Citrus pectin modified by microfluidization and ultrasonication: Improved emulsifying and encapsulation properties

Effect of pH, protein/polysaccharide ratio and preparation method on the stability of lactoferrin-polysaccharide complexes

In this study, carrageenan (CG), xanthan gum (XG) and locust bean gum (LBG), which can be used in infant formulas in China national standards, were selected to prepare LF-polysaccharide complexes to improve the stability of lactoferrin. The results showed that LF interacted more strongly with polysaccharides and did not affect the LF structure to a large extent when the pH and protein/polysaccharide mass ratio were 7 and 10:1 for LF-CG, 8 and 5:1 for LF-XG, 7 and 15:1 for LF-LBG. The zeta potential and fluorescence intensity of the LF-polysaccharide complexes displayed a decreasing trend with the increase in pH. When pH < 6, LF-CG and LF-XG exhibited precipitation and increased UV absorbance. Complexation between LF and CG/XG mainly attributed to electrostatic interactions, while LF and LBG form complexes based on hydrogen bonding or hydrophobic interactions. This study could provide a reference for the practical application of LF in infant formula.

Higher molecular weight pectin inhibits ice crystal growth and its effect on the microstructural and physical properties of pectin cryogels

Understanding the formation of ice crystals is essential for tailoring the microstructure and physical properties of cryogels. This study investigated the effects and mechanisms of pectin molecular weight (Mw) on impacting ice crystal formation. Pectin fractions various Mw (10.13-212.20 kDa) were prepared by hydrothermal method. The solution of high Mw pectin fractions exhibited higher contact angle, lower water freedom, and stronger adsorption of water molecules. The splat experiment and molecular dynamic (MD) results confirmed that higher Mw pectin have stronger ice crystal growth inhibition activity than lower Mw pectin. Furthermore, the pore size distribution of the cryogel increased from 98-203 μm to 105-267 μm as the molecular weight decreased from 212.2 kDa to 121.0 kDa. Additionally, in the higher Mw pectin cryogel, stronger mechanical strength was observed. These findings suggested that changing the molecular weight of pectin has the potential to regulate the ice crystal growth, microstructure and physical properties of frozen products.

Effect of excitation voltage in a magnetically induced electric field on the physicochemical, structural and functional properties of citrus pectin

Treatment with a magnetic induced electric field (MIEF) under acidic conditions has proven to be an effective method for modifying pectin, enhancing its functional attributes. In this study, the effects of varying excitation voltages of MIEF under acidic conditions on the physicochemical, structural, and functional properties of citrus pectin (CP) were explored. The results demonstrated that compared to CP without MIEF treatment, MIEF-treated CP exhibited enhanced thermal stability, rheological behavior, emulsifying and gel-forming abilities, and antioxidant capacity. These improvements were attributed to higher degrees of esterification, reduced molecular weights, and increased levels of galacturonic acid and homogalacturonan in the structural backbone of the treated CP. Additionally, MIEF treatment under acidic conditions altered the surface morphology and crystalline structure of CP. Therefore, our findings suggest that applying moderate excitation voltages (150-200 V) during MIEF treatment can enhance the functional properties of CP, leading to the production of high-quality modified pectin.

Influences of different ultrasonic treatment intensities on the molecular chain conformation and interfacial behavior of sugar beet pectin

In this study, the effects of different ultrasonic treatment intensities (57, 170, and 283 W/cm2) on the chemical composition, molecular chain characteristics, crystal structure, micromorphology, interfacial adsorption behavior and emulsifying properties of sugar beet pectin (SBP) were investigated. Ultrasonic treatment did not change the types of SBP monosaccharides, but it had impacts on their various monosaccharide contents. Moreover, the feruloylated, acetyl, and methoxy groups of SBP also undergo varying degrees of changes. The increase in ultrasonic treatment intensity led to transition in the molecular chain conformation of SBP from rigid semi-flexible chains to flexible chains, accompanied by modification in its crystal structure. Microstructural analysis of SBP confirmed the significant change in molecular chain conformation. Modified SBP could form an elastic interfacial film with higher deformation resistance on the oil-water interface. The SBP sample modified with 170 W/cm2 exhibited better emulsifying properties owing to its better interfacial adsorption behavior. Moreover, the emulsions prepared with modified SBP exhibited better stability capability under different environmental stresses (pH value, salt ion concentration, heating temperature and freeze-thaw treatment). The results revealed that the ultrasonic technology is useful to improve the emulsifying properties of SBP.

