Green and rapid preparation of long-term stable aqueous dispersions of fullerenes and endohedral fullerenes: The pros and cons of an ultrasonic probe

Recent advancement in ultrasound-assisted novel technologies for the extraction of bioactive compounds from herbal plants: a review

Herbal plants comprise potent bioactives, and they have a potential for the development of functional foods. Ultrasonication technology can be used to enhance the efficiency and quality of these bioactivities. The present review discussed the ultrasound-assisted novel extraction technologies (supercritical carbon dioxide (CO2) and high pressurized liquid), including mechanistic understanding, influencing factors, extract process efficiency, and the recovery of bioactives with an industrial perspective. The strong observations of this study are the novel ultrasound-induced extraction process variables, such as ultrasound amplitude, sonication time, temperature, solid-solvent ratio, and pressure, are significantly influenced and must be optimized for maximum recovery of bioactives. The novel green technologies (ultrasound and assisted) could remarkably improve the extraction efficiency and enhance the quality of green extract. This review will support technological understanding about the impact on process parameters for the extraction of bioactives for the development of functional foods and nutraceuticals.

Green and Sustainable Ultrasound-Assisted Anodic Electrochemical Preparation of Graphene Oxide Dispersions and Their Antioxidant Properties

A fast method for preparing aqueous graphene oxide (GO) dispersions by electrochemical oxidation of a graphite anode without preliminary intercalation with oxidizing agents is proposed. Ultrasonic probing was used in the modulation mode of ultrasonic waves (work/rest) for more efficient graphite oxidation-exfoliation. It is shown that the 4/2 s mode of ultrasonic modulation is the most effective due to the probe material's low corrosion while maintaining the optimum synthesis temperature not exceeding 30-35 °C and achieving the best characteristics of the resulting product. Three cases of anodic oxidation of graphite to obtain graphene oxide were considered: (1) a combined cathode-anode compartment, (2) a split cathode-anode salt-bridged compartment, and (3) separated anode compartment with a 3.5 kDa dialysis membrane. It was determined that the approach to synthesis with a divided cathode-anode compartment makes it possible to obtain GO sheets with fewer defects compared to chemical methods or methods with a combined cathode-anode compartment and makes it possible to control the oxidation degree of the material (C:O ratio) by varying the current density. The prepared samples showed good stability for more than six months. The spectral and morphological characteristics were studied. Using chemiluminometry in the luminol/Co(II)/H₂O₂ system, the antioxidant properties concerning three key reactive oxygen species (H₂O₂, superoxide anion radical, and hydroxyl radical) were demonstrated. It was also shown that the prepared GO dispersions do not induce lipid and phospholipid peroxidation.

S/Se-Terchalcogenophene-C60 Dyads: Synthesis and Characterization of Optical and Photosensitizing Properties

Fullerenes have been long investigated for application as singlet oxygen sources. Even though they possess high photosensitizing efficiency, their practical use is still limited, mostly because of insufficient absorption of visible and/or near-infrared light. This limitation can be overcome by introducing organic chromophores that absorb longer-wavelength light, either by covalent attachment to C₆₀ or by its encapsulation in a polymeric matrix. In this work, we investigated the photosensitizing properties of the C₆₀ molecule functionalized with organic units comprising thiophene or selenophene rings. The chemical structures of the synthesized dyads were characterized by nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry. The influence of the S/Se atoms and vinyl linkage between the organic unit and C₆₀ on the absorptive and emissive properties of the dyads was investigated and correlated with their photosensitizing activity. For the latter, we used a standard chemical singlet oxygen trap. A selected dyad C₆₀ThSe₂ was also applied as a source of singlet oxygen in a model photocatalyzed synthesis of the fine chemical juglone from 1,5-dihydroxynapthalene.

