite where effective separation rate of energy driven electron-hole pairs and stronger light absorption occurs. The possible mechanism of the reactions was implicated in understanding the active species involved in the photocatalytic study.

Synthesis and characterization of a novel magnetic calcium-rich nanocomposite and its remediation behaviour for As(III) and Pb(II) co-contamination in aqueous systems

Herein, a novel magnetic calcium-rich biochar (MCRB), prepared by loading Fe₃O₄ nanoparticles (Fe₃O₄ NPs) on crab shell-derived biochar, was studied for remediation of arsenic and lead co-contamination. Characteristics of the MCRB demonstrated that Fe₃O₄ NPs adhered on the biochar matrix uniformly. Batch experiments on the effects of pH, contact time and initial concentrations revealed that for both metals, removal by the MCRB was pH-dependent with an optimal pH of 6, and that the MCRB had a strong ability for removing arsenic and lead with maximum removal capacities of 15.8 and 62.4 mg g^-1, respectively. The mechanisms of the simultaneous removal of arsenic and lead involved both competitive and synergistic effects. The As(III) addition enhanced Pb(II) removal by 5.4-18.8%, while the presence of Pb(II) suppressed As(III) removal by 5.8-17.8%. Competitive complexation of the two metals with biochar was responsible for the suppression, while the enhancement was due mainly to the formation of the Pb(II)-As(III)-FeO ternary surface complex with As(III) as the bridging molecule. These new insights can further our understanding of the application of MCRB as a potential material for use in the treatment of arsenic and lead co-contamination.

Sonication-assisted synthesis of a new heterostructured schiff base ligand Silver-Guar gum encapsulated nanocomposite as a visible light photocatalyst

A heterostructured Schiff base ligand (Benzildiethylenetriamine)-Silver-Guar gum encapsulated nanocomposites was intended to prepare by simple sonication assisted reflux method. Appropriate composition of purified guar gum, Schiff base ligand and silver nitrate were used for the synthesis. The synthesised nanocomposites were characterised by photoluminescence spectrum, UV-vis diffuse reflectance spectrophotometer, Fourier transform infra-red spectroscopy, X-ray diffractometer, scanning electron microscopy and transmission electron microscopy. The crystalline peaks of XRD and FTIR reveals that Schiff base ligand and guar gum forms metal-organic matrix. Morphology studies have confirmed the organic framework structure and metallic silver nanoparticles are embedded on the organic framework. The efficiency of nanocomposites depends on adsorption capacity and silver nanoparticles that are encapsulated thereby increasing the visible light absorption through surface plasma resonance. The nanocomposite was proved to be highly selective in hydrogenation reaction which favoured the formation of aniline from nitrobenzene as single product with short reaction time and 90% conversion.

Particle Size in Secondary Particle and Magnetic Response for Carrageenan Magnetic Hydrogels

The relation between the number of magnetic particles and the change in storage modulus induced by a magnetic field was investigated for weak hydrogels containing carbonyl iron, iron oxide, and barium ferrite particles with different diameters in primary particles while maintaining the magnetization of magnetic particles. The change in storage modulus exhibited a power dependency against the number of magnetic particles, which was nearly independent of the magnetic particles. The change in storage modulus was successfully scaled by the reduced number of magnetic particles using the diameter of secondary particles. Microphotographs revealed that iron oxide and barium ferrite particles form aggregations while carbonyl iron particles are well dispersed in carrageenan gels. The diameter of secondary particles determined by a relation between the change in storage modulus and the reduced number of magnetic particles showed similar values with those observed in microphotographs.

Catalytic Oxidation Process for the Degradation of Synthetic Dyes: An Overview

Dyes are used in various industries as coloring agents. The discharge of dyes, specifically synthetic dyes, in wastewater represents a serious environmental problem and causes public health concerns. The implementation of regulations for wastewater discharge has forced research towards either the development of new processes or the improvement of available techniques to attain efficient degradation of dyes. Catalytic oxidation is one of the advanced oxidation processes (AOPs), based on the active radicals produced during the reaction in the presence of a catalyst. This paper reviews the problems of dyes and hydroxyl radical-based oxidation processes, including Fenton's process, non-iron metal catalysts, and the application of thin metal catalyst-coated tubular reactors in detail. In addition, the sulfate radical-based catalytic oxidation technique has also been described. This study also includes the effects of various operating parameters such as pH, temperature, the concentration of the oxidant, the initial concentration of dyes, and reaction time on the catalytic decomposition of dyes. Moreover, this paper analyzes the recent studies on catalytic oxidation processes. From the present study, it can be concluded that catalytic oxidation processes are very active and environmentally friendly methods for dye removal.

