Influence of ultrasonic combined supercritical-CO2 electrodeposition process on copper film fabrication: Electrochemical evaluation

Supercritical-CO2 mediated preparation of porous carbon from Araucaria heterophylla biomass: A proficient nanomolar detection platform for phenolic water pollutant

4-aminophenol (AP), an aromatic phenolic compound, is commonly found in commercial products that eventually enter and pollute environmental water sources. The precise detection and quantification of AP in environmental samples are critical for comprehensively assessing contamination levels, safeguarding public health, and formulating effective remediation strategies. In the shed of light, this work proposes an electrochemical sensing platform for detecting and quantifying AP using Araucaria heterophylla biomass-derived activated carbon (AH-AC) prepared via the SC-CO2 pathway. To evaluate the significance of SC-CO2-mediated chemical activation (SC-AHAC), a comparative study with conventional activation methods (C-AHAC) was also conducted. The physical characterizations such as structural, morphological, optical, and elemental analysis demonstrate the greater ID/IG value and enhanced surface functionalities of SC-AHAC than C-AHAC. The obtained lower empirical factor (R) value of 1.89 for SC-AHAC suggests increased disorder and a higher presence of single-layer amorphous carbon compared to C-AHAC (2.03). In the electrochemical analysis, the active surface area of the SC-AHAC modified electrode (0.069 cm2) is higher than that of the C-AHAC modified electrode (0.061 cm2), demonstrating the significance of SC-CO2 activation. Further, the quantitative analysis on SC-AHAC@SPCE resulted in a sensitivity of 3.225 μA μM-1 cm-2 with the detection limit and quantification limit of 2.13 and 7.11 nM L-1, respectively, in the linear range of 0.01-582.5 μM L-1 at the oxidation potential of 0.13V. This suggests that the prepared SC-AHAC could be a promising electrocatalyst for AP detection in the environmental and healthcare sectors.

Supercritical CO2 mediated construction of aluminium waste recovered γ-Al2O3 impregnated Dracaena trifasciata biomass-derived carbon composite: A robust electrocatalyst for mutagenic pollutant detection

Inspired by the waste-to-wealth concept, we have recovered the gamma phase aluminium oxide nanoparticles (γ-Al2O3 NPs) from waste aluminium (Al) foils and fabricated a composite with Dracaena trifasciata biomass-derived activated carbon matrix (DT-AC) using supercritical carbon-di-oxide (SC-CO2) pathway. The prepared samples are characterized altogether by various micro- and spectroscopic analyses. Based on the results, the recovered γ-Al2O3 NPs are well impregnated in the DT-AC surface by the action of the microbubble effect from the SC-CO2. The higher D-band and ID/IG value of 1.07 in the Al2O3/DT-AC nanocomposite indicate increased defects and the amorphous nature of the carbon materials. The effect of scan rate (ν) demonstrated greater linearity in ν1/2 vs peak current in the electrochemical detection study of the mutagenic pollutant 4-(methylamino) phenol hemi sulfate, showing a quasi-reversible electron transfer process undergoing diffusion-controlled kinetics. Furthermore, the limit of detection is determined to be 3.2 nM L-1 with an extensive linear range, spanning from 0.05 to 618.25 µM/L. The incredible sensitivity of 2.117 μA μM-1 cm-2, along with excellent selectivity, repeatability, and stability, is observed. Further, the respectable recovery percentage of 98.61 % in the environmental water sample is perceived. The observed outcomes suggest that the prepared Al2O3/DT-AC composite performs as an excellent electrocatalyst material, and the processing techniques used are thought to be sustainable in nature.

