Screening and selection of technologically applicable microorganisms for recovery of rare earth elements from fluorescent powder

Pathway to industrial application of heterotrophic organisms in critical metals recycling from e-waste

The transition to renewable energies and electric vehicles has triggered an unprecedented demand for metals. Sustainable development of these technologies relies on effectively managing the lifecycle of critical raw materials, including their responsible sourcing, efficient use, and recycling. Metal recycling from electronic waste (e-waste) is of paramount importance owing to ore-exceeding amounts of critical elements and high toxicity of heavy metals and organic pollutants in e-waste to the natural ecosystem and human body. Heterotrophic microbes secrete numerous metal-binding biomolecules such as organic acids, amino acids, cyanide, siderophores, peptides, and biosurfactants which can be utilized for eco-friendly and profitable metal recycling. In this review paper, we presented a critical review of heterotrophic organisms in biomining, and current barriers hampering the industrial application of organic acid bioleaching and biocyanide leaching. We also discussed how these challenges can be surmounted with simple methods (e.g., culture media optimization, separation of microbial growth and metal extraction process) and state-of-the-art biological approaches (e.g., artificial microbial community, synthetic biology, metabolic engineering, advanced fermentation strategies, and biofilm engineering). Lastly, we showcased emerging technologies (e.g., artificially synthesized peptides, siderophores, and biosurfactants) derived from heterotrophs with the potential for inexpensive, low-impact, selective and advanced metal recovery from bioleaching solutions.

Extraction of rare earth Eu from waste blue phosphor strengthened by microwave alkali roasting

Spent phosphor is an important secondary resource for extracting rare earth elements. Microwave absorption properties and enhanced extraction of Eu from blue phosphor by microwave alkali roasting were studied. Dielectric properties of alkali roasting system were measured by resonator perturbation method. Dielectric constant increases linearly from 250 °C until it reaches a peak at 400 °C. The dielectric loss reaches a higher value at 400-550 °C, due to the strong microwave absorption properties of molten alkali and roasted products. Effects of roasting temperature, roasting time and alkali addition amount on Eu leaching were investigated. The phosphor was completely decomposed into Eu2O3, BaCO3 and MgO at 400 °C. The alkaline decomposition process of phosphor is more consistent with diffusion control model with Eα being 28.9 kJ/mol. Effects of the main leaching conditions on Eu leaching were investigated. The leaching kinetic of Eu was in line with diffusion control model with Eα being 5.74 kJ/mol. The leaching rules of rare earths in the mixed phosphor were studied. The results showed that the presence of red and green phosphor affected the recovery of blue phosphor. The optimum process parameters of rare earth recovery in single blue phosphor and mixed phosphor were obtained, and the recovery of Eu were 97.81% and 94.80%, respectively. Microwave alkali roasting promoted the dissociation of phosphor and leaching of rare earths. The results can provide reference for the efficient and selective recovery of rare earths in phosphors.

Exploring the untapped practices in bacterial-fungal mixed-based cultures for acidic treatment of metal-enriched printed circuit board waste

This study explores the extraction of metals from spent mobile phone printed circuit boards (SMPhPCBs) to address environmental and resource depletion concerns. The challenges in metal recovery from SMPhPCBs arise due to their complex composition and high metal content. While previous research has primarily focused on using bio-cyanide, bio-sulfate, and bio-ferric compounds from acidophilic bacteria, the potential of bio-oxalic acid for SMPhPCBs treatment and the alteration of their complex structure has not yet been explored. Additionally, this study suggests evaluating the untapped potential of Aspergillus niger in oxalic acid production through mixed cultures with bacteria, marking a pioneering approach. A unique culture of Bacillus megaterium and A. niger was created, inducing bio-stress by bacterial metabolites, including gluconic acid (2683 mg/l) and live/dead bacterial cells in a medium with glucose deficiency. Results demonstrated reducing sugar consumption and oxalic acid over-production in mixed cultures compared to pure cultures, ranging from 1350 to 4951 mg/l at an initial glucose concentration (IGC) of 10 g/l and 4276 to 7460 mg/l at IGC 20 g/l. This over-production is attributed to proposed fungal signaling mechanisms to bacteria. Metal extraction using organic acids and siderophores at 10 g/l pulp density, 24 h, and 60 °C yielded Mn (100 %), Pt (100 %), Pd (70.7 %), Fe (50.8 %), Co (48.3 %), Al (21.8 %), among others. The final valuable residue containing copper, gold, and silver holds potential for future recycling. The study concludes with XRD and FTIR analyses to assess the bioleaching effect on the bio-leached powder.

