Sonication-Assisted Synthesis of Bimetallic Hg/Pd Alloy Nanoparticles for Catalytic Reduction of Nitrophenol and its Derivatives

Direct Ag-Hg amalgamation in the nanoscale on the surface of biosourced amorphous silica

Mercury poses a significant threat to air, soil, and water ecosystems. Mercury-based alloys, aka amalgams, are already known for their effectiveness in mercury capture in water and gaseous streams. However, limited research has been published on direct amalgamation, the process involving a direct redox reaction between two metals, occurring on the surface of amorphous silica. This study investigates the amalgamation process in nanoscale, in particular the direct interaction between silver (Ag⁰) nanoparticles supported on functionalized bio-derived amorphous silicon dioxide (SiO₂) and mercury (Hg2⁺) ions in aqueous solutions. Also, the influence of aqueous mercury speciation on amalgamation is studied in detail. The results reveal that the presence of chloride (Cl⁻), acetate (OAc⁻), and nitrate (NO3⁻) ions significantly influences the interaction between mercury and silver. We propose plausible mechanisms to explain these observations. Our findings demonstrate that the maximum mercury uptake capacity followed the order HgCl2 > Hg(OAc)2 > Hg(NO3)2, while the reaction rate followed the order Hg(OAc)2 > HgCl2 > Hg(NO3)2. These findings hold significant implications for the design of efficient mercury remediation processes. By elucidating the influence of aqueous speciation on amalgamation, our work paves the way for tailored strategies that can maximize mercury capture from water.

Influence of Co3O4 Nanostructure Morphology on the Catalytic Degradation of p-Nitrophenol

The design and fabrication of nanomaterials with controllable morphology and size is of critical importance to achieve excellent catalytic performance in heterogeneous catalysis. In this work, cobalt oxide (Co3O4) nanostructures with different morphologies (nanoplates, microflowers, nanorods and nanocubes) were successfully constructed in order to establish the morphology-property-performance relationship of the catalysts. The morphology and structure of the nanostructured Co3O4 were characterized by various techniques, and the catalytic performance of the as-prepared nanostructures was studied by monitoring the reduction of p-nitrophenol to p-aminophenol in the presence of excess NaBH4. The catalytic performance was found to be strongly dependent on their morphologies. The experimental results show that the pseudo-first-order reaction rate constants for Co3O4 nanostructures with various shapes are, respectively, 1.49 min-1 (nanoplates), 1.40 min-1 (microflowers), 0.78 min-1 (nanorods) and 0.23 min-1 (nanocubes). The Co3O4 nanoplates exhibited the highest catalytic activity among the four nanostructures, due to their largest specific surface area, relatively high total pore volume, best redox properties and abundance of defect sites. The established correlation between morphology, property and catalytic performance in this work will offer valuable insight into the design and application of nanostructured Co3O4 as a potential non-noble metal catalyst for p-nitrophenol reduction.

Unravelling the Surface Oxidation-Induced Evolution of the Electronic Structure of Gallium

Gallium is widely used in liquid metal catalyst fabrication, and its oxidized species is a well-known dielectric material. In the past decades, these two species have been well studied separately. However, the surface oxide layer-induced impact on the chemical and electronic structure of (liquid) gallium is still mostly unclear because of the extreme fast formation of thermodynamically stable surface Ga2O3. In this study, we used a combination of direct and inverse photoemission complemented by scanning electron microscopy to examine the surface properties of Ga and Ga oxide (on a SiOx/Si support) and the evolution of the surface structure upon stepwise oxidation and subsequent reduction at an elevated temperature. We find oxidation time-dependent self-limited formation of a substoichiometric Ga2O3-δ surface layer on the Ga nanoparticles. The valence band maximum (conduction band minimum) for this Ga2O3-δ is located at -3.8 (±0.1) eV [1.4 (±0.2) eV] with respect to the Fermi level, resulting in an electronic surface band gap of 5.2 (±0.2) eV. Upon annealing in ultrahigh vacuum conditions, the Ga2O3-δ surface layer can efficiently be removed when using temperatures of 600 °C and higher. This study reveals how the surface properties of Ga nanoparticles are influenced by stepwise oxidation-reduction, providing detailed insights that will benefit the optimization of this material class for different applications.

