Amendment of municipal sewage sludge with lime and mussel shell: Effects on fate of organic matter and pharmaceutically active compounds

Influence of sewage sludge stabilization method on microbial community and the abundance of antibiotic resistance genes

Municipal sewage sludge (MSS) and other biosolids are of high interest for agriculture. These nutrient-rich organic materials can potentially serve as organic fertilizers. Besides an increase of organic matter in soil, other positive effects were shown after their application. Especially the positive influence on circular economy increased the attention paid to management of MSS in recent years. Unfortunately, the use of sewage sludge has some drawbacks. Biosolids are frequently polluted with heavy metals, xenobiotic organic compounds and industrial chemicals, which may be hazardous for the environment and humans. Here, we investigated the influence of stabilization method and the size of wastewater treatment plant on the structure of microbial communities as well as the abundance of antibiotic resistance genes (ARG) and mobile genetic elements (MGE). All tested ARG and MGE were detectable in almost all of the samples. Interestingly, the presence of MGE as well as particular heavy metals correlated positively with the presence of several ARG. We conclude that the distribution of ARG and MGE in biosolids originated from municipal wastewater treatment plants, cannot be explained by the size of the facility or the applied stabilization method. Moreover, we postulate that the presence of pollutants and long-term impacts should be assessed prior to a possible use of sewage sludge as fertilizer.

The evolution of different dissolved organic matter components and release characteristics of heavy metals in leaching process from sewage sludge under simulated rain

Pollution of municipal sewage sludge with heavy metals (HMs) inevitably causes secondary contamination, threatening ecosystems and human health. Dissolved organic matters (DOM) would serve as HMs carriers or ligands, directly influencing the transport and distribution. So it is of essential importance to simultaneously evaluate the release characteristics of HMs and DOM from MSS. In this paper, we investigated leaching characteristics of HMs (Cd, Cr, Cu, Zn, Ni, and Mn) and DOM from raw sewage sludge (RSS) and lime-conditioned sewage sludge (LCSS) under simulated rain with different acidities (pH 6.5 and 2.9) via column leaching experiments. The results showed the release of HMs could be divided into two distinct stages, a rapid decreasing changes in the early stage and a slow and steady change in the later stages with a slight increase in the middle of time. At the early stage, DOM was dominated by protein-like components (tryptophan-like, tyrosine-like). As time passed, protein-like components decreased while humic-like components (fulvic acid and humic acid) increased gradually. Protein-like components showed significant positive correlations with HMs, while humic acid-like components showed strong negative correlations with them. Moreover, the leaching efficiencies of Cd, Zn and Mn at pH 2.9 was about 1.5 times higher than that at 6.5, and the fluorescence intensity of humic-like components at pH 2.9 was higher than that at pH 6.5, suggesting that acid rain accelerated the release of HMs and the humification of DOM. Compared with the RSS, the DOM of LCSS showed noticeable differences, especially an obvious increase of the fulvic acid component. And the leaching efficiencies of Cd, Cr, Cu, Ni, and Mn in LCSS were much lower than that in RSS, indicating lime treatment retarded the release of HMs. Thus, our findings will be a guide to the treatment of HMs contaminants in MSS.

Effect of composting and amendment with biochar and woodchips on the fate and leachability of pharmaceuticals in biosolids destined for land application

Land application of biosolids can improve soil fertility and enhance crop production. However, the occurrence and persistence of pharmaceutical compounds in the biosolids may result in leaching of these contaminants to surface water and groundwater, causing environmental contamination. This study evaluated the effectiveness of two organic amendments [biochar (BC) and woodchips (WC)] for reducing the concentration and leachability (mobility) of four pharmaceuticals in biosolids derived from wastewater treatment plants in southern Ontario, Canada. The effect of 360-d composting on fate and leachabilities of target pharmaceuticals in biosolid mixtures was also investigated. Composting decreased total and leachable concentrations of pharmaceuticals in unamended and BC- and WC-amended biosolids to various degrees, from 10% up to 99% depending on the compound. Blending BC or WC into the biosolids greatly increased the removal rates of the target pharmaceuticals, while simultaneously decreasing their half-lives (t_0.5), compared to unamended biosolids. The t_0.5 of contaminants in this study followed the order: carbamazepine (304-3053 d) > gemfibrozil (42.3-92.4 d) > naproxen (15.3-104 d) > ibuprofen (12.5-19.0 d). Amendment with BC and(or) WC significantly reduced the leachability of carbamazepine, ibuprofen, and gemfibrozil to variable extents, but significantly enhanced the leachability of naproxen, compared to unamended biosolids (P < 0.05). Biochar and WC exhibited different (positive or negative) effects on the leachability of individual pharmaceuticals. Significantly lower concentrations of total and(or) leachable (mobile) pharmaceuticals were observed in amended biosolids than unamended biosolids (P < 0.05). Biochar and WC are effective amendments that can reduce the environmental impact of biosolid land applications with respect to pharmaceutical contamination.