Exploring the potential reuse of phosphogypsum: A waste or a resource?

Phosphogypsum (PG), the main industrial by-product of phosphate fertilizer industry, primarily consists of calcium sulfate dihydrate. However, it contains various impurities with variable quantities depending on the origin of the phosphate rock. These impurities can restrict the reuse of phosphogypsum as a secondary primary resource. Consequently, large quantities of produced PG are stored in surface stockpiles that occupy extensive land areas and may pose a significant risk of ecological contamination to the surroundings. Researchers have shown growing interest in addressing the worldwide accumulation of this waste material. To gain a comprehensive understanding of the environmental impact of phosphogypsum, it is crucial to explore its properties (e.g., chemistry, mineralogy, radioactivity), and how it interacts with the surrounding environment, enabling well-informed decisions decision regarding its management and its valorization. In this review, we will i) explore the chemical, radiological and mineralogical characteristics of PG; ii) discuss the environmental concerns related to land discharge and sea disposal; and iii) examine the latest advancements in various valorization techniques developed including agriculture, REE extraction, environmental application, chemical and thermal transformation, and also construction sector. Outlining their limitations and challenges restrict in the global variability of phosphogypsum (PG), technical and economic limitations, and the potential for secondary pollution in select valorization approaches. This requires a thorough assessment and comparison with conventional disposal alternatives.

A Critical Review of the Enhanced Recovery of Rare Earth Elements from Phosphogypsum

The increasing demand for rare earth elements (REEs), especially from new and innovative technology, has strained their supply, which makes the exploration of new REE sources necessary, for example, the recovery of REEs from phsophogypsum (PG). PG is a byproduct during the wet production of phosphoric acid, which is an attractive secondary resource for REEs due to a large amount of REEs locked in them. In most cases, REEs contained in PG are mainly encapsulated in the gypsum crystal, leading to a low leaching efficiency. Therefore, it is particularly important to use various methods to enhance the leaching of REEs from PG. In this review, we summarized and classified various enhanced leaching methods for the recovery of REEs from PG, and the advantages and disadvantages of different methods were compared. A joint method of recrystallization and RIL may be a promising enhanced leaching approach for the recovery of REEs from PG. Recrystallization could achieve both the complete REE release and simultaneous preparation of industrial materials with high value added, such as high-strength α-hemihydrate gypsum by phase transformation of PG, and the RIL technology could adsorb the releasing REEs and realize their efficient extraction. Such a combination appears to show significant advantages because of high REE recovery, as well as high value-added product preparation at low cost.

Effective recovery of rare earth from (bio)leaching solution through precipitation of rare earth-citrate complex

Bioleaching is considered an alternative to traditional rare earth extraction technology. However, since rare earth elements exist as complexes in bioleaching lixivium, they cannot be directly precipitated by normal precipitants, which restricts their further development. This structurally stable complex is also a common challenge in various types of industrial wastewater treatment. In this work, a new method called a three-step precipitation process is first proposed to efficiently recover rare earth-citrate (RE-Cit) complexes from (bio)leaching lixivium. It consists of coordinate bond activation (carboxylation by pH adjustment), structure transformation (Ca²⁺ addition) and carbonate precipitation (soluble CO₃^2- addition). The optimization conditions are determined to adjust the lixivium pH to around 2.0, then add calcium carbonate until the n(Ca²⁺): n(Cit^3-) is more than 1.4:1 and lastly add sodium carbonate until n(CO₃^2-): n(RE³⁺) is more than 4:1. The results of precipitation experiments using imitated lixivium show that the rare earth yield is more than 96% and the impurity aluminum yield is less than 20%. Subsequently, pilot tests (1000 L) using real lixivium were successfully conducted. The precipitation mechanism is briefly discussed and proposed by thermogravimetric analysis, Fourier infrared spectroscopy, Raman spectroscopy and UV spectroscopy. This technology is promising in the industrial application of rare earth (bio)hydrometallurgy and wastewater treatment due to its advantages of high efficiency, low cost, environmental friendliness and simple operation.