Bimetallic Nanoalloy Catalysts for Green Energy Production: Advances in Synthesis Routes and Characterization Techniques

Bimetallic Nanoalloy catalysts have diverse uses in clean energy, sensing, catalysis, biomedicine, and energy storage, with some supported and unsupported catalysts. Conventional synthetic methods for producing bimetallic alloy nanoparticles often produce unalloyed and bulky particles that do not exhibit desired characteristics. Alloys, when prepared with advanced nanoscale methods, give higher surface area, activity, and selectivity than individual metals due to changes in their electronic properties and reduced size. This review demonstrates the synthesis methods and principles to produce and characterize highly dispersed, well-alloyed bimetallic nanoalloy particles in relatively simple, effective, and generalized approaches and the overall existence of conventional synthetic methods with modifications to prepare bimetallic alloy catalysts. The basic concepts and mechanistic understanding are represented with purposely selected examples. Herein, the enthralling properties with widespread applications of nanoalloy catalysts in heterogeneous catalysis are also presented, especially for Hydrogen Evolution Reaction (HER), Oxidation Reduction Reaction (ORR), Oxygen Evolution Reaction (OER), and alcohol oxidation with a particular focus on Pt and Pd-based bimetallic nanoalloys and their numerous fields of applications. The high entropy alloy is described as a complicated subject with an emphasis on laser-based green synthesis of nanoparticles and, in conclusion, the forecasts and contemporary challenges for the controlled synthesis of nanoalloys are addressed.

Design and development of molten metal nanomaterials using sonochemistry for multiple applications

Molten metals have prospective applications as soft fluids with unique physical and chemical properties, yet materials based on them are still in their infancy and have great potential. Ultrasonic irradiation of molten metals in liquid media induces acoustic cavitation and dispersion of the liquid metal into micrometric and nanometric spheres. This review focuses on the synthesis of mmetallic materials via sonochemistry from molten metals with low melting point (< 420 ᴼC): Ga, Hg, In, Sn, Bi, Pb, and Zn, which can be melted in organic or inorganic media or water and of aqueous solutions of metallic ions to form two immiscible liquid phases. Organic molecule entrapment, polymer solubilization, chiral imprinting, and catalyst incorporation within metals or metallic particles were recently developed to provide novel hybrid nanomaterials for several applications including catalysis, fuel cells, and biomass-to-biofuel conversion. In all cases where molten metal was sonicated in an organic solvent, in addition to a solid precipitant, an interesting supernatant was obtained that contained metal-doped carbon dots (M@C-dots). Some of these M@C-dots were found to exhibit highly effective antimicrobial activity, promote neuronal tissue growth, or have utility in lithium-ion rechargeable batteries. The economic feasibility and commercial scalability of molten metal sonochemistry attract fundamental interest in the reaction mechanisms, as the versatility and controllability of the structure and material properties invite exploration of various applications.

Bimetallic (AuAg, AuPd and AgPd) nanoparticles supported on cellulose-based hydrogel for reusable catalysis

Biopolymer-derived hydrogels with low-cost and sustainable features have been considered as fascinating supported materials for metal nanoparticles. Cellulose, as the most abundant biopolymer, is a renewable raw material to prepare biopolymer-derived hydrogels for catalysis. Here, a cellulose-based hydrogel is designed to load bimetallic (AuAg, AuPd and AgPd) nanoparticles. 4-Nitrophenol reduction and Suzuki-Miyaura coupling reactions are selected to evaluate and compare the catalytic performance of the resulting bimetallic nanoparticle-loaded cellulose-based composite hydrogels. The bimetallic nanocomposite hydrogels are easy to be recycled over 10 times during the catalytic experiments and possess good applicability and generality for various substrates. The catalytic activity of bimetallic nanocomposite hydrogels was compared with recent literatures. In addition, the possible catalytic mechanism is also proposed. This work is expected to give a new insight for designing and preparing bimetallic nanoparticle-based cellulose hydrogels and proves its applicability and prospect in the catalytic field.

Sonochemistry of molten metals

Ultrasonic irradiation of molten metals in liquid media causes dispersion of the metals into suspensions of micro- and nanoparticles that can be separated. This is applicable mainly to low-m_p elemental metals or alloys, but higher m_p elemental metals or alloys were also reported. Among metals, mercury and gallium exhibit especially-low melting points and are thus considered as liquid metals (LMs). Sonication of mercury in aqueous solutions of certain metal ions can cause simultaneous reduction of the ions and reactions between the metals. Gallium can be melted and sonicated in warm water, as well as in aqueous solutions of various solutes such as metal ions and organic compounds, which opened a wide window of interactions between the gallium particles and the solutes. Sonication of molten metals in organic liquids, such as polyethylene glycol (PEG) 400, forms carbon dots (C-dots) doped with nanoparticles of these metals. This review article summarizes the various interactions and reactions that occur upon sonication of metals in liquid media.