Physicochemical and antioxidant properties of pectin fractions extracted from lemon (Citrus Eureka) peels

Pectin, a natural polysaccharide, holds versatile applications in food and pharmaceuticals. However, there is a need for further exploration into extracting novel functional fractions and characterizing them thoroughly. In this study, a sequential extraction approach was used to obtain three distinct lemon pectin (LP) fractions from lemon peels (Citrus Eureka): LP extracted with sodium acetate (LP-SA), LP extracted with ethylenediaminetetraacetic acid (LP-EDTA), and LP extracted with sodium carbonate and sodium borohydride (LP-SS). Comprehensive analysis revealed low methyl-esterification in all fractions. LP-SA and LP-SS displayed characteristics of rhamnogalacturonan-I type pectin, while LP-EDTA mainly consisted of homogalacturonan pectin. Notably, LP-SA formed self-aggregated particles with rough surfaces, LP-EDTA showed interlocking linear structures with smooth planes, and LP-SS exhibited branch chain structures with smooth surfaces. Bioactivity analysis indicated that LP-SA had significant apparent viscosity and ABTS radical scavenging activity, while both LP-EDTA and LP-SS showed excellent thermal stability according to thermogravimetric analysis (TGA). Furthermore, LP-SS exhibited remarkable gel-forming ability and significant hydroxyl free radicals scavenging activity. In conclusion, this study presents a novel method for extracting various lemon pectin fractions with unique structural and bioactive properties, contributing insights for advanced applications in the food and pharmaceutical sectors.

Comparison on emulsifying and emulgelling properties of low methoxyl pectin with varied degree of methoxylation from different de-esterification methods

Low methoxyl pectin (LMP) with different degree of methoxylation (DM, 40-50 %, 20-30 % and 5-10 %) were prepared from commercially available citrus pectin using high hydrostatic pressure assisted enzymatic (HHP-pectin) and traditional alkaline (A-pectin) de-esterification method. The results showed that both de-esterification methods and DM exhibited LMPs with varied physicochemical, structural, and functional properties. As the DM decreased, LMP showed a decrease in molecular weight (Mw), while an increase in negative charges and rhamnogalacturonan I (RG-I) ratio, accompanied with better emulsion stability, emulsion gel strength and water-holding properties. Relative to A-pectin, HHP-pectin had higher Mw and lower RG-I side chain ratio, contributing to its better thermal stability, apparent viscosity, and emulgelling properties. HHP-pectin with lower DM (5-10 %) showed superior thickening, emulsifying and emulgelling properties, while that with higher DM (40-45 %) had superior thermal stability, which provided alternative for de-esterification and targeted structural modification of pectin.

Insights into the impact of modification methods on the structural characteristics and health functions of pectin: A comprehensive review

Pectin is a complex polysaccharide that is widely present in plant cells and has multiple physiological functions. However, most pectin exists in the form of protopectin, which has a large molecular weight and cannot be fully absorbed and utilized in the human gut to exert its effects. The significant differences in the structure of different sources of pectin also limited their application in the food and medical fields. In order to achieve greater development and utilization of pectin functions, this paper reviewed several commonly used methods for pectin modification from physical, chemical, and biological perspectives, and elaborated on the relationship between these modification methods and the structure and functional properties of pectin. At the same time, the functional characteristics of modified pectin and its application in medical health, such as regulating intestinal health, anticancer, anti-inflammatory, and drug transport, were reviewed, so as to provide a theoretical basis for targeted modification of pectin and the development of new modified pectin products.

Structural, chemical and technofunctional properties pectin modification by green and novel intermediate frequency ultrasound procedure

The impact of intermediate frequency ultrasound (IFUS, 582, 864 and 1144 kHz), mode of operation (continue and pulsed) and ascorbic acid (Aa) addition on the structural, chemical and technofunctional properties of commercial citrus high methoxyl-grade pectin (HMP) was investigated. The chemical dosimetry of IFUS, monitored by the triiodide formation rate (I3-), demonstrated that the pulsed ratio (1900 ms on/100 ms off) at the three frequencies was similar to that of continue mode but IFUS1144 kHz produced more acoustic streaming demonstrated by the height liquid measured using image analysis. In presence of Aa, HMP presented higher fragmentation than in its absence. IFUS did not give rise any changes in the main functional groups of the HMP. In general, a reduction in molecular weight was observed, being the presence of Aa the most influencing factor. Regarding monosaccharides, IFUS modified the structure of homogalacturonan and rhamnogalacturonan-I and increased of GalA contents of the HMP in presence of Aa at the above three frequencies. A reducing of the consistency index (k) and increasing of the flow index (n) of HMP were showed by IFUS frequency and Aa addition. The emulsifying activity and stability index were increased for HMP treated by IFUS in continue mode at all frequencies and in presence of Aa. The results presented in this research shown the effectiveness of IFUS as tool to modify pectin into different structures with different functionalities.