Challenges and opportunities for sustainable valorization of rare earth metals from anthropogenic waste

Progressively and projected integration of rare earth metals (REMs) in modern technologies, especially in the clean energy, consumer electronics, aerospace, automotive, and defense sectors, place REMs as critical raw materials in the supply chain and strategic metal from the fourth industrial revolution perspective. Current REM production from the primary mineral resources in the supply chain versus industrial demand is at a bottleneck. Alternatively, REM-bearing anthropogenic wastes are pertinent and potent to addressing the critical supply chain bottleneck. Although secondary REM resources are prudent to address the critical supply chain bottleneck, the absence of effective and efficient technologies to recover these REMs from anthropogenic waste imposes challenges and provides opportunities. Hence, this review analyses and discusses the significance of anthropogenic wastes for REM recovery, the status of recycling technologies for sustainable valorization of REMs, challenges, and opportunities. The current review covers the potential quantitative REM wealth locked in various anthropogenic waste like (i) spent rare earth permanent magnets, (ii) spent batteries, (iii) spent tri-band REM phosphors, (iv) bauxite industry residue red mud, (v) blast furnace slag and (v) coal mines, and coal byproducts and status of valorization technologies for circularizing the REMs. In industrial waste like red mud, steelmaking slag, blast furnace slag, and coal fly ash typically 109,000, 2000, 39,000, and 354,000 tons of REM get scrapped, respectively, in a conservative estimation. In the years 2020 and 2021, respectively, 240,000 and 280,000 tons of REM were produced by mine production in contrast to 504,000 tons of REM that were scrapped with REM-bearing industrial waste. This review revealed that total REM currently getting scrapped with anthropogenic waste versus projected REM demand for the years 2022, 2023, 2024, and 2025 could be standing at 2.66, 2.51, 2.37, and 2.23, respectively. Our investigation revealed that efficient recovery of REMs from anthropogenic waste is significant and promising but associated with challenges like lack of industrial-scale valorization process, lack of a clear strategy, road map, policy, effort, funding, and diversified research.

Sustainable approach for valorization of solid wastes as a secondary resource through urban mining

The incessant population has increased the production and consumption of plastics, paper, metals, and organic materials, which are discarded as solid waste after their end of life. The accumulation of these wastes has created growing concerns all over the world. However, conventional methods of solid waste management i.e., direct combustion and landfilling have caused several negative impacts on the environment (releasing toxic chemicals and greenhouse gases, huge land use) besides affecting human health. Therefore, it is requisite to determine sustainable alternative technologies that not only help in mitigating environmental issues but also increase the economic value of the discarded solid wastes. This process is known as urban mining where waste is converted into secondary resources and thereby conserves the natural primary resources. Thus, this review highlights the technological advancements in the valorization process of discarded wastes and their sustainable utilization. We also discussed several limitations of the existing urban mining processes and further the feasibility of valorization techniques was critically analyzed from a techno-economical perspective. This paper recommends a novel sustainable model based on the circular economy concept, where waste is urban mined and recovered as a secondary resource to support the united nations sustainable development goals (SDGs). The implementation of this model will ultimately help the developing countries to achieve the target of SDGs 11, 12, and 14.