Facile insitu preparation of silver nanoparticles supported on petroleum asphaltene-derived porous carbon for efficient reduction of nitrophenols

Herein, a facile in situ approach to synthesize catalytically active Ag nanoparticles supported on eco-friendly asphaltene-derived porous carbon (APC) was reported. Asphaltene-derived porous carbon was used as support for the first time for Ag@APC to prevent nanoparticles from aggregation, and then was evaluated as catalyst for the reduction of 4-nitrophenol (PNP), 2,4-dinitrophenol (DNP), and 2,4,6-trinitrophenol (TNP). The synthesized Ag nanoparticles were characterized by XRD, UV, BET, FESEM, TEM, and ICP analyses, revealing the formation of uniformly distributed, fcc structured crystalline Ag nanoparticles with BET surface area varied between 1500 and 1723 cm⁻¹ with a porous carbon surface. Ag@APC nanocatalyst showed high catalytic efficiency in the reduction of nitrophenols in the presence of NaBH₄ under mild conditions. The reduction of PNP, DNP, and TNP have pseudo-first-order rate constants of 0.3340, 0.2570, and 0.2408 min⁻¹, respectively. The catalyst could be recyclable and reused for at least five successive runs without losing its original activity.

•

Asphaltene-derived porous carbon (APC) was used as a support for Ag nanocatalyst (Ag@APC) for the first time.

•

Facile in-situ preparation of Ag@APC catalyst.

•

High catalytic efficiency (approximately 100%) in the nitrophenol reductions.

•

High stability and reusability of Ag@APC catalyst.

α-Hydroxy acids modified β-cyclodextrin capped iron nanocatalyst for rapid reduction of nitroaromatics: A sonochemical approach

This study reports a sonochemical approach for the synthesis and catalytic performance of zerovalent iron nanoparticles (nZVI) capped with two cyclodextrin (CD) crosslinked polymers derived from Lactic acid and Citric acid (CDLA and CDCA respectively). The polymers and the catalysts were characterized by NMR, FTIR, HRTEM, DLS, Zeta potential, FESEM, EDAX, VSM, XRD, XPS, TGA analysis. The catalysts proved to be sustainable and recyclable for rapid sonochemical reduction of nitroaromatics under ambient conditions. The isolated yield of the derivatives was found to be greater than 90%. The results suggest excellent dispersibility, stability, high iron content and smaller size of CDLA polymer capped nZVI compared to CDCA capped nZVI, leading to two-fold higher catalytic activity. The effect of various crucial catalysis parameters was investigated and optimized. The scope of the reaction was extended to other nitroaromatics under the optimized conditions. Being magnetically separable, the cost effective and non-toxic catalysts exhibited high recycling efficiency (~13 cycles), high turnover number (TON) and turnover frequency (TOF). The recyclable catalysts could be low-cost and sustainable options for organic transformation in water via sonochemical approach in aqueous medium.

Synthesis of bimetallic Co–Pt/cellulose nanocomposites for catalytic reduction of p-nitrophenol

The sonochemical synthesis of Co–Pt nanoparticles anchored on cellulose nanofibers (CNFs) was demonstrated. An enhancement in the catalytic activity of the synthesized Co–Pt/CNF nanocomposite catalyst was observed for the reduction of p-NP due to synergy effects.

High-Efficiency Biocidal Solution Based on Radiochemically Synthesized Cu-Au Alloy Nanoparticles

The use of nanotechnologies in the applied biomedical sciences can offer a new way to treat infections and disinfect surfaces, materials, and products contaminated with various types of viruses, bacteria, and fungi. The Cu-Au nanoparticles (NPs) were obtained by an eco-friendly method that allowed the obtaining in a one-step process of size controlled, well dispersed, fully reduced, highly stable NPs at very mild conditions, using high energy ionizing radiations. The gamma irradiation was performed in an aqueous system of Cu²⁺/Au³⁺/Sodium Dodecyl Sulfate (SDS)/Ethylene Glycol. After irradiation, the change of color to ruby-red was the first indicator for the formation of NPs. Moreover, the UV-Vis spectra showed a maximum absorption peak between 524 and 540 nm, depending on the copper amount. The Cu-Au NPs presented nearly spherical shapes, sizes between 20 and 90 nm, and a zeta potential of about −44 mV indicating a good electrostatic stability. The biocidal properties performed according to various standards applied in the medical area, in dirty conditions, showed a 5 lg reduction for Staphylococcus aureus, Pseudomonas aeruginosa, and Enterococcus hirae, a 5 lg reduction for both enveloped and non-enveloped viruses such as Adenovirus type 5, Murine Norovirus, and human Coronavirus 229E, and a 4 lg reduction for Candida albicans, respectively. Thus, the radiochemically synthesized Cu-Au alloy NPs proved to have high biocide efficiency against the tested bacteria, fungi, and viruses (both encapsulated and non-encapsulated). Therefore, these nanoparticle solutions are suitable to be used as disinfectants in the decontamination of hospital surfaces or public areas characterized by high levels of microbiological contamination.

