Degradation of Tetrabromobisphenol S by thermo-activated Persulphate Oxidation: reaction Kinetics, transformation Mechanisms, and brominated By-products

Brominated flame retardants (BFRs) are a group of contaminants of emerging environmental concern. In this study, systematic exploration was carried out to investigate the degradation of tetrabromobisphenol S (TBBPS), a typical emerging BFRs, by thermally activated persulfate (PDS) oxidation. The removal of 5.0 μM TBBPS was 100% after 60 min oxidation treatment under 60°C. Increasing the temperature or initial PDS concentration facilitated the degradation efficiency of TBBPS. The quenching test indicated that TBBPS degradation occurred via the attack of both sulphate radicals and hydroxyl radicals. Natural organic matter (NOM) decreased the removal rate, however, complete disappearance of TBBPS could still be obtained. Six intermediate products were formed during reactions between TBBPS and radicals. Transformation pathways including debromination, β-Scission, and cross-coupling were proposed. Brominated disinfection by-products (DBPs) in situ formed during the degradation of TBBPS were also investigated, such as bromoform and dibromoacetic acid. The presence of NOM reduced the formation rates of brominated DBPs. Results reveal that although thermo-activated PDS is a promising method for TBBPS-contaminated water, it can lead to potential brominated DBPs risks, which should be paid more attention to when SO4•--based oxidation technology is applied.

Catalytic Oxidation Process for the Degradation of Synthetic Dyes: An Overview

Dyes are used in various industries as coloring agents. The discharge of dyes, specifically synthetic dyes, in wastewater represents a serious environmental problem and causes public health concerns. The implementation of regulations for wastewater discharge has forced research towards either the development of new processes or the improvement of available techniques to attain efficient degradation of dyes. Catalytic oxidation is one of the advanced oxidation processes (AOPs), based on the active radicals produced during the reaction in the presence of a catalyst. This paper reviews the problems of dyes and hydroxyl radical-based oxidation processes, including Fenton's process, non-iron metal catalysts, and the application of thin metal catalyst-coated tubular reactors in detail. In addition, the sulfate radical-based catalytic oxidation technique has also been described. This study also includes the effects of various operating parameters such as pH, temperature, the concentration of the oxidant, the initial concentration of dyes, and reaction time on the catalytic decomposition of dyes. Moreover, this paper analyzes the recent studies on catalytic oxidation processes. From the present study, it can be concluded that catalytic oxidation processes are very active and environmentally friendly methods for dye removal.

Ferrous ion-activated persulphate process for landfill leachate treatment: removal of organic load, phenolic micropollutants and nitrogen

The innovative [Formula: see text] treatment technology based on sulphate radicals induced oxidation was applied for the treatment of landfill leachate. The performance of chemical oxygen demand (COD) and dissolved organic carbon (DOC) removal in the Fe²⁺-activated persulphate system was moderate; however, the results of dissolved nitrogen (DN) and total phenols removal showed significant efficacy (≤39% and ≥87%, respectively). [Formula: see text] addition to the [Formula: see text] system enhanced the treatment efficacy and resulted in supplementary 15% of COD and 5% of DN removal. Hydroxyl radical-based H₂O₂/Fe²⁺ treatment of the landfill leachate was performed as well; the results indicated higher removal efficacy of COD and DOC compared to the [Formula: see text] system. However, practical application of the H₂O₂/Fe²⁺ system is considerably influenced by temperature rise and excessive foam formation. Generally, the ferrous ion-activated persulphate treatment could be a promising technology for ex situ as well as in situ landfill leachate treatment applications.

Treatment of high-strength wastewater by Fe(2+)-activated persulphate and hydrogen peroxide

Ferrous ion-activated persulphate and hydrogen peroxide were studied for the treatment of real high-strength industrial effluent. The Fenton process demonstrated greater organic load removal, biodegradability improvement and toxicity reduction as well as lower treatment cost than the activated persulphate system. However, the use of an activated persulphate process was more favourable due to the exothermic effect intrinsic to the Fenton reaction, which resulted in a rapid increase in the temperature of the high-strength wastewater along with excessive foam formation. Overall, for the H2O2/Fe(2+) and [Formula: see text] processes, the application of a chemical oxygen demand (COD)/oxidant/Fe(2+) weight ratio of 1/0.4/0.075 resulted in a COD removal of 58 and 50%, a 7-day biochemical oxygen demand/COD ratio increase from 0.14 to 0.3 and 0.23, and an increase in the EC50 (Daphnia magna) by 6.5-fold and 2.9-fold, respectively. The stepwise addition of the oxidant and activator was favourable for the Fenton process and resulted in negligible improvement in the wastewater treatment efficacy in the activated persulphate system.

Degradation of toluene-2,4-diamine by persulphate: kinetics, intermediates and degradation pathway

In this study, the degradation of toluene-2,4-diamine (TDA) by persulphate (PS) in an aqueous solution at near-neutral pH was examined. The result showed that the degradation rate of TDA increased with increasing PS concentrations. The optimal dosage of PS in the reaction system was determined by efficiency indicator (I) coupling in the consumption of PS and decay half-life of TDA. Calculation showed that 0.74 mM of PS was the most effective dosage for TDA degradation, at that level the maximum I of 24.51 was obtained. PS can oxidize TDA for an extended reaction time period. Under neutral condition without activation, four degradation intermediates, 2,4-diamino-3-hydroxy-5-sulfonicacidtoluene, 2,4-diaminobenzaldehyde, 2,4-bis(vinylamino)benzaldehyde and 3,5-diamino-4-hydroxy-2-pentene, were identified by high-performance liquid chromatography-mass spectrometry. The tentative degradation pathway of TDA was proposed as well. It was found that hydroxyl radical played an important role in degradation of TDA with the activation of Fe2+, whereas PS anion and sulphate radicals were responsible for the degradation without activation of Fe2+.