Post-measurement compressed calibration for ICP-MS-based metal quantification in mine residues bioleaching

Bioleaching is an actual economical alternative to treat residues, which allows, depending on the chosen strategy, two possible outcomes: (1) a leachate enriched with target metals, or (2) a residue enriched in target metals through the leaching of interfering components (IC). This work aimed to study the metals released by bioprocessing the Panasqueira mine tailings, as a strategy to increase critical metals' relative concentration in residues. Biostimulation of the local microbiota was compared to a bioaugmentation approach using the autochthonous Diaphorobacter polyhydroxybutyrativorans strain B2A2W2. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was selected to study the metals released in the leachate through multi-element external standards. A new data treatment method was developed to use a preliminary sweep of intensities to quantify the non-initial target metals concentration in the leachate, based on preliminary ICP-MS intensity measurements. The results demonstrated that biostimulation was an efficient bioleaching strategy for the IC silicon, aluminium, magnesium, selenium, manganese, zinc, iron, and copper, by decreasing concentration, resulting in a relative increase in the gallium and yttrium (10x) levels in the treated residue. The strategy followed to quantify a large number of elements with ICP-MS using a reduced number of data points for calibration proved valid and speeded up the analytical process.

Potential uses of phosphogypsum: A review

Phosphogypsum (PG) is a by-product of the phosphate fertilizer industry that is produced during the phosphoric acid production process. Annual global PG production ranges between 100 to 300 Mt, with only 15% of that utilized while the rest is usually placed on large dumps with potential serious human and environmental impacts. The aim of this study is to give an overview and to evaluate the existing and potential uses of PG that extend from soil stabilization to cement and chemical industry and for agricultural to geotechnical, human impacts, and environmental applications. More specifically, PG can be used as a substitute in the cement industry, in building materials and in road construction, as a fertilizer for soil improvement, as a raw material for the production of some chemicals, and as a backfilling material for the rehabilitation of abandoned mines and quarries, while the recovery of gypsum and the extraction of rare earth elements signifies the potential importance of PG to cyclic economy. The paper offers an extensive overview of existing and potential uses of PG, discusses their adequacy, and reveals that PG can be widely used under certain conditions, rather than disposed as waste in stockpiles.

Phytomining of rare earth elements - A review

The increasing demand for rare earth elements (REEs) for modern industry has led to a surge in mining activities and consequently has released these metals into the environment. Intensifying REEs in a habitat has impacts on its ecosystem, but on the other side, it also provides the opportunity to recover REEs from low-grade minerals. Phytomining has emerged as an ecologically sound technique to extract these valuable elements from contaminated soils where traditional mining is not competitive. This paper presents and reviews the concept of REE phytomining from three scientific areas. The accumulation of rare earth metals in plants is the first stage, referred to as the phytoextraction process. This is followed by elevating REE concentrations into bio-ores via the enrichment phase. Ultimately, extraction is the final step to complete the phytomining pathway for reclaiming REEs in brownfield land.

Scandium-microorganism interactions in new biotechnologies

Scandium (Sc) plays a special role in high-tech industries because of its wide application in green, space, and defense technologies. However, Sc mining and purification are problematic due to political, technological, and environmental difficulties. The deficit of this element limits global technological development. One sustainable solution to this problem is to use microorganisms to extract Sc from ore and waste, as well as to concentrate and separate it from other elements. Sc also demonstrates attractive metabolic effects on microbes that is of great interest in white biotechnology. Sc increases the production of proteins and secondary metabolites and activates poorly expressed genes. This review offers a comprehensive analysis of current knowledge on the application of Sc-microorganism interactions in promising biotechnologies, its perspectives, and future challenges.

Microbial biominers: Sequential bioleaching and biouptake of metals from electronic scraps

