Structural requirements for assembly and homotypic interactions of the hepatitis C virus core protein

Activation of the Ca2+/NFAT Pathway by Assembly of Hepatitis C Virus Core Protein into Nucleocapsid-like Particles

Hepatitis C virus (HCV) is the primary pathogen responsible for liver cirrhosis and hepatocellular carcinoma. The main virion component, the core (C) protein, has been linked to several aspects of HCV pathology, including oncogenesis, immune evasion and stress responses. We and others have previously shown that C expression in various cell lines activates Ca²⁺ signaling and alters Ca²⁺ homeostasis. In this study, we identified two distinct C protein regions that are required for the activation of Ca²⁺/NFAT signaling. In the basic N-terminal domain, which has been implicated in self-association of C, amino acids 1–68 were critical for NFAT activation. Sedimentation analysis of four mutants in this domain revealed that association of the C protein into nucleocapsid-like particles correlated with NFAT-activated transcription. The internal, lipid droplet-targeting domain was not required for NFAT-activated transcription. Finally, the C-terminal ER-targeting domain was required in extenso for the C protein to function. Our results indicate that targeting of HCV C to the ER is necessary but not sufficient for inducing Ca²⁺/NFAT signaling. Taken together, our data are consistent with a model whereby proteolytic intermediates of C with an intact transmembrane ER-anchor assemble into pore-like structures in the ER membrane.

The rate of hepatitis C virus infection initiation in vitro is directly related to particle density

To gain a more complete understanding of hepatitis C virus (HCV) entry, we initially assessed the rate at which HCV initiates productive attachment/infection in vitro and discovered it to be slower than most viruses. Since HCV, including cell culture-derived HCV (HCVcc), exhibits a broad-density profile (1.01-1.16 g/ml), we hypothesized that the varying densities of the HCVcc particles present in the inoculum may be responsible for this prolonged entry phenotype. To test this hypothesis, we show that during infection, particles of high density disappeared from the viral inoculum sooner and initiated productive infection faster than virions of low density. Moreover, we could alter the rate of attachment/infection initiation by increasing or decreasing the density of the cell culture medium. Together, these findings demonstrate that the relationship between the density of HCVcc and the density of the extracellular milieu can significantly impact the rate at which HCVcc productively interacts with target cells in vitro.

Core as a novel viral target for hepatitis C drugs

Hepatitis C virus (HCV) infects over 130 million people worldwide and is a major cause of liver disease. No vaccine is available. Novel specific drugs for HCV are urgently required, since the standard-of-care treatment of pegylated interferon combined with ribavirin is poorly tolerated and cures less than half of the treated patients. Promising, effective direct-acting drugs currently in the clinic have been described for three of the ten potential HCV target proteins: NS3/NS4A protease, NS5B polymerase and NS5A, a regulatory phosphoprotein. We here present core, the viral capsid protein, as another attractive, non-enzymatic target, against which a new class of anti-HCV drugs can be raised. Core plays a major role in the virion's formation, and interacts with several cellular proteins, some of which are involved in host defense mechanisms against the virus. This most conserved of all HCV proteins requires oligomerization to function as the organizer of viral particle assembly. Using core dimerization as the basis of transfer-of-energy screening assays, peptides and small molecules were identified which not only inhibit core-core interaction, but also block viral production in cell culture. Initial chemical optimization resulted in compounds active in single digit micromolar concentrations. Core inhibitors could be used in combination with other HCV drugs in order to provide novel treatments of Hepatitis C.

A disulfide-bonded dimer of the core protein of hepatitis C virus is important for virus-like particle production

Hepatitis C virus (HCV) core protein forms the nucleocapsid of the HCV particle. Although many functions of core protein have been reported, how the HCV particle is assembled is not well understood. Here we show that the nucleocapsid-like particle of HCV is composed of a disulfide-bonded core protein complex (dbc-complex). We also found that the disulfide-bonded dimer of the core protein (dbd-core) is formed at the endoplasmic reticulum (ER), where the core protein is initially produced and processed. Mutational analysis revealed that the cysteine residue at amino acid position 128 (Cys128) of the core protein, a highly conserved residue among almost all reported isolates, is responsible for dbd-core formation and virus-like particle production but has no effect on the replication of the HCV RNA genome or the several known functions of the core protein, including RNA binding ability and localization to the lipid droplet. The Cys128 mutant core protein showed a dominant negative effect in terms of HCV-like particle production. These results suggest that this disulfide bond is critical for the HCV virion. We also obtained the results that the dbc-complex in the nucleocapsid-like structure was sensitive to proteinase K but not trypsin digestion, suggesting that the capsid is built up of a tightly packed structure of the core protein, with its amino (N)-terminal arginine-rich region being concealed inside.

