Sonochemical synthesis of samarium tungstate nanoparticles for the electrochemical detection of nilutamide

Boosting plant resilience: The promise of rare earth nanomaterials in growth, physiology, and stress mitigation

Rare earth elements (REE) have been extensively used in a variety of applications such as cell phones, electric vehicles, and lasers. REEs are also used as nanomaterials (NMs), which have distinctive features that make them suitable candidates for biomedical applications. In this review, we have highlighted the role of rare earth element nanomaterials (REE-NMs) in the growth of plants and physiology, including seed sprouting rate, shoot biomass, root biomass, and photosynthetic parameters. In addition, we discuss the role of REE-NMs in the biochemical and molecular responses of plants. Crucially, REE-NMs influence the primary metabolites of plants, namely sugars, amino acids, lipids, vitamins, enzymes, polyols, sorbitol, and mannitol, and secondary metabolites, like terpenoids, alkaloids, phenolics, and sulfur-containing compounds. Despite their protective effects, elevated concentrations of NMs are reported to induce toxicity and affect plant growth when compared with lower concentrations, and they not only induce toxicity in plants but also affect soil microbes, aquatic organisms, and humans via the food chain. Overall, we are still at an early stage of understanding the role of REE in plant physiology and growth, and it is essential to examine the interaction of nanoparticles with plant metabolites and their impact on the expression of plant genes and signaling networks.

Dual effects of ultrasound on fabrication of anodic aluminum oxide

Ultrasound has been proven to enhance the mass transfer process and impact the fabrication of anodic aluminum oxide (AAO). However, the different effects of ultrasound propagating in different media make the specific target and process of ultrasound in AAO remain unclear, and the effects of ultrasound on AAO reported in previous studies are contradictory. These uncertainties have greatly limited the application of ultrasonic-assisted anodization (UAA) in practice. In this study, the bubble desorption and mass transfer enhancement effects were decoupled based on an anodizing system with focused ultrasound, such that the dual effects of ultrasound on different targets were distinguished. The results showed that ultrasound has the dual effects on AAO fabrication. Specifically, ultrasound focused on the anode has a nanopore-expansion effect on AAO, leading to a 12.24 % improvement in fabrication efficiency. This was attributed to the promotion of interfacial ion migration through ultrasonic-induced high-frequency vibrational bubble desorption. However, AAO nanopores were observed to shrink when ultrasound was focused on the electrolyte, accompanied by a 25.85 % reduction in fabrication efficiency. The effects of ultrasound on mass transfer through jet cavitation appeared to be the reason for this phenomenon. This study resolved the paradoxical phenomena of UAA in previous studies and is expected to guide AAO application in electrochemistry and surface treatments.

Two dimensional architectures of graphitic carbon nitride with the substitution of heteroatoms for bifunctional electrochemical detection of nilutamide

The exploration of graphitic carbon nitride (g-C₃N₄), a two-dimensional (2D) metal-free polymer semiconducting material, is largely discussed due to its large specific surface area, high electrical conductivity, thermal stability, and adaptable electronic structure. The adaption of sulfur (S) and phosphorous (P) atoms into the layers of g-C₃N₄ increases the electrochemical performance of detecting nilutamide (NT). The aggregation severity can be decreased by integrating S/P into g-C₃N₄, thereby improving surface area and electrical conductance. The g-C₃N₄, S/gC₃N₄, P/g-C₃N₄, and S/P/g-C₃N₄ were studied with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Fourier transform infrared (FTIR), Ultraviolet visible spectroscopy (UV), Thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET). The well-assigned S/P/g-C₃N₄ exhibited a good crystalline structure with more active sites for improved electron transfer toward NT detection. Both differential pulse voltammetry (DPV) and amperometry (IT) was studied for NT detection. The electrochemical studies were done with a linear range of 0.019-1.17 μM to 5.36-1891.98 μM in DPV and 0.01 μM-158.3 μM in IT technique. The attained limit of detection in DPV analysis was 3.2 nM and with IT analysis 2.4 nM. The nanocomposite S/P/g-C₃N₄ shows good selectivity towards NT. The fabricated electrode showed excellent repeatability, reproducibility, and stability, with a significant recovery range in real sample analysis.