Electronic scraps (e-scraps) represent an attractive raw material to mine demanded metals, as well as rare earth elements (REEs). A sequential microbial-mediated process developed in two steps was examined to recover multiple elements. First, we made use of an acidophilic bacteria consortium, mainly composed of Acidiphilium multivorum and Leptospidillum ferriphilum, isolated from acid mine drainages. The consortium was inoculated in a dissolution of e-scraps powder and cultured for 15 days. Forty-five elements were analyzed in the liquid phase over time, including silver, gold, and 15 REEs. The bioleaching efficiencies of the consortium were >99% for Cu, Co, Al, and Zn, 53% for Cd, and around 10% for Cr and Li on Day 7. The second step consisted of a microalgae-mediated uptake from e-scraps leachate. The strains used were two acidophilic extremotolerant microalgae, Euglena sp. (EugVP) and Chlamydomonas sp. (ChlSG) strains, isolated from the same extreme environment. Up to 7.3, 4.1, 1.3, and 0.7 µg by wet biomass (WB) of Zn, Al, Cu, and Mn, respectively, were uptaken by ChlSG biomass in 12 days, presenting higher efficiency than EugVP. Concerning REEs, ChlSG biouptake 14.9, 20.3, 13.7, 8.3 ng of Gd, Pr, Ce, La per WB. Meanwhile, EugVP captured 1.1, 1.5, 1.4, and 7.5, respectively. This paper shows the potential of a microbial sequential process to revalorize e-scraps and recover metals and REEs, harnessing extremotolerant microorganisms.

Biohydrometallurgy for Rare Earth Elements Recovery from Industrial Wastes

Biohydrometallurgy recovers metals through microbially mediated processes and has been traditionally applied for the extraction of base metals from low-grade sulfidic ores. New investigations explore its potential for other types of critical resources, such as rare earth elements. In recent times, the interest in rare earth elements (REEs) is growing due to of their applications in novel technologies and green economy. The use of biohydrometallurgy for extracting resources from waste streams is also gaining attention to support innovative mining and promote a circular economy. The increase in wastes containing REEs turns them into a valuable alternative source. Most REE ores and industrial residues do not contain sulfides, and bioleaching processes use autotrophic or heterotrophic microorganisms to generate acids that dissolve the metals. This review gathers information towards the recycling of REE-bearing wastes (fluorescent lamp powder, spent cracking catalysts, e-wastes, etc.) using a more sustainable and environmentally friendly technology that reduces the impact on the environment.

Rare Earths’ Recovery from Phosphogypsum: An Overview on Direct and Indirect Leaching Techniques

The need for rare earths elements (REEs) in high tech electrical and electronic based materials are vital. In the global economy, deposits of natural REEs are limited except for countries such as China, which has prompted current attempts to seek alternative resources of REEs. This increased the dependence on major secondary rare earth-bearing sources such as scrap alloy, battery waste, spent catalysts, fly ash, spent magnets, waste light-emitting diodes (LEDs), and phosphogypsum (PG) for a substantial recovery of REEs for use. Recycling of REEs from these alternative waste sources through hydrometallurgical processes is becoming a sustainable and viable approach due to the low energy consumption, low waste generation, few emissions, environmentally friendliness, and economically feasibility. Industrial wastes such as the PG generated from the production of phosphoric acid is a potential secondary resource of REEs that contains a total REE concentration of over 2000 mg/kg depending upon the phosphate ore from which it is generated. Due to trace concentration of REEs in the PG (normally < 0.1% wt.) and their tiny and complex occurrence as mineral phases the recovery process of REE from PG would be highly challenging in both technology and economy. Various physicochemical pre-treatments approaches have been used up to date to up-concentrate REEs from PG prior to their extraction. Methods such as carbonation, roasting, microwave heating, grinding or recrystallization have been widely used for this purpose. This present paper reviews recent literature on various techniques that are currently employed to up-concentrate REs from PG to provide preliminary insight into further critical raw materials recovery. In addition, the advantages and disadvantages of the different strategies are discussed as avenues for realization of REE recovery from PG at a larger scale. In all the different approaches, recrystallization of PG appears to show promising advantages due to both high REE recovery as well as the pure PG phase that can be obtained.