Effects of Aqueous Dispersions of C60, C70, and Gd@C82 Fullerenes on DNA Oxidative Damage/Repair and Apoptosis in Human Embryonic Lung Fibroblasts

Fullerenes and metallofullerenes play an active role in homeostasis of reactive oxygen species and may cause oxidative damage to cells. As pristine fullerenes are a basis for derivatization, studying oxidative DNA damage/repair and apoptosis is important in terms of genotoxicity and cytotoxicity for their biomedical application. Aqueous dispersions of C₆₀, C₇₀, and Gd@C₈₂ (5 nM and 1.5 μM) were cultured with human fetal lung fibroblasts for 1, 3, 24, and 72 h. Oxidative DNA damage/repair was assessed through concentration of 8-oxodG, double-strand breaks, and activation of BRCA1. Activity of apoptosis was assessed through the BCL2/BAX ratio. All three fullerenes caused oxidative modification of DNA at the early stages; C₆₀ caused the most long-term damage, Gd@C₈₂ caused the most short-term damage, and C₇₀ caused "wave-like" dynamics. The dynamics of DNA repair correlated with the dynamics of oxidative damage, but Gd@C₈₂ caused more prolonged activation of the repair system than C₆₀ or C₇₀. The oxidative toxicity of Gd@C₈₂, is minor and the oxidative toxicity of C₆₀ is mild and short-term, in contrast to C₇₀. In relation to the studied effects, the fullerenes can be arranged in a safety row of Gd@C₈₂ > C₆₀ > C₇₀.

Photochromic and Luminescent Properties of a Salt of a Hybrid Molecule Based on C60 Fullerene and Spiropyran-A Promising Approach to the Creation of Anticancer Drugs

For the first time a pyrrolidinofullerene salt containing a spiropyran group and an ammonium group, capable of reversibly reacting to UV radiation, has been synthesized. Photoinduced reactions of the synthesized compounds were studied using absorption and luminescence spectroscopies, spectral and kinetic characteristics were measured. The hybrid molecule was found to exhibit intrinsic fluorescence even in the spirocyclic form. The C₆₀ derivative showed a higher stability and better spectral and luminescent properties than the precursor.

High-Throughput Preparation of Uncontaminated Graphene-Oxide Aqueous Dispersions with Antioxidant Properties by Semi-Automated Diffusion Dialysis

A semi-automated diffusion-dialysis purification procedure is proposed for the preparation of uncontaminated graphene oxide (GO) aqueous dispersions. The purification process is integrated with analytical-signal processing to control the purification degree online by several channels: oxidation-reduction potential, conductivity, and absorbance. This approach reduces the amounts of reagents for chemical treatment during dialysis. The total transition metal (Mn and Ti) content was reduced to a sub-ppb level (assessed by slurry nebulization in inductively coupled plasma optical atomic emission spectroscopy). Purified aqueous GO samples possess good stability for about a year with a zeta-potential of ca. -40 mV and a lateral size of ca. sub-µm. Purified GO samples showed increased antioxidant properties (up to five times compared to initial samples according to chemiluminometry by superoxide-radical (O₂^-) generated in situ from xanthine and xanthine oxidase with the lucigenin probe) and significantly decreased peroxidase-like activity (assessed by the H₂O₂-L-012 system).

Unexpected Colloidal Stability of Fullerenes in Dimethyl Sulfoxide and Related Systems

It is known that fullerenes are poorly soluble in polar solvents, but readily form colloidal solutions in such media. These solutions are typically solvophobic (hydrophobic when prepared in water), that is, thermodynamically unstable colloidal systems with negatively charged particles. To understand the stability factors of a colloidal system, the thresholds for coagulation of a sol or suspension by electrolytes are of key importance. While hydrosols and aqueous suspensions coagulate at concentrations of 1:1 inorganic electrolytes about 0.1-0.2 M, in acetonitrile and methanol, the corresponding critical concentrations of coagulation are ca. 3 orders of magnitude lower. Given the wide variety of properties of organic solvents, it seemed important to complete the picture to study solvents with more basic properties. This is all the more reasonable since electrophilic fullerenes are in fact Lewis acids. Our choice was dimethyl sulfoxide, DMSO, and related solvent systems. The colloidal solutions of fullerenes C₆₀ and C₇₀ in DMSO and N,N-dimethyl formamide, DMF, are unexpectedly easy to prepare by mechanical methods, and addition of water leads to formation of relatively stable organo-hydrosols. UV-visible spectra and dynamic light scattering were used to characterize the solutions of C₆₀ and C₇₀ in DMSO, benzene-DMSO, acetonitrile-DMSO, and benzene-acetonitrile-DMSO systems, as well as in DMF. Our present study demonstrated that, in contrast to organosols in methanol and acetonitrile, colloids of C₇₀ and C₆₀ fullerenes in DMSO and DMF are surprisingly as stable with respect to electrolytes as the corresponding hydrosols are. Such high stability is caused by the non-DLVO interactions, or, in terms proposed by Churaev and Derjaguin, by the so-called structural effect. These results shed light on the nature of the solvation of colloidal fullerene particles in solvents of various chemical natures.