Enhancing catalytic activity through the construction of praseodymium tungstate decorated on hierarchical three-dimensional porous biocarbon for determination of furazolidone in aquatic samples

Boosting catalytic performance as a vital role for an electrochemical sensor for monitoring various hazardous nitro drugs. Herein, an inexpensive, facile, and eco-friendly construction of praseodymium tungstate decorated on three dimensional porous biocarbon (PrW/3D-PBC) for electrochemical determination of carcinogenic residue furazolidone (FZ). The nanostructured PrW nanoparticles were prepared by solvent evaporation from peroxo-tungstic acid and 3D-PBC was prepared from biomass precursor under the carbonization method. Furthermore, the composite of PrW decorated on 3D-PBC was prepared by an ultrasonic-assisted wet chemical approach. Besides, the composite characterization of crystalline, functional group, degree of carbonization, chemical states, and morphology were utilized by theXRD, FTIR, RAMAN, XPS, and FESEM analysis. These 3D porous carbon decorated PrW nanoparticles facilitate the electrochemical anchoring sites, surface area, and ease of diffusion layers towards the detection of hazardous nitro pollutant FZ by using CV analysis. The low LOD and high sensitivity were achieved by FZ determination through using LSV and DPV techniques. The practical capability of the PrW/3D-PBC/GCE sensor was determined by using aquatic samples to achieve a good recovery result. These results instigate that the PrW/3D-PBC will be an efficient electrocatalytic material for FZ sensor in environmental aquatic samples.

A sonochemical synthesis of SrTiO3 supported N-doped graphene oxide as a highly efficient electrocatalyst for electrochemical reduction of a chemotherapeutic drug

A sonochemical based green synthesis method playa powerful role in nanomaterials and composite development. In this work, we developed a perovskite type of strontium titanate via sonochemical process. SrTiO₃ particles were incorporated with nitrogen doped graphene oxide through simple ultrasonic irradiation method. The SrTiO₃/NGO was characterized by various analytical methods. The nanocomposite of SrTiO₃/NGO was modified with laser-induced graphene electrode (LIGE). The SrTiO₃/NGO/LIGE was applied for electrochemical sensor towards chemotherapeutic drug detection (nilutamide). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques have been used to examine the electrochemical performance of nilutamide (anti-cancer drug). DPV was found to be more sensitive and found to exhibit a sensitivity 8.627 µA µM^-1 cm^-2 for SrTiO₃/NGO/LIGE with a wide linear range (0.02-892 µM) and low Limit of detection (LOD: 1.16 µM). SrTiO₃/NGO/LIGE has been examined for the detection of nilutamide in blood serum and urine samples and obtained a good recovery in the range of 97.2-99.72 %. The enhanced stability and selectivity and practical application results indicates the suitability of SrTiO₃/NGO/LIGE towards the detection of nilutamide drug in pharmaceutical industries.

Facile synthesis of neodymium stannate nanoparticles an effective electrocatalyst for the selective detection of dimetridazole in biological samples

In this work, pyrochlore neodymium stannate nanoparticles (Nd₂Sn₂O₇ NP) have been synthesized by a facile co-precipitation technique and employed as an electrode material on GCE for the determination of dimetridazole (DM) drug. The physical properties and texture of the Nd₂Sn₂O₇ NP were characterized by PXRD, Raman spectroscopy, FE-SEM, EDX mapping, XPS, and HR-TEM analytical studies. The electrocatalytic investigation of Nd₂Sn₂O₇ NP/GCE was carried out by CV, and DPV techniques. The fabricated Nd₂Sn₂O₇ NP/GCE shows a lower LOD of 6 nm towards the determination of DM and the calculated sensitivity is 0.61 μA μM^-1 cm^-2. In addition to that, the constructed sensor delivers notable repeatability, reproducibility, and superior selectivity with the existence of metal ions, biological molecules, and nitro compounds, enabling the electrochemical detection of DM. Furthermore, Nd₂Sn₂O₇ NP/GCE sensor displays acceptable recovery results in the real sample analysis in biological fluids such as human blood serum and human urine.