Leaching of rare earth elements and base metals from spent NiMH batteries using gluconate and its potential bio-oxidation products

Gluconate is known to mediate metal leaching. However, during bioleaching by e.g., Gluconobacter oxydans, gluconate can be oxidized to 2-ketogluconate and 5-ketogluconate. The impact of bio-oxidation of gluconate on metal leaching has not been investigated. Therefore, the aim of this study was to investigate leaching of rare earth elements (REEs) and base metals from spent nickel-metal-hydride (NiMH) batteries using gluconate, 2-ketogluconate and 5-ketogluconate. Batch leaching assays were conducted under controlled and uncontrolled pH conditions for 14 days using 60 mM of either the individual leaching agents or their various combinations. At target pH of 6.0 ± 0.1 and 9.0 ± 0.1 and without pH control, complexolysis was the dominating leaching mechanism and higher REE leaching efficiency was obtained with gluconate, while 5-ketogluconate enabled more efficient base metal leaching. At target pH of 3.0 ± 0.1, acidolysis dominated, and the base metal and REE leaching yields with all the tested leaching agents were higher than under the other studied pH conditions. The highest base metal and REE leaching yields (%) were obtained using gluconate at target pH of 3.0 ± 0.1 being 100.0 Mn, 90.3 Fe, 89.5 Co, 58.5 Ni, 24.0 Cu, 29.3 Zn and 56.1 total REEs. The obtained results are useful in optimization of heterotrophic bioleaching.

Extraction of valuable metals from discarded AMOLED displays in smartphones using Bacillus foraminis as an alkali-tolerant strain

With the alarming rate of e-waste generation, resource recovery from secondary metal sources is essential for sustainable resource utilization and to prevent the release of potentially toxic elements into the environment. In the current study, the first-time extraction of Ag, Mo, and Cu from active-matrix organic light-emitting diode (AMOLED) screens of discarded smartphones have been achieved using organic acids produced by Bacillus foraminis cultured on a modified Horikoshi medium. The influences of initial pH, inoculation size, and pulp density on the bioleaching process were evaluated over six-day experiment. Maximum extraction of Ag, Mo, and Cu (100, 56.8, and 41.4%) at optimal values of three investigated factors was obtained over a 12-day bioleaching experiment. A diverse assemblage of organic acid was produced in the optimized bioleaching condition, including tartaric (12.1 mM), formic (49.8 mM), acetic (21.5 mM), lactic (78.5 mM), citric (2.7 mM), and propionic (69.6 mM) acid. The contact angle analysis highlighted more hydrophobicity of powder after the bioleaching. FTIR and CHNO data also confirmed the role of bioleaching in the powder wettability alteration. The sequential extraction method revealed high mobility of In, Fe, Co, Cu, Cr, and Mo and low mobility of Ag. The results exhibited high tolerance of alkali-tolerant bacteria to potentially toxic elements and its superior performance in the bioleaching of discarded mobile screens at high pulp density.

Bioleaching of Uranium Tailings as Secondary Sources for Rare Earth Elements Production

Tailings from inactive uranium mine sites represent a potential secondary source of rare earth elements (REEs). For this study, two mine tailings (DT and RAT) from restored uranium sites in Ontario, Canada, were used. Bioleaching experiments were conducted with a mix of native sulfur- and iron-oxidizing bacteria to test the solubilization of REEs, U and Th at different temperatures (20, 30 and 40 °C). The selective recovery of REEs from bioleaching solution was evaluated using different ion exchange resins. The mineralogical characterization revealed that DT tailings were mainly composed of quartz, pyrite, gypsum and silicates, whereas RAT tailings were mainly composed of quartz. The maximum solubilization of heavy and light REEs (HREEs and LREEs, respectively), Th and U reached 54%, 6%, 60% and 51% for RAT after 35 days at pH 2, T = 30 °C and pulp density = 10% (w/v). Higher extraction yields were obtained for DT, with 58% of HREEs, 14% of LREEs, 85% of Th and 89% of U solubilized under the same conditions. The use of Lewatit TP272 resin for the recovery of Sc (94%) and U (99%) followed by the Lewatit SP112 resin for the recovery of Th (57%) and REEs (81% LREEs and 65% HREEs) seemed a promising method for the co-extraction of the key elements from the bioleaching solution.

