Shock wave emission and cavitation bubble dynamics by femtosecond optical breakdown in polymer solutions

Investigating the potential of catheter-assisted pulsed focused ultrasound ablation for atherosclerotic plaques

BACKGROUND

Atherosclerosis is a condition in which an adhesive substance called plaque accumulates over time inside the arteries. Plaque buildup results in the constriction of arteries, causing a shortage of blood supply to tissues and organs. Removing atherosclerotic plaques controls the development of acute ischemic stroke and heart diseases. It remains imperative for positive patient outcomes.

PURPOSE

This study sought to develop a minimally invasive technique for removing arterial plaques by applying focused ultrasound (FUS) energy on the metal surface of a nitinol catheter wire to induce inertial cavitation. The induced cavitation can deplete plaque mechanically inside the arteries, leading towards improved recanalization of blood vessels.

METHODS

The enhanced cavitation effect induced by combining FUS with a metal catheter was first verified by exposing agar phantom gels with or without a 0.9-mm diameter nitinol wire to an acoustic field produced by a 0.5-MHz FUS transducer. The phenomenon was further confirmed in pork belly fat samples with or without a 3-mm diameter nitinol catheter wire. Cavitation was monitored by detecting the peaks of emitted ultrasound signals from the samples using a passive cavitation detector (PCD). Cavitation threshold values were determined by observing the jump in the peak amplitude of signals received by the PCD when the applied FUS peak negative pressure (PNP) increased. To simulate arterial plaque removal, FUS with or without a catheter was used to remove tissues from pork belly fat samples and the lipid cores of human atherosclerotic plaque samples using 2500-cycle FUS bursts at 10% duty cycle and a burst repetition rate of 20 Hz. Treatment outcomes were quantified by subtracting the weight of samples before treatment from the weight of samples after treatment. All measurements were repeated 5 times (n = 5) unless otherwise indicated, and paired t-tests were used to compare the means of two groups. A p-value of <0.05 will be considered significant.

RESULTS

Our results showed that with a nitinol wire, the cavitation threshold in agar phantoms was reduced to 2.6 MPa from 4.3 MPa PNP when there was no nitinol wire in the focal region of FUS. For pork belly fat samples, cavitation threshold values were 1.0 and 2.0 MPa PNP, with and without a catheter wire, respectively. Pork belly fat tissues and lipid cores of atherosclerotic plaques were depleted at the interface between a catheter and the samples at 2 and 4 MPa FUS PNP, respectively. The results showed that with a catheter wire in the focal region of a 3-min FUS treatment session, 24.7 and 25.6 mg of lipid tissues were removed from pork belly fat and human atherosclerotic samples, respectively. In contrast, the FUS-only group showed no reduction in sample weight. The differences between FUS-only and FUS-plus-catheter groups were statistically significant (p < 0.001 for the treatment on pork belly samples, and p < 0.01 for the treatment on human atherosclerotic samples).

CONCLUSION

This study demonstrated the feasibility of catheter-assisted FUS therapy for removing atherosclerotic plaques.

Experimental investigation on the characteristics of the shock wave emitted by the cavitation bubble near the air bubble

This study explores the mitigation of cavitation damage in hydraulic engineering through air entrainment. The primary aim is to experimentally analyze the shock wave characteristics emitted by cavitation bubbles adjacent to air bubbles affixed to a tube nozzle. The schlieren optical system is utilized to visualize the shock wave, while a hydrophone measures its pressure. Experiments are conducted on cavitation bubbles induced by the spark-generated method in the vicinity of air bubbles, varying the dimensionless distances and sizes of the air bubbles. The results indicate that (1) The introduction of an air bubble noticeably changes the morphology, kinematic behavior, and shock wave features of the cavitation bubble. (2) Four distinct shock wave patterns are identified based on the quantity and shape of the shock wave, with variations in the cavitation bubble's collapsing behavior and shock wave characteristics across different patterns. (3) The dimensionless distance γ and size δ exert significant influence on the shock wave's quantity, pressure peak, shape, and energy. With γ decreases or δ increases, the shock wave quantity increases while the shock wave intensity decreases. This investigation of the interaction between cavitation bubbles and air bubbles is essential for elucidating the mechanism through which air entrainment mitigates cavitation damage.