Rational design and preparation of copper vanadate anchored on sulfur doped reduced graphene oxide nanocomposite for electrochemical sensing of antiandrogen drug nilutamide using flexible electrodes

Copper vanadate nanoparticles (Cu₂V₂O₇) are synthesized by using a simple hydrothermal method and later anchored with sulfur-doped reduced graphene oxide (S-rGO) by using ultrasonication to form a hybrid nanocomposite. The synthesized composite underwent characterizations like X-ray diffraction analysis (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), Dynamic ray scattering-Ultra violet-visible spectroscopy (DRS-UV-visible) and X-ray photoelectron spectroscopically revealed the triclinic pattern of the P 1̅ space group of α-Cu₂V₂O₇ and the reduced oxygen deficiency state of metal centers (Cu⁺ or V⁴⁺) resulting with oxides of mixed-valence oxidative states and forming of Cu-O bond. Morphological analysis was carried out by using transmission electron microscopy (TEM) and Field emission scanning electron microscopy (FE-SEM) with elemental mapping and EDX analysis. Furthermore, a novel electrochemical sensor is prepared by using the hybrid sCu₂V₂O₇/S-rGO nanocomposite on to a disposable screen-printed carbon paste electrode (SPCE) for electrochemical sensing of antiandrogen drug nilutamide (NLT). This report reveals excellent activity in determining NLT with a low detection limit of 0.00459 nM for the linear range of 0.001-15 μM with high sensitivity of 26.2605 µA µM^-1 cm^-2. Further, electrode performance showed appreciable performance in real-time monitoring of biological samples like human blood serum, urine samples.

Facile synthesis of Co(ii)-doped cobalt oxide nanostructures: their application in the sensitive determination of the prophylactic drug furazolidone

Electrochemical detection of prophylactic drug furazolidone through Co–Co₂O₄ modified GCE.

Nanomaterial-based electrochemical sensors and biosensors for the detection of pharmaceutical compounds

The surging growth of the pharmaceutical industry is a result of the rapidly increasing human population, which has inevitably led to new biomedical and environmental issues. Aside from the quality control of pharmaceutical production and drug delivery, there is an urgent need for precise, sensitive, portable, and cost-effective technologies to track patient overdosing and to monitor ambient water sources and wastewater for pharmaceutical pollutants. The development of advanced nanomaterial-based electrochemical sensors and biosensors for the detection of pharmaceutical compounds has garnered immense attention due to their advantages, such as high sensitivity and selectivity, real-time monitoring, and ease of use. This review article surveys state-of-the-art nanomaterials-based electrochemical sensors and biosensors for the detection and quantification of six classes of significant pharmaceutical compounds, including anti-inflammatory, anti-depressant, anti-bacterial, anti-viral, anti-fungal, and anti-cancer drugs. Important factors such as sensor/analyte interactions, design rationale, fabrication, characterization, sensitivity, and selectivity are discussed. Strategies for the development of high-performance electrochemical sensors and biosensors tailored toward specific pharmaceuticals are highlighted to provide readers and scientists with an extensive toolbox for the detection of a wide range of pharmaceuticals. Our aims are two-fold: (i) to inspire readers by further elucidating the properties and functionalities of existing nanomaterials for the detection of pharmaceuticals; and (ii) to provide examples of the potential opportunities that these devices have for the advanced sensing of pharmaceutical compounds toward safeguarding human health and ecosystems on a global scale.