Microfluidization of soybean protein isolate-tannic acid complex stabilized emulsions: Characterization of emulsion properties, stability and in vitro digestion properties

Emulsion stability and sustained-release can be improved with a non-covalent complexing of a soybean protein isolate (SPI) with -tannic acid (TA) and dynamic high-pressure microfluidization (DHPM). The microstructure, physicochemical properties, and interfacial properties were investigated. The properties of the DHPM-treated emulsions were improved significantly, with the 120 MPa DHPM-treated SPI-TA emulsion (SPI-TA 120) having the best microstructure. The highest interface protein content, viscosity and viscoelasticity at 120 MPa of pressure facilitated the stability of the emulsion. The oxidation kinetics of emulsions was established. It was demonstrated that the oxidation stability of SPI-TA 120 was higher than SPI and SPI-TA emulsions without DHPM treatment. In addition, DHPM-treated SPI-TA emulsions showed the most positive effect on the slow release of curcumin compared to the control group. The formation of non-covalent protein complexes with polyphenols and DHPM treatment effectively increases the stability of emulsions.

Modification methods, biological activities and applications of pectin: A review

Pectin is a complex and functionally rich natural plant polysaccharide that is widely used in food, medical, and cosmetic industries. It can be modified to improve its properties and expand its applications. Modification methods for natural pectin can be divided into physical, chemical, enzymatic, and compound methods. Different modification methods can result in modified pectins (MPs) exhibiting different physicochemical properties and biological activities. The objectives of this paper were to review the various pectin modification methods explored over the last decade, compare their differences, summarize the impact of different modification methods on the biological activity and physicochemical properties of pectin, and describe the applications of MPs in food and pharmaceutical fields. Finally, suggestions and perspectives for the development of MPs are discussed. This review offers a theoretical reference for the rational and efficient processing of pectin and the expansion of its applications.

Dietary pectin attenuates Salmonella typhimurium-induced colitis by modulating the TLR2-NF-κB pathway and intestinal microbiota in mice

The role of dietary pectin on microbial-induced colitis, oxidative status, barrier function, and microbial composition, as well as the underlying mechanisms, is scarce. In this study, we aimed to investigate whether dietary pectin alleviates Salmonella typhimurium-induced colitis in mice. Male C57BL/6J mice fed an isocaloric and isofibrous diet with 7% pectin or cellulose were administered sterile water or Salmonella typhimurium to induce colitis, which is equal to a human food dose of 0.57% (5.68 g/kg). Dietary pectin alleviated Salmonella typhimurium-induced colitis and oxidative stress as shown by the reduced disease activity index score, decreased colon shortening and histological damage score, colonic hydrogen peroxide, malondialdehyde concentrations, and relative mRNA expressions of coenzyme Q-binding protein COQ10 homologue B (Coq10b), Ccl-2, Ccl-3, Ccl-8, Tnf-α, Il-1β, Ifn-γ, Ifn-β, and serum TNF-α protein level. Moreover, pectin administration ameliorated the downregulated colonic abundances of occludin, zonula occludens-1, zonula occludens-2, and the upregulated abundances of TLR2 and p-NF-κB in Salmonella-infected mice. Additionally, 16S rRNA analysis demonstrated that pectin altered the microbial beta-diversity and reduced Salmonella levels. Collectively, pectin ameliorated Salmonella typhimurium-induced colitis, oxidative stress, and tight junction, which may be related to the inactivation of TLR2-NF-κB signalling and reduced abundance of Salmonella.

Potential of Modification of Techno-Functional Properties and Structural Characteristics of Citrus, Apple, Oat, and Pea Dietary Fiber by High-Intensity Ultrasound

Plant fibers are rich in dietary fiber and micronutrients but often exhibit poor functionality. Ultrasonication can affect the particle size of plant fiber, thereby influencing other techno-functional properties. Therefore, this study aimed to investigate the effects of high-intensity ultrasound on citrus, apple, oat, and pea fiber. Initially, solutions containing 1 wt% of plant fiber were homogenized using ultrasonication (amplitude 116 µm, t = 150 s, energy density = 225 kJ/L, P¯ = 325 W). Due to cavitation effects induced by ultrasound, differences in particle size and a shift in the ratio of insoluble and alcohol-insoluble fractions for dietary fiber were observed. Additionally, viscosities for citrus and apple fiber increased from 1.4 Pa·s to 84.4 Pa·s and from 1.34 Pa·s to 31.7 Pa·s, respectively, at shear rates of 100 1s. This was attributed to observed differences in the microstructure. Freeze-dried samples of purified citrus and apple fiber revealed thin and nearly transparent layers, possibly contributing to enhanced water binding capacity and, therefore, increased viscosity. Water binding capacity for citrus fiber increased from 18.2 g/g to 41.8 g/g, and a 40% increase was observed for apple fiber. Finally, ultrasound demonstrated itself be an effective technology for modifying the techno-functional properties of plant fiber, such as water binding capacity.