Advances in ultrasonic treatment of oily sludge: mechanisms, industrial applications, and integration with combined treatment technologies

In the petroleum sector, the generation of oily sludge is an unavoidable byproduct, necessitating the development of efficient treatment strategies for both economic gain and the mitigation of negative environmental impacts. The intricate composition of oily sludge poses a formidable challenge, as existing treatment methodologies frequently fall short of achieving baseline disposal criteria. The processes of demulsification and dehydration are integral to diminishing the oil content and reclaiming valuable crude oil, thereby playing a critical role in the management of oily sludge. Among the myriad of treatment solutions, ultrasonic technology has emerged as a particularly effective physical method, celebrated for its diverse applications and lack of resultant secondary pollution. This comprehensive review delves into the underlying mechanisms and recent progress in the ultrasonic treatment of oily sludge, with a specific focus on its industrial implementations within China. Both isolated ultrasonic treatment and its combination with other technological approaches have proven successful in addressing oily sludge challenges. The adoption of industrial-scale systems that amalgamate ultrasound with multi-technological processes has shown marked enhancements in treatment efficacy. The fusion of ultrasonic technology with other cutting-edge methods holds considerable potential across a spectrum of applications. To fulfill the goals of resource recovery, reduction, and neutralization in oily sludge management, the industrial adoption and adept application of a variety of treatment technologies are imperative.

Ultra-high-speed dynamics of acoustic droplet vaporization in soft biomaterials: Effects of viscoelasticity, frequency, and bulk boiling point

Phase-shift droplets are a highly adaptable platform for biomedical applications of ultrasound. The spatiotemporal response of phase-shift droplets to focused ultrasound above a certain pressure threshold, termed acoustic droplet vaporization (ADV), is influenced by intrinsic features (e.g., bulk boiling point) and extrinsic factors (e.g., driving frequency and surrounding media). A deep understanding of ADV dynamics is critical to ensure the robustness and repeatability of an ADV-assisted application. Here, we integrated ultra-high-speed imaging, at 10 million frames per second, and confocal microscopy for a full-scale (i.e., from nanoseconds to seconds) characterization of ADV. Experiments were conducted in fibrin-based hydrogels to mimic soft tissue environments. Effects of fibrin concentration (0.2 to 8 % (w/v)), excitation frequency (1, 2.5, and 9.4 MHz), and perfluorocarbon core (perfluoropentane, perfluorohexane, and perfluorooctane) on ADV dynamics were studied. Several fundamental parameters related to ADV dynamics, such as expansion ratio, expansion velocity, collapse radius, collapse time, radius of secondary rebound, resting radius, and equilibrium radius of the generated bubbles were extracted from the radius vs time curves. Diffusion-driven ADV-bubble growth was fit to a modified Epstein-Plesset equation, adding a material stress term, to estimate the growth rate. Our results indicated that ADV dynamics were significantly impacted by fibrin concentration, frequency, and perfluorocarbon liquid core. This is the first study to combine ultra-high-speed and confocal microscopy techniques to provide insights into ADV bubble dynamics in tissue-mimicking hydrogels.