Treatment processes to eliminate potential environmental hazards and restore agronomic value of sewage sludge: A review

Land application of sewage sludge is increasingly used as an alternative to landfilling and incineration owing to a considerable content of carbon and essential plant nutrients in sewage sludge. However, the presence of chemical and biological contaminants in sewage sludge poses potential dangers; therefore, sewage sludge must be suitably treated before being applied to soils. The most common methods include anaerobic digestion, aerobic composting, lime stabilization, incineration, and pyrolysis. These methods aim at stabilizing sewage sludge, to eliminate its potential environmental pollution and restore its agronomic value. To achieve best results on land, a comprehensive understanding of the transformation of organic matter, nutrients, and contaminants during these sewage-sludge treatments is essential; however, this information is still lacking. This review aims to fill this knowledge gap by presenting various approaches to treat sewage sludge, transformation processes of some major nutrients and pollutants during treatment, and potential impacts on soils. Despite these treatments, overtime there are still some potential risks of land application of treated sewage sludge. Potentially toxic substances remain the main concern regarding the reuse of treated sewage sludge on land. Therefore, further treatment may be applied, and long-term field studies are warranted, to prevent possible adverse effects of treated sewage sludge on the ecosystem and human health and enable its land application.

Leaching behavior and transformation of total mercury and methylmercury from raw and lime-conditioned sewage sludge under simulated rain

Mercury (Hg) that leaches from municipal sewage sludge (MSS) landfill under natural rain is of increasing concern. The column leaching experiments were conducted to investigate the leaching characteristics of total mercury (THg) and methylmercury (MeHg) as well as pH, total organic carbon (TOC), and total suspended solids (TSS) in the raw sludge (RS) and lime-conditioned sludge (LCS) under simulated rain with different acidities (pH 6.5 and 2.9). Results showed the release of MeHg in the leachates presented different patterns from THg. And the final amounts of MeHg in the MSS columns were 1.49 (RS at pH = 6.5), 1.88 (RS at 2.9), 1.97 (LCS at pH = 6.5), and 2.06 times (LCS at pH = 2.9) higher than the initial amounts, suggesting methylation of inorganic Hg (IHg) occurred in the leaching process. The leaching efficiencies of THg and MeHg in RS was lower than that in LCS, indicating lime was more favorable for the release of THg and MeHg. And lower values of pH of the simulated rain promoted the release of THg and MeHg from RS while the opposite was true for LCS. This study provides a better understanding of the release and biogeochemical transformations of Hg in MSS.

Leachability of endocrine disrupting chemicals (EDCs) in municipal sewage sludge: Effects of EDCs interaction with dissolved organic matter

In this study, experiments were performed to assess the significance of dissolved organic matter (DOM) on the leachability of four common EDCs, i.e., bisphenol A (BPA), 17α-ethinylestradiol (EE2), progesterone (PGT) and testosterone (TST), in municipal sewage sludge (MSS) under landfill conditions. The DOM was derived from two sources: MSS (MDOM), and natural soil represented by organic matter obtained from the Suwannee River (NDOM). Fluorescence excitation-emission matrix quenching combined with parallel factor analysis was adopted to characterize the interaction properties between the EDCs and DOM. The accumulative leachability of the target EDCs ranged from 0.09% (PGT) to 3.8% (TST). In particular, the leaching of BPA, EE2 and TST followed S-shaped curves, while PGT exhibited continuous leaching potential in untreated MSS. With the introduction of DOM, (i) the leachability of BPA and EE2 increased to 13.4% and 61.6%, respectively, whereas those of PGT and TST declined by 61.3% and 45.8%, respectively, and (ii) BPA, EE2 and PGT no longer reached leaching equilibrium but the S-shaped leaching property of TST persisted. The differential effects of MDOM and NDOM at identical concentrations on the EDCs leachability increased with curing time. BPA, EE2 and PGT quenched the MDOM fluorophores attributed to aromatic protein-like components. The fluorescence quenching of NDOM by BPA, EE2 and PGT was centered on soluble microbial by-product-like and humic-like substances. Compared with PGT, EE2 and BPA had greater capability for binding with DOM components largely via hydrophobic interactions, whereas PGT preferentially interacted with the DOM hydrophilic functionalities through specific interactions. TST had no binding capability but displayed potentials competing for sorption sites with DOM moieties. Our findings suggested that the management of MSS increased the risk of environmental contamination by EDCs for a long duration and that DOM was a useful indicator to predict the migration and transport properties of EDCs.

Insights into conditioning of landfill sludge by FeCl3 and lime

In this study, landfill sludge (LS) was excavated from a 10 year old full-scale sludge landfill and used to investigate effects of dosage on sludge dewaterability, rheological properties and extracellular polymeric substances (EPS) variations by FeCl₃-lime conditioning. LS had lower content of organic matters (0.28) and smaller particle size than excess sludge (ES), and greatly lower viscosity and high flowability. The suitable concentration of LS for conditioning (107.2-118.6 g/L) was much higher than that of ES (34 g/L) by rheological analysis. Both FeCl₃ and lime improved dewaterability of LS and caused decline of slime and loosely bound EPS (LB-EPS). FeCl₃ destroyed proteins in slime and LB-EPS owing to coagulation and acidification effects, weakened internal structure strength, and thus improved dewaterability. Lime addition caused alkaline hydrolysis of polysaccharides in slime and LB-EPS, reduced viscosity and flowability, and improved flowability and dewaterability for LS. The optimal dosage for dewatering using 57.6 mg lime/g dried solids (DS) and 53.6 mg FeCl₃/g DS was obtained by using an integrative response surface methodology (RSM) coupled nonlinear programming approach under water content constraint of 55%. The integrative optimization achieved 26.0% cost saving in comparison to RSM optimized condition.