Stabilization of anthocyanins by simultaneous encapsulation-copigmentation via protein-polysaccharide polyelectrolyte complexes

This study prepared a series of polyelectrolyte complexes (PECs) composed of heated whey protein isolate (HWPI) and different polysaccharides for simultaneous encapsulation and copigmentation of anthocyanins (ATC) and their ultimate stabilization. Four polysaccharides including chondroitin sulfate, dextran sulfate, gum arabic, and pectin were chosen due to their abilities to simultaneously complex with HWPI and copigment ATC. At pH 4.0, these PECs were formed with an average particle size of 120-360 nm, the ATC encapsulation efficiency of 62-80%, and the production yield of 47-68%, depending on the type of polysaccharides. The PECs effectively inhibited the degradation of ATC during storage and when exposed to neutral pH, ascorbic acid, and heat. Pectin had the best protection, followed by gum arabic, chondroitin sulfate, and dextran sulfate. The stabilizing effects were associated with the hydrogen bonding, hydrophobic and electrostatic interactions between HWPI and polysaccharides, conferring dense internal network and hydrophobic microenvironment in the complexes.

Interaction between ultrasound-modified pectin and icaritin

Pectin can improve the bioaccessibility of icaritin as a nanocarrier, and ultrasound can modify the pectin structure. However, the interaction between ultrasound-modified pectin (UMP) and icaritin remains unclearly. In this work, the effects of UMP on the physiochemical properties of icaritin/pectin micelles (IPMs) were investigated. The IPMs prepared with UMP (UMP-IPMs) showed lower encapsulation efficiencies and loading capacities, comparing with native IPMs. UMP-IPMs had smaller particle sizes (325-399 nm) than native IPMs (551 nm). The Mw, viscosity, G' and G" of pectin were determined. NMR spectra indicated that the repeating unit in pectins remained consistently before and after ultrasound treatment, and 7-OH of icaritin was involved in hydrogen bond formation with pectin. The larger chemical shift movement of 6-H and 7-OH for U3-IPMs than P0-IPMs suggested that stronger hydrogen bond interaction between icaritin and pectin. UMP-IPMs exhibited stronger anti-proliferation activities against HepG2 cells than native IPMs.

Characterize the physicochemical properties and microstructure of pectin from high-pressure and thermal processed cloudy hawthorn (Crataegus pinnatifida) juice based on acid heating extraction

Physicochemical properties and morphological features of pectin in high-pressure-processing (JHPP) and thermal-processing (JTP) treated cloudy hawthorn juice were investigated based on acid heating extraction. Pectin from hawthorn juice was identified as low methoxy pectin (41.77%), which was significantly reduced to 34.56%-39.51% from JHPP, while pectin esterification degree (DE) from JTP increased to 45.58%, which can also be confirmed by Fourier transform infrared spectroscopy. In comparison to control, pectin linearity of JHPP and JTP significantly decreased with more highly branched-chains. However, no significate difference was observed in thermostability, crystallinity and main functional groups. Interestingly, a large number of aggregations was observed in JHPP pectin, and the intermodular distance of JTP pectin was enhanced, which was consistent with the results of viscosity, molecular weight and DE. These findings provided insights into utilization of hawthorn pectin and application of high-pressure processing (HPP) for improving quality property of fruit products by pectin modification.

Nanostructured steady-state nanocarriers for nutrients preservation and delivery

Food bioactives possess specific physiological benefits of preventing certain diet-related chronic diseases or maintain human health. However, the limitations of the bioactives are their poor stability, lower water solubility and unacceptable bioaccessibility. Structure damage or degradation is often found for the bioactives under certain environmental conditions like high temperature, strong light, extreme pH or high oxygen concentration during food processing, packaging, storage and absorption. Nanostructured steady-state nanocarriers have shown great potential in overcoming the drawbacks for food bioactives. Various delivery systems including solid form delivery system, liquid form delivery system and encapsulation technology have been developed. The embedded food nutrients can largely decrease the loss and degradation during food processing, packaging and storage. The design and application of stimulus and targeted delivery systems can improve the stability, bioavailability and efficacy of the food bioactives upon oral consumption due to enzymatic degradation in the gastrointestinal tract. The food nutrients encapsulated in the smart delivery system can be well protected against degradation during oral administration, thus improving the bioavailability and releazing controlled or targeted release for food nutrients. The encapsulated food bioactives show great potential in nutrition therapy for sub-health status and disease. Much effort is required to design and prepare more biocompatible nanostructured steady-state nanocarriers using food-grade protein or polysaccharides as wall materials, which can be used in food industry and maintain the human health.