A feasibility study on removing lipid deposition in atherosclerotic plaques with ultrasound-assisted laser ablation

Objective. Atherosclerosis is the buildup of fats, cholesterol, and other substances on the inner walls of arteries. It can affect arteries of heart, brain, arms, legs, pelvis and kidney, resulting in ischemic heart disease, carotid artery disease, peripheral artery disease and chronic kidney disease. Laser-based treatment techniques like laser atherectomy can be used to treat many common atherosclerostic diseases. However, the use of laser-based treatment remains limited due to the high risk of complications and low efficiency in removing atherosclerostic plaques as compared with other treatment methods. In this study, we developed a technology that used high intensity focused ultrasound to assist laser treatment in the removal of the lipid core of atherosclerotic plaques.Approach. The fundamental mechanism to disrupt atherosclerostic plaque was to enhance the mechanical effect of cavitation during laser/ultrasound therapy. To promote cavitation, spatiotemporally synchronized ultrasound bursts of 2% duty cycle at 0.5 MHz and nanosecond laser pulses at 532 nm wavelength were used. Experiments were first performed on pig belly fat samples to titrate ultrasound and laser parameters. Then, experiments were conducted on human plaque samples, where the lipid depositions of the plaques were targeted.Main results. Our results showed that fat tissue could be removed with an ultrasound peak negative pressure (PNP) of 2.45 MPa and a laser radiant exposure as low as 3.2 mJ mm^-2. The lipid depositions on the atherosclerostic plaques were removed with laser radiant exposure of 16 mJ mm^-2in synchronizing with an ultrasound PNP of 5.4 MPa. During all the experiments, laser-only and ultrasound-only control treatments at the same energy levels were not effective in removing the lipid.Significance. The results demonstrated that the addition of ultrasound could effectively reduce the needed laser power for atherosclerotic plaque removal, which will potentially improve treatment safety and efficiency of current laser therapies.

Microsecond cell triple-sorting enabled by multiple pulse irradiation of femtosecond laser

Femtosecond-laser-assisted cell manipulation, as one of the high throughput cell sorting techniques, is tailored for single-step multiple sorting based on controllable impulsive force. In this paper, femtosecond laser pulses are focused within a pocket structure and they induce an impulse force acting on the flowing objects. The impulsive force is shown to be controllable by a new method to adjust the femtosecond pulse properties. This allows precise streamline manipulation of objects having various physical qualities (e.g., weight and volume). The pulse energy, pulse number, and pulse interval of the femtosecond laser are altered to determine the impulsive force strength. The method is validated in single cell or bead triple-sorting experiments and its capability to perform streamline manipulation in as little as 10 μs is shown. The shift profiles of the beads acting under the impulsive force are studied in order to better understand the sorting mechanism. Additionally, beads and cells with different fluorescence intensities are successfully detected and directed into different microchannels, with maximum success rates of 90% and 64.5%, respectively. To sum up, all results suggest that this method has the potential to sort arbitrary subpopulations by altering the number of femtosecond pulses and that it takes the first step toward developing a single-step multi-selective system.

Near threshold nucleation and growth of cavitation bubbles generated with a picosecond laser

The nucleation and growth of cavitation bubbles few micrometers in size in water generated by a 60 ps 515 nm fiber laser is observed and visualized near nucleation threshold. The study is performed by monitoring the plasma size, the cavitation bubble size and the emitted shock waves. The latter two aspects are supported by the Gilmore model using a Noble-Abel-stiffened-gas (NASG) equations of state. For the first time, two types of cavitation events are identified and visualized that exhibit a difference of more than two orders of magnitude in the excitation energy converted to mechanical effects with minimal change in excitation laser pulse energy. The result is localized cavitation and reduced mechanical stress on water-based media with potentially positive implications for laser treatments of biological tissue.