Bimetallic nanocomposite (Ag-Au, Ag-Pd, Au-Pd) synthesis using gum kondagogu a natural biopolymer and their catalytic potentials in the degradation of 4-nitrophenol

Bimetallic nanoparticles (BNPs) constitute two different metal elements and exhibit relatively superior mechanistic and catalytic efficacies owing to their synergistic functions over monometallic nanoparticles. In the present study various bimetallic Ag-Au, Ag-Pd, Au-Pd nanoparticles were synthesized using a natural biopolymer gum kondagogu (GK) as a reducing and capping agent, by a simple and cost-effective method. The synthesized BNPs when characterized using UV-vis spectroscopy revealed a specific surface plasmon resonance band (SPR) of each nanocomposite. The average particle size of Ag-Au, Ag-Pd, and Au-Pd BNPs was found to be 23 ± 10.3, 21 ± 7.6, and 23 ± 9.4 nm respectively based on transmission electron microscopy analysis. Surface morphology and functional groups on the gum matrix of GK-BNPs were analyzed by XRD and FT-IR respectively. The bimetallic nanocomposites were evaluated for their catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol in the presence of NaBH₄. The kinetic studies performed, depicted rate constants for Ag-Au, Ag-Pd, and Au-PdNPs as 0.31, 0.39, and 0.28 min^-1 respectively. The catalytic efficiencies of three bimetallic nanocomposites were of the following order Ag-Pd > Ag-Au > Au-Pd. This study establishes the catalytic potentials of the three different bimetallic nanocomposites in the reduction of 4-NP an environmental pollutant, and the impact of their synergistic property.

Sonochemical fabrication of inorganic nanoparticles for applications in catalysis

Catalysis covers almost all the chemical reactions or processes aiming for many applications. Sonochemistry has emerged in designing and developing the synthesis of nano-structured materials, and the latest progress mainly focuses on the synthetic strategies, product properties as well as catalytic applications. This current review simply presents the sonochemical effects under ultrasound irradiation, roughly describes the ultrasound-synthesized inorganic nano-materials, and highlights the sonochemistry applications in the inorganics-based catalysis processes including reduction, oxidation, degradation, polymerization, etc. Or all in all, the review hopes to provide an integrated understanding of sonochemistry, emphasize the great significance of ultrasound-assisted synthesis in structured materials as a unique strategy, and broaden the updated applications of ultrasound irradiation in the catalysis fields.

Sonochemical catalysis as a unique strategy for the fabrication of nano-/micro-structured inorganics

Ultrasound-assisted approaches, as an important trend in material synthesis, have emerged for designing and creating nano-/micro-structures. This review simply presents the basic principles of ultrasound irradiation including acoustic cavitation, sonochemical effects, physical and/or mechanical effects, and on the basis of the latest progress, it newly summarizes sonochemical catalysis for the fabrication of nano-structured or micro-structured inorganic materials such as metals, alloys, metal compounds, non-metal materials, and inorganic composites, where the theories or mechanisms of catalytic synthetic routes, and the morphologies, structures, sizes, properties and applications of products are described in detail. In the review, a few technological potentials and probable challenges of sonochemical catalysis are also highlighted for the future advance of synthesis methods. Therefore, sonochemical catalysis or ultrasound-assisted synthesis will serve as a unique strategy to reveal its great significance in material fabrication.

Synthesis and catalytic utilization of bimetallic systems for wastewater remediation: A review

The environment is affected by agricultural, domestic, and industrial activities that lead to drastic problems such as global warming and wastewater generation. Wastewater pollution is of public concern, making the treatment of persistent pollutants in water and wastewater highly imperative. Several conventional treatment technologies (physicochemical processes, biological degradation, and oxidative processes) have been applied to water and wastewater remediation, but each has numerous limitations. To address this issue, treatment using bimetallic systems has been extensively studied. This study reviews existing research on various synthesis methods for the preparation of bimetallic catalysts and their catalytic application to the treatment of organic (dyes, phenol and its derivatives, and chlorinated organic compounds) and inorganic pollutants (nitrate and hexavalent chromium) from water and wastewater. The reaction mechanisms, removal efficiencies, operating conditions, and research progress are also presented. The results reveal that Fe-based bimetallic catalysts are one of the most efficient heterogeneous catalysts for the treatment of organic and inorganic contamination. Furthermore, the roles and performances of bimetallic catalysts in the removal of these environmental contaminants are different.

Synthesis, Properties, and Biological Applications of Metallic Alloy Nanoparticles

Metallic alloy nanoparticles are synthesized by combining two or more different metals. Bimetallic or trimetallic nanoparticles are considered more effective than monometallic nanoparticles because of their synergistic characteristics. In this review, we outline the structure, synthesis method, properties, and biological applications of metallic alloy nanoparticles based on their plasmonic, catalytic, and magnetic characteristics.