A biogenesis construction of CuO@MWCNT via Chenopodium album extract: an effective electrocatalyst for synaptic plasticity neurodegenerative drug pollutant detection

Clioquinol (CLQ) is one of the most toxic halogenated neurodegenerative drugs, and its synaptic plasticity effect directly affects human health and the environment. Cupric oxide (CuO) is an ideal electrocatalyst owing to its earth-abundance, non-toxic nature, and cost-effectiveness. Since phenolate oxygen and pyridine nitrogen in CLQ act as an electron donor and pave the way for detection with Cu2+ ions in the CuO. Designing the architecture of CuO with a multi-walled carbon nanotube (MWCNT) is a sensible strategy to improve the electrochemical activity of the developed sensor. Inspired by the bio-synthesis and green processing, we have demonstrated the in-situ synthesis of CuO nanosphere-decorated MWCNT by Chenopodium album leaf extract through a sonochemical approach and explored its electrochemical sensing performance toward CLQ. The physical comprehensive characterization of prepared nanocomposite was investigated by various microscopic and spectroscopic techniques. For comparison studies, the CuO nanosphere was prepared by the same preparation process without MWCNT. Based on the physical characterization outcomes, the morphological nature of CuO was observed to be a sphere-like structure, which was decorated on the MWCNT with an average crystallite size of 16 nm (± 1 nm). Based on the electrochemical studies, the fabricated nanocomposite exhibits a wider linear range of 0.025-1375 μM, with a minimum detection limit of 4.59 nM L-1 toward CLQ. The viability examination on the biological matrix obtained considerable spike recoveries.

A new class of layered Bi2O2S nanopetals by one-pot supercritical-CO2 approach: A reliable electrocatalyst for analgesic bioflavonoid detection

Nanomaterials frequently draw a lot of interest in a variety of disciplines, including electrochemistry. Developing a reliable electrode modifier for the selective electrochemical detection of the analgesic bioflavonoid i.e., Rutinoside (RS) is a great challenge. Here in, we have explored the supercritical-CO₂ (SC-CO₂) mediated synthesis of bismuth oxysulfide (SC-BiOS) and reported it as a robust electrode modifier for the detection of RS. For a comparison study, the same preparation procedure was carried out in the conventional approach (C-BiS). The morphology, crystallography, optical, and elemental contribution analyses were characterized to understand the paradigm shift in the physicochemical properties between SC-BiOS and C-BiS. The results exposed the C-BiS had a nano-rod-like structure with a crystallite size of 11.57 nm; whereas the SC-BiOS had a nano-petal-like structure with a crystallite size of 9.03 nm. The B_2g mode in the optical analysis confirms the formation of bismuth oxysulfide by the SC-CO₂ method with the Pmnn space group. As an electrode modifier, the SC-BiOS achieved a higher effective surface area (0.074 cm²), higher electron transfer kinetics (0.13 cm s^-1), and lower charge transfer resistance (403 Ω) than C-BiS. Further, it provided a wide linear range of 0.1-610.5 μM L^-1 with a low detection and quantification limit of 9 and 30nM L^-1 and an appreciable sensitivity of 0.706 μA μM^-1 cm^-2. The selectivity, repeatability, and real-time application towards the environmental water sample with a recovery of 98.87% were anticipated for the SC-BiOS. This SC-BiOS unlocks a fresh avenue to construct a design for the family of electrode modifiers utilized in electrochemical applications.

Recovery of Al2O3 from hazardous Al waste as a reinforcement particle for high-performance Ni/Al2O3 corrosion resistance coating via ultrasonic-aided supercritical-CO2 electrodeposition

The unprocessed dumping of aluminium wastes in the landscape leads to generation of heat and toxic gases, which are detrimental to the ecosystem. Motivated by the waste-to-wealth notion, we demonstrated the recovery of aluminium oxide nanoparticles (Al₂O₃NPs) from domestic aluminium wastes via a sonochemical approach and synthesis of nickel/aluminium oxide (Ni/Al₂O₃) coating via ultrasonic-coupled supercritical carbon dioxide (US-SC-CO₂) electrodeposition method for higher corrosion resistance performance. The physical characterization and material confirmation of prepared films were examined by microscopic and various spectroscopic techniques. The electrochemical corrosion resistance studies were explored via potentiodynamic polarization and electrochemical impedance spectroscopy techniques. Based on the results, the US-SC-CO₂ strategy exposed an improved distribution of Al₂O₃ NPs assimilation in Ni matrix, higher corrosion resistance, and microhardness. The integration of ultrasonic irradiation into the SC-CO₂ process promises an enhanced coating quality. Thereby, the novel US-SC-CO₂ approach for Ni/Al₂O₃ synthesis is expected to achieve a sustainable green impact in real-world applications.