Influences of Ultrasonic Treatments on the Structure and Antioxidant Properties of Sugar Beet Pectin

The objective of this study was to explore the structural changes and oxidation resistance of ultrasonic degradation products of sugar beet pectin (SBP). The changes in the structures and antioxidant activity between SBP and its degradation products were compared. As the ultrasonic treatment time increased, the content of α-D-1,4-galacturonic acid (GalA) also increased, to 68.28%. In addition, the neutral sugar (NS) content, esterification degree (DE), particle size, intrinsic viscosity and viscosity-average molecular weight (M_V) of the modified SBP decreased. Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to study the degradation of the SBP structure after ultrasonication. After ultrasonic treatment, the DPPH and ABTS free radical scavenging activities of the modified SBP reached 67.84% and 54.67% at the concentration of 4 mg/mL, respectively, and the thermal stability of modified SBP was also improved. All of the results indicate that the ultrasonic technology is an environmentally friendly, simple, and effective strategy to improve the antioxidant capacity of SBP.

Critical review on alterations in physiochemical properties and molecular structure of natural polysaccharides upon ultrasonication

Natural polymers, such as polysaccharides, cellulose, and starch, have been widely used in the chemical engineering, medicine, food, and cosmetics industries, which had a great many of biological activities. Natural polysaccharides origin from algae, fungi and plants were components of human diet since antique times. Ultrasonication achieved the breakage the polysaccharides reticulum in an ordered fashion. The factors of temperature, ratio of water/material, sonication frequency, time of exposure, pH of the sonication medium influenced the polysaccharide digestion. Sonication improved the enzyme catalysis over its substrate molecule. Positive health promoting slow digestive starch and resistant starch can be prepared quite easily by the sonication process. The aim of this review is to present the current status and scope of natural polymers as well as some emerging polymers with special characteristic. The physiochemical properties and molecular structure of natural carbohydrates under ultrasonic irradiation were also discussed. Moreover, Polysaccharide based films had industrial applications is formed by ultrasonication. Polysaccharide nanoparticles obtained by sonication had efficient water holding capacity. Sonication is an advanced method to improve the food quality. Hence, this review describes the effects of ultrasonication on physical, chemical, and molecular structure of natural polysaccharides.

Hybrid techniques of pre and assisted processing modify structural, physicochemical and functional characteristics of okra pectin: Controlled-temperature ultrasonic-assisted extraction from preparative dry powders and its field monitoring

Diversiform okra dry powders were prepared and controlled-temperature ultrasonic-assisted extraction (CTUAE) was then utilized to obtain okra pectin (OP) from the preparative powders. During processing of hybrid techniques, 6 types of dry powders were prepared through different drying technologies (hot air drying, HD; freeze-drying, FD) and meshes (60, 80, 120 meshes) at first. Next, the extraction yield, physicochemical and function characteristics, and molecular structure of OP were analyzed with or without CTUAE technique. Meanwhile, the time-frequency domains of acoustic fields during extraction process of OP were monitored to analyze the effects of ultrasonic fields. Results showed that OP main chains with less cracking by FD than that by HD; the yield, GalA, esterification degree (DE), M_w and viscosity of OP increased, but its particle size decreased. Water holding capacity (WHC) and oil holding capacity (OHC) of OP by HD were more prominent. Secondly, HD OP had dendritic rigid chains, while FD OP had flexible chains with multiple branches. For HD OP, as meshes of okra dry powders decreased, GalA, viscosity and emulsification ability decreased; while gel strength and thermal stability increased. For FD OP, the reduction of meshes improved thermal stability. Above all, CTUAE technique increased the yield and GalA, and decreased DE, M_w and particle size of OP. In terms of functional characteristics, the technique also improved gel strength, resilience and viscoelasticity, enhanced emulsifying stability, WHC and thermal stability, and reduced viscosity. Finally, the correlation between functional and structural characteristics of OP was quantified, and some suggestions were made for its application in food areas.