Microcavitation dynamics in viscoelastic tissue during histotripsy process

Monitoring bubble cavitations and bubble dynamics are essential in enhancing non-invasive ultrasonic ablation methods like histotripsy that mechanically fractionates tissue into acellular debris using microcavitation. Histotripsy can totally fractionate tissue into a liquid-appearing homogenate with no cellular features with enough pulses. In this paper, we present the analysis of the dynamics of cavitation bubbles in a viscoelastic medium subjected to a histotripsy pulse using different fidelities in depicting compressibility and viscoelasticity effects. The mathematical formulation is described based on the Keller-Miksis equation in two models for cavitation bubbles in viscoelastic tissue through histotripsy process; the first model is in neo-Hookean, and the second is in quadratic law Kelvin-Voigt model. The governing model is solved analytically based on the modified Plesset-Zwick method. Analysis of the results reveals that the parameters of Young modulus, viscosity effects and stiffening parameter reduce the growth of cavitation microbubbles through the histotripsy process. The cavitation bubble growth increases when the gel concentration decreases during the histotripsy process.

Dependence of wetting on cavitation during the spreading of a filler droplet on the ultrasonically agitated Al substrate

The cavitation characteristics during the spreading of a pure Sn liquid droplet subjected to ultrasonication were studied for the first time through high-speed photography to reveal the wetting mechanism. Ultrasonic vibration realized the spreading of Sn droplet on the nonwetting pure Al substrate. However, the oxide layer of the substrate at the spreading front is difficult to remove. The high-speed photography result shows that a noncavitation region consistently appears at the spreading front, because the acoustic pressure is below the cavitation threshold of 1.26 MPa. In particular, the width of the noncavitation region gradually increases as the size of the spreading area increases. Such a result accounts for the condition wherein the oxide layer at the spreading front is difficult to remove. Furthermore, the bubble density during spreading gradually decreases due to the decreased acoustic pressure of the thinned liquid. Finally, the bubble dynamics were calculated to verify the wetting mechanism.

Can Nanoparticles in Homeopathic Remedies Enhance Phototherapy of Cancer? A Hypothetical Model

The continuous rise in cancer incidence places a massive burden on the health sector to increase efforts in the fight against cancer. As a holistic complementary medicine modality, homeopathy has the potential to assist in the supportive and palliative treatment of cancer patients. Recent empirical studies demonstrate the presence of silica and original source nanoparticles in ultra-high dilutions of several homeopathic medicines. Recent studies have also demonstrated the efficacy of phototherapy in inducing the ablation of cancer cells through laser-activated nanoparticle photosensitizers. A new hypothetical research model is presented herein, in an attempt to investigate and compare the phototherapeutic effects of homeopathic source nanoparticles with photosensitizing nanoparticle agents that have previously been tested.

Analytical optimization of the cutting efficiency for generic cavitation bubbles

A theoretical method to determine the optimum laser parameters for maximizing the cutting efficiency for different materials (in particular human cornea) is proposed. The model is simple and reduced to laser beam characteristics and cavitation properties. The model further provides a method to convert energy fluctuations during the cutting process to equivalent deviations in the cavitation bubbles. The proposed model can be used for calibration, verification and validation purposes of laser systems used for cutting processes at relatively low cost and may improve the quality of the results.

Bubble dynamic evolution, material strengthening and chemical effect induced by laser cavitation peening

The mechanism of laser cavitation peening (LCP) including laser shock wave, bubble collapse shock wave, and water-jet was investigated at various stand-off distances (γ) combined with experiment and simulation. The dynamic characteristics, pressure field, and temperature field of cavitation bubble were investigated. The Q235 steel was impacted by LCP and the strengthening mechanism was analyzed, and the chemical effect in LCP was discussed. The results found that the pressure intensity of shock wave and water-jet decreases with increasing the γ. At γ=0, the laser shock wave, bubble collapse shock wave, and water-jet are 989 Mpa, 763 Mpa, and 369 Mpa respectively. The pressure and temperature of the bubble decrease obviously in the second and third pulsations. The impact of LCP causes plastic deformation on the Q235 steel surface and refines the grains on the surface layer within a depth of 20-30 μm. The enhancement of microhardness and the residual stress increases with the increase of γ, and the optimal value for LCPwc is 0.4. The degradation rate of MB solution in the infinite domain, LCPwc, and LCP is 26.4%, 41.7%, and 34.5%.