Protocol to select efficient microorganisms to treat coffee wastewater

The coffee processing wastewater (CPWW) requires treatment before being disposed of in the environment or reused due to its high organic and inorganic composition and a low pH. The indigenous microbiota from CPWW is highly diverse and could be selected as inoculums in treatment waste plants. Considering the physico-chemical characteristics of wastewater coffee, we elaborate on steps to select the microbial consortium that showed positive impact via decreasing the pollutant parameters of this effluent. The effectiveness was confirmed using wastewater from different origins with different chemical characteristics. A bacterial consortium composed by Serratia marcescens CCMA 1010 and CCMA 1012, Corynebacterium flavescens CCMA 1006, and Acetobacter indonesiensis CCMA 1002 was selected as the inoculums-based phenotypic assays. The mixed inoculum showed a highly active population (11.18 log CFU mL^-1), promoting an 85% decrease in biochemical oxygen demand and a 60% decrease in chemical oxygen demand. There was also an 80% reduction in phosphorus and nitrogen. The final pH changed from 6.0 to 7.5. Additionally, the eco-toxicity using Daphnia similis was reduced by more than 59%. The microbial inoculum was efficient in the biological treatment in CPWWs, demonstrating the efficiency and robustness of the selected strains, independent of the physico-chemical characteristics of wastewater.

Comprehensive characterization and environmental risk assessment of end-of-life automotive catalytic converters to arrange a sustainable roadmap for future recycling practices

Environmentally appropriate economic recycling of spent automotive catalytic converters (SACCs) is difficult due to their complexity. The prominent reason is the lack of knowledge and comprehensive characterization of SACCs. This study focused on the characterization of SACCs in terms of their structural, morphological, physiochemical, surface, and thermal properties. The accurate determination of metals content, including 4975 mg/kg platinum group metals, 42,119 mg/kg rare earth elements, and other base metals, showed a great potential wealth in SACCs. Besides, the sequential extraction method was applied for metals fractionation, which represents a unique harsh recycling approach needed due to the stable structure of SACCs, metals embedded in silicate phases, and the presence of barely soluble metal phosphates. This waste was also examined for environmental criteria and leaching tests, including Toxicity Characteristic Leaching Procedure, Waste Extraction Test, and Synthetic Precipitation Leaching Procedure. The findings declare that Waste Extraction Test was the most aggressive procedure to assess mobility. The contamination indexes, such as risk assessment code, contamination factor, and global contamination factor, were also investigated, which show SACCs must be regarded as hazardous waste. As an example, the global contamination factor of 11.87 depicts SACCs have a moderate contamination degree.

Biological leaching of rare earth elements

The distinctive physico-chemical features of rare earth elements (REEs) have led to an increase in demand by the global market due to their multiple uses in industrial, medical and agricultural implementations. However, the scarcity of REEs and the harsh eco-unfriendly leaching processes from primary sources beside obliviousness to their recycling from secondary sources, together with the geopolitical situation, have created the need to develop a more sustainable mining strategy. Therefore, there is a growing interest in bio-hydrometallurgy, which may contribute to the scavenging of these strategic elements from low-grade resources in an environmentally friendly and economically feasible way as with copper and gold. Several prokaryotes and eukaryotes show the ability to leach REEs, however, the success in employing these microorganisms or their products in this process relays on several biotic and abiotic factors. This review focuses on the differences made by microorganisms in REEs leaching and fundamentally explains microbes-REEs interaction.

Role of microorganisms in bioleaching of rare earth elements from primary and secondary resources

In an era of environmental degradation, and water, and mineral scarcity, enhancing microbial function in sustainable mining has become a prerequisite for the future of the green economy. In recent years, the extensive use of rare earth elements (REEs) in green and smart technologies has led to an increase in the focus on recovery and separation of REEs from ore matrices. However, the recovery of REEs using traditional methods is complex and energy intensive, leading to the requirement to develop processes which are more economically feasible and environmentally friendly. The use of phosphate solubilizing microorganisms for bioleaching of REEs provides a biotechnical approach for the recovery of REEs from primary and secondary sources. However, managing and understanding the microbial-mineral interactions in order to develop a successful method for bioleaching of REEs still remains a major challenge. This review focuses on the use of microbes for the bioleaching of REEs and highlights the importance of genomic studies in order to narrow down potential microorganisms for the optimal extraction of REEs.