Structuring functional mayonnaise incorporated with Himalayan walnut oil Pickering emulsions by ultrasound assisted emulsification

Nowadays Pickering emulsions have attracted immense attention due to their enhanced stability and numerous food applications. In this context, the present study was aimed to introduce Pickering emulsions stabilized by soy protein isolate (SPI)-maltodextrin (MD)-pectin complex incorporated with Himalayan walnut oil (HWO) for development of novel mayonnaise by ultrasound assisted emulsification. The functional mayonnaise was characterised for its stability, structural, textural, rheological and morphological properties. The rheological and microstructure measurements indicated that use of SPI-pectin HWO emulsions had a viscoelastic solid behaviour (G' > G″) with highly interconnected gel-like network structure leading to diffused oil droplet distribution. An increase in particle size diameter (1.86-5.09 µm) and hardness values (43.16-69.08 N) was seen with increase in the SPI-pectin wall material concentration. A significant reduction in whiteness (L* value) from 91.12 to 53.52 was noted during storage for encapsulated samples. Mayonnaise formulations containing encapsulated HWO depicted significantly lower peroxide value (2.65 meqO₂/kg) after extended storage period in comparison to free oil (8.33 meqO₂/kg). FTIR analysis of mayonnaise formulations depicted successful complexation of HWO with SPI-MD-pectin matrix. These findings would be of immense importance in designing of Pickering emulsions stabilized by protein-polysaccharide particles with aim of delivering nutraceuticals associated with myriad health benefits.

Effects of multi-frequency ultrasonic on the physicochemical properties and bioactivities of polysaccharides from different parts of ginseng

The effect of multi-frequency ultrasonic extraction (MUE) on the yields, physicochemical properties, antioxidant and α-glucosidase inhibitory activities of polysaccharides (GPs) from different parts of ginseng were compared. Results demonstrated that yields of polysaccharides from different parts were found to vary significantly differences, in the order of roots (M-GRPs) > flowers (M-GFPs) > leaves (M-GLPs). Compared with heat reflux extraction, MUE not only increased the yield of GPs by up to 9.14%-210.87%, with higher uronic acid content (UAC: increased by 4.99%-53.48%), total phenolics content (TPC: increased by 7.60% to 42.61%), total flavonoids content (TFC: increased by 2.52%-5.45%), and lower molecular weight (Mw: reduced by 6.51%- 33.08%) and protein content (PC: reduced by 5.15%-8.95%), but also improved their functional properties and bioactivities. All six purified polysaccharides extracted by MUE were acidic pyran polysaccharide with different monosaccharide composition, possessed remarkable antioxidant and α-glucosidase inhibitory activities. Especially, M-GFP-1 exhibited the highest bioactivities, illustrated that the activities were highly correlated with UAC and TPC, Mw, and triple helical structure. These results indicate that MUE was an efficient technique for improving yields, physicochemical and functional properties and enhancing biological activities of polysaccharide.

Trends in "green" and novel methods of pectin modification - A review

Modification of hydrocolloids to alter their functional properties using chemical methods is well documented in the literature. There has been a recent trend of adopting eco-friendly and "green" methods for modification. Pectin, being a very important hydrocolloid finds its use in various food applications due to its gelling, emulsifying, and stabilizing properties. The adoption of various "green" methods can alter the properties of pectin and make it more suitable for incorporation in food products. The novel approaches such as microwave and pulsed electric field can also be utilized for solvent-free modification, making it desirable from the perspective of sustainability, as it reduces the consumption of organic chemicals. Pectic oligosaccharides (POSs) produced via novel approaches are being explored for their biological properties and incorporation in various functional foods. The review can help to set the perspective of potential scale-up and adoption by the food industry for modification of pectin.

Physicochemical characteristics and functional properties of high methoxyl pectin with different degree of esterification

Moderate alkali de-esterification can change the physicochemical characteristics and thus the functional properties of high methoxyl pectin (HMP). The results revealed that de-esterification could increase negative charges (Zeta potential from -21 to -31 mV), decrease molecular weight (from 448 to 136 kDa) and apparent viscosity of HMP. Homogalacturonan (HG) content decreased (from 62% to 49%) while rhamnogalacturonan Ⅰ (RG-Ⅰ) content increased (from 32% to 46%) after de-esterification. The group characteristics of HMP with different degree of esterification (DE) were similar and no obvious impact was made on degree of crystallinity by alkali de-esterification. A conformation transition of HMP molecule implied by Congo red test were occurred as the DE decreased. With the decrease of DE, the molecular structure of HMP became shorter and smaller, and the entanglement was weaker. The de-esterification caused slight decrease of thermal stability. Alkali de-esterification would weaken the gel property and the emulsifying ability of HMP.