Physical investigation of acoustic waves induced by the oscillation and collapse of the single bubble

The objective of this paper is to apply both experimental and numerical methods to investigate acoustic waves induced by the oscillation and collapse of a single bubble. In the experiments, the schlieren technique is used to capture the temporal evolution of the bubble shapes, and the corresponding acoustic waves. The results are presented for the single bubble generated by a low-voltage bubble generator in the free field of water. During the numerical simulations, a three-dimensional (3D) weakly compressible model is introduced to investigate the single bubble dynamics, including the generation and propagation of acoustic waves. The results show that (1) Compression wave, rarefaction wave and shock wave are generated during expansion stage, collapse stage and rebound stage of the bubble respectively. (2) Compression waves are induced by the rapid expansion of the bubble and eventually steepen into one shock wave propagating outward in the liquid, then another strong shock wave is emitted at the final collapse stage. The velocity and pressure of the liquid field increases after the shock wave. (3) Rarefaction waves are generated during the collapse stage due to the contraction of the bubble. The rarefaction wave reduces the liquid pressure and its spatial distribution is dispersive. The pressure of these acoustic waves and their effect on the liquid velocity attenuate with the increase of propagation distance.

On the governing fragmentation mechanism of primary intermetallics by induced cavitation

One of the main applications of ultrasonic melt treatment is the grain refinement of aluminium alloys. Among several suggested mechanisms, the fragmentation of primary intermetallics by acoustic cavitation is regarded as very efficient. However, the physical process causing this fragmentation has received little attention and is not yet well understood. In this study, we evaluate the mechanical properties of primary Al3Zr intermetallics by nano-indentation experiments and correlate those with in-situ high-speed imaging (of up to 1 Mfps) of their fragmentation process by laser-induced cavitation (single bubble) and by acoustic cavitation (cloud of bubbles) in water. Intermetallic crystals were chemically extracted from an Al-3 wt% Zr alloy matrix. Mechanical properties such as hardness, elastic modulus and fracture toughness of the extracted intermetallics were determined using a geometrically fixed Berkovich nano-diamond and cube corner indenter, under ambient temperature conditions. The studied crystals were then exposed to the two cavitation conditions mentioned. Results demonstrated for the first time that the governing fragmentation mechanism of the studied intermetallics was due to the emitted shock waves from the collapsing bubbles. The fragmentation caused by a single bubble collapse was found to be almost instantaneous. On the other hand, sono-fragmentation studies revealed that the intermetallic crystal initially underwent low cycle fatigue loading, followed by catastrophic brittle failure due to propagating shock waves. The observed fragmentation mechanism was supported by fracture mechanics and pressure measurements using a calibrated fibre optic hydrophone. Results showed that the acoustic pressures produced from shock wave emissions in the case of a single bubble collapse, and responsible for instantaneous fragmentation of the intermetallics, were in the range of 20-40 MPa. Whereas, the shock pressure generated from the acoustic cavitation cloud collapses surged up to 1.6 MPa inducing fatigue stresses within the crystal leading to eventual fragmentation.

Recent advances in applications of power ultrasound for petroleum industry

Power ultrasound, as an emerging green technology has received increasing attention of the petroleum industry. The physical and chemical effects of the periodic oscillation and implosion of acoustic cavitation bubbles can be employed to perform a variety of functions. Herein, the mechanisms and effects of acoustic cavitation are presented. In addition, the applications of power ultrasound in the petroleum industry are discussed in detail, including enhanced oil recovery, oil sand extraction, demulsification, viscosity reduction, oily wastewater treatment and oily sludge treatment. From the perspective of industrial background, key issue and resolution mechanism, current applications and future development of power ultrasound are discussed. In addition, the effects of acoustic parameters on treatment efficiency, such as frequency, acoustic intensity and treatment time are analyzed. Finally, the challenges and outlook for industrial application of power ultrasound are discussed.