Ultrasound-assisted impregnation for high temperature Fischer-Tropsch catalysts

A fraction of the petroleum extracted from oil reservoirs contains associated natural gas. Rather than building infrastructure to recover low volumes of this natural gas, the industry flares or vents it to the atmosphere, which contributes to atmospheric greenhouse gas emissions but also reduces the air quality locally because it contains gaseous sulphur and nitrogen compounds. Converting the natural gas (NG) to hydrocarbons with a small-scale two-step gas-to-liquids process, is an alternative to flaring and venting. In the first step, NG reacts with oxygen to form syngas (Catalytic Partial Oxidation) and in the second step the syngas reacts over metallic catalysts to form higher paraffins at 210 °C to 300 °C-Fischer Tropsch synthesis (FT). For the first time, we synthesize bimetallic FeCo FT catalysts with ultrasound. An ultrasonic horn agitates the solution during the entire impregnation process. The active phase dispersion of the sonicated catalysts was superior to the catalyst synthesized without ultrasound, while reducing the impregnation time by a factor of three. We tested our catalysts in a lab-scale, fixed-bed reactor at 270 °C and 300 °C, and achieved 80% conversion over 3-days on stream and a 40% yield of C₂₊.

Guar gum and its composites as potential materials for diverse applications: A review

Naturally occurring polymers are currently of prime importance among which polysaccharides occupies superior position due to their easy availability, eco- friendly and non-toxic nature. Guar gum, one of the naturally occurring polymer, is a galactomannan acquired by ground endosperm of Cyamopsis tetragonolobus or Cyamopsis psoraloides. It belongs to the family leguminosae. Presence of large number of hydroxyl groups increases its H- bonding ability when dissolved in water that enhance the viscosity and gelling properties of the guar gum solution. Based upon these properties, guar gum is used in several industries such as textile, food, petrochemical, mining and paper for varied applications. It is used as suspending, emulsifying, gelling and stabilising agent in the conventional dosage forms. Last few decades have marked the increase in development of various composites of guar gum that have intrinsic utilization in various fields. Immobilization of guar gum with the others not only enhances its properties but also enriches its utilization in numerous fields for diverse applications such as water purification, drug delivery, pharmaceutical, cosmetic and food industries, etc. Guar gum derivatives are found to have therapeutic importance in certain physiological disorders also. In this review article, we have summarized various possible composites of guar gum and their most probable applications in different fields.

Ultra-fast and highly efficient removal of cadmium ions by magnetic layered double hydroxide/guargum bionanocomposites

Finding effective methodologies for the removal of heavy metals from contaminated water are really significant. Facile and "green" techniques for adsorbents fabrication are in high demand to satisfy a wide range of practical applications. This report presents of an efficient method for preparing Fe₃O₄@ layered double hydroxide@ guargum bionanocomposites (GLF-BNCs). First of all, the LDH coated Fe₃O₄ nanoparticles were simply synthesized, using ultrasonic irradiation. The citrate coated Fe₃O₄ nanoparticles which were under negative charging and LDH nanocrystals which were charged positively make electrostatic interaction which formed a stable self-assembly component, and then guargum as a biopolymer were linked onto Fe₃O₄@LDH via an in situ growth method. Furthermore, the GLF-BNCs had the ability to remove cadmium ions (Cd²⁺) from the aqueous solutions. Adsorption studies indicate that the Langmuir isotherm model and the kinetic model in pseudo-second order were appropriate for Cd(II) removal. The maximum Cd(II) adsorption capacity of the GLF8% was 258 mg g^-1. The Cd(II) was adsorbed from aqueous solutions very quickly with the contact time of 5 min by the GLF 8%, suggesting that GLF-BNCs may be a promising adsorbent for removing Cd(II) from wastewater. The effect of Fe₃O₄@LDH contents (2, 4 and 8 wt.%) on the thermal, physicomechanical, and morphological properties of guargum were investigated by Fourier transform infrared spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), field emission scanning electron microscopy, transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy and Brunauer-Emmett-Teller (BET) specific surface area techniques. The TEM results indicated that the LDH platelets are distributed within the polymer matrix.