Investigation of the pectin grafting with gallic acid and propyl gallate and their antioxidant activities, antibacterial activities and fresh keeping performance

In this paper, a method for the enzymatic modification of pectin, in which gallic acid (GA) and propyl gallate (PG) were grafted onto pectin molecules in an aqueous/organic two-phase system catalyzed by lipase, was proposed. The potential reaction mechanism was explored through UV-Vis, FTIR and ¹H NMR spectroscopic methods and density functional theory. Results suggested that the lipase played a dual role during the modification by catalyzing the hydrolysis of methyl ester bonds of pectin in the aqueous phase and the esterification between the 4-OH of GA and PG and the -COOH of pectin in the organic phase. Moreover, the effects of GA and PG on the antioxidant and the antibacterial activities of pectin were evaluated, and results showed that the antioxidant and the antibacterial activities of modified pectin were better than those of native pectin. The effect of modified pectin on the quality of fresh bass (Lateolabrax maculatus) was further studied. Results suggested that, compared to control group, the total viable count, histamine level, malondialdehyde content and acid value of bass fillets treated with modified pectin were significantly reduced, whereas the sensory score was significantly increased.

Modified Rhamnogalacturonan-Rich Apple Pectin-Derived Structures: The Relation between Their Structural Characteristics and Emulsifying and Emulsion-Stabilizing Properties

In the context of the increasing interest in natural food ingredients, the emulsifying and emulsion-stabilizing properties of three rhamnogalacturonan-rich apple pectin-derived samples were assessed by evaluating a range of physicochemical properties. An apple pectin (AP74) was structurally modified by a β-eliminative reaction to obtain a RG-I-rich pectin sample (AP-RG). Subsequent acid hydrolysis of AP-RG led to the generation of pectin material with partially removed side chains (in particular arabinose depleted) (AP-RG-hydrolyzed), thus exhibiting differences in rhamnose, arabinose, and galactose in comparison to AP-RG. All samples exhibited surface activity to some extent, especially under acidic conditions (pH 2.5). Furthermore, the viscosity of the samples was assessed in relation to their emulsion-stabilizing properties. In a stability study, it was observed that the non-degraded AP74 sample at pH 2.5 exhibited the best performance among all the apple pectin-derived samples evaluated. This emulsion presented relatively small oil droplets upon emulsion production and was less prone to creaming than the emulsions stabilized by the (lower molecular weight) RG-I-rich materials. The AP-RG and AP-RG-hydrolyzed samples presented a slightly better emulsion stability at pH 6.0 than at pH 2.5. Yet, neither pectin sample was considered having good emulsifying and emulsion-stabilizing properties, indicated by the presence of coalesced and flocculated oil droplets.

Citrus processing by-products: an overlooked repository of bioactive compounds

Citrus fruits contain plethora of bioactive compounds stored in edible as well as inedible part. Since, citrus fruits are processed mainly for juice, the residues are disposed in wastelands, hence, plenty of nutritional potential goes in vain. But if utilized wisely, the bioactive phytochemicals in citrus by-products have the ability to revolutionize the functional food industry. In the present review, the composition of citrus by-products in terms of bioactive components and their health benefits has been reviewed. Various extraction techniques used to extract these bioactives has been discussed and a brief overview of purification and utilization of the extracted compounds, in food and nutraceutical industry is also presented. Bioactives in citrus by-products are higher than the peeled fruit, which can be extracted, isolated and incorporated into food systems for development of health foods. From the studies reviewed, it was observed that research reported on utilization of citrus by-products is limited to mainly research labs; proper scale-up process and its adequate research commercialization is the need of hour to transform these bioactives into economical functional ingredients.

Influence of cations, pH and dispersed phases on pectin emulsification properties

The cooperativity of six cations (Ca²⁺, Mg²⁺, Zn²⁺, Al³⁺, Cr³⁺ and Fe³⁺), three pectins (sugar beet, high and low methyl esterified), three dispersed phases (medium chain triglycerides (MCT), orange oil and hexadecane), time (30 days) and pH (2.0 and 6.0) has been investigated in the formation and stability against coarsening of oil-in-water emulsions. Cations generally influenced emulsion stability in the following order (most stable) Ca²⁺ ​> ​Mg²⁺ ​> ​Al³⁺ ​> ​Cr³⁺ ​> ​Zn²⁺ ​> ​Fe³⁺ (least stable). This order largely coincided with that of the strength of pectin-cation interactions showing that the higher the affinity of cation for pectin the less stable the emulsion. More stable emulsions were formed with sugar beet pectin, which was also unresponsive to the presence of cations, followed by high- and then low-methyl esterified samples. At pH 2.0 all pectins showed their best emulsification performance whereas shifting pH to 6.0 severely impaired emulsification capacity and longer term stability against droplet growth. Smaller droplets were created with hexadecane under all conditions studied followed by MCT and orange oil in agreement with their aqueous solubilities. The present results advance our understanding of the stabilisation of emulsions using pectin and allow us to tailor their functionality for applications in food, pharmaceutical and biomedical industries.