Thermal Conductivity of Detonation Nanodiamond Hydrogels and Hydrosols by Direct Heat Flux Measurements

The methodology and results of thermal conductivity measurements by the heat-flow technique for the detonation nanodiamond suspension gels, sols, and powders of several brands in the range of nanoparticle concentrations of 2-100% w/w are discussed. The conditions of assessing the thermal conductivity of the fluids and gels (a FOX 50 heat-flow meter) with the reproducibility (relative standard deviation) of 1% are proposed. The maximum increase of 13% was recorded for the nanodiamond gels (140 mg mL-1 or 4% v/v) of the RDDM brand, at 0.687 ± 0.005 W m-1 K-1. The thermal conductivity of the nanodiamond powders is estimated as 0.26 ± 0.03 and 0.35 ± 0.04 W m-1 K-1 for the RUDDM and RDDM brands, respectively. The thermal conductivity for the aqueous pastes containing 26% v/v RUDDM is 0.85 ± 0.04 W m-1 K-1. The dignities, shortcomings, and limitations of this approach are discussed and compared with the determining of the thermal conductivity with photothermal-lens spectrometry.

Effects of Aqueous Dispersions of C60, C70 and Gd@C82 Fullerenes on Genes Involved in Oxidative Stress and Anti-Inflammatory Pathways

Background: Fullerenes and metallofullerenes can be considered promising nanopharmaceuticals themselves and as a basis for chemical modification. As reactive oxygen species homeostasis plays a vital role in cells, the study of their effect on genes involved in oxidative stress and anti-inflammatory responses are of particular importance. Methods: Human fetal lung fibroblasts were incubated with aqueous dispersions of C₆₀, C₇₀, and Gd@C₈₂ in concentrations of 5 nM and 1.5 µM for 1, 3, 24, and 72 h. Cell viability, intracellular ROS, NOX4, NFκB, PRAR-γ, NRF2, heme oxygenase 1, and NAD(P)H quinone dehydrogenase 1 expression have been studied. Results & conclusion: The aqueous dispersions of C₆₀, C₇₀, and Gd@C₈₂ fullerenes are active participants in reactive oxygen species (ROS) homeostasis. Low and high concentrations of aqueous fullerene dispersions (AFD) have similar effects. C₇₀ was the most inert substance, C₆₀ was the most active substance. All AFDs have both “prooxidant” and “antioxidant” effects but with a different balance. Gd@C₈₂ was a substance with more pronounced antioxidant and anti-inflammatory properties, while C₇₀ had more pronounced “prooxidant” properties.

Antioxidant Potential of Aqueous Dispersions of Fullerenes C60, C70, and Gd@C82

The antioxidant potential (capacity and activity) of aqueous fullerene dispersions (AFD) of non-functionalized C60, C70, and Gd@C82 endofullerene (in micromolar concentration range) was estimated based on chemiluminescence measurements of the model of luminol and generation of organic radicals by 2,2'-azobis(2-amidinopropane) dihydrochloride (ABAP). The antioxidant capacity was estimated by the TRAP method, from the concentration of half-suppression, and from the suppression area in the initial period. All three approaches agree and show that the antioxidant capacity of AFDs increased in the order Gd@C82 < C70 < C60. Mathematical modeling of the long-term kinetics data was used for antioxidant activity estimation. The effect of C60 and C70 is found to be quenching of the excited product of luminol with ABAP-generated radical and not an actual antioxidant effect; quenching constants differ insignificantly. Apart from quenching with a similar constant, the AFD of Gd@C82 exhibits actual antioxidant action. The antioxidant activity in Gd@C82 is 300-fold higher than quenching constants.