Role of RNA structures in genome terminal sequences of the hepatitis C virus for replication and assembly

Hepatitis C virus (HCV) is a positive-strand RNA virus replicating its genome via a negative-strand [(-)] intermediate. Little is known about replication signals residing in the 3' end of HCV (-) RNA. Recent studies identified seven stem-loop structures (SL-I', -IIz', -IIy', -IIIa', -IIIb', -IIIcdef', and -IV') in this region. In the present study, we mapped the minimal region required for RNA replication to SL-I' and -IIz', functionally confirmed the SL-IIz' structure, and identified SL-IIIa' to -IV' as auxiliary replication elements. In addition, we show that the 5' nontranslated region of the genome most likely does not contain cis-acting RNA structures required for RNA packaging into infectious virions.

Structure and dynamics of the N-terminal half of hepatitis C virus core protein: an intrinsically unstructured protein

Hepatitis C virus core protein plays an important role in the assembly and packaging of the viral genome. We have studied the structure of the N-terminal half of the core protein (C82) which was shown to be sufficient for the formation of nucleocapsid-like particle (NLP) in vitro and in yeast. Structural bioinformatics analysis of C82 suggests that it is mostly unstructured. Circular dichroism and structural NMR data indicate that C82 lacks secondary structure. Moreover, NMR relaxation data shows that C82 is highly disordered. These results indicate that the N-terminal half of the HCV core protein belongs to the growing family of intrinsically unstructured proteins (IUP). This explains the tendency of the hepatitis C virus core protein to interact with several host proteins, a well-documented characteristic of IUPs.

Cutting the gordian knot-development and biological relevance of hepatitis C virus cell culture systems

Worldwide approximately 180 million people are chronically infected with hepatitis C virus (HCV). HCV isolates exhibit extensive genetic heterogeneity and have been grouped in six genotypes and various subtypes. Additionally, several naturally occurring intergenotypic recombinants have been described. Research on the viral life cycle, efficient therapeutics, and a vaccine has been hampered by the absence of suitable cell culture systems. The first system permitting studies of the full viral life cycle was intrahepatic transfection of RNA transcripts of HCV consensus complementary DNA (cDNA) clones into chimpanzees. However, such full-length clones were not infectious in vitro. The development of the replicon system and HCV pseudo-particles allowed in vitro studies of certain aspects of the viral life cycle, RNA replication, and viral entry, respectively. Identification of the genotype 2 isolate JFH1, which for unknown reasons showed an exceptional replication capability and resulted in formation of infectious viral particles in the human hepatoma cell line Huh7, led in 2005 to the development of the first full viral life cycle in vitro systems. JFH1-based systems now enable in vitro studies of the function of viral proteins, their interaction with each other and host proteins, new antivirals, and neutralizing antibodies in the context of the full viral life cycle. However, several challenges remain, including development of cell culture systems for all major HCV genotypes and identification of other susceptible cell lines.

Intragenotypic JFH1 based recombinant hepatitis C virus produces high levels of infectious particles but causes increased cell death

The full-length hepatitis C virus (HCV) JFH1 genome (genotype 2a) produces moderate titers of infectious particles in cell culture but the optimal determinants required for virion production are unclear. It has been shown that intragenotypic recombinants encoding core to NS2 from J6CF in the context of JFH1 are more robust in the release of viral particles. To understand the contributions of structural and nonstructural genes to HCV replication potential and infectivity, we have characterized intragenotypic recombinant genotype 2a viruses with different portions of the J6 isolate engineered into the JFH1 infectious clone. All genomes produced high levels of intracellular HCV RNA and NS3 protein in Huh-7.5 transfected cells. However, JFH1 genomes containing J6 sequences from C to E2 (CE2) or C to p7 (Cp7) secreted up to 100-fold more infectious HCV particles than the parental JFH1 clone. Subsequent infection of naive Huh-7.5 cells with each of the J6/JFH1 recombinants at a multiplicity of infection of 0.0003 resulted in high viral titers only for CE2 and Cp7 viruses. Comparison of virion production by the Cp7 J6/JFH1 recombinant to previously described J6/JFH1 recombinants showed flexibility of the chimeric junction. Moreover, NTRNS2 a chimeric virus equivalent to the previously reported FL-J6/JFH chimera, showed a 10-fold enhancement of virus titers compared to CNS2. NTRNS2 differs from CNS2 by three nucleotide differences residing in the 5' NTR and core coding sequence and all three nucleotide changes were necessary for increased virion production. Importantly, cells producing Cp7 virus showed increased apoptosis compared with JFH1, an effect correlating with virion production. These studies begin to unravel requirements for robust virus replication and the relationship between increased virion production and host cell viability.