•

Cations influence stability in the order: Ca²⁺ ​> ​Mg²⁺ ​> ​Al³⁺ ​> ​Cr³⁺ ​> ​Zn²⁺ ​> ​Fe³⁺.

•

Pectins showed best emulsification performance at pH 2.0

•

Pectins showed poor emulsification performance at pH 6.0

•

Pectin stability order: sugar beet ​> ​high methoxy ​> ​low methoxy pectin.

•

Oil stability order at pH 2.0: hexadecane ​< ​medium chain triglycerides ​< ​orange oil.

Complexing hemp seed protein with pectin for improved emulsion stability

Hemp seed protein has the potential to be used in food systems as an emulsifying agent; however, there are still some shortcomings associated with hemp seed protein, such as poor solubility and tendency to aggregate. This study aims to improve the dispersibility of hemp seed protein as an emulsifier by complexing with pectin, driven by electrostatic force. Three protein to pectin ratios were used for complexation, from 1:1, 2:1 to 4:1. The complexation improved the polydispersity of hemp seed protein when dispersed in the aqueous phase. The hemp seed protein displayed multimodal size distribution in water at pH = 3.0 due to aggregation, while the incorporation of pectin helped to diminish those aggregated proteins. When the hemp seed protein was used to stabilize the oil-in-water emulsion, its stabilized emulsion showed promising homogenous droplet size distribution after emulsification. However, during the accelerated storage conditions (55°C), the emulsion stabilized solely by hemp seed protein was subjected to extensive coalescence. From day 0 to 9, the droplet size (d_4,3 ) increased by 50 folds from 3.215 to 161.6 µm. In contrast, the hemp seed protein-pectin complex exhibited extraordinary stability during the storage test, where size evolution in all three samples was negligible compared to the emulsion stabilized by hemp seed protein. Rheological characterization suggests that pectin provided physical strength, which may help the emulsion droplets to maintain structural integrity under environmental stress. The underlying mechanism could be associated with the formation of a three-dimensional structure by pectin through bridging adjacent emulsion droplets. PRACTICAL APPLICATION: Hemp seed protein is gaining more and more attention as an emerging plant protein. Recently, hemp seed protein has been explored as an emulsifier, but its stabilized emulsion encounters instability issues during storage. Our study suggests pectin could be used as a co-stabilizer for hemp seed protein emulsions.

Latest developments in the applications of microfluidization to modify the structure of macromolecules leading to improved physicochemical and functional properties

Microfluidization is a unique high-pressure homogenization technique combining various forces such as high-velocity impact, high-frequency vibration, instantaneous pressure drop, intense shear rate, and hydrodynamic cavitation. Even though it is mainly used on emulsion-based systems and known for its effects on particle size and surface area, it also significantly alters physicochemical and functional properties of macromolecules including hydration properties, solubility, viscosity, cation-exchange capacity, rheological properties, and bioavailability. Besides, the transformation of structure and conformation due to the combined effects of microfluidization modifies the material characteristics that can be a base for new innovative food formulations. Therefore, microfluidization is being commonly used in the food industry for various purposes including the formation of micro- and nano-sized emulsions, encapsulation of easily degradable bioactive compounds, and improvement in functional properties of proteins, polysaccharides, and dietary fibers. Although the extent of modification through microfluidization depends on processing conditions (e.g., pressure, number of passes, solvent), the nature of the material to be processed also changes the outcomes significantly. Therefore, it is important to understand the effects of microfluidization on each food component. Overall, this review paper provides an overview of microfluidization treatment, summarizes the applications on macromolecules with specific examples, and presents the existing problems.

Nano-technological approaches for plant and marine-based polysaccharides for nano-encapsulations and their applications in food industry

Novel food preservation methods, along with preservatives have been employed to prevent food products from spoilage. There is an increasing demand to substitute synthetic preservatives with natural bioactive compounds since they are safe and environmentally friendly. Bioactive compounds with functional and therapeutic properties are found in foods and have also beneficial physiological and immunological health effects. However, there are some issues associated with bioactive compounds, such as low stability, solubility, and permeability. Encapsulation techniques, especially nano-encapsulation, are a promising technique to overcome these restrictions. A range of the plants' constituents can be converted into bio-nanomaterials. Major plant constituents are polysaccharides which have good biocompatibility properties and therapeutic activities, such as antioxidant, antiviral, anti-inflammatory, anti-allergic, and anti-tumor. Among plant and marine-based polysaccharides, cellulose, starch, alginates, chitosan, and carrageenans have been used as carrier materials to preserve core material. Moreover, many studies indicated that favorable sources such as plant and marine based polysaccharides are emerging. This chapter will cover plant and marine-based polysaccharides for nano-encapsulation and their application in the food industry.